Research Group: Mechanica van vormgevings- en verwerkingsprocessen processen / Mechanics of Forming Technology (MFT)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Number of items: 74.

Article

Naghibi Beidokhti, H. and Janssen, Dennis and Khoshgoftar, M. and Sprengers, A. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Verdonschot, N.J.J. (2016) A comparison between dynamic implicit and explicit finite element simulations of the native knee joint. Medical engineering & physics, 38 (10). 1123 - 1130. ISSN 1350-4533

Karupannasamy, D.K. and Hol, J. and Rooij, M.B. de and Meinders, V.T. and Schipper, D.J. (2014) A friction model for loading and reloading effects in deep drawing process. Wear, 318 (1-2). 27 - 39. ISSN 0043-1648

Hazrati Marangalou, J. and Ito, K. and Rietbergen, B. van (2012) A new approach to determine the accuracy of morphology–elasticity relationships in continuum FE analyses of human proximal femur. Journal of biomechanics . ISSN 0021-9290

Hazrati Marangalou, J. and Ito, K. and Rietbergen, Bert van (2015) A novel approach to estimate trabecular bone anisotropy from stress tensors. Biomechanics and modeling in mechanobiology . ISSN 1617-7959

Hazrati Marangalou, J. and Ito, K. and Cataldi, M. and Taddei, F. and Rietbergen, B. van (2013) A novel approach to estimate trabecular bone anisotropy using a database approach. Journal of biomechanics . ISSN 0021-9290

Lekadir, K. and Hoogendoorn, C. and Hazrati Marangalou, J. and Taylor, Z. and Noble, C. and Rietbergen, B. van and Frangi, A. (2015) A predictive model of vertebral trabecular anisotropy from ex vivo micro-CT. IEEE transactions on medical imaging . ISSN 0278-0062

Emmens, W.C. and Boogaard, A.H. van den (2014) A yield criterion based on mean shear stress. Key engineering materials, 611-612 . 3 - 10. ISSN 1013-9826

Mulder, J. and Vegter, H. and Aretz, H. and Keller, S. and Boogaard, A.H. van den (2015) Accurate determination of flow curves using the bulge test with optical measuring systems. Journal of materials processing technology, 226 . 169 - 187. ISSN 0924-0136

Mulder, J. and Vegter, H. and Boogaard, A.H. van den (2015) An engineering approach to strain rate and temperature compensation of the flow stress established by the hydraulic bulge test. Key engineering materials, 651-653 . 138 - 143. ISSN 1013-9826

Geijselaers, H.J.M. and Bor, T.C. and Hilkhuijsen, P. and Boogaard, A.H. van den (2015) Cyclic shear behavior of austenitic stainless steel sheet. Computer methods in materials science = Informatyka w Technologii Materialow, 15 (1). 9 - 18. ISSN 1641-8581

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Meinders, V.T. and Boogaard, A.H. van den (2016) Determination of strain hardening parameters of tailor hardened boron steel up to high strains using inverse FEM optimization and strain field matching. Journal of materials processing technology, 228 . 43 - 58. ISSN 0924-0136

Venema, J. and Matthews, D.T.A. and Hazrati Marangalou, J. and Wormann, J. and Boogaard, A.H. van den (2017) Friction and Wear Mechanisms During Hot Stamping of AlSi Coated Press Hardening Steel. Wear . ISSN 0043-1648

Liu, S. and Bor, T.C. and Stelt, A.A. van der and Geijselaers, H.J.M. and Kwakernaak, C. and Kooijman, A.M. and Mol, J.M.C. and Akkerman, R. and Boogaard, A.H. van den (2015) Friction surface cladding: An exploratory study of a new solid state cladding process. Journal of materials processing technology, 229 . 769 - 784. ISSN 0924-0136

Wang, C. and Geijselaers, H.J.M. and Omerspahic, E. and Recina, V. and Boogaard, A.H. van den (2016) Influence of ring growth rate on damage development in hot ring rolling. Journal of materials processing technology, 227 . 268 - 280. ISSN 0924-0136

