Research Group: Technische-Mechanica / Structural Dynamics and Acoustics (SD&A)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2017 | 2016 | 2015 | 2013 | 2012
Number of items: 31.

2017

Jonge, Bram de and Teunter, Ruud and Tinga, Tiedo (2017) The influence of practical factors on the benefits of condition-based maintenance over time-based maintenance. Reliability engineering & system safety, 158 . 21 - 30. ISSN 0951-8320

Tiddens, W.W. and Braaksma, A.J.J. and Tinga, T. (2017) Towards Informed Maintenance Decision Making: Guiding the Application of Advanced Maintenance Analyses. In: Optimum Decision Making in Asset Management. IGI Global. ISBN 9781522506515

2016

Woldman, M. and Heide, E. van der and Tinga, T. and Masen, M.A. (2016) A Finite Element Approach to Modeling Abrasive Wear Modes. Tribology transactions . ISSN 1040-2004

Farzan Nasab, F. and Geijselaers, H.J.M. and Boer, A. de (2016) A multi-level set gradient based algorithm for buckling optimization of blended composite structures. In: 5th Aircraft Structural Design Conference, Manchester.

Da Silva Souza, F. and Oki, N. and Filho, J.V. and Loendersloot, R. and Berkhoff, A.P. (2016) Accuracy and Multi Domain Piezoelectric Power Harvesting Model using VHDL-AMS and SPICE. In: IEEE Sensors 2016, 31-10-2016 - 03-11-2016 (pp. 1 - 3).

Andela, C. and Rijsdijk, C. and Tinga, T. (2016) Best practices in maintenance performance measurement at the Netherlands armed forces. In: EuroMaintenance 2016, 30-05-2016 - 01-06-2016, Athens, Greece.

Loendersloot, R. and Battley, M. and Tinga, T. (2016) Damage Identification using Guided Waves on a Composite Skin-Stiffener Structure. In: European Workshop on Structural Health Monitoring, 05-07-2016 - 08-07-2016, Bilbao (pp. 1 - 10).

Bezemer-Krijnen, M. and Wijnant, Y.H. and Boer, A. de (2016) Experimental validation of a modelling approach to predict sound absorption for porous asphalt roads. In: ISMA2016, 19-09-2016 - 21-09-2016 (pp. 47 - 60).

Schilder, J.P. and Ellenbroek, M.H.M. and Boer, A. de (2016) Flexible multibody dynamics including hydro-elasticity. In: ISMA 2016, Leuven.

Wijker, Jacob Job (2016) Force limited random vibration testing: the computation of the semi-empirical constant C2 for a real test article and unknown supporting structure: semi-empirical method. thesis.

Sigvant, M. and Pilthammar, J. and Hol, J. and Wiebenga, J.H. and Chezan, A.R. and Carleer, B.D. and Boogaard, A.H. van den (2016) Friction and lubrication modeling in sheet metal forming simulations of a Volvo XC90 inner door. In: IDDRG 2016, 12-06-2016 - 15-06-2016, Linz (pp. 658 - 663).

Sigvant, M. and Pilthammar, J. and Hol, J. and Wiebenga, J.H. and Chezan, A.R. and Carleer, B.D. and Boogaard, A.H. van den (2016) Friction and lubrication modelling in sheet metal forming simulations of the Volvo XC90 inner door. In: Numisheet 2016, 04-09-2016 - 09-09-2016, Bristol.

Sigvant, M. and Pilthammar, J. and Hol, J. and Wiebenga, J.H. and Chezan, A.R. and Carleer, B.D. and Boogaard, A.H. van den (2016) Friction in sheet metal forming: simulations of the Volvo XC90 inner door. In: Forming Technology Forum 2016, 12-09-2016 - 13-09-2016, München.

Rijsdijk, Christiaan (2016) Maintenance is unjustifiable; an improved inference. thesis.

Hwang, J.S. and Loendersloot, R. and Tinga, T. (2016) Modal Strain Energy Based Structural Health Monitoring on Rib Stiffened Composite Panels. In: 3rd International Conference on Advances in Structural Health Management and Composite Structures, 23-08-2016 - 25-08-2016.

Eller, Tom Karl (2016) Modeling of tailor hardened boron steel for crash simulation. thesis.

