Research Group: Design, Production and Management (DPM)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1988 | 1986 | 1982 | 1981 | 1980 | 1975
Number of items: 550.

2015

Dijkstra, Theo K. and Henseler, Jörg (2015) Consistent and asymptotically normal PLS estimators for linear structural equations. Computational statistics & data analysis, 81 . 10 - 23. ISSN 0167-9473

2014

Karupannasamy, D.K. and Hol, J. and Rooij, M.B. de and Meinders, V.T. and Schipper, D.J. (2014) A friction model for loading and reloading effects in deep drawing process. Wear, 318 (1-2). 27 - 39. ISSN 0043-1648

Haveman, Steven P. and Bonnema, G. Maarten and Berg, Freek G.B. van den (2014) Early Insight in Systems Design through Modeling and Simulation. Procedia computer science, 28 . pp. 171-178. ISSN 1877-0509

Koissin, V. and Demcenko, A. and Korneev, V.A. (2014) Isothermal epoxy-cure monitoring using nonlinear ultrasonics. International journal of adhesion and adhesives, 52 . 11 - 18. ISSN 0143-7496

Baran, Ismet and Akkerman, Remko and Hattel, Jesper H. (2014) Material characterization of a polyester resin system for the pultrusion process. Composites. Part B : Engineering, 64 . 194 - 201. ISSN 1359-8368

Demcenko, A. and Koissin, V. and Korneev, V.A. (2014) Noncollinear wave mixing for measurement of dynamic processes in polymers: Physical ageing in thermoplastics and epoxy cure. Ultrasonics, 54 . 684 - 693. ISSN 0041-624X

2013

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de (2013) Actuator voor helikopterflaps. Technisch weekblad, 2013 .

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composite. In: SAMPE Benelux student meeting: book of abstracts, 14-15 January 2012, Namur, Belgium (pp. 25 - 26).

Sanchez Ramirez, Andrea and Loendersloot, Richard and Jauregui Becker, Juan Manuel and Tinga, Tiedo (2013) Design Framework for Vibration Monitoring Systems for Helicopter Rotor Blade Monitoring Using Wireless Sensor Networks. In: International Workshop on Structural Health Monitoring, 10-09-2013 - 12-09-2013, Stanford, CA, U.S.A. (pp. 1023 - 1030).

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2013) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: New Trends in Smart Technologies. Fraunhofer Verlag, Stuttgart, 99 - 108. ISBN 9783839605776

Geelen, Daphne and Reinders, Angèle and Keyson, David (2013) Empowering the end-user in smart grids: Overview of and recommendations for the design or products and services. Energy Policy, 61 . 151 - 161. ISSN 0301-4215

Paternoster, A.R.A. and Loendersloot, R. and Warnet, L. and Boer, A. de and Akkerman, R. (2013) Engineers in a flap over rotor blades. Flight International . 24 - 24. ISSN 0015-3710

Haanappel, S.P. (2013) Forming of UD fibre reinforced thermoplastics. thesis.

Demcenko, A. and Ravanan, M. and Visser, H.A. and Loendersloot, R. and Akkerman, R. (2013) Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurements. In: 2012 IEEE international ultrasonics symposium (IUS), Dresden, 7-10 October 2012, 07-10-2012 - 10-10-2012, Dresden (pp. 1909 - 1912).

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2013) Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels. In: The 11th International Conference on Numerical Methods in Forming Processes, NUMIFORM2013, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 175 - 182).

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Boer, A. de (2013) Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure. In: 9th International Workshop on Structural Health Monitoring, IWSHM 2013: A roadmap to intelligent structures, 10-12 September 2013, Lancaster, PA, USA (pp. 445 - 453).

Veijgen, N.K. and Masen, M.A. and Heide, E. van der (2013) Relating friction on the human skin to the hydration and temperature of the skin. Tribology letters, 49 (1). 251 - 262. ISSN 1023-8883

Veijgen, N.K. (2013) Skin friction: a novel approach to measuring in vivo human skin. thesis.

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Akkerman, R. (2013) Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of gamma-texture. Materials science & engineering A, 573 . 100 - 105. ISSN 0921-5093

Drukker, J.W. (2013) The Glorious Comeback of the Designer in Design History: David Raizman's History of Modern Design. Zhuangshi, 240 . 41 - 43. ISSN 0412-3662

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. (2013) The influence of austenite texture on the martensitic transformation of an austenitic stainless steel. Journal of alloys and compounds, 577S . 609 - 613. ISSN 0925-8388

2012

Petcu, I. and Agrawal, P.B. and Curteza, A. and Visser, H.A. and Brinks, G. and Teodorescu, M. (2012) A comparative study of heating elements used for the development of textile heaters. In: 12th AUTEX World Textile Conference, 13-15 June 2012, Zadar, Croatia.

Veijgen, N.K. and Masen, M.A. and Heide, E. van der (2012) A novel approach to measuring the frictional behaviour of human skin in vivo. Tribology international, 54 . 38 - 41. ISSN 0301-679X

Bijl-Brouwer, Mieke van der and Boess, Stella (2012) A shared vision on user experiences, on mics, merves, Madonna and more. In: 8th Design and Emotion Conference 2012, 11-14 September 2012, London, UK.

Yaqoob, M.A. (2012) Adhesion and friction in single asperity contact. thesis.

Jauregui-Becker, Juan and Franco-Garcia, Maria-Laura and Groen, Aard (2012) Centers of sustainable co-created products by BoP: Development inspired by social entrepreneurs. In: NYU Stern Conference on Social Entrepreneurship, 7-9 November 2012, New York.

Rodriguez Pareja, N.V. (2012) Contact and friction in systems with fibre reinforced elastomers. thesis.

Demcenko, A. and Tamosiunaite, M. and Vidugiriene, A. and Jakevicius, L. (2012) Estimation of lane marker parameters with high correlation to steering signal. IEEE transactions on intelligent transportation systems, 13 (2). 962 - 967. ISSN 1524-9050

Haanappel, S.P. and Sachs, U. and Thije, R.H.W. ten and Rietman, A.D. and Akkerman, R. (2012) Forming of Thermoplastic Composites. Key engineering materials, 504-506 . 237 - 242. ISSN 1013-9826

Rietman, A.D. and Haanappel, S.P. and Thije, R.H.W. ten and Akkerman, R. (2012) Forming simulation sensitivity study of the double-dome benchmark geometry. Key engineering materials, 504-506 . 301 - 306. ISSN 1013-9826

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Huetink, J. (2012) Free surface modeling of contacting solid metal flows employing the ALE formulation. In: ESAFORM 2012, Erlangen (pp. 431 - 436).

Balda Irurzun, U. and Dutschk, V. and Calvimontes, A. and Akkerman, R. (2012) Generation of micro-sized conductive lines on glass fibre fabrics by inkjet printing. Autex research journal (electronic), 12 (2). 55 - 61. ISSN 1470-9589

Valefi, M. and Pathiraj, B. and Rooij, M.B. de and Vries, E.G. de and Schipper, D.J. (2012) Influence of countersurface materials on dry sliding performance of CuO/Y-TZP composite at 600 °C. Journal of the European Ceramic Society, 32 (16). 4137 - 4147. ISSN 0955-2219

Drenth, E. and Bor, T.C. and Visser, H.A. and Wolters, M. (2012) Influence of the Level of Gelation on Physical Ageing Kinetics of uPVC Pipes. In: 15th International Conference on Deformation, Yield and Fracture of Polymers, 1-5 April 2012, Kerkrade, the Netherlands (pp. 194 - 197).

Jakevicius, L. and Vaiciukyniene, D. and Demcenko, A. (2012) Influence of ultrasonic radiation on the amorphous zeolite - Portland cement system. In: 4th International Conference on Radiation Interaction with Material and its Use in Technologies 2012, May 14-17, 2012 (pp. 550 - 553).

Palacios-Aguilera, N.B. and Bastemeijer, J. and Mollinger, J.R. and Bossche, A. and Mokkapati, V.R.S.S. and Visser, H.A. and Akkerman, R. (2012) Low-cost technology for the integration of micro- and nanochips into fluidic systems on printed circuit board: fabrication challenges. International journal on advances in systems and measurements, 5 (1-2). 11 - 21. ISSN 1942-261X

Dewo, P. and Houwen, E. B. van der and Sharma, P.K. and Magetsari, R. and Bor, T.C. and Vargas-Llona, L.D. and Horn, J.R. van and Busscher, H.J. and Verkerke, G.J. (2012) Mechanical properties of Indonesian-made narrow dynamic compression plate. Journal of the mechanical behavior of biomedical materials, 13 . 93 - 101. ISSN 1751-6161

Drenth, E. and Bor, T.C. and Visser, H.A. and Wolters, M. (2012) Non-destructive and in-situ determination of the degree of gelation of pvc pipes. In: Plastic pipes XVI, 24-26 September 2012, Barcelona, Spain (pp. 10 pp. - ).

Grouve, W.J.B. and Warnet, L. and Rietman, A.D. and Akkerman, R. (2012) On the weld strength of in situ tape placed reinforcements on weave reinforced structures. Composites Part A, Applied science and manufacturing, 43 (9). 1530 - 1536. ISSN 1359-835X

Haanappel, S.P. and Sachs, U. and Thije, R.H.W. ten and Rietman, A.D. and Akkerman, R. (2012) Shear Characterisation of UD Thermoplastic Composites. In: 11th International Conference on Flow Processing in Composite Materials (FPCM-11), Auckland, New Zealand.

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Simulation of Flexible Mechanisms in a Rotating Blade for Smart-Blade Applications. In: European Rotorcraft Forum, 4-7 September 2012, Amsterdam (pp. 1 - 8).

Heide, E. van der (2012) Skin tribology: science friction? [Lecture]

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Smart actuation for helicopter rotorblades. In: Smart actuation and sensing systems - Recent advances and future challenges. Intech open, 657 - 678. ISBN 9789535107989

Karsten, Frank and Basten, Rob (2012) Spare parts inventory pooling: how to share the benefits? [Report]

Bakker, A.J. den and Ma, X. and Werkhoven, R.W. and Rooij, M.B. de (2012) Surface Pick-up Formation: New Limits In The Limit Diagram. In: ET '12, Miami, Florida, USA.

Rooij, M.B. de and Ma, X. and Bakker, A.J. den and Werkhoven, R.J. (2012) Surface quality prediction in aluminum extrusion. Key engineering materials, 491 . 27 - 34. ISSN 1013-9826

Bonnema, G. Maarten and Veenvliet, Karel Th. and Broenink, Jan F. (2012) System design and engineering - lubricating multidisciplinary development projects. [Report]

Parada Puig, J.E. and Feng, X. and Hauerhof, E. and Suzuki, R. and Abubakar, U. (2012) The deep sea energy park: Harvesting hydrothermal energy for seabed exploration. In: LRET Collegium 2012 Book Series. University of Southamption, Southamption, UK. ISBN 9780854329519

Venner, C.H. and Zoelen, M.T. van and Lugt, P.M. (2012) Thin layer flow and film decay modeling for grease lubricated rolling bearings. Tribology international, 47 . 175 - 187. ISSN 0301-679X

Akkerman, R. and Rietman, A.D. and Haanappel, S.P. and Sachs, U. (2012) Towards Design for Thermoplastic Composites Manufacturing Using Process Simulation. In: ITHEC 2012, International Conference and Exhibition on Thermoplastic Composites, 29-30 October 2012, Bremen, Germany.

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2012) Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors. In: Sixth European Workshop on Structural Health Monitoring, 3-6 July 2012, Germany (pp. 232 - 239).

Valefi, M. (2012) Wear and friction of self-lubricating CuO-TZP composites. thesis.

Grouve, W.J.B. (2012) Weld strength of laser-assisted tape-placed thermoplastic composites. thesis.

2011

Thije, R.H.W. ten and Akkerman, R. and Ubbink, M.P. and Meer, L. van der (2011) A lubrication approach to friction in thermoplastic composites forming processes. Composites. Part A : Applied science and manufacturing, 42 (8). 950 - 960. ISSN 1359-835X

Qin, J. and Wu, Y. and Warnet, L.L. and Nijhuis, A. (2011) A novel numerical mechanical model for the stress–strain distribution in superconducting cable-in-conduit conductors. Superconductor Science and Technology, 24 (6). 065012. ISSN 0953-2048

Masen, M.A. (2011) A systems based experimental approach to tactile friction. Journal of the mechanical behavior of biomedical materials, 4 (8). pp. 1620-1626. ISSN 1751-6161

Qin, J. and Warnet, L.L. and Wu, Y. and Nijhuis, A. (2011) CORD, A Novel Numerical Mechanical Model for Nb3Sn CICCs. IEEE Transactions on Applied Superconductivity, 21 (3). pp. 2046-2049. ISSN 1051-8223

Woestenenk, Krijn and Bonnema, G. Maarten and Alvarez Cabrera, Andres A. and Tomiyama, Tetsuo (2011) Capturing Design Process Information in Complex Product Development. In: 31st Computers and Information in Engineering Conference, Parts A and B, 28-31 August 2011, Washington, DC (pp. pp. 1351-1360).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Quak, W. and Akkerman, R. and Huetink, J. (2011) Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Rietman, B. and Sachs, U. and Haanappel, S.P. and Akkerman, R. (2011) Complex stamp forming of advanced thermoplastic composites. In: ECCOMAS 2011.

