Research Group: Production Technology (PT)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997
Number of items: 246.

2017

Baran, Ismet (2017) Analysis of pultrusion process for thick glass/polyester composites: transverse shear stress formations. Advanced manufacturing: polymer & composites, 2 (3-4). 124 - 132. ISSN 2055-0340

2016

Ya, Wei and Pathiraj, B. and Liu, Shaojie (2016) 2D modelling of clad geometry and resulting thermal cycles during laser cladding. Journal of materials processing technology, 230 . 217 - 232. ISSN 0924-0136

Baran, Ismet and Cinar, Kenan and Ersoy, Nuri and Akkerman, Remko and Hattel, Jesper H. (2016) A Review on the Mechanical Modeling of Composite Manufacturing Processes. Archives of computational methods in engineering . ISSN 1134-3060

Ravenhorst, J.H. van and Akkerman, R. (2016) A yarn interaction model for circular braiding. Composites. Part A : Applied science and manufacturing, 81 . 254 - 263. ISSN 1359-835X

Koissin, Vitaly and Bor, Ton and Kotanjac, Zeljko and Lefferts, Leon and Warnet, Laurent and Akkerman, Remko (2016) Carbon Nanofibers Grown on Large Woven Cloths: Morphology and Properties of Growth. C : Journal of carbon research, 2 (3). 19 -. ISSN 2311-5629

Su, Yibo and Rooij, Matthijn de and Grouve, Wouter and Warnet, Laurent (2016) Characterisation of metal–thermoplastic composite hybrid joints by means of a mandrel peel test. Composites. Part B : Engineering, 95 . 293 - 300. ISSN 1359-8368

Abdul Rasheed, Mohammed Iqbal (2016) Compression molding of chopped woven thermoplastic composite flakes. thesis.

Hernadez Delgadillo, Hector and Loendersloot, Richard and Akkerman, Remko and Yntema, Doekle (2016) Development of an inline water mains inspection technology: Detection of acidic deterioration in cement-based water pipes with ultrasonic pulse-echo technique. In: 2016 IEEE International Ultrasonics Symposium (IUS), 18-09-2016 - 21-09-2016, Tours, France.

Liu, Shaojie (2016) Friction surface cladding of AA1050 onto AA2024: parameter study and process window development. thesis.

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Tinga, T. (2016) Impact Damage Identification in Composite Skin-Stiffener Structures Based on Modal Curvatures. Structural control & health monitoring, 23 (2). 198 - 217. ISSN 1545-2255

Slange, T.K. and Warnet, L. and Grouve, W.J.B. and Akkerman, R. (2016) Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites. In: ESAFORM 2016, 27-04-2016 - 29-04-2016, Nantes, France (pp. 170022 -).

Zhao, J. and Jiang, M. and Soga, K. and Luding, S. (2016) Micro origins for macro behavior in granular media. Granular matter, 18 (59). 1 - 5. ISSN 1434-5021

Baran, I. and Akkerman, R. and Reichardt, J.M. (2016) Optical process model for laser-assisted tape winding. In: ECCM17, 17th European Conference on Composite Materials, 26-06-2016 - 30-06-2016, Munich, Germany.

Liu, S. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2016) Parameter Study for Friction Surface Cladding of AA1050 on AA2024-T351. In: 11th International Symposium on Friction Stir Welding, 17-05-2016 - 19-05-2016, Cambridge, UK.

Przeradzka, M. and Bochove, J.B. van and Bor, T.C. and Grijpma, D.W. (2016) Phase-separated mixed-macromer hydrogel networks and scaffolds prepared by stereolithography. Polymers for advanced technologies . ISSN 1042-7147

Baran, Ismet and Tutum, Cem C. and Hattel, Jesper H. (2016) Probabilistic analysis of a thermosetting pultrusion process. Science and engineering of composite materials, 23 (1). 67 - 76. ISSN 0792-1233

Baran, Ismet and Akkerman, Remko (2016) Process induced transverse shear stresses in thick unidirectional pultruded profiles. In: ECCM17, 17th European Conference on Composite Materials, 26-06-2016 - 30-06-2016, Munich, Germany.

Donderwinkel, T.G. and Rietman, B. and Haanappel, S.P. and Akkerman, R. (2016) Stamp forming optimization for formability and crystallinity. AIP conference proceedings, 1769 (1). 170029 -. ISSN 0094-243X

Demcenko, A. and Visser, H.A. and Akkerman, R. (2016) Ultrasonic measurements of undamaged concrete layer thickness in a deteriorated concrete structure. NDT & E international, 77 . 63 - 72. ISSN 0963-8695

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Tinga, T. (2016) Vibro-acoustic modulation–based damage identification in a composite skin–stiffener structure. Structural health monitoring, 15 (4). 458 - 472. ISSN 1475-9217

Sacchetti, F. and Grouve, W.J.B. and Warnet, L. and Villegas, I. Fernandez (2016) Woven fabric composites: Can we peel it? Procedia structural integrity, 2 . 245 - 252. ISSN 2452-3216

2015

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2015) A parametric study on compression molding of reference parts with integrated features using carbon composite production waste. In: ESAFORM 2015, 15-04-2015 - 17-04-2015, Graz, (pp. 458 - 463).

Ramakrishna, S.N. and Cirelli, M. and Kooij, E.S. and Gunnewiek, M.K. and Benetti, E.M. (2015) Amplified responsiveness of multi-layered, polymer grafts: Synergy between brushes and hydrogels. Macromolecules, 48 (19). 7106 - 7116. ISSN 0024-9297

Agnelli, S. and Baldi, F. and Blackman, B.R.K. and Castellani, L. and Frontini, P.M. and Laiarinandrasana, L. and Pegoretti, A. and Rink, M. and Salazar, A. and Visser, H.A. (2015) Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise. Polymer testing, 44 . 72 - 81. ISSN 0142-9418

Carlone, Pierpaolo and Baran, I. and Akkerman, R. and Palazzo, Gaetano S. (2015) Computational analysis of the interaction between impregnation, forming and curing in pultrusion. Key engineering materials, 651-653 (651-653). 889 - 894. ISSN 1013-9826

Tutum, Cem C. and Deb, Kalyanmoy and Baran, I. (2015) Constrained Efficient Global Optimization for Pultrusion Process. Materials and manufacturing processes, 30 (4). 538 - 551. ISSN 1042-6914

Camp, W. van de and Dhallé, M.M.J. and Wessel, W.A.J. and Warnet, L. and Atli-Veltin, B. and Putten, S. van der and Dam, J.A.M. and Brake, H.J.M. ter (2015) Cryogenic fatigue and stress-strain behavior of a fibre metal laminate. Physics procedia, 67 . 1043 - 1049. ISSN 1875-3892

Geijselaers, H.J.M. and Bor, T.C. and Hilkhuijsen, P. and Boogaard, A.H. van den (2015) Cyclic shear behavior of austenitic stainless steel sheet. Computer methods in materials science = Informatyka w Technologii Materialow, 15 (1). 9 - 18. ISSN 1641-8581

Liu, S. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2015) Friction Surface Cladding of AA1050 on AA2024-T351; influence of clad layer thickness and tool rotation rate. In: FSWP'2015, 01-10-2015 - 02-10-2015, San Sebastian, Spain.