Hazrati Marangalou, J. and Ito, K. and Taddei, F. and Rietbergen, B. van (2014) Inter-individual variability of bone density and morphology distribution in the proximal femur and T12 vertebra. Bone . ISSN 8756-3282

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Boogaard, A.H. van den (2015) Large strain cyclic behavior of metastable austenic stainless steel. Materials science & engineering A, 631 . 166 - 172. ISSN 0921-5093

Badilatti, Sandro D. and Christen, Patrik and Levchuk, Alina and Hazrati Marangalou, Javad and Rietbergen, Bert van and Parkinson, Ian and Müller, Ralph (2016) Large-scale microstructural simulation of load-adaptive bone remodeling in whole human vertebrae. Biomechanics and modeling in mechanobiology, 15 (1). 83 - 95. ISSN 1617-7959

Hazrati Marangalou, J. and Eckstein, F. and Kuhn, V. and Ito, K. and Cataldi, M. and Taddei, F. and Rietbergen, B. van (2014) Locally measured microstructural parameters are better associated with vertebral strength than whole bone density. Osteoporosis international . ISSN 0937-941X

Boogaard, A.H. van den and Havinga, G.T. and Tijum, R. van (2015) Model-based control of strip bending in mass production. CIRP annals : manufacturing technology, 64 (1). 297 - 300. ISSN 0007-8506

Hol, J.D. and Meinders, V.T. and Rooij, M.B. de and Boogaard, A.H. van den (2015) Multi-scale friction modeling for sheet metal forming: the boundary lubrication regime. Tribology international, 81 . 112 - 128. ISSN 0301-679X

Hol, J. and Meinders, V.T. and Geijselaers, H.J.M. and Boogaard, A.H. van den (2015) Multi-scale friction modeling for sheet metal forming: the mixed lubrication regime. Tribology international, 85 . 10 - 25. ISSN 0301-679X

Wiebenga, J.H. and Boogaard, A.H. van den (2014) On the effect of numerical noise in approximate optimization of forming processes using numerical simulations. International journal of material forming, 7 (3). 317 - 335. ISSN 1960-6206

Boogaard, A.H. van den and Havinga, G.T. and Belin, A. and Barlat, F. (2016) Parameter reduction for the Yld2004-18p yield criterion. International journal of material forming, 9 (2). 175 - 178. ISSN 1960-6206

Lekadir, Karim and Noble, Christopher and Hazrati Marangalou, Javad and Hoogendoorn, Corné and Rietbergen, Bert van and Taylor, Zeike A. and Frangi, Alejandro F. (2016) Patient-specific biomechanical modeling of bone strength using statistically-derived fabric tensors. Annals of biomedical engineering, 44 (1). 234 - 246. ISSN 0090-6964

Perdahcioglu, E.S. and Hou, B. and Boogaard, A.H. van den (2015) Physically based criterion for prediction of instability under stretchbending of sheet metal. Key engineering materials, 651-653 . 144 - 149. ISSN 1013-9826

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Hatscher, A. and Meinders, V.T. and Boogaard, A.H. van den (2014) Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties. Journal of materials processing technology, 214 (6). 1211 - 1227. ISSN 0924-0136

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Geijselaers, H.J.M. and Meinders, V.T. and Boogaard, A.H. van den (2016) Plasticity and fracture modeling of the heat-affected zone in resistance spot welded tailor hardened boron steel. Journal of materials processing technology, 234 . 309 - 322. ISSN 0924-0136

Havinga, G.T. and Boogaard, A.H. van den and Klaseboer, G. (2016) Sequential improvement for robust optimization using an uncertainty measure for radial basis functions. Structural and multidisciplinary optimization . ISSN 1615-147X

Wits, W.W. and Bruins, R. and Terpstra, L. and Huls, R.A. and Geijselaers, H.J.M. (2015) Single scan vector prediction in selective laser melting. AddItive manufacturing, 9 . 1 - 6. ISSN 2214-8604

Lekadir, Karim and Hazrati Marangalou, J. and Hoogendoorn, Corné and Taylor, Zeike A. and Rietbergen, Bert van and Frangi, Alejandro F. (2015) Statistical estimation of femur micro-architecture using optimal shape and density predictors. Journal of biomechanics, 48 (4). 598 - 603. ISSN 0021-9290