Wits, W.W. and Jauregui Becker, J.M. and Vliet, F.E. van and Riele, G.J. te (2011) Developing an Integrated Design Strategy for Chip Layout Optimization. In: 21st CIRP Design Conference, March 27-29, 2011, Daejeon, South Korea (pp. pp. 55-62).

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2011) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: SMART'11, July 6-8, 2011, Saarbrucken, Germany (pp. 197 - 212).

Weidenaar, Taede and Hoekstra, S. and Wolters, Mannes (2011) Development options for the Dutch gas distribution grid in a changing gas market. In: 2011 IEEE International Conference on Networking, Sensing and Control (ICNSC), 11-13 , Delft (pp. p. 32).

Eggink, Wouter (2011) Disruptive images: stimulating creative solutions by visualizing the design vision. In: Design education for creativity and business innovation: 13th International Conference on Engineering and Product Design Education. Design Society, pp. 97-102. ISBN 9781904670339

Weidenaar, T.D. (2011) Dutch gas distribution grid goes green: decision support tool for local biogas utilization. In: International Gas Union Research Conference, IGCR, 19-21 October 2011, Seoul, Korea.

Boer, Jorrit Jozef de (2011) Een kleine en kwetsbare instelling : een geschiedenis van de Universiteit Twente, 1961-2011. thesis.

Bijl-Brouwer, Mieke van der (2011) Exploring design for dynamic use. In: The 13th International Conference on Engineering and Product Design Education, 8-9 September 2011, London (pp. pp. 535-540).

Wits, W.W. and Noël, F. and Masclet, C. (2011) Exploring the Potential of 3D Visualization Techniques for Usage in Collaborative Design. In: 21st CIRP Design Conference, March 27-29, 2011, Daejeon, South Korea (pp. pp. 187-193).

Ivanov, Dimitry S. and Ivanov, Sergey G. and Lomov, Stepan V. and Verpoest, Ignaas (2011) Finite element modelling of inter-ply delamination and intra-yarn cracking in textile laminates. In: SAMPE EUROPE 32nd International Technical Conference, SEICO 2011, 28-29 March 2011, Paris, France.

Sachs, Ulrich and Haanappel, Sebastiaan and Rietman, Bert and Akkerman, Remko (2011) Friction testing of thermoplastic composites. In: SEICO 11 – Paris: SAMPE Europe's 32nd International Technical Conference and Forum, 28-29 March 2011, Paris.

Valefi, Mahdiar and Rooij, Matthijn de and Schipper, Dirk J. and Winnubst, Louis (2011) High-Temperature Tribological and Self-Lubricating Behavior of Copper Oxide-Doped Y-TZP Composite Sliding Against Alumina. Journal of the American Ceramic Society, 94 (12). pp. 4426-4434. ISSN 0002-7820

Beukel, A.P. van den and Voort, M.C. van der (2011) Human-centered challenges and contributions for the implementation of automated driving. In: Proceedings of the Conference on Advanced Microsystems for Automotive Applications. Springer, pp. 225-235. ISBN 9783642213809

Haanappel, S.P. and Thije, R. ten and Sachs, U. and Rietman, A.D. and Akkerman, R. (2011) In-Plane Shear Characterisation of Uni-Directionally Reinforced Thermoplastic Melts. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. pp. 930-935).

Nijs, Jochem C. and Durmisevic, Elma and Halman, Johannes I.M. (2011) Interface design for open systems building. Open house international, 36 (1). pp. 35-43. ISSN 0168-2601

Dongen, Leo A.M. van (2011) Maintenance engineering: instandhouding van verbindingen. [Lecture]

Bosman, R. and Schipper, D.J. (2011) Mild Wear Prediction of Boundary-Lubricated Contacts. Tribology letters, 42 (2). pp. 169-178. ISSN 1023-8883

Bosman, Rob (2011) Mild wear modeling in the boundary lubrication regime. thesis.

Jauregui Becker, J.M. and Wits, W.W. and Houten, F.J.A.M. van (2011) Modeling the Structure and Complexity of Engineering Routine Design Problems. In: 21st CIRP Design Conference, March 27-29, 2011, Daejeon, South Korea (pp. pp. 159-166).

Thije, René ten and Haanappel, Sebastiaan (2011) Multi-layer thermoplastic composites manufacturing processes: simulations and experiments. In: SAMPE Europe International Conference & Forum, SEICO 2011, 28-30 March 2011, Paris, France.

Tauviqirrahman, M. and Ismail, R. and Schipper, D.J. and Jamari, J. (2011) Optimization of Partial Slip Surface at Lubricated-MEMS. In: Proceeding of 2011 2nd International Conference on Instrumentation, Control and Automation. IEEE, pp. 375-379. ISBN 9781457714603

Rietman, Bert and Haanappel, Sebastiaan and Sachs, Ulrich and Akkerman, Remko (2011) Process simulations for composites forming of UD tape laminate. In: 5th International CFK-Valley Stade Convention, 7-8 June 2011, Stade.

Eggink, Wouter (2011) Regels ter ontregeling : lessen uit de geschiedenis van het tegendraads ontwerp. thesis.

Bosman, R. and Hol, J. and Schipper, D.J. (2011) Running-in of metallic surfaces in the boundary lubrication regime. Wear, 271 (7-8). pp. 1134-1146. ISSN 0043-1648

Bosman, Rob and Schipper, Dirk Jan (2011) Running-in of systems protected by additive-rich oils. Tribology letters, 41 (1). pp. 263-282. ISSN 1023-8883

Waanders, Remko and Eggink, Wouter and Mulder-Nijkamp, Maaike (2011) Sketching is more than making correct drawings. In: Design education for creativity and business innovation: 13th International Conference on Engineering and Product Design Education. Design Society, pp. 299-304. ISBN 9781904670339

Wits, Wessel W. (2011) Smart integration of thermal management systems for electronics cooling. In: Smart systems integration, 22-23 March 2011, Dresden.

Ma, Xiao (2011) Surface quality of aluminium extrusion products. thesis.

Bonnema, G. Maarten (2011) The engineers’ innovation toolkit. Procedia Engineering, 9 . pp. 345-354. ISSN 1877-7058

Eggink, Wouter (2011) The rules of unruly product design. In: Proceedings of the 4th World Conference on Design Research. The International Association of Societies of Design Research (IASDR), 001-011.

Bosman, Rob and Schipper, Dirk Jan (2011) Transition from mild to severe wear including running in effects. Wear, 270 (7-8). pp. 472-478. ISSN 0043-1648

Mulder-Nijkamp, Maaike and Eggink, Wouter (2011) Understanding the 2.5th dimension: modelling the graphic language of products. In: 13th International Conference on Engineering and Product Design Education, EPDE 2011, 8-9 September 2011, London, UK.

Ivanov, S.G. and Anoshkin, A.N. and Zuyko, V. Yu. (2011) Viscoelastic behavior and durability of steel wire - reinforced polyethylene pipes under a high internal pressure. Mechanics of Composite Materials, 47 (2). pp. 193-202. ISSN 0191-5665

Bijl-Brouwer, Mieke van der and Boess, Stella and Harkema, Christelle (2011) What do we know about product use? A technique to share use-related knowledge in design teams. In: IASDR20111, 4th World conference on design research, October 31-November 4, 2011, Delft.

2010

Wits, Wessel W. (2010) 3D displays for design engineering (summary). In: Holo-pack•Holo-print 2010, 14-16 November 2010, Kuala Lumpur, Malaysia.

Song, Jiupeng and Valefi, Mahdiar and Rooij, Matthijn de and Schipper, Dirk J. (2010) A mechanical model for surface layer formation on self-lubricating ceramic composites. Wear, 268 (9-10). pp. 1072-1079. ISSN 0043-1648

Eggink, Wouter and Bijl-Brouwer, Mieke van der (2010) A multidisciplinary framework for (teaching) human product relations. In: Proceedings of the 12th international conference on engineering and product design education. Norwegian University of Science and Technology, pp. 266-271. ISBN 9781904670193

Tideman, Martijn and Voort, Mascha van der and Arem, Bart van (2010) A new scenario based approach for designing driver support systems applied to the design of a lane change support system. Transportation Research, Part C: Emerging technologies, 8 (2). pp. 247-258. ISSN 0968-090X

Nijkamp, Maaike and Garde, Julia A. (2010) A practical approach to translating social cultural patterns into new design. In: 12th International Conference on Engineering and Product Design Education, EPDE 2010, 2-3 September 2010, Trondheim, Norway.

Borches Juzgado, Pedro Daniel (2010) A3 architecture overviews : a tool for effective communication in product evolution. thesis.

Borches, P. Daniel and Bonnema, G. Maarten (2010) A3 architecture overviews : focusing architectural knowledge to support evolution of complex systems. In: 20th Annual International Symposium of INCOSE, July 12-15, 2010, Chicago, IL.

Eger, Arthur O. (2010) About the Resemblance between the Chinese Taotie and Works of Art from other Cultures, like Aztec, Maya, and Haida. Zhuang Shi Magazine, 52 (5). pp. 38-47.

Paternoster, Alexandre and Boer, André de and Loendersloot, Richard and Akkerman, Remko (2010) Actuators for smart applications. In: ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2010-3905, September 28 - October 1, 2010, Philadelphia, Pennsylvania.

Wits, Wessel W. and Riele, Gert Jan te (2010) Advances in Integrated Heat Pipe Technology for Printed Circuit Boards. In: 40th International Conference on Environmental Systems, 11-15 July 2010, Barcelona.

Beukel, Arie Paul van den and Voort, Mascha C. van der (2010) An assisted driver model. Towards developing driver assistance systems by allocating support dependent on driving situations. In: Proceedings of the Second Euopean Conference on Human Centered Design for Intelligent Transport Systems. HUMANIST Publications, pp. 175-188. ISBN 9782953171211

Masen, M.A. and Spijker, A. van 't and Kreulen, C.M. (2010) An experimental investigation into dental wear: Tooth-tooth contact. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of engineering tribology, 224 (6). pp. 589-594. ISSN 1350-6501

Sridhar, Ashok (2010) An inkjet printing-based process chain for conductive structures on printed circuit board materials. thesis.

Poelman, Wim and Junger, Marianne (2010) Anti Crime Design. Product, 3 . pp. 16-18. ISSN 0929-7081

Bonnema, G. Maarten and Borches, P. Daniel and Kauw-A-Tjoe, Rogier and Houten, Fred J.A.M. van (2010) Communication: Key Factor in Multidisciplinary System Design. In: 8th Conference on Systems Engineering Research, CSER, March 17-19, 2010, Hoboken, NJ, USA.

Lomov, S.V. and Koissin, V. and Karahan, M. and Godara, A. and Gorbatikh, L. and Verpoest, I. (2010) Compressibility of CNT-Grafted Fibrous Reinforcements: A Theory. International Journal of Material Forming, 3 (Suppl.). pp. 627-630. ISSN 1960-6206

Grouve, W.J.B. and Akkerman, R. (2010) Consolidation process model for film stacking glass/PPS laminates. Plastics, Rubber and Composites, 39 (3-5). pp. 208-215. ISSN 1465-8011

Haanappel, S.P. and Thije, R. ten and Akkerman, R. (2010) Constitutive modelling of UD reinforced thermoplastic laminates. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Ivanov, D.S. and Lomov, S.V. and Ivanov, S.G. and Verpoest, I. (2010) Damage in textile laminates of various inter-ply shift. In: 14th European Conference on Composite Materials, ECCM 2010, 7-10 June, 2010, Budapest, Hungary.

Bonnema, Maarten (2010) De autonome zwerfafval opruimrobot. Product, 18 (6). pp. 10-12. ISSN 0929-7081

Koissin, V. and Kotanjac, Z. and Lomov, S.V. and Gorbatikh, L. and Warnet, L. and Akkerman, R. (2010) Deformability of a Textile Reinforcement Modified with Nanofibres. In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France.