Liu, S. and Bor, T.C. and Stelt, A.A. van der and Geijselaers, H.J.M. and Kwakernaak, C. and Kooijman, A.M. and Mol, J.M.C. and Akkerman, R. and Boogaard, A.H. van den (2015) Friction surface cladding: An exploratory study of a new solid state cladding process. Journal of materials processing technology, 229 . 769 - 784. ISSN 0924-0136

Baran, I. and Hattel, Jesper H. and Akkerman, R. (2015) Investigation of process induced warpage for pultrusion of a rectangular hollow profile. Composites. Part B : Engineering, 68 . 365 - 374. ISSN 1359-8368

Baran, I. and Jakobsen, Johnny and Andreasen, Jens H. and Akkerman, R. (2015) Investigation of the Residual Stress State in an Epoxy Based Specimen. Key engineering materials, 651-653 (651-653). 375 - 380. ISSN 1013-9826

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Boogaard, A.H. van den (2015) Large strain cyclic behavior of metastable austenic stainless steel. Materials science & engineering A, 631 . 166 - 172. ISSN 0921-5093

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko and Tutum, Cem C. (2015) Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches. Applied composite materials, 22 (1). 99 - 118. ISSN 0929-189X

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Tinga, T. (2015) Nonlinear Dynamic Behavior of an Impact Damaged Composite Skin-Stiffener Structure. Journal of sound and vibration, 353 . 243 - 258. ISSN 0022-460X

Nasiriboroumand, M. and Montazer, M. and Simon, F. and Liesiene, J. and Šaponjic, Z. (2015) Novel method for synthesis of silver nanoparticles and their application on wool. Applied surface science, 346 . 477 - 483. ISSN 0169-4332

Baran, I. and Warnet, L. and Akkerman, R. (2015) On the mechanical behaviour of a butt jointed thermoplastic composite under bending. In: 20th International Conference on Composite Materials, ICCM20, 19-07-2015 - 24-07-2015, Copenhagen.

Baran, Ismet and Tutum, Cem C. and Hattel, Jesper H. and Akkerman, Remko (2015) Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulation. International journal of material forming, 8 (3). 379 - 389. ISSN 1960-6206

Baran, Ismet and Hattel, Jesper H. and Tutum, Cem C. and Akkerman, Remko (2015) Pultrusion of a vertical axis wind turbine blade part-II: combining the manufacturing process simulation with a subsequent loading scenario. International journal of material forming, 8 (3). 367 - 378. ISSN 1960-6206

Baran, I. (2015) Pultrusion processes for composite manufacture. In: Philippe Boisse (Ed.), Advances in Composites Manufacturing and Process Design. Woodhead publishing series in composites science and engineering (56). Woodhead, 379 - 414. ISBN 9781782423072

Baran, Ismet (2015) Pultrusion: state-of-the-art process models. Smithers Rapra, Shropshire. ISBN 9781910242421

Kotanjac, Z. and Lefferts, L. and Koissin, V. and Warnet, L. and Akkerman, R. (2015) Synthesis of Carbon Nanofibers on Large Woven Cloth. C : Journal of carbon research, 1 (1). 2 - 15. ISSN 2311-5629

Liu, S. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2015) Thermal and Flow Analysis of Friction Surface Cladding with Varying Clad Layer Thickness. In: IDDRG 2015, 31-05-2015 - 03-06-2015, Shanghai.

Drenth, Emiel (2015) Towards condition based asset management of uPVC pipes. thesis.

2014

Scorticati, D. and Illiberi, A. and Bor, T.C. and Eijt, S.W.H. and Schut, H. and Römer, G.R.B.E. and Lange, D.F. de and Huis in 't Veld, A.J. (2014) Annealing of SnO2 thin films by ultra-short laser pulses. Optics express, 22 (S3). A607 - A621. ISSN 1094-4087

Sachs, U. and Akkerman, R. and Fetfatsidis, K. and Vidal-Sallé, E. and Schumacher, J. and Ziegmann, G. and Allaoui, S. and Hivet, G. and Maron, B. and Vanclooster, K. and Lomov, S.V. (2014) Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results. Composites. Part A : Applied science and manufacturing, 67 . 289 - 298. ISSN 1359-835X

Ravenhorst, J.H. van and Akkerman, R. (2014) Circular braiding take-up speed generation using inverse kinematics. Composites. Part A : Applied science and manufacturing, 64 . 147 - 158. ISSN 1359-835X

Cornelissen, B. and Sachs, U. and Rietman, A.D. and Akkerman, R. (2014) Dry friction characterisation of carbon fibre tow and satin weave fabric for composite applications. Composites. Part A : Applied science and manufacturing, 56 . 127 - 135. ISSN 1359-835X

Haanappel, S.P. and Thije, R.H.W. ten and Sachs, U. and Rietman, A.D. and Akkerman, R. (2014) Formability analyses of uni-directional and textile reinforced thermoplastics. Composites. Part A : Applied science and manufacturing, 56 . 80 - 92. ISSN 1359-835X

Cornelissen, Bo and Rooij, Matthijn B. de and Rietman, Bert and Akkerman, Remko (2014) Frictional behavior of carbon fiber tows: a contact mechanics model of tow–tow friction. Textile research journal, 84 (14). 1476 - 1488. ISSN 0040-5175

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Investigation of process induced residual stresses and deformations for industrially pultruded parts having UD and CFM layers. In: 12th World Pultrusion Conference, 6-7 March 2014, Lissabon, Portugal, 06-03-2014 - 07-03-2014, Lissabon.

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Investigation of the Spring-In of a Pultruded L-Shaped Profile for Various Processing Conditions and Thicknesses. In: ESAFORM 2014, 07-05-2014 - 09-05-2014, Espoo, Finland (pp. 273 - 279).

Koissin, V. and Demcenko, A. and Korneev, V.A. (2014) Isothermal epoxy-cure monitoring using nonlinear ultrasonics. International journal of adhesion and adhesives, 52 . 11 - 18. ISSN 0143-7496

Baran, Ismet and Akkerman, Remko and Hattel, Jesper H. (2014) Material characterization of a polyester resin system for the pultrusion process. Composites. Part B : Engineering, 64 . 194 - 201. ISSN 1359-8368

Baran, Ismet and Akkerman, Remko and Hattel, Jesper H. (2014) Modelling the pultrusion process of an industrial L-shaped composite profile. Composite structures, 118 (1). 37 - 48. ISSN 0263-8223

Baran, Ismet (2014) Modelling the pultrusion process of off shore wind turbine blades. thesis.

Demcenko, A. and Koissin, V. and Korneev, V.A. (2014) Noncollinear wave mixing for measurement of dynamic processes in polymers: Physical ageing in thermoplastics and epoxy cure. Ultrasonics, 54 (2). 684 - 693. ISSN 0041-624X

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Numerical process simulations for industrially pultruded profiles. In: 22nd Annual International Conference on Composites/Nano Engineering (ICCE-22), Saint Julian's, Malta, July 13-19, 2014, 13-07-2014 - 19-07-2014, Saint Julian's, Malta.

Zwaag, S. van der and Grande, A.M. and Post, W. and Garcia, S.J. and Bor, T.C. (2014) Review of current strategies to induce self-healing behaviour in fibre reinforced polymer based composites. Materials science and technology, 30 (13). 1633 - 1641. ISSN 0267-0836

Haanappel, S.P. and Akkerman, R. (2014) Shear characterisation of uni-directional fibre reinforced thermoplastic melts by means of torsion. Composites. Part A : Applied science and manufacturing, 56 . 8 - 26. ISSN 1359-835X

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) The Effect of Mandrel Configuration on the Warpage in Pultrusion of Rectangular Hollow Profiles. In: ESAFORM 2014, Espoo, Finland (pp. 250 - 256).

