Research Group: Produktietechniek / Production Technology (PT)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2016 | 2015 | 2014 | 2013 | 2012
Number of items: 61.

2016

Demcenko, A. and Visser, H.A. and Akkerman, R. (2016) Ultrasonic measurements of undamaged concrete layer thickness in a deteriorated concrete structure. NDT & E international, 77 . 63 - 72. ISSN 0963-8695

2015

Abdul Rasheed, M.I. and Rietman, Bert and Visser, H.A. and Akkerman, Remko (2015) A parametric study on compression molding of reference parts with integrated features using carbon composite production waste. In: 18th International ESAFORM conference on material forming, Graz, 15-17 April 2015, 15-04-2015 - 17-04-2015, Graz (pp. 458 - 463).

Agnelli, S. and Baldi, F. and Blackman, B.R.K. and Castellani, L. and Frontini, P.M. and Laiarinandrasana, L. and Pegoretti, A. and Rink, M. and Salazar, A. and Visser, H.A. (2015) Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise. Polymer testing, 44 . 72 - 81. ISSN 0142-9418

Qin, J. and Wu, Y. and Liao, G. and Zhou, C. and Nijhuis, A. and Liu, S. (2015) Cable Rotation and Twist Pitch Variation for ITER TF Conductor in China. IEEE transactions on applied superconductivity, 25 (3). p. 8800204. ISSN 1051-8223

Carlone, Pierpaolo and Baran, Ismet and Akkerman, Remko and Palazzo, Gaetano S. (2015) Computational analysis of the interaction between impregnation, forming and curing in pultrusion. In: Aldo Ofenheimer & Cecilia Poletti & Daniela Schalk-Kitting & Christof Sommitsch (Eds.), Material Forming ESAFORM 2015. Key engineering materials (651-653). Trans Tech Publications, 889 - 894. ISBN 9783038354710

Camp, W. van de and Dhalle, M.M.J. and Wessel, W.A.J. and Warnet, L. and Atli-Veltin, B. and Putten, S. van der and Dam, J.A.M. and Brake, H.J.M. ter (2015) Cryogenic fatigue and stress-strain behavior of a fibre metal laminate. Physics procedia, 67 . 1043 - 1049. ISSN 1875-3892

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2015) Investigation of process induced warpage for pultrusion of a rectangular hollow profile. Composites. Part B : Engineering, 68 . 365 - 374. ISSN 1359-8368

Baran, Ismet and Jakobsen, Johnny and Andreasen, Jens H. and Akkerman, Remko (2015) Investigation of the Residual Stress State in an Epoxy Based Specimen. In: Aldo Ofenheimer & Cecilia Poletti & Daniela Schalk-Kitting & Christof Sommitsch (Eds.), Material Forming ESAFORM 2015. Key engineering materials (651-653). Trans Tech Publications, 375 - 380. ISBN 9783038354710

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko and Tutum, Cem C. (2015) Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches. Applied composite materials, 22 (1). 99 - 118. ISSN 0929-189X

Baran, Ismet and Warnet, Laurent and Akkerman, Remko (2015) On the mechanical behaviour of a butt jointed thermoplastic composite under bending. In: 20th International Conference on Composite Materials, ICCM20, 19-07-2015 - 24-07-2015, Copenhagen.

Baran, Ismet and Tutum, Cem C. and Hattel, Jesper H. and Akkerman, Remko (2015) Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulation. International journal of material forming, 8 (3). 379 - 389. ISSN 1960-6206

Baran, Ismet and Hattel, Jesper H. and Tutum, Cem C. and Akkerman, Remko (2015) Pultrusion of a vertical axis wind turbine blade part-II: combining the manufacturing process simulation with a subsequent loading scenario. International journal of material forming, 8 (3). 367 - 378. ISSN 1960-6206

Kotanjac, Z. and Lefferts, L. and Koissin, V. and Warnet, L. and Akkerman, R. (2015) Synthesis of Carbon Nanofibers on Large Woven Cloth. C : Journal of carbon research, 1 (1). 2 - 15. ISSN 2311-5629

2014

Scorticati, D. and Illiberi, A. and Bor, T.C. and Eijt, S.W.H. and Schut, H. and Römer, G.R.B.E. and Lange, D.F. de and Huis in 't Veld, A.J. (2014) Annealing of SnO2 thin films by ultra-short laser pulses. Optics express, 22 (S3). A607 - A621. ISSN 1094-4087