Loendersloot, Richard and Grouve, Wouter J.B. and Akkerman, Remko and Boer, André de (2010) Development of a multigrid finite difference solver for benchmark permeability analysis. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Bijl-Brouwer, Mieke van der and Eggink, Wouter (2010) Dynamics and diversity in use: implications for aesthetics and usability. In: When design education and design research meet :proceedings of the 12th international conference on engineering and product design education. The Design Society, pp. 230-235. ISBN 9781904670193

Koissin, Vitaly and Shipsha, Andrey and Skvortsov, Vitaly (2010) Effect of Physical Nonlinearity on Local Buckling in Sandwich Beams. Journal of Sandwich Structures & Materials, 12 (4). pp. 477-494. ISSN 1099-6362

Koissin, V. and Warnet, L. and Akkerman, R. (2010) Experimental characterization of fibre-reinforced composites improved with nanofibres or nanotubes. In: 14th International Conference on Experimental Mechanics, ICEM 2010, July 4-9, 2010, Poitiers, France.

Koissin, V and Klimshin, D.V. and Lomov, S.V. and Verpoest, I. (2010) FE modelling of a structurally stitched multilayer composite. In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France.

Thije, R.H.W. ten and Akkerman, R. (2010) Finite element simulations of laminated composites forming processes. International Journal of Material Forming, 3 (Suppl.). pp. 715-718. ISSN 1960-6206

Haanappel, S.P. and Thije, R. ten and Akkerman, R. (2010) Forming predictions of UD reinforced thermoplastic laminates. In: 14th European Conference on Composite Materials, ECCM 2010, 7-10 June, 2010, Budapest, Hungary.

Jakevicius, L. and Demcenko, A. and Mardosaite, R. and Strelciunaite, V. (2010) Frequency selection for air-coupled ultrasonic measurements in closed chambers. In: 3rd international conference on radiation interaction with material and its use in technologies 2010, September 20-23, 2010, Kaunas, Lithuania.

Akkerman, R. and Thije, R. ten and Sachs, U. and Rooij, M.B. de (2010) Friction in Textile Thermoplastic Composites Forming. In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France (pp. pp. 271-279).

Popovici, Radu Ionut (2010) Friction in wheel-rail contacts. thesis.

Cornelissen, B. and Warnet, L. and Akkerman, R. (2010) Friction measurements on carbon fibre tows. In: 14th International Conference on Experimental Mechanics (ICEM 14), July 4-9, 2010, Poitiers, France.

Wits, Wessel W. (2010) From fundamental principles to analysis methods (poster). In: Second Workshop on Complex Systems Architecting, 2010, University of Twente, Enschede.

Jauregui Becker, Juan Manuel (2010) From how much to how many : managing complexity in routine design automation. thesis.

Bijl-Brouwer, Mieke van der and Boess, Stella (2010) From remembering to envisioning product use: an informal design technique. In: Proceedings of the 7th Design and Emotion Conference 2010. IIT Institute of Design. ISBN 9780615406664

Wits, Wessel W. and Vaneker, Tom H.J. and Souchkov, Valeri (2010) Full Immersion TRIZ in Education. In: Triz Future Conference 2010 , 3-5 November 2010, Bergamo, Italy (pp. pp. 269-276).

Drukker, J.W. and Eger, Arthur O. and Velzen, Marjolein van (2010) Green roots: When and why design turned green. Pt. I. Zhuang shi, 209 (9). pp. 48-55. ISSN 0412-3662

Drukker, J.W. and Eger, Arthur O. and Velzen, Marjolein van (2010) Green roots: When and why design turned green. Pt. II. Zhuang shi, 210 (10). pp. 48-55. ISSN 0412-3662

Drukker, J.W. and Eger, Arthur O. and Velzen, Marjolein van (2010) Green roots: When and why design turned green. Pt. III. Zhuang shi, 211 (11). pp. 48-55. ISSN 0412-3662

Warnet, L. and Akkerman, R. and Ravensberg, M. (2010) High velocity impact on textile reinforced composites. In: 16th International Conference on Composite Materials, ICCM 2007, 8-13 July 2007, Kyoto, Japan.

Wits, Wessel W. and Sridhar, Ashok (2010) Inkjet printing of 3D metallic silver complex microstructures. In: International Conference on Competitive Manufacturing, COMA 2010, 3-5 February 2010, Cape Town, South Africa.

Bonnema, G. Maarten (2010) Insight, innovation, and the big picture in system design. Systems Engineering, 14 (3). pp. 223-238. ISSN 1098-1241

Visser, Hendrikus A. and Bor, Ton C. and Wolters, Mannes and Engels, Tom A.P. and Govaert, Leon E. (2010) Lifetime Assessment of Load-Bearing Polymer Glasses: An Analytical Framework for Ductile Failure. Macromolecular Materials and Engineering, 295 (7). pp. 637-651. ISSN 1438-7492

Visser, Hendrikus A. and Bor, Ton C. and Wolters, Mannes and Wismans, Joris G.F. and Govaert, Leon E. (2010) Lifetime Assessment of Load-Bearing Polymer Glasses: The Influence of Physical Ageing. Macromolecular Materials and Engineering, 295 (12). pp. 1066-1081. ISSN 1438-7492

Bor, T.C. and Warnet, L. and Akkerman, R. and Boer, A. de (2010) Modeling of Stress Development During Thermal Damage Healing in Fiber-reinforced Composite Materials Containing Embedded Shape Memory Alloy Wires. Journal of Composite Materials, 44 (22). 2547 - 2572. ISSN 0021-9983

Ma, X. and Rooij, M.B. de and Schipper, D.J. (2010) Modelling of contact and friction in aluminium extrusion. Tribology International, 43 (5-6). pp. 1138-1144. ISSN 0301-679X

Steenis, Niels Henning van (2010) Monitoring train performance in case of low adhesion; acquiring knowledge for the development of low adhesion measures. thesis.

Woestenenk, Krijn and Alvarez Cabrera, Andres A. and Tragter, Hans and Tomiyama, Tetsuo and Bonnema, G. Maarten (2010) Multi domain design: integration and reuse. In: 22nd International Conference on Design Theory and Methodology (DTM), 15-08-2010, Montreal, Canada (pp. pp. 519-528).

Lomov, Stepan V. and Beyers, Lesley and Gorbatikh, Larissa and Verpoest, Ignaas and Koissin, Vitaly and Kotanjac, Zeljko and Karahan, Mehmet (2010) Permeability and compressibility of CNT/CNF grafted reinforcements. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Visser, Hendrikus Antonius (2010) Residual lifetime assessment of UPVC gas pipes. thesis.

Soemantri, Satryo and Puja, Wiratmaja and Budiwantoro, Bagus and Parwata, Made and Schipper, D.J. (2010) Solution to Hertzian Contact Problem between Wheel and Rail for Small Radius of Curvature. Journal of Solid Mechanics and Materials Engineering, 4 (6). pp. 669-677. ISSN 1880-9871

Ivanov, Dimitry S. and Lomov, Stepan V. and Ivanov, Sergey G. and Verpoest, Ignaas (2010) Stress distribution in outer and inner plies of textile laminates and novel boundary conditions for unit cell analysis. Composites Part A: Applied Science and Manufacturing, 41 (4). pp. 571-580. ISSN 1359-835X

Salamon, David and Lammertink, Rob G.H. and Wessling, Matthias (2010) Surface texturing inside ceramic macro/micro channels. Journal of the European Ceramic Society, 30 (6). pp. 1345-1350. ISSN 0955-2219

Borches, P. Daniel and Bonnema, G. Maarten (2010) System Evolution Barriers and How to Overcome Them! In: 8th Conference on Systems Engineering Research, CSER, March 17-19, 2010, Hoboken, NJ, USA.

Wits, Wessel W. and Jauregui-Becker, Juan and Schotborgh, Wouter (2010) Systematic structuring of design knowledge (poster). In: Second Workshop on Complex Systems Architecting, 2010, University of Twente, Enschede.

Heijkoop, Cees van and Bonnema, Maarten (2010) Systems engineering zorgt voor beheersbaar ontwikkelen mechatronische systemen. Constructeur, 2010 (4). pp. 44-6. ISSN 0010-6658

Wits, Wessel W. and Vaneker, Tom H.J. (2010) TRIZ based Interface Conflict Resolving Strategies for Modular Product Architectures. In: Triz Future Conference 2010 , 3-5 November 2010, Bergamo, Italy (pp. pp. 37-42).

Eggink, Wouter (2010) The reinvention of the ready-made. In: Proceedings of the 7th Design and Emotion Conference 2010; Spertus Institute (Chicago, USA). Institute of Design, 001-012.

Grouve, W.J.B. and Warnet, L.L. and Akkerman, R. (2010) Towards a process simulation tool for the laseer assisted tape placement process. In: 14th European Conference on Composite Materials, ECCM 2010, June 7-10, 2010, Budapest, Hungary.

Alvarez Cabrera, A.A. and Foeken, M.J. and Tekin, O.A. and Woestenenk, K. and Erden, M.S. and De Schutter, B. and Tooren, M.J.L. and Babuska, R. and Houten, F.J.A.M. van and Tomiyama, T. (2010) Towards automation of control software: a review of challenges in mechatronic design. Mechatronics, 20 (8). pp. 876-886. ISSN 0957-4158

Cornelissen, Bo and Akkerman, Remko (2010) Towards modelling of the frictional behaviour of deforming fibrous tows: A
geometrical approach.
In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France.

Bosman, R. and Rooij, M.B. de (2010) Transient Thermal Effects and Heat Partition in Sliding Contacts. Journal of Tribology, 132 (2). 021401. ISSN 0742-4787

Jakevicius, L. and Demcenko, A. and Mardosaite, R. (2010) Ultrasound attenuation dependence on air compression or expansion processes. Ultragarsas, 65 (1). pp. 42-46. ISSN 1392-2114

Ooijevaar, T.H. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2010) Vibration based Structural Health Monitoring of a Composite Plate Structure with Multiple Stiffeners. In: Fifth European Workshop on Structural Health Monitoring, June 28 - July 4, 2010, Sorrento, Naples, Italy.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2010) Vibration based Structural Health Monitoring of a composite T-beam. Composite Structures, 92 (9). pp. 2007-2015. ISSN 0263-8223

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2010) Vibration based structural health monitoring of a composite plate with stiffeners. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium (pp. 909 - 924).

Grouve, W.J.B. and Warnet, L. and Akkerman, R. and Wijskamp, S. and Kok, J.S.M. (2010) Weld Strength Assessment for Tape Placement. International Journal of Material Forming, 3 (Suppl.). pp. 707-710. ISSN 1960-6206

2009

Eggink, Wouter (2009) A Chair to Look to the Moon: What We Can Learn from Irrational Design History for Contemporary Design Practice. Design Principles and Practices: an International Journal, 3 (1). pp. 103-114. ISSN 1833-1874

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) A comparative study of two conductive inkjet inks for fabrication of RF circuit structures. In: Large-area, Organic & Printed Electronics Convention, LOPE-C 2009, June 23-25, 2009, Frankfurt, Germany.

Grouve, W.J.B. and Akkerman, R. (2009) A consolidation process model for film stacking glass/PPS laminates. In: 17th International Conference on Composite Materials, ICCM 2009, 27-31 July 2009, Edinburgh, UK.

Thije, R.H.W. ten and Akkerman, R. (2009) A multi-layer triangular membrane finite element for the forming simulation of laminated composites. Composites Part A: Applied Science and Manufacturing, 40 (6-7). pp. 739-753. ISSN 1359-835X

Eggink, Wouter and Reinders, Angele and Meulen, Barend van der (2009) A practical approach to product design for future worlds using scenario-development. In: Creating a better world: proceedings of the 11th international conference on engineering and product design education. University of Brighton, pp. 538-543.

Eggink, Wouter (2009) A practical approach to teaching abstract product design issues. Journal of Engineering Design, 20 (5). pp. 511-521. ISSN 0954-4828

Paternoster, A.R.A. and Boer, A. de and Akkerman, R. (2009) Actuator review for smart rotor blades. [Report]

Miedema, J. and Voort, M.C. van der and Houten, F.J.A.M. van (2009) Advantageous application of Synthetic Environments in product design. CIRP Journal of Manufarcuring Science and Technology, 1 (3). pp. 159-164. ISSN 1755-5817

Visser, H.A. and Warnet, L.L. and Akkerman, R. (2009) An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipes. Engineering Fracture Mechanics, 76 (18). pp. 2698-2710. ISSN 0013-7944

Cornelissen, B. and Akkerman, R. (2009) Analysis of yarn bending behaviour. In: ICCM-17 17th International Conference on Composite Materials, 27 Jul 2009 - 31 Jul 2009, Edinburgh.

Koopman, Albertus Johannes (2009) Analysis tools for the design of aluminium extrusion dies. thesis.