Baran, Ismet and Carlone, Pierpaolo and Hattel, Jesper H. and Palazzo, Gaetano S. and Akkerman, Remko (2014) The Effect of Product Size on the Pulling Force in Pultrusion. Key engineering materials, 611-612 . 1763 - 1770. ISSN 1013-9826

Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko (2014) Thermo-mechanical process modelling of industrially pultruded parts having UD and CFM layers. In: ECCM 2014, 22-06-2014 - 26-06-2014, Seville.

2013

Ravenhorst, J.H. van and Rietman, A.D. and Akkerman, R. (2013) Braiding take-up speed optimization - case studies. In: 19th international conference on composite materials, ICCM19, Montreal, July 28 - August 2, 2013, 28-07-2013 - 02-08-2013, Montreal, Canada.

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Characterisation of Recycled (Glas/TPU woven fabric) Flake Reinforced Thermoplastic Composite. In: SAMPE Benelux student meeting: book of abstracts, 14-01-2013 - 15-01-2013, Namur, Belgium (pp. 25 - 26).

Visser, H.A. and Caimmi, F. and Pavan, A. (2013) Characterising the fracture toughness of polymers at moderately high rates of loading with the use of instrumented tensile impact testing. Engineering fracture mechanics, 101 . 67 - 79. ISSN 0013-7944

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. Key engineering materials, 554-557 . 1014 - 1021. ISSN 1013-9826

Grouve, W.J.B. and Warnet, L. and Akkerman, R. (2013) Critical assessment of the mandrel peel test for fiber reinforced thermoplastic laminates. Engineering fracture mechanics, 101 . 96 - 108. ISSN 0013-7944

Koissin, V. and Warnet, L. and Akkerman, R. (2013) Delamination in carbon-fibre composites improved with in situ. Engineering fracture mechanics, 101 . 140 - 148. ISSN 0013-7944

Paternoster, A.R.A. and Loendersloot, R. and Warnet, L. and Boer, A. de and Akkerman, R. (2013) Engineers in a flap over rotor blades. Flight International . 24 - 24. ISSN 0015-3710

Fernandez Rivas, D. and Betjes, J. and Verhaagen, B. and Bouwhuis, W. and Bor, T.C. and Lohse, D. and Gardeniers, J.G.E. (2013) Erosion evolution in mono-crystalline silicon surfaces caused by acoustic cavitation bubbles. Journal of applied physics, 113 (6). 1 - 13. ISSN 0021-8979

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Experimental characterisation of recycled (glass/tpu woven fabric) flake reinforced thermoplastic composites. In: ICCM19; 19th international conference on composite materials, July 28 - August 2, 2013, New York (pp. 3999 - 4010).

Rietman, A.D. and Niazi, M.S. and Akkerman, R. (2013) FibreChain: characterization and modeling of thermoplastic composites processing. In: CompositesWeek@Leuven and TexComp-11, 19-09-2013 - 20-09-2013, Leuven, Belgie.

Sachs, U. and Haanappel, S.P. and Rietman, A.D. and Thije, R.H.W. ten and Akkerman, R. (2013) Formability of Fiber-reinforced thermoplastics in hot press forming process based on friction properties. In: Esaform 2013, Averio, Portugal.

Sachs, U. and Haanappel, S.P. and Rietman, A.D. and Thije, R.H.W. ten and Akkerman, R. (2013) Formability of fiber-reinforced thermoplastics in hot press forming process based on friction properties. Key engineering materials, 554-557 . 501 - 506. ISSN 1013-9826

Cornelissen, B. and Rietman, A.D. and Akkerman, R. (2013) Frictional behaviour of high performance fibrous tows: Friction experiments. Composites. Part A : Applied science and manufacturing, 44 . 95 - 104. ISSN 1359-835X

Cornelissen, B. and Rooij, M.B. de and Rietman, A.D. and Akkerman, R. (2013) Frictional behaviour of high performance fibrouws tows: A contact mechanics model of tow -metal friction. Wear, 305 (1-2). 78 - 88. ISSN 0043-1648

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2013) Geometrical optimization of a hingeless deployment system for an active rotor blade. Journal of intelligent material systems and structures, 24 (7). 855 - 861. ISSN 1045-389X

Jansma, S.H. and Rietman, A.D. and Warnet, L. and Akkerman, R. (2013) Influence of moisture content on impact properties of flax fibre reinforced polymers. In: CompositesWeek@Leuven and TexComp-11, 19-09-2013 - 20-09-2013, Leuven, Belgium.

Wolthuizen, D.J. and Thije, R.H.W. ten and Akkerman, R. (2013) Intra-Ply Shear Locking in Finite Element Simulations. In: 11th SAMPE Benelux student meeting, 14-01-2013 - 15-01-2013, Namur, Belgium (pp. 18 - 19).

Ven, E.C. van de and Chairuna, A. and Merle, G.E.L. and Benito, S.P. and Borneman, Z. and Nijmeijer, D.C. (2013) Ionic liquid doped polybenzimidazole membranes for high temperature proton exchange membrane fuel cell applications. Journal of power sources, 222 . 202 - 209. ISSN 0378-7753

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2013) Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels. In: The 11th International Conference on Numerical Methods in Forming Processes, NUMIFORM2013, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 175 - 182).

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Boer, A. de (2013) Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure. In: 9th International Workshop on Structural Health Monitoring, IWSHM 2013: A roadmap to intelligent structures, 10-12 September 2013, Lancaster, PA, USA (pp. 445 - 453).

Grouve, W.J.B. and Vanden Poel, G. and Warnet, L. and Akkerman, R. (2013) On crystallisation and fracture toughness of poly(phenylene sulphide) under tape placement conditions. Plastics rubber and composites, 42 (7). 282 - 288. ISSN 1465-8011

Scorticati, D. and Illiberi, A. and Römer, G.R.B.E. and Bor, T.C. and Ogieglo, W. and Klein Gunnewiek, M. and Lenferink, A. and Otto, C. and Skolski, J.Z.P. and Grob, F. and Lange, D.F. de and Huis in 't Veld, A.J. (2013) Optical and electrical properties of SnO2 thin films after ultra-short pulsed laser annealing. In: Laser Materials Processing for Solar Energy Devices II, 88260I, 25-08-2013 - 29-08-2013, San Diego, CA, USA (pp. 1 - 12).

Ravenhorst, J.H. van and Akkerman, R. (2013) Optimisation of the circular braiding process. In: CompositesWeek@Leuven and TexComp-11, 2013-09-16 - 2013-09-20, Leuven.

Grouve, W.J.B. and Warnet, L. and Rietman, B. and Visser, H.A. and Akkerman, R. (2013) Optimization of the tape placement process parameters for carbon–PPS composites. Composites. Part A : Applied science and manufacturing, 50 . 44 - 53. ISSN 1359-835X

Rietman, A.D. and Akkerman, R. (2013) Pull-off strength assessment of co-consolidated AS4/PEEK T-joints. In: SETEC 2013, 11-09-2013 - 12-09-2013, Wuppertal, Germany.