Rijsdijk, C. and Werkman, S.J. and Jansen, P. and Tinga, T. (2016) Modelling failure behaviour; a case study. In: World Maintenance Conference, 05-04-2016 - 07-04-2016, Lugano, Switzerland.

Mostafa, N. and Loendersloot, R. and Tinga, T. and Reitsema, A.D. and Hordijk, D.A. (2016) Monitoring dynamic stiffness that predicts concrete structure degradation. In: Fifth International Symposium on Life-Cycle Civil Engineering, 16-10-2016 - 19-10-2016, Delft.

Tajdari, F. and Berkhoff, A.P. and Boer, A. de (2016) Numerical modeling of electrical-mechanical-acoustical behavior of a lumped acoustic source driven by a piezoelectric stack actuator. In: Proceedings ISMA 2016, Leuven (pp. 1261 - 1275).

Rijsdijk, Chris and Tinga, Tiedo (2016) Observing the effect of a policy: a maintenance case. Journal of quality in maintenance engineering, 22 (3). 277 - 301. ISSN 1355-2511

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Geijselaers, H.J.M. and Meinders, V.T. and Boogaard, A.H. van den (2016) Plasticity and fracture modeling of the heat-affected zone in resistance spot welded tailor hardened boron steel. Journal of materials processing technology, 234 . 309 - 322. ISSN 0924-0136

Bezemer-Krijnen, M. and Wijnant, Y.H. and Boer, A. de (2016) Predicting Sound Absorption of Stacked Spheres: Combining an Analytical and Numerical Approach. Acta acustica united with Acustica, 102 (6). 971 - 983. ISSN 1610-1928

Tiddens, W.W. and Braaksma, A.J.J. and Tinga, T. (2016) Towards Informed Maintenance Decision Making: Identifying and Mapping Successful Diagnostic and Prognostic Routes. In: International Working Seminar on Production Economics, 22-02-2016 - 26-02-2016, Innsbruck, Austria (pp. 439 - 450).

Pjetri, O. (2016) Two-dimensional acoustic particle velocity sensors based on a crossing wires topology. thesis.

Bezemer-Krijnen, Marieke and Wijnant, Ysbrand and Boer, Andre de (2016) Tyre-road noise measurements: influence of tyre tread and road characteristics. In: Proceedings of INTER-NOISE 2016, 45th International Congress and Exposition on Noise Control Engineering, towards a quieter future, 21-08-2016 - 24-08-2016, Hamburg (pp. 2242 - 2253).

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Tinga, T. (2016) Vibro-acoustic modulation–based damage identification in a composite skin–stiffener structure. Structural health monitoring, 15 (4). 458 - 472. ISSN 1475-9217

2015

Wits, W.W. and Bruins, R. and Terpstra, L. and Huls, R.A. and Geijselaers, H.J.M. (2015) Single scan vector prediction in selective laser melting. AddItive manufacturing, 9 . 1 - 6. ISSN 2214-8604

2013

Wijnant, Y.H. and Kuipers, E.R. and Boer, A. de (2013) An alternative coefficient for sound absorption. In: 25th International Conference on Noise and Vibration Engineering, ISMA 2012, 17-09-2012 - 19-09-2012, Leuven, Belgium (pp. 85 - 94).

Wijker, J.J. and Ellenbroek, M.H.M. and Boer, A. de (2013) Characterization and synthesis of random acceleration vibration specifications. In: COMPDYN 2013, 12-06-2013 - 14-06-2013, Kos Island, Greece (pp. 1 - 30).

Dikmen, E. and Hoogt, P.J.M. van der and Boer, A. de and Aarts, R.G.K.M. and Jonker, J.B. (2013) Flow Induced Instability on High Speed Mini Rotors in Laminar Flow. Journal of vibration and acoustics, 135 (2). 024502-1 - 024502-5. ISSN 1048-9002

2012

Loendersloot, R. and Grouve, W.J.B. and Lamers, E.A.D. and Wijskamp, S. (2012) Textile impregnation with thermoplastic resin - models and application. In: Flow Processes in Composite Materials, 09-07-2012 - 12-07-2012, Auckland, NZ (pp. 344 - 351).

This list was generated on Sun May 28 06:57:38 2017 CEST.