Drukker, J.W. and Velzen, Marjolein van (2009) Anti-technological avant-garde design in th 19th and late 20th centurey: Arts and crafts and Dutch postmodernism. Part I. Zhuang shi, 196 (8). pp. 50-59. ISSN 0412-3662

Drukker, J.W. and Velzen, Marjolein van (2009) Anti-technological avant-garde design in th 19th and late 20th centurey: Arts and crafts and Dutch postmodernism. Part II. Zhuang shi, 197 (9). pp. 54-63. ISSN 0412-3662

Durmisevic, Elma (2009) Bouwen van de toekomst. ConcepTueel, 18 (1). pp. 14-16.

Ouwerkerk, Gijs van (2009) CAD implementation of design rules for aluminium extrusion dies. thesis.

Harrison, P. and Thije, René ten and Akkerman, Remko and Long, Andrew C. (2009) Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. In: NATO Advanced Research Workshop: Textile Composites, May 18-22, 2009, Kiev, Ukraine.

Koissin, Vitaly and Shipsha, Andrey and Skvortsov, Vitaly (2009) Compression strength of sandwich panels with sub-interface damage in the foam core. Composites Science and Technology, 69 (13). pp. 2231-2240. ISSN 0266-3538

Borches, P. Daniel and Bonnema, G. Maarten (2009) Coping with System Evolution - Experiences in Reverse Architecting as a Means to Ease the Evolution of Complex Systems. In: 19th Annual International Symposium INCOSE: East Meets West: the human dimension to systems engineering, 20-23 July 2009, Singapore, Thailand.

Tomiyama, T. and Gul, P. and Jin, Y. and Lutters, D. and Kind, Ch. and Kimura, F. (2009) Design methodologies: Industrial and educational applications. CIRP Annals, 58 (2). pp. 543-565. ISSN 0007-8506

Thije, R.H.W. ten and Akkerman, R. (2009) Design of an experimental setup to measure tool-ply and ply-ply friction in thermoplastic laminates. International Journal of Material Forming, 2 (Suppl.). pp. 197-200. ISSN 1960-6206

Reinders, A.H.M.E. and Wit, H. de and Boer, A. de (2009) Design of fibre reinforced PV concepts for building integrated applications. In: 24th EU PVSEC, 21-25 September 2009, Hamburg (pp. pp. 3940-3944).

Reinders, Angele and Boer, André de and Winter, Arjan de and Haverlag, Marco (2009) Designing PV powered LED products - integration of PV technology in innovative products. In: 24th EU PVSEC, 21-25 September 2009, Hamburg (pp. pp. 3179-3183).

Ran, Shen and Winnubst, Louis and Blank, Dave H.A. and Pasaribu, Henry R. and Sloetjes, Jan-Willem and Schipper, Dik J. (2009) Dry-sliding self-lubricating ceramics: CuO doped 3Y-TZP. Wear, 267 (9-10). pp. 1696-1701. ISSN 0043-1648

Dubey, Swapnil and Solanki, S.C. and Tiwari, Arvind (2009) Energy and exergy analysis of PV/T air collectors connected in series. Energy and Buildings, 41 (8). pp. 863-870. ISSN 0378-7788

Beukel, A.P. van den and Voort, M.C. van der (2009) Evaluation of ADAS with a supported-driver model for desired allocation of tasks between human and technology performance. In: Advanced Microsystems for Automotive Applications 2009, Springer-Verlag Berlin, pp. 187-208, 2009. Springer, pp. 187-208. ISBN 9783642007446

Ma, Xiao and Matthews, Allan (2009) Evaluation of abradable seal coating mechanical properties. Wear, 267 (9-10). pp. 1501-1510. ISSN 0043-1648

Sidin, Ryan S.R. and Hagmeijer, Rob and Sachs, Ulrich (2009) Evaluation of master equations for the droplet size distribution in condensing flow. Physics of fluids, 21 (7). 073303. ISSN 1070-6631

Eger, Arthur O. (2009) Evolutionary Product Development. Zhuang Shi Magazine, 51 (2). pp. 56-63.

Eger, Arthur O. (2009) Evolutionary Product Development in Working-Class Housing. In: Comparative methodologies: the world into culture, Liber amicorum Richard Foque. UPA Editions . University Press Antwerp, Antwerp, pp. 298-317. ISBN 9789054876304

Tiwari, Arvind and Dubey, Swapnil and Sandhu, G.S. and Sodha, M.S. and Anwar, S.I. (2009) Exergy analysis of integrated photovoltaic thermal solar water heater under constant flow rate and constant collection temperature modes. Applied Energy, 86 (12). pp. 2592-2597. ISSN 0306-2619

Entrop, A.G. and Brouwers, H.J.H. and Reinders, A.H.M.E. and Müthing, F. (2009) Experimental research on the use of phase change materials to come to passive solar energy concepts. In: The 3rd CIB International Conference on Smart and Sustainable Built Environments (SASBE2009), June 15-19, 2009, Delft.

Sridhar, A. and Perik, M.A. and Reiding, J. and Dijk, D.J. van and Akkerman, R. (2009) Fabrication of RF Circuit Structures on a PCB Material Using Inkjet Printing-Electroless Plating and the Substrate Preparation Therefor. Transactions of The Japan Institute of Electronics Packaging, 2 (1). pp. 116-124. ISSN 1883-3365

Solanki, S.C. and Dubey, Swapnil and Tiwari, Arvind (2009) Indoor simulation and testing of photovoltaic thermal (PV/T) air collectors. Applied Energy, 86 (11). pp. 2421-2428. ISSN 0306-2619

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) Inkjet printing and adhesion characterisation of conductive tracks on a commercial printed circuit board material. Thin Solid Films, 517 (16). pp. 4633-4637. ISSN 0040-6090

Sridhar, A. and Reiding, J. and Adelaar, H. and Achterhoek, F. and Dijk, D.J. van and Akkerman, R. (2009) Inkjet-printing- and electroless-plating- based fabrication of RF circuit structures on high-frequency substrates. Journal of Micromechanics and Microengineering, 19 (8). 085020. ISSN 0960-1317

Schotborgh, Wouter Olivier (2009) Knowledge engineering for design automation. thesis.

Akkerman, Remko and Thije, René ten (2009) Models for Textile Composites Forming. In: NATO Advanced Research Workshop: Textile Composites, May 18-22, 2009, Kiev, Ukraine.

Grouve, W.J.B. and Akkerman, R. (2009) Multi-scale effects in the consolidation of thermoplastic laminates. International Journal of Material Forming, 2 (Suppl.). pp. 157-160. ISSN 1960-6206

Wits, W.W. and Vaneker, T.H.J. and Mannak, J.H. and Legtenberg, R. (2009) Novel cooling strategy for electronic packages: Directly injected cooling. CIRP Journal of Manufarcuring Science and Technology, 1 (3). pp. 142-147. ISSN 1755-5817

Jong, M. de and Reinders, A.H.M.E. and Kok, J.B.W. and Westendorp, G. (2009) Optimizing a steam-methane reformer for hydrogen production. International Journal of Hydrogen Energy, 34 (1). pp. 285-292. ISSN 0360-3199

Bijl-Brouwer, Mieke van der and Voort, Mascha C. van der (2009) Participatory Scenario Generation: Communicating Usability Issues in Product Design through User Involvement in Scenario Generation. Design Principles and Practices: an International Journal, 3 (1). pp. 269-288. ISSN 1833-1874

Paternoster, A.R.A. and Boer, A. de and Akkerman, R. (2009) Piezo-Actuators for Gurney flap concept. [Report]

Paternoster, A.R.A. and Boer, A. de and Akkerman, R. (2009) Piezo-Actuators for Synthetic-Jets. [Report]

Houten, Fred J.A.M. van (2009) Preface. CIRP Journal of Manufarcuring Science and Technology, 1 (3). p. 119. ISSN 1755-5817

Carvelli, V. and Koissin, V. and Kustermans, J. and Lomov, S.V. and Tomaselli, V.N. and Van Den Broucke, B. and Verpoest, I. and Witzel, V. (2009) Progressive damage in stitched composites: Static tensile tests and tension-tension fatigue. In: 17th International Conference on Composite Materials, ICCM 17, 2009, 27-31 July 2009, Edinburgh, UK.

Koissin, Vitaly and Shipsha, Andrey (2009) Residual In-plane Mechanical Properties of Transversely Crushed Structural Foams. Journal of Sandwich Structures & Materials, 11 (2-3). pp. 199-211. ISSN 1099-6362

Ivanov, Dimitry and Ivanov, Sergey and Lomov, Stepan and Verpoest, Ignaas (2009) Strain mapping analysis of textile composites. Optics and Lasers in Engineering, 47 (3-4). pp. 360-370. ISSN 0143-8166

Bijl-Brouwer, Mieke van der and Voort, Mascha van der (2009) Strategies to design for dynamic usability. In: Proceedings of IASDR2009 Design Rigor & Relevance. Korea Society of Design Science, pp. 245-254. ISBN 9788996319405

Koissin, V. and Kustermans, J. and Lomov, S.V. and Verpoest, I. and Van Den Broucke, B. and Witzel, V. (2009) Structurally stitched NCF preforms: Quasi-static response. Composites Science and Technology, 69 (15-16). pp. 2701-2710. ISSN 0266-3538

Koissin, V. and Kustermans, J. and Lomov, S.V. and Verpoest, I. and Nakai, H. and Kurashiki, T. and Hamada, K. and Momoji, Y. and Zako, M. (2009) Structurally stitched woven preforms: experimental characterisation, geometrical modelling, and FE analysis. Plastics, Rubber and Composites, 38 (2-4). pp. 98-105. ISSN 1465-8011

Jauregui Becker, J.M. and Tragter, H. and Houten, F.J.A.M. van (2009) Structure and models of artifactual routine design problems for computational synthesis. CIRP Journal of Manufarcuring Science and Technology, 1 (3). pp. 120-125. ISSN 1755-5817

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) Surface Modification of a PCB Substrate for Better Adhesion of Inkjet Printed Circuit Structures. In: 3rd International Student Conference on Print and Media Technology, Printing Future Days 2009, November 2-5, 2009, Chemnitz, Germany (pp. pp. 363-368).

Preez, N. du and Lutters, D. and Nieberding, H. (2009) Tailoring the development process according to the context of the project. CIRP Journal of Manufarcuring Science and Technology, 1 (3). pp. 191-198. ISSN 1755-5817

Visser, Roy and Bor, Ton and Wolters, Mannes and Govaert, Leon E. (2009) The influence of physical ageing on yielding and failure of unplasticised poly(vinyl chloride) pipes. In: 14th International Conference on Deformation Yield and Fracture of Polymers, 6-9 April 2009, Rolduc, Kerkrade.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: 15th International Conference on Composite Structures, ICCS, 15-17 June 2009, Porto, Portugal.

Loendersloot, Richard and Ooijevaar, Ted and Warnet, Laurent and Akkerman, Remko and Boer, André de (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: Integrity Failure and Reliability - 3, 20-24 July 2009, Porto, Portugal.

2008

Schotborgh, W.O. and Kokkeler, F.G.M. and Tragter, H. and Bomhoff, M.J. and Houten, F.J.A.M. van (2008) A Generic Synthesis Algorithm for Well-Defined Parametric Design. In: 18th CIRP Design Conference, 7-9 April 2008, Enschede, Netherlands.

Tideman, M. and Voort, M.C. van der and Arem, B. van (2008) A New User Centered Approach to the Design of Driver Support Systems. In: 2008 IEEE Intelligent Vehicles Symposium. IEEE, pp. 648-653. ISBN 9781424425686

Visser, H.A. and Wolters, M. and Bor, T.C. and Engels, T.A.P. and Govaert, L.E. (2008) A new engineering approach to predict the long-term hydrostatic strength of unplasticized poly(vinyl chloride) pipes. In: 10th International PVC Conference, 22-24 April 2008, Brighton, UK (pp. pp. 377-387).

Eggink, Wouter (2008) A practical approach to product design from a philosophical perspective. In: Proceedings of the 10th international conference on engineering and product design education. Universitat Polytecnica de Catalunya, pp. 25-30. ISBN 9781904670049

Eger, Arthur O. (2008) Adding value by design. Plastics Innovations, 2 (1). pp. 24-33. ISSN 1876-8369

Grouve, Wouter J.B. and Akkerman, Remko (2008) An idealised BC for the meso scale analysis of textile impregnation. In: 9th International Conference on Flow Processes in Composite Materials, FPCM 2008, 8-10 July 2008, Montreal, Canada.

Wang, Huaxin and Meijer, Frank and Miedema, Jan and Broek, Egon L. van den and Voort, Mascha van der and Vergeest, Joris S.M. (2008) Applicability of synthetic environments for product design. In: 7th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME 2008, 8-10 October 2008, Beijing, China (pp. P56).