Palacios-Aguilera, N.B. and Visser, H.A. and Sridhar, A. and Balda-Irurzun, U. and Vargas-Llona, L.D. and Zhou, J. and Akkerman, R. and French, P.J. and Bossche, A. (2013) Reliable inkjet-printed interconnections on foil-type li-ion batteries. IEEE transactions on device and materials reliability, 13 (1). 136 - 145. ISSN 1530-4388

2012

Luiten-Olieman, M.W.J. and Winnubst, A.J.A. and Bor, T.C. and Wessling, M. and Nijmeijer, A. and Benes, N.E. (2012) A Generic Method for Inorganic Porous Hollow Fibers Preparation with Shrinkage-controlled Small Radial Dimensions. Procedia engineering, 44 . 644 - 645. ISSN 1877-7058

Petcu, I. and Agrawal, P.B. and Curteza, A. and Visser, H.A. and Brinks, G. and Teodorescu, M. (2012) A comparative study of heating elements used for the development of textile heaters. In: 12th AUTEX World Textile Conference, 13-06-2012 - 15-06-2012, Zadar, Croatia.

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2012) Characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composite. In: SAMPE Benelux student meeting: book of abstracts, 14-01-2013 - 15-01-2013, Namur, Belgium (pp. 25 - 26).

Ilin, K. and Warnet, L. and Rietman, A.D. and Akkerman, R. and Thije, R.H.W. ten (2012) Failure Modeling of Thermoplastic Butt-Joint Stiffened Panels by Quasi-Static Loading. In: SIMULIA Community Conference, SCC, 15-05-2012 - 17-05-2012, Providence RI, USA (pp. 63 - 69).

Haanappel, S.P. and Sachs, U. and Thije, R.H.W. ten and Rietman, A.D. and Akkerman, R. (2012) Forming of Thermoplastic Composites. Key engineering materials, 504-506 . 237 - 242. ISSN 1013-9826

Rietman, A.D. and Haanappel, S.P. and Thije, R.H.W. ten and Akkerman, R. (2012) Forming simulation sensitivity study of the double-dome benchmark geometry. Key engineering materials, 504-506 . 301 - 306. ISSN 1013-9826

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Huetink, J. (2012) Free surface modeling of contacting solid metal flows employing the ALE formulation. In: ESAFORM 2012, 14-03-2012 - 16-03-2012, Erlangen (pp. 431 - 436).

Dewo, P. and Houwen, E.B. van der and Sharma, P.K. and Magetsari, R. and Bor, T.C. and Vargas-Llona, L.D. and Horn, J.R. van and Busscher, H.J. and Verkerke, G.J. (2012) Mechanical properties of Indonesian-made narrow dynamic compression plate. Journal of the mechanical behavior of biomedical materials, 13 . 93 - 101. ISSN 1751-6161

Grouve, W.J.B. and Warnet, L. and Rietman, A.D. and Akkerman, R. (2012) On the weld strength of in situ tape placed reinforcements on weave reinforced structures. Composites. Part A : Applied science and manufacturing, 43 (9). 1530 - 1536. ISSN 1359-835X

Palacios-Aguilera, N.B. and Visser, H.A. and Vargas-Llona, L.D. and Balda-Irurzun, U. and Sridhar, A. and Akkerman, R. and Bossche, A. (2012) Performance of inkjet-printed structures on different substrate materials under high humidity and elevated temperature conditions. In: 4th Electronic System-Integration Technology Conference (ESTC), 2012-09-17 - 2012-09-20, Amsterdam.

Haanappel, S.P. and Sachs, U. and Thije, R.H.W. ten and Rietman, A.D. and Akkerman, R. (2012) Shear Characterisation of UD Thermoplastic Composites. In: 11th International Conference on Flow Processing in Composite Materials (FPCM-11), 9-12 July 2012, Auckland, New Zealand.

Loendersloot, R. and Grouve, W.J.B. and Lamers, E.A.D. and Wijskamp, S. (2012) Textile impregnation with thermoplastic resin - models and application. In: Flow Processes in Composite Materials, 09-07-2012 - 12-07-2012, Auckland, NZ (pp. 344 - 351).

Cornelissen, B. and Rietman, A.D. and Rooij, M.B. de and Akkerman, R. (2012) Tow Mechanics: a contact mechanics approach of friction in fibrous tows during forming. In: ESAFORM 2012, 14-03-2012 - 16-03-2012, Erlangen, Germany.

Cornelissen, B. and Rietman, A.D. and Rooij, M.B. de and Akkerman, R. (2012) Tow mechanics: a contact mechanics approach of friction in fibrous tows during forming. Key engineering materials, 504-506 . 325 - 330. ISSN 1013-9826

Akkerman, R. and Rietman, A.D. and Haanappel, S.P. and Sachs, U. (2012) Towards Design for Thermoplastic Composites Manufacturing Using Process Simulation. In: ITHEC 2012, International Conference and Exhibition on Thermoplastic Composites, 29-10-2012 - 30-10-2012, Bremen, Germany.

Luiten-Olieman, M.W.J. and Raaijmakers, M.J.T. and Winnubst, A.J.A. and Bor, T.C. and Wessling, M. and Nijmeijer, A. and Benes, N.E. (2012) Towards a generic method for inorganic porous hollow fibers preparation with shrinkage-controlled small radial dimensions, applied to Al2O3, Ni, SiC, stainless steel, and YSZ. Journal of membrane science, 407-408 . 155 - 163. ISSN 0376-7388

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2012) Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors. In: Sixth European Workshop on Structural Health Monitoring, 03-07-2012 - 06-07-2012, Germany (pp. 232 - 239).

Grouve, W.J.B. (2012) Weld strength of laser-assisted tape-placed thermoplastic composites. thesis.

2011

Thije, R.H.W. ten and Akkerman, R. and Ubbink, M.P. and Meer, L. van der (2011) A lubrication approach to friction in thermoplastic composites forming processes. Composites. Part A : Applied science and manufacturing, 42 (8). 950 - 960. ISSN 1359-835X

Qin, J. and Wu, Y. and Warnet, L.L. and Nijhuis, A. (2011) A novel numerical mechanical model for the stress–strain distribution in superconducting cable-in-conduit conductors. Superconductor Science and Technology, 24 (6). 065012. ISSN 0953-2048

Ravenhorst, J.H. van and Akkerman, R. (2011) A spool pattern tool for circular braiding. In: 18th International Conference on Composite Materials, ICCM 2011, August 21-26, 2011, Jeju Island, Korea.

Qin, J. and Warnet, L.L. and Wu, Y. and Nijhuis, A. (2011) CORD, A Novel Numerical Mechanical Model for Nb3Sn CICCs. IEEE Transactions on Applied Superconductivity, 21 (3). pp. 2046-2049. ISSN 1051-8223

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Quak, W. and Akkerman, R. and Huetink, J. (2011) Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 1290 - 1295).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Quak, W. and Akkerman, R. and Huetink, J. (2011) Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Rietman, B. and Sachs, U. and Haanappel, S.P. and Akkerman, R. (2011) Complex stamp forming of advanced thermoplastic composites. In: ECCOMAS 2011.

Ooijevaar, T.H. and Grooteman, F.P. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2011) Dynamic characterisation of a damaged composite structure with stiffeners employing fibre bragg gratings. In: 5th International Conference on Composites Testing and Model Simulation, CompTest 2011, February 14-16, 2011, Lausanne, Switzerland.

Visser, H.A. and Balda Irurzun, U. and Akkerman, R. and Sridhar, A. (2011) Fabrication and mechanical characterisation of inkjet printed strain gauges. In: LOPE-C 2011. OE-A, pp. 349-351. ISBN 9783000349577

Sachs, U. and Akkerman, R. and Thije, R. ten and Rooij, M. de (2011) Friction in Forming of UD Composites. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

Sachs, Ulrich and Haanappel, Sebastiaan and Rietman, Bert and Akkerman, Remko (2011) Friction testing of thermoplastic composites. In: SEICO 11 – Paris: SAMPE Europe's 32nd International Technical Conference and Forum, 28-29 March 2011, Paris.