Sachs, U. and Akkerman, R. and Fetfatsidis, K. and Vidal-Sallé, E. and Schumacher, J. and Ziegmann, G. and Allaoui, S. and Hivet, G. and Maron, B. and Vanclooster, K. and Lomov, S.V. (2014) Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results. Composites. Part A : Applied science and manufacturing, 67 . 289 - 298. ISSN 1359-835X

Ravenhorst, J.H. van and Akkerman, R. (2014) Circular braiding take-up speed generation using inverse kinematics. Composites. Part A : Applied science and manufacturing, 64 . 147 - 158. ISSN 1359-835X

Cornelissen, B. and Sachs, U. and Rietman, A.D. and Akkerman, R. (2014) Dry friction characterisation of carbon fibre tow and satin weave fabric for composite applications. Composites. Part A : Applied science and manufacturing, 56 . 127 - 135. ISSN 1359-835X

Haanappel, S.P. and Thije, R.H.W. ten and Sachs, U. and Rietman, A.D. and Akkerman, R. (2014) Formability analyses of uni-directional and textile reinforced thermoplastics. Composites. Part A : Applied science and manufacturing, 56 . 80 - 92. ISSN 1359-835X

Cornelissen, Bo and Rooij, Matthijn B. de and Rietman, Bert and Akkerman, Remko (2014) Frictional behavior of carbon fiber tows: a contact mechanics model of tow–tow friction. Textile research journal, 84 (14). 1476 - 1488. ISSN 0040-5175

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Investigation of process induced residual stresses and deformations for industrially pultruded parts having UD and CFM layers. In: 12th World Pultrusion Conference, 6-7 March 2014, Lissabon, Portugal, 06-03-2014 - 07-03-2014, Lissabon.

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Investigation of the Spring-In of a Pultruded L-Shaped Profile for Various Processing Conditions and Thicknesses. In: ESAFORM 2014, 07-05-2014 - 09-05-2014, Espoo, Finland (pp. 273 - 279).

Baran, Ismet and Akkerman, Remko and Hattel, Jesper H. (2014) Material characterization of a polyester resin system for the pultrusion process. Composites. Part B : Engineering, 64 . 194 - 201. ISSN 1359-8368

Baran, Ismet and Akkerman, Remko and Hattel, Jesper H. (2014) Modelling the pultrusion process of an industrial L-shaped composite profile. Composite structures, 118 (1). 37 - 48. ISSN 0263-8223

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Numerical process simulations for industrially pultruded profiles. In: 22nd Annual International Conference on Composites/Nano Engineering (ICCE-22), Saint Julian's, Malta, July 13-19, 2014, 13-07-2014 - 19-07-2014, Saint Julian's, Malta.

Baran, Ismet and Tutum, Cem C. and Hattel, Jesper H. (2014) Probabilistic analysis of a thermosetting pultrusion process. Science and engineering of composite materials . ISSN 0792-1233

Zwaag, S. van der and Grande, A.M. and Post, W. and Garcia, S.J. and Bor, T.C. (2014) Review of current strategies to induce self-healing behaviour in fibre reinforced polymer based composites. Materials science and technology, 30 (13). 1633 - 1641. ISSN 0267-0836

Haanappel, S.P. and Akkerman, R. (2014) Shear characterisation of uni-directional fibre reinforced thermoplastic melts by means of torsion. Composites. Part A : Applied science and manufacturing, 56 . 8 - 26. ISSN 1359-835X

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) The Effect of Mandrel Configuration on the Warpage in Pultrusion of Rectangular Hollow Profiles. In: ESAFORM 2014, Espoo, Finland (pp. 250 - 256).

Baran, Ismet and Carlone, Pierpaolo and Hattel, Jesper H. and Palazzo, Gaetano S. and Akkerman, Remko (2014) The Effect of Product Size on the Pulling Force in Pultrusion. Key engineering materials, 611-612 . 1763 - 1770. ISSN 1013-9826

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Thermo-mechanical process modelling of industrially pultruded parts having UD and CFM layers. In: ECCM 2014, 22-06-2014 - 26-06-2014, Seville.

2013

Ravenhorst, J.H. van and Rietman, A.D. and Akkerman, R. (2013) Braiding take-up speed optimization - case studies. In: 19th international conference on composite materials, ICCM19, Montreal, July 28 - August 2, 2013, 28-07-2013 - 02-08-2013, Montreal, Canada.

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Characterisation of Recycled (Glas/TPU woven fabric) Flake Reinforced Thermoplastic Composite. In: SAMPE Benelux student meeting: book of abstracts, 14-01-2013 - 15-01-2013, Namur, Belgium (pp. 25 - 26).