Cao, J. and Akkerman, R. and Boisse, P. and Chen, J. and Cheng, H.S. and Graaf, E.F. de and Gorczyca, J.L. and Harrison, P. (2008) Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results. Composites Part A: Applied Science and Manufacturing, 39 (6). pp. 1037-1053. ISSN 1359-835X

Anggreeni, I. and Voort, M.C. van der (2008) Classifying Scenarios in a Product Design Process: a study towards semi-automated scenario generation. In: 18th CIRP Design Conference 2008, April 7-9, 2008 , Enschede, Netherlands.

Grouve, W.J.B. and Warnet, L. and Boer, A. de and Akkerman, R. and Vlekken, J. (2008) Delamination detection with fibre Bragg gratings based on dynamic behaviour. Composites Science and Technology, 68 (12). pp. 2418-2424. ISSN 0266-3538

Bonnema, G. Maarten and Borches, P. Daniel (2008) Design with overview - how to survive in complex organisations. In: 18th Annual International Symposium of INCOSE: Systems Engineering for the Planet, 15-19 June 2008, Utrecht, the Netherlands.

Bijl-Brouwer, Mieke van der and Voort, Mascha C. van der (2008) Designing for Dynamic Usability: Development of a Design Method that Supports Designing Products for Dynamic Use Situations. Design Principles and Practices: an International Journal, 2 (1). pp. 149-158. ISSN 1833-1874

Jamari, J. and Schipper, D.J. (2008) Deterministic repeated contact of rough surfaces. Wear, 264 (3-4). pp. 349-358. ISSN 0043-1648

Streppel, A.H. and Klingenberg, W. and Singh, U.P. (2008) Editorial: Advances in sheet metal forming applications. International Journal of Machine Tools and Manufacture, 48 (5). pp. 483-484. ISSN 0890-6955

Visser, H.A. and Hermkens, R.M.J. and Wolters, M. and Weller, J. and Warnet, L.L. (2008) Excellent impact performance of PVC pipeline materials in gas distribution networks after many years of service. In: International Gas Union Research Conference, IGCR, 8-10 October 2008, Paris, France.

Entrop, A.G. and Brouwers, H.J.H. and Reinders, A.H.M.E. (2008) Field experiments on the use of phase changing materials, insulation materials and passive solar radiation in the built environment. In: World Sustainable Builing Conference, September 21-25, 2008, Melbourne, Australia (pp. pp. 102-109).

Lutters, D. and Klooster, R. ten (2008) Functional requirement specification in the packaging development chain. CIRP Annals, 57 (1). pp. 145-148. ISSN 0007-8506

Bonnema, Gerrit Maarten (2008) Funkey architecting : an integrated approach to system architecting using functions, key drivers and system budgets. thesis.

Vaneker, T.H.J. and Koenis, P.T.G. and Ouwerkerk, G. van and Nilsen, K.E. and Houten, F.J.A.M. van (2008) Integrated bottom up and top down approach to optimization of the extrusion process. CIRP annals, 57 (1). pp. 183-186. ISSN 0007-8506

Wits, Wessel Willems (2008) Integrated cooling concepts for printed circuit boards. thesis.

Drukker, J.W. (2008) Knel in het model: Commentaar op Frankema & Smits en Touwen. Tijdschrift voor sociale en economische geschiedenis, 5 (2). pp. 151-159. ISSN 1572-1701

Tocha, Ewa and Pasaribu, Henry R. and Schipper, Dik J. and Schönherr, Holger and Vancso, G. Julius (2008) Low Friction in CuO-Doped Yttria-Stabilized Tetragonal Zirconia Ceramics: A Complementary Macro- and Nanotribology Study. Journal of the American Ceramic Society, 91 (5). pp. 1646-1652. ISSN 0002-7820

Grouve, W.J.B. and Akkerman, R. and Loendersloot, R. and Berg, S. van den (2008) Multi-scale effects in the consolidation of thermoplastic laminates. International Journal of Material Forming, 1 (Suppl.). pp. 859-862. ISSN 1960-6206

Haanappel, S.P. and Akkerman, R. (2008) Non-crimp fabric permeability modelling. In: 9th International Conference on Flow Processes in Composite Materials, FPCM, 8-10 July 2008, Montreal, Canada.

Wits, W.W. and Brok, G.J.H.M. and Mannak, J.H. and Legtenberg, R. (2008) Novel Cooling Strategy for Electronic Packages: Directly Injected Cooling. In: 18th CIRP Design Conference 2008, April 7-9, 2008 , Enschede, Netherlands.

Borches, P. Daniel and Bonnema, G. Maarten (2008) On the origin of evolvable systems : evolvability or extinction. In: International Symposium on Tools and Methods for Concurrent Engineering, TMCE 2008, 21-25 April 2008, Izmir, Turkey.

Hermkens, Rene and Wolters, Mannes and Weller, Jeroen and Visser, Roy (2008) PVC pipes in gas distribution: still going strong! In: Plastic Pipes XIV, 22-24 September 2008, Budapest, Hungary.

Loendersloot, R. and Grouve, W.J.B. and Akkerman, R. and Berg, S. van den (2008) Permeability prediction using a multigrid method. In: 9th International Conference on Flow Processes in Composite Materials, FPCM-9 2008, 8-10 July 2008, Montreal, Canada.

Jauregui-Becker, Juan M. and Wits, Wessel W. and Houten, Fred J.A.M. van (2008) Reducing design complexity of multidisciplinary domain integrated products: a case study. In: Manufacturing Systems and Technologies for the New Frontier. Springer, London, pp. 149-154. ISBN 9781848002661

Koissin, Vitaly and Shipsha, Andrey (2008) Residual dent in locally loaded foam core sandwich structures – Analysis and use for NDI. Composite Structures, 68 (1). pp. 57-74. ISSN 0263-8223

Thije, R.H.W. ten and Akkerman, R. (2008) Solutions to intra-ply shear locking in finite element analyses of fibre reinforced materials. Composites Part A: Applied Science and Manufacturing, 39 (7). pp. 1167-1176. ISSN 1359-835X

Preez, N. du and Lutters, D. and Nieberding, H. (2008) Tailoring the Development Process According to the Context of the Project. In: 18th CIRP Design Conference 2008, April 7-9, 2008 , Enschede, Netherlands.

Bonnema, G. Maarten (2008) The engineers’ innovation toolkit. In: TRIZ-Future Conference '08 Synthesis of innovation, 5-7 November 2008, Enschede.

Lingbeek, R.A. and Meinders, T. and Rietman, A. (2008) Tool And Blank Interaction In The Cross-Die Forming Process. International Journal of Material Forming, 1 (Suppl.). pp. 161-164. ISSN 1960-6206

Thije, R.H.W. ten and Akkerman, R. and Meer, L. van der and Ubbink, M.P. (2008) Tool-ply friction in thermoplastic composite forming. International Journal of Material Forming, 1 (Suppl.). pp. 953-956. ISSN 1960-6206

Grouve, W.J.B. and Akkerman, R. and Loendersloot, R. and Berg, S. van den (2008) Transverse permeability of woven fabrics. In: 11th ESAFORM Conference on Material Forming 2008, April 23-25, 2008, Lyon, France.

Borches, P.D. and Bonnema, G.M. (2008) ‘Living’ Architecture Overviews - Supporting the Design of Complex Systems. In: CIRP Design Conference 2008: Design Synthesis, April 7-9, 2008, Enschede, the Netherlands.

2007

Tideman, M. and Voort, M.C. van der and Arem, B. van and Tillema, F. (2007) A Review of Lateral Driver Support Systems. In: IEEE Intelligent Transportation Systems Conference, ITSC 2007. IEEE, pp. 992-999. ISBN 9781424413966

Reinders, A.H.M.E. (2007) A design method to assess the accessibility of light on PV cells in an arbitrary geometry by means of ambient occlusion. In: 22nd European Photovoltaic Solar Energy Conference and Exhibition, September 3-7, 2007, Milan, Italy.

Visser, H.A. and Engels, T.A.P. and Govaert, L.E. and Bor, T.C. (2007) A new engineering approach to predict the hydrostatic strength of uPVC
pipes.
In: PPS E/A, 2007, Göteborg, Sweden.

Smulders, Frido E. and Broek, Egon L. van den and Voort, Mascha C. van der (2007) A socio-interactive framework for the fuzzy front end. In: 14th International Product Development Management Conference, June 10-12., Porto, Portugal (pp. pp. 1439-1450).

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2007) Adhesion Characterisation of Inkjet Printed Silver Tracks. In: 2nd International Student Conference on Print and Media Technology, Printing Future Days 2007, November 5-8, 2007, Chemnitz, Germany (pp. pp. 209-210).

Akkerman, Remko and Villa Rodriguez, Lasimir Hadir (2007) Braiding Simulation and Slip Evaluation for Arbitrary Mandrels. In: 10th International ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain.

Tasan, Y.C. and Rooij, M.B. de and Schipper, D.J. (2007) Changes in the micro-geometry of a rolling contact. Tribology International, 40 (4). pp. 672-679. ISSN 0301-679X

Jamari, J. and Schipper, D.J. (2007) Closure to “Discussion of `Experimental Investigation of Fully Plastic Contact of a Sphere Against a Hard Flat' ” (2007, ASME J. Tribol., 129, p. 700). Journal of Tribology, 129 (3). p. 701. ISSN 0742-4787

Boisse, Philippe and Akkerman, Remko and Cao, Jian and Chen, Julie and Lomov, Stepan and Long, Andrew (2007) Composites Forming. In: Advances in Material Forming : Esaform 10 years on. Springer, pp. 61-79. ISBN 9782287721427

Akkerman, R. and Lamers, E.A.D. (2007) Constitutive modelling. In: Composites forming technologies. CRC Press, Boca Raton, FL. ISBN 9781845690335

Moodij, E. and Rooij, M.B. de and Schipper, D.J. (2007) Contact model for hydrostatic extrusion of magnesium. In: International Conference on Tribology in Manufacturing Processes, ICTMP 2007, 24-26 September 2007, Yokohama, Japan (pp. pp. 79-84).

Jamari, J. and Schipper, D.J. (2007) Criterion for surface contact deformation of metals. Tribotest, 13 (1). pp. 1-11. ISSN 1354-4063

Jamari, J. and Schipper, D.J. (2007) Deformation due to contact between a rough surface and a smooth ball. Wear, 262 (1-2). pp. 138-145. ISSN 0043-1648

Brouwer, Mieke van der (2007) Design for dynamic use situations: development of a design method that supports designers in dealing with dynamic usability (poster). In: PhD Day Delft, October 2007, Delft.

Ran, Shen and Winnubst, Louis and Blank, Dave H.A. and Pasaribu, Henry R. and Sloetjes, Jan-Willem and Schipper, Dik J. (2007) Effect of Microstructure on the Tribological and Mechanical Properties of CuO-Doped 3Y-TZP Ceramics. Journal of the American Ceramic Society, 90 (9). pp. 2747-2752. ISSN 0002-7820

Entrop, A.G. and Reinders, A.H.M.E. and Brouwers, H.J.H. (2007) Evaluation of financial aspects and energy performance indicators of residential real estate in the Netherlands. In: 2nd International Congress on Environmental Planning and Management; Visions – Implementations - Results, 5-10 August 2007, Berlin (pp. pp. 513-516).

Thije, René Hermanus Willem ten (2007) Finite element simulations of laminated composite forming processes. thesis.

Kessels, Josef F.A. and Jonker, Attie S. and Akkerman, Remko (2007) Fully 2 1/2D flow modeling of resin infusion under flexible tooling using unstructured meshes and wet and dry compaction properties. Composites Part A: Applied Science and Manufacturing, 38 (1). pp. 51-60. ISSN 1359-835X

Reinders, Angele and Gooijer, Henry de and Diehl, Jan Carel (2007) How participatory product design and micro-entrepreneurship favor the dissemination of photovoltaic systems in Cambodia. In: 17th International Photovoltaic Science and Engineering Conference, 3-7 December 2007, Fukuoka, Japan.

Koissin, Vitaly and Lomov, Stepan V. and Verpoest, Ignaas (2007) Internal geometry of structurally stitched NCF preforms. In: 16th International Conference on Composite Materials, ICCM 2007, 8-13 July 2007, Kyoto, Japan.

Thije, R.H.W. ten and Akkerman, R. (2007) Intra-ply shear locking. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 1017-1022).

Thije, R.H.W. ten and Akkerman, R. and Huetink, J. (2007) Large deformation simulation of anisotropic material using an updated Lagrangian finite element method. Computer Methods in Applied Mechanics and Engineering, 196 (33-34). pp. 3141-3150. ISSN 0045-7825

Koissin, V. and Lomov, S.V. and Verpoest, I. (2007) Meso-scale FE modelling of structurally stitched preform. In: Micro-symposium "Finite Element Modeling of Textiles and Textile Composites", 26-28 September 2007, Saint-Petersburg, Russia.