Paternoster, Alexandre and Loendersloot, Richard and Boer, André de and Akkerman, Remko (2011) Geometric Optimisation of Hinge-less Deployment System for an Active Rotorblade. In: ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011, September 18-21, 2011, Scottsdale, AZ, USA.

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2011) Geometric optimisation of a gurney flap henge-less deployment system for a helicopter model blade. In: European Rotorcraft Forum, Milaan, Italy.

Haanappel, S.P. and Thije, R. ten and Sachs, U. and Rietman, A.D. and Akkerman, R. (2011) In-Plane Shear Characterisation of Uni-Directionally Reinforced Thermoplastic Melts. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. pp. 930-935).

Visser, H.A. and Bor, T.C. and Wolters, M. and Warnet, L.L. and Govaert, L.E. (2011) Influence of physical aging on impact embrittlement of uPVC pipes. Plastics, Rubber and Composites, 40 (5). pp. 201-212. ISSN 1465-8011

Balda Irurzun, U. and Akkerman, R. (2011) Mixed continuous-discrete variable optimization of composite panels using surrogate models. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

Rietman, Bert and Haanappel, Sebastiaan and Sachs, Ulrich and Akkerman, Remko (2011) Process simulations for composites forming of UD tape laminate. In: 5th International CFK-Valley Stade Convention, 7-8 June 2011, Stade.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Akkerman, R. and Boer, A. de (2011) Structural Health Monitoring of an Advanced Composite Aircraft Structure Using a Modal Approach. In: 8th International Workshop on Structural Health Monitoring 2011, September 13-15, 2011, Stanford, CA, USA (pp. 1053 - 1062).

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2011) Vibration based structural health monitoring and the modal strain energy damage index algorithm applied to a composite T-beam. In: C.M.A. Vasques & J. Dias Rodrigues (Eds.), Vibration and Structural Acoustics Analysis : Current Research and Related Technologies. Springer Netherlands, pp. 121-150. ISBN 9789400717022

2010

Paternoster, Alexandre and Boer, André de and Loendersloot, Richard and Akkerman, Remko (2010) Actuators for smart applications. In: ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2010-3905, September 28 - October 1, 2010, Philadelphia, Pennsylvania.

Zand, J. van de and Akkerman, R. (2010) Automated Double Cantilever Beam test system – A two-axis moving camera setup controlled by image analysis for crack recognition. In: SAMPE Benelux Student Seminar 2010, January 12-13, 2010, Ermelo, The Netherlands.

Grouve, W.J.B. and Akkerman, R. (2010) Consolidation process model for film stacking glass/PPS laminates. Plastics, Rubber and Composites, 39 (3-5). pp. 208-215. ISSN 1465-8011

Haanappel, S.P. and Thije, R. ten and Akkerman, R. (2010) Constitutive modelling of UD reinforced thermoplastic laminates. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Koissin, V. and Kotanjac, Z. and Lomov, S.V. and Gorbatikh, L. and Warnet, L. and Akkerman, R. (2010) Deformability of a textile reinforcement modified with nanofibres. In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France.

Loendersloot, Richard and Grouve, Wouter J.B. and Akkerman, Remko and Boer, André de (2010) Development of a multigrid finite difference solver for benchmark permeability analysis. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Koissin, V. and Warnet, L. and Akkerman, R. (2010) Experimental characterization of fibre-reinforced composites improved with nanofibres or nanotubes. In: 14th International Conference on Experimental Mechanics, ICEM 2010, July 4-9, 2010, Poitiers, France.

Thije, R.H.W. ten and Akkerman, R. (2010) Finite element simulations of laminated composites forming processes. International Journal of Material Forming, 3 (Suppl.). pp. 715-718. ISSN 1960-6206

Haanappel, S.P. and Thije, R. ten and Akkerman, R. (2010) Forming predictions of UD reinforced thermoplastic laminates. In: 14th European Conference on Composite Materials, ECCM 2010, 7-10 June, 2010, Budapest, Hungary.

Akkerman, R. and Thije, R. ten and Sachs, U. and Rooij, M.B. de (2010) Friction in Textile Thermoplastic Composites Forming. In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France (pp. pp. 271-279).

Cornelissen, B. and Warnet, L. and Akkerman, R. (2010) Friction measurements on carbon fibre tows. In: 14th International Conference on Experimental Mechanics (ICEM 14), July 4-9, 2010, Poitiers, France.

Warnet, L. and Akkerman, R. and Ravensberg, M. (2010) High velocity impact on textile reinforced composites. In: 16th International Conference on Composite Materials, ICCM 2007, 8-13 July 2007, Kyoto, Japan.

Visser, Hendrikus A. and Bor, Ton C. and Wolters, Mannes and Engels, Tom A.P. and Govaert, Leon E. (2010) Lifetime Assessment of Load-Bearing Polymer Glasses: An Analytical Framework for Ductile Failure. Macromolecular Materials and Engineering, 295 (7). pp. 637-651. ISSN 1438-7492

Visser, Hendrikus A. and Bor, Ton C. and Wolters, Mannes and Wismans, Joris G.F. and Govaert, Leon E. (2010) Lifetime Assessment of Load-Bearing Polymer Glasses: The Influence of Physical Ageing. Macromolecular Materials and Engineering, 295 (12). pp. 1066-1081. ISSN 1438-7492

Bor, T.C. and Warnet, L. and Akkerman, R. and Boer, A. de (2010) Modeling of Stress Development During Thermal Damage Healing in Fiber-reinforced Composite Materials Containing Embedded Shape Memory Alloy Wires. Journal of Composite Materials, 44 (22). 2547 - 2572. ISSN 0021-9983

Cornelissen, B. and Akkerman, R. (2010) Tow Mechanics: Improving The Accuracy Of Deformation Modelling. In: SAMPE Benelux Student Seminar 2010, January 12-13, 2010, Ermelo, The Netherlands.

Grouve, W.J.B. and Warnet, L.L. and Akkerman, R. (2010) Towards a process simulation tool for the laseer assisted tape placement process. In: 14th European Conference on Composite Materials, ECCM 2010, June 7-10, 2010, Budapest, Hungary.

Cornelissen, Bo and Akkerman, Remko (2010) Towards modelling of the frictional behaviour of deforming fibrous tows: A
geometrical approach.
In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France.

Ooijevaar, T.H. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2010) Vibration based Structural Health Monitoring of a Composite Plate Structure with Multiple Stiffeners. In: Fifth European Workshop on Structural Health Monitoring, June 28 - July 4, 2010, Sorrento, Naples, Italy.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2010) Vibration based Structural Health Monitoring of a composite T-beam. Composite Structures, 92 (9). pp. 2007-2015. ISSN 0263-8223

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2010) Vibration based structural health monitoring of a composite plate with stiffeners. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium (pp. 909 - 924).

Grouve, W.J.B. and Warnet, L. and Akkerman, R. and Wijskamp, S. and Kok, J.S.M. (2010) Weld Strength Assessment for Tape Placement. International Journal of Material Forming, 3 (Suppl.). pp. 707-710. ISSN 1960-6206

2009

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) A comparative study of two conductive inkjet inks for fabrication of RF circuit structures. In: Large-area, Organic & Printed Electronics Convention, LOPE-C 2009, June 23-25, 2009, Frankfurt, Germany.