Visser, H.A. and Caimmi, F. and Pavan, A. (2013) Characterising the fracture toughness of polymers at moderately high rates of loading with the use of instrumented tensile impact testing. Engineering fracture mechanics, 101 . 67 - 79. ISSN 0013-7944

Fernandez Rivas, D. and Betjes, J. and Verhaagen, B. and Bouwhuis, W. and Bor, T.C. and Lohse, D. and Gardeniers, J.G.E. (2013) Erosion evolution in mono-crystalline silicon surfaces caused by acoustic cavitation bubbles. Journal of applied physics, 113 (6). 1 - 13. ISSN 0021-8979

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Experimental characterisation of recycled (glass/tpu woven fabric) flake reinforced thermoplastic composites. In: ICCM19; 19th international conference on composite materials, July 28 - August 2, 2013, New York (pp. 3999 - 4010).

Rietman, A.D. and Niazi, M.S. and Akkerman, R. (2013) FibreChain: characterization and modeling of thermoplastic composites processing. In: CompositesWeek@Leuven and TexComp-11, 19-09-2013 - 20-09-2013, Leuven, Belgie.

Sachs, U. and Haanappel, S.P. and Rietman, A.D. and Thije, R.H.W. ten and Akkerman, R. (2013) Formability of fiber-reinforced thermoplastics in hot press forming process based on friction properties. Key engineering materials, 554-557 . 501 - 506. ISSN 1013-9826

Cornelissen, B. and Rietman, A.D. and Akkerman, R. (2013) Frictional behaviour of high performance fibrous tows: Friction experiments. Composites. Part A : Applied science and manufacturing, 44 . 95 - 104. ISSN 1359-835X

Cornelissen, B. and Rooij, M.B. de and Rietman, A.D. and Akkerman, R. (2013) Frictional behaviour of high performance fibrouws tows: A contact mechanics model of tow -metal friction. Wear, 305 (1-2). 78 - 88. ISSN 0043-1648

Jansma, S.H. and Rietman, A.D. and Warnet, L. and Akkerman, R. (2013) Influence of moisture content on impact properties of flax fibre reinforced polymers. In: CompositesWeek@Leuven and TexComp-11, 19-09-2013 - 20-09-2013, Leuven, Belgium.

Wolthuizen, D.J. and Thije, R.H.W. ten and Akkerman, R. (2013) Intra-Ply Shear Locking in Finite Element Simulations. In: 11th SAMPE Benelux student meeting, 2013-01-14 - 2013-01-15, Namur, Belgium (pp. 18 - 19).

Ven, E.C. van de and Chairuna, A. and Merle, G.E.L. and Benito, S.P. and Borneman, Z. and Nijmeijer, D.C. (2013) Ionic liquid doped polybenzimidazole membranes for high temperature proton exchange membrane fuel cell applications. Journal of power sources, 222 . 202 - 209. ISSN 0378-7753

Scorticati, D. and Illiberi, A. and Römer, G.R.B.E. and Bor, T.C. and Ogieglo, W. and Klein Gunnewiek, M. and Lenferink, A. and Otto, C. and Skolski, J.Z.P. and Grob, F. and Lange, D.F. de and Huis in 't Veld, A.J. (2013) Optical and electrical properties of SnO2 thin films after ultra-short pulsed laser annealing. In: Laser Materials Processing for Solar Energy Devices II, 88260I, 25-08-2013 - 29-08-2013, San Diego, CA, USA (pp. 1 - 12).

Grouve, W.J.B. and Warnet, L. and Rietman, B. and Visser, H.A. and Akkerman, R. (2013) Optimization of the tape placement process parameters for carbon–PPS composites. Composites. Part A : Applied science and manufacturing, 50 . 44 - 53. ISSN 1359-835X

Rietman, A.D. and Akkerman, R. (2013) Pull-off strength assessment of co-consolidated AS4/PEEK T-joints. In: SETEC 2013, 11-09-2013 - 12-09-2013, Wuppertal, Germany.

Palacios-Aguilera, N.B. and Visser, H.A. and Sridhar, A. and Balda-Irurzun, U. and Vargas-Llona, L.D. and Zhou, J. and Akkerman, R. and French, P.J. and Bossche, A. (2013) Reliable inkjet-printed interconnections on foil-type li-ion batteries. IEEE transactions on device and materials reliability, 13 (1). 136 - 145. ISSN 1530-4388

Wolthuizen, D.J. and Thije, R.H.W. ten and Akkerman, R. (2013) Simple tests as critical indicator of intra-ply shear locking. Key engineering materials, 554-557 . 512 - 520. ISSN 1013-9826

2012

Luiten-Olieman, M.W.J. and Winnubst, A.J.A. and Bor, T.C. and Wessling, M. and Nijmeijer, A. and Benes, N.E. (2012) A Generic Method for Inorganic Porous Hollow Fibers Preparation with Shrinkage-controlled Small Radial Dimensions. Procedia engineering, 44 . 644 - 645. ISSN 1877-7058

Petcu, I. and Agrawal, P.B. and Curteza, A. and Visser, H.A. and Brinks, G. and Teodorescu, M. (2012) A comparative study of heating elements used for the development of textile heaters. In: 12th AUTEX World Textile Conference, 13-06-2012 - 15-06-2012, Zadar, Croatia.