Deladi, E.L. and Rooij, M.B. de and Schipper, D.J. (2007) Modelling of static friction in rubber–metal contact. Tribology International, 40 (4). pp. 588-594. ISSN 0301-679X

Van Den Broucke, Bjorn and Drechsler, Klaus and Hanisch, Vera and Hartung, Daniel and Ivanov, Dimitry S. and Koissin, Vitaly E. and Lomov, Stepan V. and Middendorf, Peter (2007) Multilevel modelling of mechanical properties of textile composites: ITOOL Project. In: 28th Society for the Advancement of Materials and Process Engineering Europe International Conference, SEICO 2007, April 2-4, 2007, Paris, France.

Kessels, Josef F.A. and Jonker, Attie S. and Akkerman, Remko (2007) Optimising the flow pipe arrangement for resin infusion under flexible tooling. Composites Part A: Applied Science and Manufacturing, 38 (9). pp. 2076-2085. ISSN 1359-835X

Jamari, J. and Rooij, M.B. de and Schipper, D.J. (2007) Plastic Deterministic Contact of Rough Surfaces. Journal of Tribology, 129 (4). pp. 957-962. ISSN 0742-4787

Jamari, J. and Schipper, D.J. (2007) Plastic deformation and contact area of an elastic–plastic contact of ellipsoid bodies after unloading. Tribology International, 40 (8). pp. 1311-1318. ISSN 0301-679X

Berg, Hans van den and Mandjes, Michel and Núñez-Queija, Rudesindo (2007) Pricing and distributed QoS control for elastic network traffic. Operations Research Letters, 35 (3). pp. 297-307. ISSN 0167-6377

Masen, M.A. and Rooij, M.B. de and Schipper, D.J. and Adachi, K. and Kato, K. (2007) Single asperity abrasion of coated nodular cast iron. Tribology International, 40 (2). pp. 170-179. ISSN 0301-679X

Koissin, Vitaly and Skvortsov, Vitaly and Shipsha, Andrey (2007) Stability of the face layer of sandwich beams with sub-interface damage in the foam core. Composite Structures, 78 (4). pp. 507-518. ISSN 0263-8223

Faraon, I.C. and Schipper, D.J. (2007) Stribeck Curve for Starved Line Contacts. Journal of Tribology, 129 (1). pp. 181-187. ISSN 0742-4787

Miedema, Jan and Meijer, Frank and Wang, Huaxin and Voort, Mascha C. van der and Broek, Egon L. van den and Vergeest, Joris S.M. (2007) Synthetic environments as design tool - a case study. In: 4th International INTUITION Conference "Virtual Reality and Virtual Environments", October 4-5, 2007, Athens, Greece (pp. pp. 239-240).

Klooster, Roland ten (2007) Verpakking buitenstebinnen. [Lecture]

2006

Loendersloot, R. and Akkerman, R. (2006) A permeability prediction for non-crimp fabrics. In: ESAFORM 2006, 26-28 April 2006, Strathclyde, Glasgow.

Loendersloot, R. and Akkerman, R. (2006) A permeability prediction for non-crimp fabrics. In: The 8th International Conference on Flow Processes in Composite Materials (FPCM8, 11-13 July 2006, Douai, France.

Deladi, E.L. and Rooij, M.B. de and Vries, E.G de and Schipper, D.J. (2006) Analytical and experimental investigation of the static friction regime for rubber-rigid ball contact. Surface and Interface Analysis, 38 (4). pp. 891-893. ISSN 0142-2421

Akkerman, R. and Villa Rodriguez, B.H. (2006) Braiding simulation for RTM preforms. In: 8th International Conference on Textile Composites, TexComp 2006, 16-18 October, 2006, Nottingham, UK.

Loendersloot, R. and Lomov, S.V. and Akkerman, R. and Verpoest, I. (2006) Carbon composites based on multiaxial multiply stitched preforms. Part V: geometry of sheared biaxial fabrics. Composites Part A: Applied Science and Manufacturing, 37 (1). pp. 103-113. ISSN 1359-835X

Reinders, Angele (2006) Concept generation of PV products in a future scenario [Powerpoint Presentation]. In: World Climate & Energy Event, RIO6, 17-18 November 2006, Rio de Janeiro, Brazil.

Warnet, L. and Hulskamp, A.W. and Akkerman, R. (2006) Damage development around moulded-in holes in flat braided composites. In: 8th International Conference on Textile Composites, TexComp 2006, 16-18 October, 2006, Nottingham, UK.

Eger, Arthur O. (2006) De Nederlandse Designprijzen. Produkt, 14 (6). p. 7. ISSN 0929-7081

Koissin, Vitaly and Shipsha, Andrey (2006) Deformation of Foam Cores in Uniaxial Compression-Tension Cycle. Journal of Sandwich Structures & Materials, 8 (5). pp. 395-406. ISSN 1099-6362

Brouwer, Mieke van der (2006) Design for dynamic use situations, first steps in the development of a design method that supports designing for dynamic use situations. In: Design Research Society International Conference "Wonderground", 31 October - 4 November 2006, Lissabon.

Eger, Arthur O. (2006) Designprijzen: de meest bekroonden. Produkt, 14 (1). pp. 13-14. ISSN 0929-7081

Reinders, A.H.M.E. and Meulen, B.J.R. van der and Eger, A.O. (2006) Development of PV powered consumer products using future scenarios. In: 21th European Photovoltaic Solar Energy Conference and Exhibition, September 4-8, 2006, Dresden, Germany.

Eger, Arthur O. (2006) Evolutionary product development : how "product phases" can map the status quo and future of a product. In: Design History Conference 2006 ‘Evolution and Design’, 31 August - 2 September 2006, Delft, The Netherlands.

Jamari, J. and Schipper, D.J. (2006) Experimental Investigation of Fully Plastic Contact of a Sphere Against a Hard Flat. Journal of Tribology, 128 (2). pp. 230-235. ISSN 0742-4787

Ven, E.C. van der and Loendersloot, R. and Akkerman, R. (2006) Experimental investigation of the compressibility and permeability of fabric reinforcements. In: 8th International Conference on Flow Processes in Composite Materials, FPCM 2006, 11-13 July 2006, Douai, France.

Ven, E.C. van der and Loendersloot, R. and Akkerman, R.A. (2006) Experimental investigation of the compressibility and permeability of fabric reinforcements : abstract. In: 3rd International Symposium on Manufacturing Technology for Composite Aircraft Structures, 17-18 May 2006, Marknesse, the Netherlands.

Ven, E.C. van der and Loendersloot, R. and Akkerman, R.A. (2006) Experimental verification of out-of-plane permeability : powerpoint presentation. In: 3rd International Symposium on Manufacturing Technology for Composite Aircraft Structures, 17-18 May 2006.

Koissin, V. and Ivanov, D.S. and Lomov, S.V. and Verpoest, I. (2006) Fibre distribution inside yarns of textile composite: gemetrical and FE modelling. In: 8th International Conference on Textile Composites, TEXCOMP 8, 2006, October 16-18, 2006, Nottingham, UK.

Bonnema, Maarten (2006) Function and budget based system architecting. In: The sixth international symposium on tools and methods of competitive engineering, 18-22 April 2006, Ljubljana (pp. pp. 1306-1318).

Tideman, Martijn and Klerkx, Ralph and Huizenga, Bregt and Pardijs, Mark and Hartman, Marloes and Vis, Roeland (2006) Gaming als ontwerpgereedschap : scenario gebaseerd product ontwerpen in spelvorm. Produkt, 14 (6). pp. 16-18. ISSN 0929-7081

Klooster, Roland ten (2006) Het ontwerpen van verpakkingen : het ondergeschoven kindje. Produkt, 14 (6). pp. 12-13. ISSN 0929-7081

Moodij, E. and Rooij, M.B. de and Schipper, D.J. (2006) Hydrodynamic modelling of hydrostatic magnesium extrusion. In: International Tribology Conference, AUSTRIB, December 3-6, 2006, Rydges South Bank, Brisbane, Australia.

Reinders, A.H.M.E. (2006) Industrial design methods for product integrated PEM fuel cells. In: NHA Annual Hydrogen Conference, March 12-16, 2006, Los Angeles, USA.

Koissin, V. and Ruopp, A. and Lomov, S.V. and Verpoest, I. and Witzel, V. and Drechsler, K. (2006) Internal structure of structurally stitched NCF preform. In: 12th European Conference on Composite Materials, ECCM 12, 2006, August 29 - September 1, 2006, Biarritz, France.

Lin, H. and Harrison, P. and Haar, K. van de and Long, A.C. and Akkerman, R. and Clifford, M.J. (2006) Investigation of tool-ply friction of viscous textile composites. In: 8th International Conference on Textile Composites, TexComp 2006, 16-18 October, 2006, Nottingham, UK.

Eger, Arthur O. (2006) Keuzegids Hoger Onderwijs 2005/06. Produkt, 14 (2). pp. 34-35. ISSN 0929-7081

Derks, P.W.J. and Kleingeld, T. and Aken, C. van and Hogendoorn, J.A. and Versteeg, G.F. (2006) Kinetics of absorption of carbon dioxide in aqueous piperazine solutions. Chemical Engineering Science, 61 (20). pp. 6837-6854. ISSN 0009-2509

Akkerman, Remko (2006) Laminate mechanics for balanced woven fabrics. Composites Part B: Engineering, 37 (2-3). pp. 108-116. ISSN 1359-835X

Thije, R.H.W. ten and Akkerman, R. and Huetink, J. (2006) Large Deformation Simulation of Anisotropic Material. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK.

Hoorn, J.A.A. and Versteeg, G.F. (2006) Modeling of Mass Transfer in Combination with a Homogeneously Catalyzed Reaction. AIChE Journal, 52 (7). pp. 2551-2564. ISSN 0001-1541

Hoorn, J.A.A. and Versteeg, G.F. (2006) Modelling of mass transfer in combination with radical reactions. Chemical Engineering Science, 61 (15). pp. 5137-5148. ISSN 0009-2509

Kruijer, M.P. and Warnet, L.L. and Akkerman, R. (2006) Modelling of the viscoelastic behaviour of steel reinforced thermoplastic pipes. Composites Part A: Applied Science and Manufacturing, 37 (2). pp. 356-367. ISSN 1359-835X

Koissin, Vitaly and Ruopp, Andreas and Lomov, Stepan V. and Verpoest, Ignaas and Witzel, Volker and Drechsler, Klaus (2006) On-surface fibre-free zones and irregularity of piercing pattern in structurally stitched NCF preforms. Advanced Composites Letters, 15 (3). pp. 81-88. ISSN 0963-6935

Sanders, A.J.B. and Warntjes, P. and Geelkerken, R.H. and Mastboom, W.J.B. and Klaase, J.M. and Rodel, S.G.J. and Luursema, J.-M. and Kommers, P.A.M. and Verwey, W.B. and Houten, F.J.A.M. van and Kunst, E.E. (2006) Open surgery in VR: Inguinal hernia repair according to Lichtenstein. In: Medicine meets virtual reality 14 : accelerating change in healthcare : next medical toolkit. IOS Press, pp. 477-479. ISBN 9781586035839

Jamari, J. (2006) Running-in of rolling contacts. thesis.

Bonnema, G. Maarten (2006) TRIZ for systems architecting. In: The ETRIA TRIZ Future Conference 2006, 9-11 November 2006, Kortrijk.

Loendersloot, Richard (2006) The structure-permeability relation of textile reinforcements. thesis.

Bonnema, G. Maarten and Houten, Fred J.A.M. van (2006) Use of models in conceptual design. Journal of Engineering Design, 17 (6). pp. 549-562. ISSN 0954-4828

Vaneker, T.H.J. and Houten, F.J.A.M. van (2006) What-if Design as a Synthesizing Working Method in Product Design. CIRP Annals, 55 (1). pp. 131-134. ISSN 0007-8506

2005

Hoorn, J.A.A. and Alsters, P.L. and Versteeg, G.F. (2005) A Kinetic Model for Toluene Oxidation Comprising Benzylperoxy Benzoate Ester as Reactive Intermediate in the Formation of Benzaldehyde. International Journal of Chemical Reactor Engineering, 3 . A6. ISSN 1542-6580

Stilma, M.D.C. and Oost, E.C.J. van and Reinders, A.H.M.E. and Eger, A.O. (2005) A study into students' interests in industrial design engineering using a gender pattern analysis. In: Crossing Design Boundaries. Taylor & Francis, London, pp. 145-150. ISBN 9780415391184

Kruijer, M.P. and Warnet, L.L. and Akkerman, R. (2005) Analysis of the mechanical properties of a reinforced thermoplastic pipe (RTP). Composites Part A: Applied Science and Manufacturing, 36 (2). pp. 291-300. ISSN 1359-835X

Hoorn, Johannes Adriaan Aris (2005) Aspects of mass transfer in gas-liquid oxidation reactions. thesis.

