Research Group: Produktietechniek / Production Technology (PT)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Number of items: 58.

Article

Scorticati, D. and Illiberi, A. and Bor, T.C. and Eijt, S.W.H. and Schut, H. and Römer, G.R.B.E. and Lange, D.F. de and Huis in 't Veld, A.J. (2014) Annealing of SnO2 thin films by ultra-short laser pulses. Optics express, 22 (S3). A607 - A621. ISSN 1094-4087

Visser, H.A. and Caimmi, F. and Pavan, A. (2013) Characterising the fracture toughness of polymers at moderately high rates of loading with the use of instrumented tensile impact testing. Engineering fracture mechanics, 101 . 67 - 79. ISSN 0013-7944

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. Key engineering materials, 554-557 . 1014 - 1021. ISSN 1013-9826

Geijselaers, H.J.M. and Bor, T.C. and Hilkhuijsen, P. and Boogaard, A.H. van den (2015) Cyclic shear behavior of austenitic stainless steel sheet. Computer methods in materials science = Informatyka w Technologii Materialow, 15 (1). 9 - 18. ISSN 1641-8581

Fernandez Rivas, D. and Betjes, J. and Verhaagen, B. and Bouwhuis, W. and Bor, T.C. and Lohse, D. and Gardeniers, J.G.E. (2013) Erosion evolution in mono-crystalline silicon surfaces caused by acoustic cavitation bubbles. Journal of applied physics, 113 (6). 1 - 13. ISSN 0021-8979

Haanappel, S.P. and Thije, R.H.W. ten and Sachs, U. and Rietman, A.D. and Akkerman, R. (2014) Formability analyses of uni-directional and textile reinforced thermoplastics. Composites. Part A : Applied science and manufacturing, 56 . 80 - 92. ISSN 1359-835X

Sachs, U. and Haanappel, S.P. and Rietman, A.D. and Thije, R.H.W. ten and Akkerman, R. (2013) Formability of fiber-reinforced thermoplastics in hot press forming process based on friction properties. Key engineering materials, 554-557 . 501 - 506. ISSN 1013-9826

Haanappel, S.P. and Sachs, U. and Thije, R.H.W. ten and Rietman, A.D. and Akkerman, R. (2012) Forming of Thermoplastic Composites. Key engineering materials, 504-506 . 237 - 242. ISSN 1013-9826

Rietman, A.D. and Haanappel, S.P. and Thije, R.H.W. ten and Akkerman, R. (2012) Forming simulation sensitivity study of the double-dome benchmark geometry. Key engineering materials, 504-506 . 301 - 306. ISSN 1013-9826

Cornelissen, Bo and Rooij, Matthijn B. de and Rietman, Bert and Akkerman, Remko (2014) Frictional behavior of carbon fiber tows: a contact mechanics model of tow–tow friction. Textile research journal, 84 (14). 1476 - 1488. ISSN 0040-5175

Cornelissen, B. and Rietman, A.D. and Akkerman, R. (2013) Frictional behaviour of high performance fibrous tows: Friction experiments. Composites. Part A : Applied science and manufacturing, 44 . 95 - 104. ISSN 1359-835X

Cornelissen, B. and Rooij, M.B. de and Rietman, A.D. and Akkerman, R. (2013) Frictional behaviour of high performance fibrouws tows: A contact mechanics model of tow -metal friction. Wear, 305 (1-2). 78 - 88. ISSN 0043-1648

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2015) Investigation of process induced warpage for pultrusion of a rectangular hollow profile. Composites. Part B : Engineering, 68 . 365 - 374. ISSN 1359-8368

Ven, E.C. van de and Chairuna, A. and Merle, G.E.L. and Benito, S.P. and Borneman, Z. and Nijmeijer, D.C. (2013) Ionic liquid doped polybenzimidazole membranes for high temperature proton exchange membrane fuel cell applications. Journal of power sources, 222 . 202 - 209. ISSN 0378-7753