Grouve, W.J.B. and Akkerman, R. (2009) A consolidation process model for film stacking glass/PPS laminates. In: 17th International Conference on Composite Materials, ICCM 2009, 27-31 July 2009, Edinburgh, UK.

Thije, R.H.W. ten and Akkerman, R. (2009) A multi-layer triangular membrane finite element for the forming simulation of laminated composites. Composites Part A: Applied Science and Manufacturing, 40 (6-7). pp. 739-753. ISSN 1359-835X

Paternoster, A.R.A. and Boer, A. de and Akkerman, R. (2009) Actuator review for smart rotor blades. [Report]

Visser, H.A. and Warnet, L.L. and Akkerman, R. (2009) An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipes. Engineering Fracture Mechanics, 76 (18). pp. 2698-2710. ISSN 0013-7944

Cornelissen, B. and Akkerman, R. (2009) Analysis of yarn bending behaviour. In: ICCM-17 17th International Conference on Composite Materials, 27 Jul 2009 - 31 Jul 2009, Edinburgh.

Harrison, P. and Thije, René ten and Akkerman, Remko and Long, Andrew C. (2009) Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. In: NATO Advanced Research Workshop: Textile Composites, May 18-22, 2009, Kiev, Ukraine.

Thije, R.H.W. ten and Akkerman, R. (2009) Design of an experimental setup to measure tool-ply and ply-ply friction in thermoplastic laminates. International Journal of Material Forming, 2 (Suppl.). pp. 197-200. ISSN 1960-6206

Sridhar, A. and Perik, M.A. and Reiding, J. and Dijk, D.J. van and Akkerman, R. (2009) Fabrication of RF Circuit Structures on a PCB Material Using Inkjet Printing-Electroless Plating and the Substrate Preparation Therefor. Transactions of The Japan Institute of Electronics Packaging, 2 (1). pp. 116-124. ISSN 1883-3365

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) Inkjet printing and adhesion characterisation of conductive tracks on a commercial printed circuit board material. Thin Solid Films, 517 (16). pp. 4633-4637. ISSN 0040-6090

Sridhar, A. and Reiding, J. and Adelaar, H. and Achterhoek, F. and Dijk, D.J. van and Akkerman, R. (2009) Inkjet-printing- and electroless-plating- based fabrication of RF circuit structures on high-frequency substrates. Journal of Micromechanics and Microengineering, 19 (8). 085020. ISSN 0960-1317

Akkerman, Remko and Thije, René ten (2009) Models for Textile Composites Forming. In: NATO Advanced Research Workshop: Textile Composites, May 18-22, 2009, Kiev, Ukraine.

Grouve, W.J.B. and Akkerman, R. (2009) Multi-scale effects in the consolidation of thermoplastic laminates. International Journal of Material Forming, 2 (Suppl.). pp. 157-160. ISSN 1960-6206

Paternoster, A.R.A. and Boer, A. de and Akkerman, R. (2009) Piezo-Actuators for Gurney flap concept. [Report]

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) Surface Modification of a PCB Substrate for Better Adhesion of Inkjet Printed Circuit Structures. In: 3rd International Student Conference on Print and Media Technology, Printing Future Days 2009, November 2-5, 2009, Chemnitz, Germany (pp. pp. 363-368).

Visser, Roy and Bor, Ton and Wolters, Mannes and Govaert, Leon E. (2009) The influence of physical ageing on yielding and failure of unplasticised poly(vinyl chloride) pipes. In: 14th International Conference on Deformation Yield and Fracture of Polymers, 6-9 April 2009, Rolduc, Kerkrade.

Loendersloot, Richard and Ooijevaar, Ted and Warnet, Laurent and Akkerman, Remko and Boer, André de (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: Integrity Failure and Reliability - 3, 20-24 July 2009, Porto, Portugal.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: 15th International Conference on Composite Structures, ICCS, 15-17 June 2009, Porto, Portugal.

2008

Visser, H.A. and Wolters, M. and Bor, T.C. and Engels, T.A.P. and Govaert, L.E. (2008) A new engineering approach to predict the long-term hydrostatic strength of unplasticized poly(vinyl chloride) pipes. In: 10th International PVC Conference, 22-24 April 2008, Brighton, UK (pp. pp. 377-387).

Grouve, Wouter J.B. and Akkerman, Remko (2008) An idealised BC for the meso scale analysis of textile impregnation. In: 9th International Conference on Flow Processes in Composite Materials, FPCM 2008, 8-10 July 2008, Montreal, Canada.

Cao, J. and Akkerman, R. and Boisse, P. and Chen, J. and Cheng, H.S. and Graaf, E.F. de and Gorczyca, J.L. and Harrison, P. (2008) Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results. Composites Part A: Applied Science and Manufacturing, 39 (6). pp. 1037-1053. ISSN 1359-835X

Grouve, W.J.B. and Warnet, L. and Boer, A. de and Akkerman, R. and Vlekken, J. (2008) Delamination detection with fibre Bragg gratings based on dynamic behaviour. Composites Science and Technology, 68 (12). pp. 2418-2424. ISSN 0266-3538

Visser, H.A. and Hermkens, R.M.J. and Wolters, M. and Weller, J. and Warnet, L.L. (2008) Excellent impact performance of PVC pipeline materials in gas distribution networks after many years of service. In: International Gas Union Research Conference, IGCR, 8-10 October 2008, Paris, France.

Haanappel, S.P. and Akkerman, R. (2008) Non-crimp fabric permeability modelling. In: 9th International Conference on Flow Processes in Composite Materials, FPCM, 8-10 July 2008, Montreal, Canada.

Loendersloot, R. and Grouve, W.J.B. and Akkerman, R. and Berg, S. van den (2008) Permeability prediction using a multigrid method. In: 9th International Conference on Flow Processes in Composite Materials, FPCM-9 2008, 8-10 July 2008, Montreal, Canada.

Thije, R.H.W. ten and Akkerman, R. (2008) Solutions to intra-ply shear locking in finite element analyses of fibre reinforced materials. Composites Part A: Applied Science and Manufacturing, 39 (7). pp. 1167-1176. ISSN 1359-835X

Thije, R.H.W. ten and Akkerman, R. and Meer, L. van der and Ubbink, M.P. (2008) Tool-ply friction in thermoplastic composite forming. International Journal of Material Forming, 1 (Suppl.). pp. 953-956. ISSN 1960-6206

Grouve, W.J.B. and Akkerman, R. and Loendersloot, R. and Berg, S. van den (2008) Transverse permeability of woven fabrics. In: 11th ESAFORM Conference on Material Forming 2008, April 23-25, 2008, Lyon, France.

Grouve, W.J.B. and Akkerman, R. and Loendersloot, R. and Berg, S. van den (2008) Transverse permeability of woven fabrics. International journal of material forming, 1 (Suppl.). pp. 859-862. ISSN 1960-6206

2007

Visser, H.A. and Engels, T.A.P. and Govaert, L.E. and Bor, T.C. (2007) A new engineering approach to predict the hydrostatic strength of uPVC
pipes.
In: PPS E/A, 2007, Göteborg, Sweden.

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2007) Adhesion Characterisation of Inkjet Printed Silver Tracks. In: 2nd International Student Conference on Print and Media Technology, Printing Future Days 2007, November 5-8, 2007, Chemnitz, Germany (pp. pp. 209-210).