Eger, Arthur O. (2005) Ben van Berkel: architectuur en industrieel ontwerpen. Produkt, 13 (2). pp. 28-31. ISSN 0929-7081

Lomov, S.V. and Barburski, M. and Stoilova, Tz. and Verpoest, I. and Akkerman, R. and Loendersloot, R. and Thije, R.H.W. ten (2005) Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preforms. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1188-1206. ISSN 1359-835X

Eger, Arthur O. (2005) De Gulden Snede en het Kindchenschema. Produkt, 13 (1). pp. 23-25. ISSN 0929-7081

Reinders, A.H.M.E. and Akkerman, R. (2005) Design, production and materials of PV-powered consumer products - The case of mass production. In: 20th European Photovoltaic Solar Energy Conference and Exhibition, 6-10 June 2005, Barcelona, Spain.

Deshmukh, S.A.R.K. and Laverman, J.A. and Cents, A.H.G. and Sint Annaland, M. van and Kuipers, J.A.M. (2005) Development of a membrane-assisted fluidized bed reactor - 1 - Gas phase back-mixing and bubble-to-emulsion phase mass transfer using tracer injection and ultrasound experiments. Industrial and Engineering Chemistry Research, 44 (16). pp. 5955-5965. ISSN 0888-5885

Schotborgh, Wouter O. and Kokkeler, Frans G.M. and Tragter, Hans and Houten, Fred J.A.M. van (2005) Dimensionless design graphs for flexure elements and a comparison between three flexure elements. Precision Engineering, 29 (1). pp. 41-47. ISSN 0141-6359

Thije, R.H.W. ten and Akkerman, R. and Loendersloot, R. (2005) Drape simulation of non-crimp fabrics. In: 8th ESAFORM Conference on Material Forming 2005, April 27-29, 2005, Cluj-Napoca, Romania.

Al-Tarazi, Mousa and Heesink, A. Bert M. and Versteeg, Geert F. (2005) Effects of reactor type and mass transfer on the morphology of CuS and ZnS crystals. Crystal Research and Technology, 40 (8). pp. 735-740. ISSN 0232-1300

Eger, A.O. and Boer, A. de (2005) Emerging technology design; A new master course aimed at bringing emerging technologies its break through applications. In: Crossing Design Boundaries: Proceedings of the 3rd Engineering & Product Design Education International Conference, 15-16 September 2005, Edinburg. Taylor & Francis, London, pp. 121-126. ISBN 9780415391184

Pasaribu, H.R. and Reuver, K.M. and Schipper, D.J. and Ran, S. and Wiratha, K.W. and Winnubst, A.J.A. and Blank, D.H.A. (2005) Environmental effects on friction and wear of dry sliding zirconia and alumina ceramics doped with copper oxide. International Journal of Refractory Metals and Hard Materials, 23 (4-6). pp. 386-390. ISSN 0263-4368

Thije, R.H.W. ten and Akkerman, R. (2005) Finite element simulation of draping with non-crimp fabrics. In: Fifteenth International Conference on Composite Materials, ICCM-15, 27 June-1 July 2005, Durban, South-Africa.

Eger, Arthur O. (2005) Frans van der Put. Produkt, 13 (3). pp. 9-13. ISSN 0929-7081

Dindore, V.Y. and Versteeg, G.F. (2005) Gas–liquid mass transfer in a cross-flow hollow fiber module: Analytical model and experimental validation. International journal of heat and mass transfer, 48 (16). pp. 3352-3362. ISSN 0017-9310

Dindore, V.Y. and Brilman, D.W.F. and Versteeg, G.F. (2005) Hollow fiber membrane contactor as a gas–liquid model contactor. Chemical Engineering Science, 60 (2). pp. 467-479. ISSN 0009-2509

Zimmermann, Johann Ulrich (2005) Informational integration of product development software in the automotive industry : the ULEO approach. thesis.

Eger, Arthur O. (2005) International Design Yearbook 2005. Produkt, 13 (5). pp. 39-40. ISSN 0929-7081

Bonnema, G. Maarten and Lutters-Weustink, Ilanit F. and Houten, Fred J.A.M. van (2005) Introducing systems engineering to industrial design engineering students with hands-on experience. In: 18th International Conference on Systems Engineering, 2005. ICSEng 2005 (pp. pp. 408-413).

Eger, Arthur O. (2005) Jan Lucassen. Produkt, 13 (6). pp. 12-14. ISSN 0929-7081

Eger, Arthur O. (2005) Keuzegids Hoger Onderwijs. Produkt, 13 (1). pp. 12-13. ISSN 0929-7081

Tasan, Yusuf Caner (2005) Measurement of deformation in rolling and sliding contacts. thesis.

Masen, M.A. and Rooij, M.B. de and Schipper, D.J. (2005) Micro-contact based modelling of abrasive wear. Wear, 258 (1-4). pp. 339-348. ISSN 0043-1648

Faraon, Irinel Cosmin (2005) Mixed lubricated line contacts. thesis.

Eger, Arthur O. (2005) Morf: een klein, onooglijk monster. Produkt, 13 (2). p. 13. ISSN 0929-7081

Al-Tarazi, Mousa and Heesink, A. Bert M. and Versteeg, Geert F. and Azzam, Mohammed O.J. and Azzam, Khalid (2005) Precipitation of CuS and ZnS in a bubble column reactor. AIChE Journal, 51 (1). pp. 235-246. ISSN 0001-1541

Wijskamp, Sebastiaan (2005) Shape distortions in composites forming. thesis.

Dindore, V.Y. and Cents, A.H.G. and Brilman, D.W.F. and Versteeg, G.F. (2005) Shell-Side Dispersion Coefficients in a Rectangular Cross-Flow Hollow Fibre Membrane Module. Transactions of the Institution of Chemical Engineers. Part A: Chemical engineering research and design, 83 (3). pp. 317-325. ISSN 0263-8762

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2005) Spring-forward in composite plate elements. In: 8th ESAFORM Conference on Material Forming 2005, April 27-29, 2005, Cluj-Napoca, Romania.

Cents, A.H.G. and Bruijn, F.T. de and Brilman, D.W.F. and Versteeg, G.F. (2005) Validation of the Danckwerts-plot technique by simultaneous chemical absorption of CO2 and physical desorption of O2. Chemical Engineering Science, 60 (21). pp. 5809-5818. ISSN 0009-2509

2004

Eger, A.O. and Lutters, D. and Houten, F.J.A.M. van (2004) 'Create the future': an environment for excellence in teaching future-oriented Industrial Design Engineering. In: 2nd International Engineering and Product Design Education Conference, IEPDE, September 2-3, 2004, Delft, The Netherlands.

Eger, Arthur O. (2004) 35 jaar. Produkt, 12 (4). p. 11. ISSN 0929-7081

Basson, Anton H. and Bonnema, G. Maarten and Liu, Yang (2004) A flexible electro-mechanical design information system. In: Tools and methods of competitive engineering. Millpress, Rotterdam, pp. 879-890. ISBN 9789059660182

Loendersloot, R. and Akkerman, R. and Lomov, S.V. (2004) A permeability prediction for (un)sheared non-crimp fabrics. In: 7th International Conference on Flow Processes in Composite Materials, 7-9 July 2004, Newark, Delaware, USA.

Winnubst, A.J.A. and Ran, S. and Wiratha, K.W. and Blank, D.H.A. and Pasaribu, H.R. and Sloetjes, J.W. and Schipper, D.J. (2004) A wear-resistant zirconia ceramic for low friction application. Key Engineering Materials, 264-268 . pp. 809-812. ISSN 1013-9826

Masen, Marc Arthur (2004) Abrasive tool wear in metal forming processes. thesis.

Masen, M.A. and Rooij, M.B. de (2004) Abrasive wear between rough surfaces in deep drawing. Wear, 256 (6). pp. 639-646. ISSN 0043-1648

Pasaribu, H.R. and Schipper, D.J. (2004) Application of a Deterministic Contact Model to Analyze the Contact of a Rough Surface Against a Flat Layered Surface. Journal of Tribology, 127 (2). pp. 451-455. ISSN 0742-4787

Stevens, J.H.W. and Schippers, D. and Reinders, A.H.M.E. (2004) Corporate design : zonder onderscheid geen identiteit. Produkt, 12 (1). pp. 22-25. ISSN 0929-7081

Al-Tarazi, Mousa and Heesink, A. Bert M. and Azzam, Mohammed O.J. and Yahya, Salah Abu and Versteeg, Geert F. (2004) Crystallization kinetics of ZnS precipitation; an experimental study using the mixed-suspension-mixed-product-removal (MSMPR) method. Crystal Research and Technology, 39 (8). pp. 675-685. ISSN 0232-1300

Tideman, M. and Voort, M.C. van der and Houten, F.J.A.M. van (2004) Design and evaluation of a virtual gearshift application. In: IEEE Intelligent Vehicles Symposium 2004, June 14-17, 2004, Parma, Italy (pp. pp. 465-470).

Eger, Arthur O. (2004) Designprijzen: de meest bekroonden. Produkt, 12 (6). pp. 14-15. ISSN 0929-7081

Garcia, Monserrat and Rooij, Matthijn de and Winnubst, Louis and Zyl, Werner E. van and Verweij, Henk (2004) Friction and wear studies on nylon-6/SiO2 nanocomposites. Journal of Applied Polymer Science, 92 (3). pp. 1855-1862. ISSN 0021-8995

Kerkwijk, Bas and Garcia, Monserrat and Zyl, Werner E. van and Winnubst, Louis and Mulder, Elmer J. and Schipper, Dik J. and Verweij, Henk (2004) Friction behaviour of solid oxide lubricants as second phase in alpha-Al2O3 and stabilised ZrO2 composites. Wear, 256 (1-2). pp. 182-189. ISSN 0043-1648

Al-Tarazi, Mousa (2004) Gas-Liquid Precipitation of Water Dissolved Heavy Metal Ions Using Hydrogen Sulfide Gas. thesis.

Burchitz, I. and Meinders, T. and Atzema, E.H. and Kappert, H. and Konter, A.W.A. and Meijers, S.E. and Rietman, A.D. (2004) Improving numerical predictability of Springback [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Wasewar, Kailas L. and Heesink, A. Bert M. and Versteeg, Geert F. and Pangarkar, Vishwas G. (2004) Intensification of conversion of glucose to lactic acid: equilibria and kinetics for back extraction of lactic acid using trimethylamine. Chemical Engineering Science, 59 (11). pp. 2315-2320. ISSN 0009-2509

Takata, S. and Kimura, F. and Houten, F.J.A.M. van and Westkamper, E. and Shpitalni, M. and Ceglarek, D. and Lee, J. (2004) Maintenance: Changing Role in Life Cycle Management. CIRP Annals, 53 (2). pp. 643-655. ISSN 0007-8506

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2004) Modelling shape distortions in composite products. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004 , Trondheim, Norway.

Loendersloot, R. and Ruijter, W. and Akkerman, R. (2004) Multigrid & Network Approach based Permeability Prediction [Poster]. In: 7th engineering mechanics symposium, November 22-23 2004, Rolduc, Kerkrade.

Higler, A. and Chande, R. and Taylor, R. and Baur, R. and Krishna, R. (2004) Nonequilibrium modeling of three-phase distillation. Computers & Chemical Engineering, 28 (10). pp. 2021-2036. ISSN 0098-1354

Heide, E. van der and Schipper, D.J. (2004) On the Frictional Heating in Single Summit Contacts: Towards Failure at Asperity Level in Lubricated Systems. Journal of Tribology, 126 (2). pp. 275-280. ISSN 0742-4787

Kürten, U. and Sint Annaland, Martin van and Kuipers, J.A.M. (2004) Oxygen distribution in packed bed membrane reactors for partial oxidation systems and the effect on the product selectivity. International Journal of Chemical Reactor Engineering, 2 . A24. ISSN 1542-6580

Kürten, U. and Sint Annaland, M. van and Kuipers, J.A.M. (2004) Oxygen distribution in packed-bed membrane reactors for partial oxidations: effect of the radial porosity profiles on the product selectivity. Industrial and Engineering Chemistry Research, 43 (16). pp. 4753-4760. ISSN 0888-5885

Loendersloot, R. and Akkerman, R. (2004) Permeability Experiments: Design, development and methodology of a resin transfer moulding measuring device [Abstract]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Loendersloot, R. and Thije, R.H.W. ten and Akkerman, R. and Lomov, S.V. (2004) Permeability prediction of non-crimp fabrics based on a geometric model. In: 11th European conference on composite materials, May 31 - June 3, 2004, Rhodes, Greece.

Al-Tarazi, Mousa and Heesink, A. Bert M. and Versteeg, Geert F. (2004) Precipitation of metal sulphides using gaseous hydrogen sulphide: mathematical modelling. Chemical Engineering Science, 59 (3). pp. 567-579. ISSN 0009-2509

Lamers, Edwin Adriaan Derk (2004) Shape distortions in fabric reinforced composite products due to processing induced fibre reorientation. thesis.