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Boogaard, A.H. van den (2015) Large strain cyclic behavior of metastable austenic stainless steel. Materials science & engineering A, 631 . 166 - 172. ISSN 0921-5093

Baran, Ismet and Akkerman, Remko and Hattel, Jesper H. (2014) Material characterization of a polyester resin system for the pultrusion process. Composites. Part B : Engineering, 64 . 194 - 201. ISSN 1359-8368

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko and Tutum, Cem C. (2015) Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches. Applied composite materials, 22 (1). 99 - 118. ISSN 0929-189X

Dewo, P. and Houwen, E.B. van der and Sharma, P.K. and Magetsari, R. and Bor, T.C. and Vargas-Llona, L.D. and Horn, J.R. van and Busscher, H.J. and Verkerke, G.J. (2012) Mechanical properties of Indonesian-made narrow dynamic compression plate. Journal of the mechanical behavior of biomedical materials, 13 . 93 - 101. ISSN 1751-6161

Baran, Ismet and Akkerman, Remko and Hattel, Jesper H. (2014) Modelling the pultrusion process of an industrial L-shaped composite profile. Composite structures, 118 (1). 37 - 48. ISSN 0263-8223

Demcenko, A. and Akkerman, R. and Nagy, P.B. and Loendersloot, R. (2012) Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVC. NDT & E international, 49 . 34 - 39. ISSN 0963-8695

Grouve, W.J.B. and Warnet, L. and Rietman, A.D. and Akkerman, R. (2012) On the weld strength of in situ tape placed reinforcements on weave reinforced structures. Composites. Part A : Applied science and manufacturing, 43 (9). 1530 - 1536. ISSN 1359-835X

Grouve, W.J.B. and Warnet, L. and Rietman, B. and Visser, H.A. and Akkerman, R. (2013) Optimization of the tape placement process parameters for carbon–PPS composites. Composites. Part A : Applied science and manufacturing, 50 . 44 - 53. ISSN 1359-835X

Baran, Ismet and Tutum, Cem C. and Hattel, Jesper H. (2014) Probabilistic analysis of a thermosetting pultrusion process. Science and engineering of composite materials . ISSN 0792-1233

Baran, Ismet and Tutum, Cem C. and Hattel, Jesper H. and Akkerman, Remko (2015) Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulation. International journal of material forming . ISSN 1960-6206

Baran, Ismet and Hattel, Jesper H. and Tutum, Cem C. and Akkerman, Remko (2015) Pultrusion of a vertical axis wind turbine blade part-II: combining the manufacturing process simulation with a subsequent loading scenario. International journal of material forming . ISSN 1960-6206

Palacios-Aguilera, N.B. and Visser, H.A. and Sridhar, A. and Balda-Irurzun, U. and Vargas-Llona, L.D. and Zhou, J. and Akkerman, R. and French, P.J. and Bossche, A. (2013) Reliable inkjet-printed interconnections on foil-type li-ion batteries. IEEE transactions on device and materials reliability, 13 (1). 136 - 145. ISSN 1530-4388

Zwaag, S. van der and Grande, A.M. and Post, W. and Garcia, S.J. and Bor, T.C. (2014) Review of current strategies to induce self-healing behaviour in fibre reinforced polymer based composites. Materials science and technology, 30 (13). 1633 - 1641. ISSN 0267-0836

Haanappel, S.P. and Akkerman, R. (2014) Shear characterisation of uni-directional fibre reinforced thermoplastic melts by means of torsion. Composites. Part A : Applied science and manufacturing, 56 . 8 - 26. ISSN 1359-835X

Wolthuizen, D.J. and Thije, R.H.W. ten and Akkerman, R. (2013) Simple tests as critical indicator of intra-ply shear locking. Key engineering materials, 554-557 . 512 - 520. ISSN 1013-9826

Baran, Ismet and Carlone, Pierpaolo and Hattel, Jesper H. and Palazzo, Gaetano S. and Akkerman, Remko (2014) The Effect of Product Size on the Pulling Force in Pultrusion. Key engineering materials, 611-612 . 1763 - 1770. ISSN 1013-9826