Akkerman, Remko and Villa Rodriguez, Lasimir Hadir (2007) Braiding Simulation and Slip Evaluation for Arbitrary Mandrels. In: 10th International ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain.

Boisse, Philippe and Akkerman, Remko and Cao, Jian and Chen, Julie and Lomov, Stepan and Long, Andrew (2007) Composites Forming. In: Francisco Chinesta & Elias Cueto (Eds.), Advances in Material Forming : Esaform 10 years on. Springer, pp. 61-79. ISBN 9782287721427

Akkerman, R. and Lamers, E.A.D. (2007) Constitutive modelling. In: A.C. Long (Ed.), Composites forming technologies. CRC Press, Boca Raton, FL. ISBN 9781845690335

Kessels, Josef F.A. and Jonker, Attie S. and Akkerman, Remko (2007) Fully 2 1/2D flow modeling of resin infusion under flexible tooling using unstructured meshes and wet and dry compaction properties. Composites Part A: Applied Science and Manufacturing, 38 (1). pp. 51-60. ISSN 1359-835X

Thije, R.H.W. ten and Akkerman, R. (2007) Intra-ply shear locking. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 1017-1022).

Thije, R.H.W. ten and Akkerman, R. and Huetink, J. (2007) Large deformation simulation of anisotropic material using an updated Lagrangian finite element method. Computer Methods in Applied Mechanics and Engineering, 196 (33-34). pp. 3141-3150. ISSN 0045-7825

Kessels, Josef F.A. and Jonker, Attie S. and Akkerman, Remko (2007) Optimising the flow pipe arrangement for resin infusion under flexible tooling. Composites Part A: Applied Science and Manufacturing, 38 (9). pp. 2076-2085. ISSN 1359-835X

2006

Loendersloot, R. and Akkerman, R. (2006) A permeability prediction for non-crimp fabrics. In: The 8th International Conference on Flow Processes in Composite Materials (FPCM8, 11-13 July 2006, Douai, France.

Loendersloot, R. and Akkerman, R. (2006) A permeability prediction for non-crimp fabrics. In: ESAFORM 2006, 26-28 April 2006, Strathclyde, Glasgow.

Akkerman, R. and Villa Rodriguez, B.H. (2006) Braiding simulation for RTM preforms. In: 8th International Conference on Textile Composites, TexComp 2006, 16-18 October, 2006, Nottingham, UK.

Loendersloot, R. and Lomov, S.V. and Akkerman, R. and Verpoest, I. (2006) Carbon composites based on multiaxial multiply stitched preforms. Part V: geometry of sheared biaxial fabrics. Composites Part A: Applied Science and Manufacturing, 37 (1). pp. 103-113. ISSN 1359-835X

Warnet, L. and Hulskamp, A.W. and Akkerman, R. (2006) Damage development around moulded-in holes in flat braided composites. In: 8th International Conference on Textile Composites, TexComp 2006, 16-18 October, 2006, Nottingham, UK.

Ven, E.C. van der and Loendersloot, R. and Akkerman, R. (2006) Experimental investigation of the compressibility and permeability of fabric reinforcements. In: 8th International Conference on Flow Processes in Composite Materials, FPCM 2006, 11-13 July 2006, Douai, France.

Ven, E.C. van der and Loendersloot, R. and Akkerman, R.A. (2006) Experimental investigation of the compressibility and permeability of fabric reinforcements : abstract. In: 3rd International Symposium on Manufacturing Technology for Composite Aircraft Structures, 17-18 May 2006, Marknesse, the Netherlands.

Ven, E.C. van der and Loendersloot, R. and Akkerman, R.A. (2006) Experimental verification of out-of-plane permeability : powerpoint presentation. In: 3rd International Symposium on Manufacturing Technology for Composite Aircraft Structures, 17-18 May 2006.

Lin, H. and Harrison, P. and Haar, K. van de and Long, A.C. and Akkerman, R. and Clifford, M.J. (2006) Investigation of tool-ply friction of viscous textile composites. In: 8th International Conference on Textile Composites, TexComp 2006, 16-18 October, 2006, Nottingham, UK.

Akkerman, Remko (2006) Laminate mechanics for balanced woven fabrics. Composites Part B: Engineering, 37 (2-3). pp. 108-116. ISSN 1359-835X

Thije, R.H.W. ten and Akkerman, R. and Huetink, J. (2006) Large Deformation Simulation of Anisotropic Material. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK.

Kruijer, M.P. and Warnet, L.L. and Akkerman, R. (2006) Modelling of the viscoelastic behaviour of steel reinforced thermoplastic pipes. Composites Part A: Applied Science and Manufacturing, 37 (2). pp. 356-367. ISSN 1359-835X

2005

Kruijer, M.P. and Warnet, L.L. and Akkerman, R. (2005) Analysis of the mechanical properties of a reinforced thermoplastic pipe (RTP). Composites Part A: Applied Science and Manufacturing, 36 (2). pp. 291-300. ISSN 1359-835X

Lomov, S.V. and Barburski, M. and Stoilova, Tz. and Verpoest, I. and Akkerman, R. and Loendersloot, R. and Thije, R.H.W. ten (2005) Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preforms. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1188-1206. ISSN 1359-835X

Reinders, A.H.M.E. and Akkerman, R. (2005) Design, production and materials of PV-powered consumer products - The case of mass production. In: 20th European Photovoltaic Solar Energy Conference and Exhibition, 6-10 June 2005, Barcelona, Spain.

Thije, R.H.W. ten and Akkerman, R. and Loendersloot, R. (2005) Drape simulation of non-crimp fabrics. In: 8th ESAFORM Conference on Material Forming 2005, April 27-29, 2005, Cluj-Napoca, Romania.

Thije, R.H.W. ten and Akkerman, R. (2005) Finite element simulation of draping with non-crimp fabrics. In: Fifteenth International Conference on Composite Materials, ICCM-15, 27 June-1 July 2005, Durban, South-Africa.

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2005) Spring-forward in composite plate elements. In: 8th ESAFORM Conference on Material Forming 2005, April 27-29, 2005, Cluj-Napoca, Romania.

2004

Loendersloot, R. and Akkerman, R. and Lomov, S.V. (2004) A permeability prediction for (un)sheared non-crimp fabrics. In: 7th International Conference on Flow Processes in Composite Materials, 7-9 July 2004, Newark, Delaware, USA.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2004) Modelling shape distortions in composite products. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004 , Trondheim, Norway.

Loendersloot, R. and Ruijter, W. and Akkerman, R. (2004) Multigrid & Network Approach based Permeability Prediction [Poster]. In: 7th engineering mechanics symposium, November 22-23 2004, Rolduc, Kerkrade.

Loendersloot, R. and Akkerman, R. (2004) Permeability Experiments: Design, development and methodology of a resin transfer moulding measuring device [Abstract]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Loendersloot, R. and Thije, R.H.W. ten and Akkerman, R. and Lomov, S.V. (2004) Permeability prediction of non-crimp fabrics based on a geometric model. In: 11th European conference on composite materials, May 31 - June 3, 2004, Rhodes, Greece.