Wiebenga, J.H. and Atzema, E.H. and Boogaard, A.H. van den (2015) Stretching the limits of forming processes by robust optimization: A numerical and experimental demonstrator. Journal of materials processing technology, 217 . 345 - 355. ISSN 0924-0136

Hou, B. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Kitting, D. (2014) Study on instability and forming limit of sheet metal under stretch-bending. Key engineering materials, 611-612 . 84 - 91. ISSN 1013-9826

Humbert, Ludovic and Hazrati Marangalou, Javad and Río Barquero, Luis Miguel del and Lenthe, G. Harry van and Rietbergen, Bert van (2016) Technical Note: Cortical thickness and density estimation from clinical CT using a prior thickness-density relationship. Medical physics, 43 (4). 1945 -. ISSN 0094-2405

Widmer Soyka, Rene P. and Helgason, Benedikt and Hazrati Marangalou, Javad and Bergh, Joop P. van den and Rietbergen, Bert van and Ferguson, Stephen J. (2016) The effectiveness of percutaneous vertebroplasty is determined by the patient-specific bone condition and the treatment strategy. PLoS ONE, 11 (4). e0151680 -. ISSN 1932-6203

Eyckens, P. and Mulder, J. and Gawad, J. and Vegter, H. and Roose, D. and Boogaard, A.H. van den and Van Bael, A. and Van Houtte, P. (2015) The prediction of differential hardening behaviour of steels by multi-scale crystal plasticity modelling. International journal of plasticity, 73 . 119 - 141. ISSN 0749-6419

Vegter, Henk and Mulder, Hans and Liempt, Peter van and Heijne, Jan (2016) Work hardening descriptions in simulation of sheet metal forming tailored to material type and processing. International journal of plasticity, 80 . 204 - 221. ISSN 0749-6419

Conference or Workshop Item

Naghibi Beidokhti, Hamid and Khoshgoftar, Mehdi and Sprengers, A.M.J. and Boogaard, A.H. van den and Janssen, D.W. and Verdonschot, N.J.J. (2014) A Comparison Between Dynamic Implicit And Explicit Finite Element Simulations Of Native Knee Joint. In: Computer Methods in Biomechanics and Biomedical Engineering 2014, 13-10-2014 - 15-10-2015, Amsterdam (pp. 255 - 256).

Torkabadi, A. and Liempt, P. van and Meinders, V.T. and Boogaard, A.H. van den (2015) A constitutive model for the anelastic behavior of Advanced High Strength Steels. In: COMPLAS XIII, 01-09-2015 - 03-09-2015, Barcelona (pp. 378 - 385).

Farzan Nasab, F. and Geijselaers, H.J.M. and Boer, A. de (2016) A multi-level set gradient based algorithm for buckling optimization of blended composite structures. In: 5th Aircraft Structural Design Conference, Manchester.

Hol, J. and Wiebenga, J.H. and Dane, C. and Meinders, V.T. and Boogaard, A.H. van den (2014) A software solution for advanced friction modeling applied to sheet metal forming. In: IDDRG 2014, 02-06-2014 - 05-06-2014, Paris (pp. 344 - 349).

Dallinger, F.N. and Roux, E.P. and Havinga, G.T. and d'Ippolito, R. and Tijum, R. van and Ravenswaaij, R. van and Hora, P. and Boogaard, A.H. van den (2014) Adaptive process control strategy for a two-step bending process. In: SDM'2014, International Conference on Sustainable Design and Manufacturing, Cardiff, 28-30 April 2014, 28-04-2014 - 30-04-2014, Cardiff (pp. 618 - 627).

Meinders, V.T. and Hol, J. and Boogaard, A.H. van den (2014) Boundary and Mixed Lubrication Friction Modeling under forming process conditions. In: Numisheet 2014, 06-01-2014 - 10-01-2014, Melbourne (pp. 912 - 917).

Kooiker, H. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2016) Constitutive modeling of hot horming of austenitic stainless steel 316LN by accounting for recrystallization in the dislocation evolution. In: NUMISHEET 2016: 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, 04-09-2016 - 09-09-2016.