Cornelissen, B. and Rietman, A.D. and Rooij, M.B. de and Akkerman, R. (2012) Tow mechanics: a contact mechanics approach of friction in fibrous tows during forming. Key engineering materials, 504-506 . 325 - 330. ISSN 1013-9826

Luiten-Olieman, M.W.J. and Raaijmakers, M.J.T. and Winnubst, A.J.A. and Bor, T.C. and Wessling, M. and Nijmeijer, A. and Benes, N.E. (2012) Towards a generic method for inorganic porous hollow fibers preparation with shrinkage-controlled small radial dimensions, applied to Al2O3, Ni, SiC, stainless steel, and YSZ. Journal of membrane science, 407-408 . 155 - 163. ISSN 0376-7388

Book Section

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2013) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: New Trends in Smart Technologies. Fraunhofer Verlag, Stuttgart, 99 - 108. ISBN 9783839605776

Conference or Workshop Item

Ravenhorst, J.H. van and Rietman, A.D. and Akkerman, R. (2013) Braiding take-up speed optimization - case studies. In: 19th international conference on composite materials, ICCM19, Montreal, July 28 - August 2, 2013, 28-07-2013 - 02-08-2013, Montreal, Canada.

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Characterisation of Recycled (Glas/TPU woven fabric) Flake Reinforced Thermoplastic Composite. In: SAMPE Benelux student meeting: book of abstracts, 14-01-2013 - 15-01-2013, Namur, Belgium (pp. 25 - 26).

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2012) Characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composite. In: SAMPE Benelux student meeting: book of abstracts, 14-01-2013 - 15-01-2013, Namur, Belgium (pp. 25 - 26).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. In: ESAFORM 2013, 22-04-2013 - 24-04-2013, Aveiro (pp. 1014 - 1021).

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Experimental characterisation of recycled (glass/tpu woven fabric) flake reinforced thermoplastic composites. In: ICCM19; 19th international conference on composite materials, July 28 - August 2, 2013, New York (pp. 3999 - 4010).

Ilin, K. and Warnet, L. and Rietman, A.D. and Akkerman, R. and Thije, R.H.W. ten (2012) Failure Modeling of Thermoplastic Butt-Joint Stiffened Panels by Quasi-Static Loading. In: SIMULIA Community Conference, SCC, 15-05-2012 - 17-05-2012, Providence RI, USA (pp. 63 - 69).

Rietman, A.D. and Niazi, M.S. and Akkerman, R. (2013) FibreChain: characterization and modeling of thermoplastic composites processing. In: CompositesWeek@Leuven and TexComp-11, 19-09-2013 - 20-09-2013, Leuven, Belgie.

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Huetink, J. (2012) Free surface modeling of contacting solid metal flows employing the ALE formulation. In: ESAFORM 2012, 14-03-2012 - 16-03-2012, Erlangen (pp. 431 - 436).

Jansma, S.H. and Rietman, A.D. and Warnet, L. and Akkerman, R. (2013) Influence of moisture content on impact properties of flax fibre reinforced polymers. In: CompositesWeek@Leuven and TexComp-11, 19-09-2013 - 20-09-2013, Leuven, Belgium.

Wolthuizen, D.J. and Thije, R.H.W. ten and Akkerman, R. (2013) Intra-Ply Shear Locking in Finite Element Simulations. In: 11th SAMPE Benelux student meeting, 2013-01-14 - 2013-01-15, Namur, Belgium (pp. 18 - 19).

Demcenko, A. and Ravanan, M. and Visser, H.A. and Loendersloot, R. and Akkerman, R. (2013) Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurements. In: 2012 IEEE international ultrasonics symposium (IUS), Dresden, 7-10 October 2012, 07-10-2012 - 10-10-2012, Dresden (pp. 1909 - 1912).