2003

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2003) Drape Modelling of Multi-Layered Composites. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Dijkstra, P.T.S. and Gaymans, R.J. and Dijk, D.J. van and Huetink, J. (2003) Elasticity at Large Deformations and High Strain Rates in Injection Molded Polypropylene. Polymer Engineering and Science, 43 (9). pp. 1613-1623. ISSN 0032-3888

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2003) Fibre Orientation Modelling for Rubber Press Forming of Thermoplastic Laminates. International Journal of Forming Processes, 6 (3-4). pp. 443-463. ISSN 1292-7775

Ruijter, W. and Spallino, R. and Warnet, L. and Boer, A. de (2003) Optimization of composite panels using neural networks and genetic algorithms. In: Second MIT Conference on Compurational Fluid and Solid Mechanics, June 17–20, 2003, Boston MA, USA (pp. pp. 2359-2363).

Loendersloot, R. and Thije, R.H.W. ten and Akkerman, R. and Lomov, S.V. (2003) Permeability Prediction of Non-Crimp Fabrics Based on a Geometric Model. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Wijskamp, S. and Akkerman, R. and Lamers, E.A.D. (2003) Residual stresses in non-symmetrical carbon/epoxy laminates. In: ICCM 14, International conference on composites: Bridging the Gap Between Academia and Industry,, July 14-18, 2003, San Diego, California.

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2003) Residual stresses in rubber formed thermoplastic composites. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Warnet, L.L. and Akkerman, R. and Reed, P.E. (2003) The effect of residual stress on transverse cracking in crossply carbon-polyetherimide laminates under bending. In: B.R.K. Blackman & A. Pavan & J.G. Williams (Eds.), Fracture of Polymers, Composites and Adheives II. European Structural Integrity Society, 32 . Elsevier, pp. 465-476. ISBN 9780080441955

2002

Dijkstra, P.T.S. and Dijk, D.J. van and Huetink, J. (2002) A microscopy study of the transition from yielding to crazing in polypropylene. Polymer Engineering and Science, 42 (1). pp. 152-160. ISSN 0032-3888

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2002) Drape modelling of multilayer fabric reinforced thermoplastic laminates. In: Sixth International Conference on Textile Composites (TEXCOMP 6), September 11-13, 2002, Philadelphia, Pennsylvania, USA.

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2002) Fibre Orientation Modelling for Rubber Press Forming of Thermoplastic Laminates. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Akkerman, R. and Warnet, L.L. and Ven, E.C. van der (2002) Impact damage in woven fabric reinforced composites. In: 5th International Conference on Textile Composites, TexComp 2002, 11-13 September 2002, Philadelphia, PA, USA.

Akkerman, R. (2002) On the properties of quasi-isotropic laminates. Composites Part B: Engineering, 33 (2). pp. 133-140. ISSN 1359-835X

Kessels, J.F.A. and Akkerman, R. (2002) Prediction of the yarn trajectories on complex braided preforms. Composites Part A: Applied Science and Manufacturing, 33 (8). pp. 1073-1081. ISSN 1359-835X

Akkerman, R. and Kessels, J.F.A. (2002) Simulations of the braiding process for RTM preforms. In: 5th International Conference on Textile Composites, TexComp 2002, 11-13 September 2002, Philadelphia, PA, USA.

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2002) Spring forward of woven fabric reinforced composites. In: 5th International Conference on Textile Composites, TexComp 2002, 11-13 September 2002, Philadelphia, PA, USA.

Wijskamp, Sebastiaan and Lamers, Edwin and Akkerman, Remko and Ven, Erik van de (2002) Warpage of rubber pressed composites. In: 10th European Conference on Composite Materials, ECCM 2002, 3-7 June 2002, Brugge, Belgium .

2001

Akkerman, Remko (2001) Double dome experiment. In: NSF Workshop on Composite Sheet Forming, September 5-7, 2001, Lowell, MA, USA.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2001) Finite Element Modelling of fabric draping [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2001) Modelling of fabric draping: Finite elements versus a geometrical method. In: 4th ESAFORM Conference on Material Forming 2001, April 23-25, 2001, Liège, Belgium.

Loendersloot, R. and Akkerman, R. (2001) Resin Transfer Moulding of high performance composites [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Warnet, L. and Greasley, A. (2001) Transient forces generated by projectiles on variable quality mouthguards monitored by instrumented impact testing. British Journal of Sports Medicine, 35 (4). pp. 257-262. ISSN 0306-3674

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2001) Warping of rubber pressed composite panels [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

2000

Akkerman, R. and Reed, P.E. and Huang, K.Y. and Warnet, L. (2000) Comparison of fracture toughness (GIC) values of polyetherimide (PEI) and a carbon-fibre/PEI composite: an experimental and theoretical study. In: Second ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives, 13-15 September 1999, Les Diablerets, Switzerland (pp. pp. 3-14).

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2000) Effects of out-of-plane properties on distortions of composite panels. In: A.G. Gibson (Ed.), FRC 2000 : composites for the millennium : Eight International Conference on Fibre Reinforced Composites. Woodhead Publishing, pp. 361-368. ISBN 9781855735507

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2000) Modelling of Residual Stresses in Rubber Pressed Composite Products. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2000) Modelling the distortions of skewed woven fabric reinforced composites. In: Fifth International Conference on Textile Composites (TEXCOMP 5), September 18-20, 2000, Katholieke Universiteit Leuven, Belgium.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2000) Modelling the thermo-elastic properties of skewed woven fabric reinforced composites. In: 9th European Conference on Composite Materials, ECCM, June 4-7 2000, Brighton, UK.

Warnet, Laurent Louis (2000) On the effect of residual stresses on the transverse cracking in cross-ply carbon-polyetherimide laminates. thesis.

1999

Jansen, K.M.B. and Orij, J.J.W. and Dijk, D.J. van and Meijer, C.Z. (1999) Comparison of residual stress predictions and measurements using excimer laser layer removal. Polymer Engineering and Science, 39 (10). pp. 2030-2041. ISSN 0032-3888

Akkerman, Remko and Pronk, Ruud (1999) Vacuum forming of thermoplastic foam. Polymer Engineering and Science, 39 (10). pp. 2064-2074. ISSN 0032-3888

1998

Helm, P.N. and Huetink, J. and Akkerman, R. (1998) Comparison of artificial dissipation and limited flux schemes in Arbitrary Lagrangian-Eulerian finite element formulations. International Journal for Numerical Methods in Engineering, 41 (6). pp. 1057-1076. ISSN 0029-5981

Jansen, K.M.B. and Dijk, D.J. van and Husselman, M.H. (1998) Effect of processing conditions on shrinkage in injection molding. Polymer Engineering and Science, 38 (5). pp. 838-846. ISSN 0032-3888

Wiersma, H.W. and Peeters, L.J.B. and Akkerman, R. (1998) Prediction of springforward in continuous-fibre/polymer L-shaped parts. Composites Part A: Applied Science and Manufacturing, 29 (11). pp. 1333-1342. ISSN 1359-835X

Jansen, K.M.B. and Dijk, D.J. van and Freriksen, M.J.A. (1998) Shrinkage anisotropy in fiber reinforced injection molded products. Polymer Composites, 19 (4). pp. 325-334. ISSN 0272-8397

Akkerman, R. and Vries, R.S. de (1998) Thermomechanical properties of woven fabric composites. In: 7th International Conference on Fibre Reinforced Composites, FRC 1998, 15-17 April 1998 , Newcastle upon Tyne, UK.

1997

Akkerman, Remko and Pronk, Ruud M. (1997) Thermoforming of foam sheet. In: Polymer Processing Society, PPS Conference '97, Europe/Africa Region Meeting, 19-21 August 1997, Gothenburg, Sweden.

This list was generated on Thu Mar 30 07:13:24 2017 CEST.