Mulder, J. and Eyckens, P. and Boogaard, A.H. van den (2015) Differential hardening in IF steel - Experimental results and a crystal plasticity based model. In: 8th Forming Technology Forum, 29-06-2015 - 30-06-2015, Zurich (pp. 113 - 118).

Naseem, S. and Boogaard, A.H. van den (2016) Experimentation and Numerical Modeling of Forging Induced Bending (FIB) Process. In: ESAFORM 2016, 27-04-2016 - 29-04-2016, Nantes, France.

Perdahcioglu, E.S. and Audish, D. and Boogaard, A.H. van den and Janssen, D. and Verdonschot, N.J.J. (2013) Failure modelling of human femur. In: 3rd International Conference on Material Modelling, 08-09-2013 - 11-09-2013, Warsaw (pp. 259 - 259).

Liu, S. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2015) Friction Surface Cladding of AA1050 on AA2024-T351; influence of clad layer thickness and tool rotation rate. In: FSWP'2015, 01-10-2015 - 02-10-2015, San Sebastian, Spain.

Sigvant, M. and Pilthammar, J. and Hol, J. and Wiebenga, J.H. and Chezan, A.R. and Carleer, B.D. and Boogaard, A.H. van den (2016) Friction and lubrication modeling in sheet metal forming simulations of a Volvo XC90 inner door. In: IDDRG 2016, 12-06-2016 - 15-06-2016, Linz (pp. 658 - 663).

Sigvant, M. and Pilthammar, J. and Hol, J. and Wiebenga, J.H. and Chezan, A.R. and Carleer, B.D. and Boogaard, A.H. van den (2016) Friction and lubrication modelling in sheet metal forming simulations of the Volvo XC90 inner door. In: Numisheet 2016, 04-09-2016 - 09-09-2016, Bristol.

Sigvant, M. and Pilthammar, J. and Hol, J. and Wiebenga, J.H. and Chezan, A.R. and Carleer, B.D. and Boogaard, A.H. van den (2016) Friction in sheet metal forming: simulations of the Volvo XC90 inner door. In: Forming Technology Forum 2016, 12-09-2016 - 13-09-2016, München.

Sigvant, M. and Hol, J. and Chezan, A.R. and Boogaard, A.H. van den (2015) Friction modelling in sheet metal forming simulations: application and validation on an U-Bend product. In: 8th Forming Technology Forum, 29-06-2015 - 30-06-2015, Zurich (pp. 135 - 142).

Perdahcioglu, E.S. and Soyarslan, C. and Boogaard, A.H. van den and Bargmann, S. (2016) Gradient Enhanced Physically Based Plasticity: Implementation and Application to a Problem Pertaining Size Effect. In: ESAFORM 2016, 27-04-2016 - 29-04-2016.

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Meinders, V.T. and Boogaard, A.H. van den (2014) Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel. In: Forming Technology Forum, 15-09-2014 - 16-09-2014, Enschede (pp. 55 - 62).

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Meinders, V.T. and Boogaard, A.H. van den (2015) Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel. In: 16th International Conference on Sheet Metal, Erlangen-Nürnberg, 16-18 March 2015, 16-03-2015 - 18-03-2015, Erlangen-Nürnberg (pp. 369 - 376).

Wang, C. and Boogaard, A.H. van den and Omerspahic, E. and Recina, V. and Geijselaers, H.J.M. (2014) Influence of feed rate on damage development in hot ring rolling. In: 11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014, Nagoya Congress Center, Nagoya, Japan, 19-10-2014 - 24-10-2014, Nagoya, Japan (pp. 292 - 297).

Wang, C. and Geijselaers, H.J.M. and Omerspahic, E. and Recina, V. and Boogaard, A.H. van den (2014) Influence of ring growth rate on damage development in hot ring rolling. In: 7th Forming Technology Forum, 15-09-2014 - 16-09-2014, Enschede (pp. 159 - 163).

Havinga, G.T. and Boogaard, A.H. van den and Dallinger, F.N. and Hora, P. (2014) Inline control of a strip bending process in mass production. In: IDDRG, 01-06-2014 - 04-06-2014, Paris (pp. 175 - 180).