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Investigation of process induced residual stresses and deformations for industrially pultruded parts having UD and CFM layers. In: 12th World Pultrusion Conference, 6-7 March 2014, Lissabon, Portugal, 06-03-2014 - 07-03-2014, Lissabon.

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Investigation of the Spring-In of a Pultruded L-Shaped Profile for Various Processing Conditions and Thicknesses. In: ESAFORM 2014, 07-05-2014 - 09-05-2014, Espoo, Finland (pp. 273 - 279).

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Boer, A. de (2013) Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure. In: 9th International Workshop on Structural Health Monitoring, IWSHM 2013: A roadmap to intelligent structures, 10-12 September 2013, Lancaster, PA, USA (pp. 445 - 453).

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Numerical process simulations for industrially pultruded profiles. In: 22nd Annual International Conference on Composites/Nano Engineering (ICCE-22), Saint Julian's, Malta, July 13-19, 2014, 13-07-2014 - 19-07-2014, Saint Julian's, Malta.

Scorticati, D. and Illiberi, A. and Römer, G.R.B.E. and Bor, T.C. and Ogieglo, W. and Klein Gunnewiek, M. and Lenferink, A. and Otto, C. and Skolski, J.Z.P. and Grob, F. and Lange, D.F. de and Huis in 't Veld, A.J. (2013) Optical and electrical properties of SnO2 thin films after ultra-short pulsed laser annealing. In: Laser Materials Processing for Solar Energy Devices II, 88260I, 25-08-2013 - 29-08-2013, San Diego, CA, USA (pp. 1 - 12).

Palacios-Aguilera, N.B. and Visser, H.A. and Vargas-Llona, L.D. and Balda-Irurzun, U. and Sridhar, A. and Akkerman, R. and Bossche, A. (2012) Performance of inkjet-printed structures on different substrate materials under high humidity and elevated temperature conditions. In: 4th Electronic System-Integration Technology Conference (ESTC), 2012-09-17 - 2012-09-20, Amsterdam.

Rietman, A.D. and Akkerman, R. (2013) Pull-off strength assessment of co-consolidated AS4/PEEK T-joints. In: SETEC 2013, 11-09-2013 - 12-09-2013, Wuppertal, Germany.

Haanappel, S.P. and Sachs, U. and Thije, R.H.W. ten and Rietman, A.D. and Akkerman, R. (2012) Shear Characterisation of UD Thermoplastic Composites. In: 11th International Conference on Flow Processing in Composite Materials (FPCM-11), Auckland, New Zealand.

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) The Effect of Mandrel Configuration on the Warpage in Pultrusion of Rectangular Hollow Profiles. In: ESAFORM 2014, Espoo, Finland (pp. 250 - 256).

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Thermo-mechanical process modelling of industrially pultruded parts having UD and CFM layers. In: ECCM 2014, 22-06-2014 - 26-06-2014, Seville.

Cornelissen, B. and Rietman, A.D. and Rooij, M.B. de and Akkerman, R. (2012) Tow Mechanics: a contact mechanics approach of friction in fibrous tows during forming. In: ESAFORM 2012, 14-03-2012 - 16-03-2012, Erlangen, Germany.

Akkerman, R. and Rietman, A.D. and Haanappel, S.P. and Sachs, U. (2012) Towards Design for Thermoplastic Composites Manufacturing Using Process Simulation. In: ITHEC 2012, International Conference and Exhibition on Thermoplastic Composites, 29-10-2012 - 30-10-2012, Bremen, Germany.

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2012) Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors. In: Sixth European Workshop on Structural Health Monitoring, 03-07-2012 - 06-07-2012, Germany (pp. 232 - 239).

Ooijevaar, T.H. and Loendersloot, R. and Rogge, M.D. and Akkerman, R. and Tinga, T. (2014) Vibro-Acoustic modulation based damage identification in a composite skin-stiffener structure. In: European Workshop on Structural Health Monitoring, 08-07-2014 - 11-07-2014, Nantes (F) (pp. 544 - 551).

This list was generated on Sun Mar 29 06:17:11 2015 CEST.