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2012) Characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composite. In: SAMPE Benelux student meeting: book of abstracts, 14-01-2013 - 15-01-2013, Namur, Belgium (pp. 25 - 26).

Ilin, K. and Warnet, L. and Rietman, A.D. and Akkerman, R. and Thije, R.H.W. ten (2012) Failure Modeling of Thermoplastic Butt-Joint Stiffened Panels by Quasi-Static Loading. In: SIMULIA Community Conference, SCC, 15-05-2012 - 17-05-2012, Providence RI, USA (pp. 63 - 69).

Haanappel, S.P. and Sachs, U. and Thije, R.H.W. ten and Rietman, A.D. and Akkerman, R. (2012) Forming of Thermoplastic Composites. Key engineering materials, 504-506 . 237 - 242. ISSN 1013-9826

Rietman, A.D. and Haanappel, S.P. and Thije, R.H.W. ten and Akkerman, R. (2012) Forming simulation sensitivity study of the double-dome benchmark geometry. Key engineering materials, 504-506 . 301 - 306. ISSN 1013-9826

Dewo, P. and Houwen, E.B. van der and Sharma, P.K. and Magetsari, R. and Bor, T.C. and Vargas-Llona, L.D. and Horn, J.R. van and Busscher, H.J. and Verkerke, G.J. (2012) Mechanical properties of Indonesian-made narrow dynamic compression plate. Journal of the mechanical behavior of biomedical materials, 13 . 93 - 101. ISSN 1751-6161

Grouve, W.J.B. and Warnet, L. and Rietman, A.D. and Akkerman, R. (2012) On the weld strength of in situ tape placed reinforcements on weave reinforced structures. Composites. Part A : Applied science and manufacturing, 43 (9). 1530 - 1536. ISSN 1359-835X

Palacios-Aguilera, N.B. and Visser, H.A. and Vargas-Llona, L.D. and Balda-Irurzun, U. and Sridhar, A. and Akkerman, R. and Bossche, A. (2012) Performance of inkjet-printed structures on different substrate materials under high humidity and elevated temperature conditions. In: 4th Electronic System-Integration Technology Conference (ESTC), 2012-09-17 - 2012-09-20, Amsterdam.

Haanappel, S.P. and Sachs, U. and Thije, R.H.W. ten and Rietman, A.D. and Akkerman, R. (2012) Shear Characterisation of UD Thermoplastic Composites. In: 11th International Conference on Flow Processing in Composite Materials (FPCM-11), 9-12 July 2012, Auckland, New Zealand.

Cornelissen, B. and Rietman, A.D. and Rooij, M.B. de and Akkerman, R. (2012) Tow Mechanics: a contact mechanics approach of friction in fibrous tows during forming. In: ESAFORM 2012, 14-03-2012 - 16-03-2012, Erlangen, Germany.

Cornelissen, B. and Rietman, A.D. and Rooij, M.B. de and Akkerman, R. (2012) Tow mechanics: a contact mechanics approach of friction in fibrous tows during forming. Key engineering materials, 504-506 . 325 - 330. ISSN 1013-9826

Akkerman, R. and Rietman, A.D. and Haanappel, S.P. and Sachs, U. (2012) Towards Design for Thermoplastic Composites Manufacturing Using Process Simulation. In: ITHEC 2012, International Conference and Exhibition on Thermoplastic Composites, 29-10-2012 - 30-10-2012, Bremen, Germany.

Luiten-Olieman, M.W.J. and Raaijmakers, M.J.T. and Winnubst, A.J.A. and Bor, T.C. and Wessling, M. and Nijmeijer, A. and Benes, N.E. (2012) Towards a generic method for inorganic porous hollow fibers preparation with shrinkage-controlled small radial dimensions, applied to Al2O3, Ni, SiC, stainless steel, and YSZ. Journal of membrane science, 407-408 . 155 - 163. ISSN 0376-7388

This list was generated on Sun Feb 7 07:09:47 2016 CET.