Misiun, Grzegorz and Wang, Chao and Geijselaers, Hubert and Boogaard, Ton van den (2016) Interpolation of final geometry and result fields in process parameter space. In: NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, 04-07-2016 - 07-07-2016, Troyes, France (pp. p. 13006).

Havinga, G.T. and Boogaard, A.H. van den (2015) Inverse identification of process variations for thin steel sheet bending. In: ESAFORM 2015, 15-04-2015 - 17-04-2015 (pp. 1363 - 1368).

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Boogaard, A.H. van den (2016) Investigation of stress partitioning in a two-phase steel by cyclic shear tests. In: Forming Techonology Forum 2016, 12-09-2016 - 13-09-2016.

Wang, C. and Geijselaers, H.J.M. and Boogaard, A.H. van den (2013) Multi-Stage FE Simulation of Hot Ring Rolling. In: The 11th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 2013, 6–10 July 2013, Shenyang, China, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 1014 - 1019).

Yue, Z. M. and Badreddine, H. and Saanouni, K. and Perdahcioglu, E.S. and Soyarslan, C. and Tekkaya, A. E. and Boogaard, A.H. van den (2014) On the distortion of yield surface under complex loading paths in sheet metal forming. In: IDDRG, 01-06-2014 - 04-06-2014, Paris (pp. 246 - 251).

Torkabadi, A. and Meinders, V.T. and Boogaard, A.H. van den (2016) On the nonlinear anelastic behaviour of AHSS. In: NUMISHEET 2016, 04-09-2016 - 09-09-2016.

Liu, S. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2016) Parameter Study for Friction Surface Cladding of AA1050 on AA2024-T351. In: 11th International Symposium on Friction Stir Welding, 17-05-2016 - 19-05-2016, Cambridge, UK.

Dallinger, F.N. and Roux, E.P. and Hora, P. and Barlat, F. and Boogaard, A.H. van den (2014) Strain path dependent evolution of yield locus based on HAH model description. In: IDDRG 2014, Paris, June 1-4, 01-06-2014 - 04-06-2015, Paris (pp. 163 - 168).

Wiebenga, J.H. and Atzema, E.H. and Boogaard, A.H. van den (2014) Stretching the limits of forming processes by robust optimization: A demonstrator. In: NUMISHEET 2014 Conference, 06-01-2014 - 10-01-2014, Melbourne (pp. 1061 - 1067).

Vegter, Henk and Mulder, Hans and Liempt, Peter van and Heijne, Jan (2014) Tailored Work Hardening Descriptions in Simulation of Sheet Metal Forming. In: Numisheet 2014, 06-01-2014 - 10-01-2014, Melbourne (pp. 474 - 481).

Havinga, G.T. and Boogaard, A.H. van den (2016) The effect of tooling deformation on process control in multistage metal forming. In: ESAFORM, 27-04-2016 - 29-04-2016 (pp. 060010-1 - 060010-6).

Boogaard, A.H. van den and Havinga, G.T. (2016) The evolution of forming process models – from process simulation to model-based control. In: Numiform 2016, 04-07-2016 - 07-07-2016, Troyes (pp. 1 - 2).

Liu, S. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2015) Thermal and Flow Analysis of Friction Surface Cladding with Varying Clad Layer Thickness. In: IDDRG 2015, 31-05-2015 - 03-06-2015, Shanghai.

Geijselaers, H.J.M. and Wang, Chao and Miroux, A. and Recina, V. and Boogaard, A.H. van den (2016) Use of Gleeble MAXStrain unit for study of damage development in hot forging. In: Numiform 2016, 04-07-2016 - 07-07-2016, Troyes.

Lecture

Boogaard, A.H. van den (2015) Nonlinear solid mechanics- een modellenbureau. [Lecture]

Thesis

Havinga, Gosse Tjipke (2016) Optimization and control of metal forming processes. thesis.

Wang, Chao (2016) Simulation of damage evolution during hot ring rolling. thesis.

This list was generated on Sat Jun 24 06:43:18 2017 CEST.