Eger, Arthur O. (2004) Stopping Power : nieuwe uitgave van boeken Dutch Design. Produkt, 12 (6). pp. 30-33. ISSN 0929-7081

Koissin, Vitaly and Skvortsov, Vitaly and Krahmalev, Sergey and Shipsha, Andrey (2004) The elastic response of sandwich structures to local loading. Composite Structures, 63 (3-4). pp. 375-385. ISSN 0263-8223

Koissin, Vitaly and Shipsha, Andrey and Rizov, Victor (2004) The inelastic quasi-static response of sandwich structures to local loading. Composite Structures, 64 (2). pp. 129-138. ISSN 0263-8223

Pasaribu, H.R. and Sloetjes, J.W. and Schipper, D.J. (2004) The transition of mild to severe wear of ceramics. Wear, 256 (6). pp. 585-591. ISSN 0043-1648

Capota, Kevin (2004) Vormgeving van een communicatieset naar emoties. Produkt, 12 (5). pp. 40-42. ISSN 0929-7081

Pasaribu, H.R. and Sloetjes, J.W. and Schipper, D.J. and Ran, S. and Wiratha, K.W. and Winnubst, A.J.A. and Blank, D.H.A. (2004) Wear-resistant CuO-doped zirconia ceramic with low friction. In: International Symposium on Inorganic and Environmental Materials, ISIEM, 18-21 October 2004, Eindhoven, The Netherlands.

Lutters, D. and Vaneker, T.H.J. and Houten, F.J.A.M. van (2004) ‘What-if’ design: a synthesis method in the design process. CIRP Annals, 53 (1). pp. 113-116. ISSN 0007-8506

2003

Rexwinkel, G. and Berkhout, J.T.A.M. and Heesink, A.B.M. (2003) Adsorption of chlorinated hydrocarbons from aqueous solutions by wetted and non-wetted synthetic sorbents: dynamics. Chemical Engineering Science, 58 (7). pp. 1301-1314. ISSN 0009-2509

Bonnema, G. Maarten and Houten, Fred J.A.M. van (2003) Conceptual design in a high-tech environment. In: The 2003 CIRP International Seminar, 14 May 2003, Grenoble.

Mentink, R.J. and Lutters, D. and Streppel, A.H. and Kals, H.J.J. (2003) Determining material properties of sheet metal on a press brake. Journal of Materials Processing Technology, 141 (1). pp. 143-154. ISSN 0924-0136

Roos, A.C. and Verschuur, R.-J. and Schreurs, B. and Scholz, R. and Jansens, P.J. (2003) Development of a Vacuum Crystallizer for the Freeze Concentration of Industrial Waste Water. Transactions of the Institution of Chemical Engineers. Part A: Chemical engineering research and design, 81 (8). pp. 881-892. ISSN 0263-8762

Goldschmidt, M.J.V. and Link, J.M. and Mellema, S. and Kuipers, J.A.M. (2003) Digital image analysis measurements of bed expansion and segregation dynamics in dense gas-fluidized beds. Powder Technology, 138 (2-3). pp. 135-159. ISSN 0032-5910

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2003) Drape Modelling of Multi-Layered Composites. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Mentink, R.J. and Houten, F.J.A.M. van and Kals, H.J.J. (2003) Dynamic process management for engineering environments. CIRP Annals, 52 (1). pp. 351-354. ISSN 0007-8506

Dijkstra, P.T.S. and Gaymans, R.J. and Dijk, D.J. van and Huetink, J. (2003) Elasticity at Large Deformations and High Strain Rates in Injection Molded Polypropylene. Polymer Engineering and Science, 43 (9). pp. 1613-1623. ISSN 0032-3888

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2003) Fibre Orientation Modelling for Rubber Press Forming of Thermoplastic Laminates. International Journal of Forming Processes, 6 (3-4). pp. 443-463. ISSN 1292-7775

Pasaribu, H.R. and Sloetjes, J.W. and Schipper, D.J. (2003) Friction reduction by adding copper oxide into alumina and zirconia ceramics. Wear, 255 (1-6). pp. 699-707. ISSN 0043-1648

Heide, E. van der and Schipper, D.J. (2003) Galling initiation due to frictional heating. Wear, 254 (11). pp. 1127-1133. ISSN 0043-1648

Dindore, Vishwas Yashwant (2003) Gas purification using membrane gas absorption processes. thesis.

Wasewar, Kailas L. and Pangarkar, Vishwas G. and Heesink, A. Bert M. and Versteeg, Geert F. (2003) Intensification of enzymatic conversion of glucose to lactic acid by reactive extraction. Chemical Engineering Science, 58 (15). pp. 3385-3393. ISSN 0009-2509

Cents, Antonius Harold Gerrit (2003) Mass transfer and hydrodynamics in stirred gas-liquid-liquid contactors. thesis.

Skvortsov, Vitaly and Krakhmalev, Sergey and Koissin, Vitaly and Shipsha, Andrey (2003) Non-stationary oscillations of sandwich plates under local dynamic loading. In: 10th International Congress on Sound and Vibration, ICSV 2003, July 7-10 2003, Stockholm, Sweden.

Ruijter, W. and Spallino, R. and Warnet, L. and Boer, A. de (2003) Optimization of composite panels using neural networks and genetic algorithms. In: Second MIT Conference on Compurational Fluid and Solid Mechanics, June 17–20, 2003, Boston MA, USA (pp. pp. 2359-2363).

Loendersloot, R. and Thije, R.H.W. ten and Akkerman, R. and Lomov, S.V. (2003) Permeability Prediction of Non-Crimp Fabrics Based on a Geometric Model. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Wijskamp, S. and Akkerman, R. and Lamers, E.A.D. (2003) Residual stresses in non-symmetrical carbon/epoxy laminates. In: ICCM 14, International conference on composites: Bridging the Gap Between Academia and Industry,, July 14-18, 2003, San Diego, California.

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2003) Residual stresses in rubber formed thermoplastic composites. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Reinders, A.H.M.E. and Vringer, K. and Blok, K. (2003) The direct and indirect energy requirement of households in the European Union. Energy Policy, 31 (2). pp. 139-153. ISSN 0301-4215

Warnet, L.L. and Akkerman, R. and Reed, P.E. (2003) The effect of residual stress on transverse cracking in crossply carbon-polyetherimide laminates under bending. In: Fracture of Polymers, Composites and Adheives II. European Structural Integrity Society, 32 . Elsevier, pp. 465-476. ISBN 9780080441955

Pennings, B. and Drogen, M. van and Brandsma, A. and Ginkel, E. van and Lemmens, M. (2003) Van Doorne's CVT fluid test: A test method on Belt-pulley level to select fluids for push belt CVT applications. In: SAE 2003-01-3253, Pittsburgh, USA (pp. 1 - 16).

Heide, E. van der and Burlat, M. and Bolt, P.J. and Schipper, D.J. (2003) Wear of soft tool materials in sliding contact with zinc coated steel sheet. Journal of Materials Processing Technology, 141 (2). pp. 197-201. ISSN 0924-0136

2002

Dijkstra, P.T.S. and Dijk, D.J. van and Huetink, J. (2002) A microscopy study of the transition from yielding to crazing in polypropylene. Polymer Engineering and Science, 42 (1). pp. 152-160. ISSN 0032-3888

Wullink, G. and Giebels, M.M.T. and Kals, H.J.J. (2002) A system architecture for holonic manufacturing planning and control (EtoPlan). Robotics and Computer-Integrated Manufacturing, 18 (3-4). pp. 313-318. ISSN 0736-5845

Masen, M.A. and Rooij, M.B. de (2002) Abrasive Wear between Rough Surfaces in Deep Drawing. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Klamt, Andreas and Krooshof, Gerard J.P. and Taylor, Ross (2002) COSMOSPACE: Alternative to conventional activity-coefficient models. AIChE Journal, 48 (10). pp. 2332-2349. ISSN 0001-1541

Kumar Paramasivam Senthil, P.S. (2002) Development and Design of Membrane Gas Absorption Processes. thesis.

Driel, C.J.G. van and Tillema, F. and Voort, M.C. van der (2002) Directives for new-generation Fuel Economy Devices. [Report]

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2002) Drape modelling of multilayer fabric reinforced thermoplastic laminates. In: Sixth International Conference on Textile Composites (TEXCOMP 6), September 11-13, 2002, Philadelphia, Pennsylvania, USA.

Masen, M.A. and Venner, C.H. and Lugt, P.M. and Tripp, J.H. (2002) Effects of Surface Micro-Geometry On the Lift-Off Speed of an EHL Contact. Tribology transactions, 45 (1). pp. 21-30. ISSN 1040-2004

Wasewar, Kailas L. and Heesink, A. Bert M. and Versteeg, Geert F. and Pangarkar, Vishwas G. (2002) Equilibria and kinetics for reactive extraction of lactic acid using Alamine 336 in decanol. Journal of Chemical Technology and Biotechnology, 77 (9). pp. 1068-1075. ISSN 0268-2575

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2002) Fibre Orientation Modelling for Rubber Press Forming of Thermoplastic Laminates. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Yawalkar, Archis A. and Heesink, Albertus B.M. and Versteeg, Geert F. and Pangarkar, Vishwas G. (2002) Gas Hold-Up in Stirred Tank Reactors in the Presence of Inorganic Electrolytes. Canadian Journal of Chemical Engineering, 80 (5). pp. 791-799. ISSN 0008-4034

Yawalkar, Archis A. and Heesink, Albertus B.M. and Versteeg, Geert F. and Pangarkar, Vishwas G. (2002) Gas-Liquid Mass Transfer Coefficient in Stirred Tank Reactors. Canadian Journal of Chemical Engineering, 80 (5). pp. 840-848. ISSN 0008-4034

Akkerman, R. and Warnet, L.L. and Ven, E.C. van der (2002) Impact damage in woven fabric reinforced composites. In: 5th International Conference on Textile Composites, TexComp 2002, 11-13 September 2002, Philadelphia, PA, USA.

Heide, Emile van der (2002) Lubricant failure in sheet metal forming processes. thesis.

Heydenrych, M.D. and Greeff, P. and Heesink, A.B.M. and Versteeg, G.F. (2002) Mass transfer in rolling rotary kilns: a novel approach. Chemical Engineering Science, 57 (18). pp. 3851-3859. ISSN 0009-2509

Akkerman, R. (2002) On the properties of quasi-isotropic laminates. Composites Part B: Engineering, 33 (2). pp. 133-140. ISSN 1359-835X

Kessels, J.F.A. and Akkerman, R. (2002) Prediction of the yarn trajectories on complex braided preforms. Composites Part A: Applied Science and Manufacturing, 33 (8). pp. 1073-1081. ISSN 1359-835X

Maarseveen, M.F.A.M. van and Voort, M.C. van der and Driel, C.J.G. van (2002) Qualitative Survey on Fuel Economy Devices. [Report]

Wasewar, Kailas L. and Heesink, A. Bert M. and Versteeg, Geert F. and Pangarkar, Vishwas G. (2002) Reactive extraction of lactic acid using alamine 336 in MIBK: equilibria and kinetics. Journal of Biotechnology, 97 (1). pp. 59-68. ISSN 0168-1656

Akkerman, R. and Kessels, J.F.A. (2002) Simulations of the braiding process for RTM preforms. In: 5th International Conference on Textile Composites, TexComp 2002, 11-13 September 2002, Philadelphia, PA, USA.

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2002) Spring forward of woven fabric reinforced composites. In: 5th International Conference on Textile Composites, TexComp 2002, 11-13 September 2002, Philadelphia, PA, USA.

Zimmermann, J.U. and Haasis, S. and Houten, F.J.A.M. van (2002) ULEO - Universal Linking of Engineering Objects. CIRP Annals, 51 (1). pp. 99-102. ISSN 0007-8506

Wijskamp, Sebastiaan and Lamers, Edwin and Akkerman, Remko and Ven, Erik van de (2002) Warpage of rubber pressed composites. In: 10th European Conference on Composite Materials, ECCM 2002, 3-7 June 2002, Brugge, Belgium .

2001

Voort, Mascha van der and Dougherty, Mark and Maarseveen, Martin van (2001) A prototype fuel-efficiency support tool. Transportation Research, Part C: Emerging technologies, 9 (4). pp. 279-296. ISSN 0968-090X

Rooij, M.B. de and Schipper, D.J. (2001) Analysis of Material Transfer From a Soft Workpiece to a Hard Tool: Part I-Lump Growth Model. Journal of Tribology, 123 (3). pp. 469-473. ISSN 0742-4787

Rooij, M.B. de and Schipper, D.J. (2001) Analysis of Material Transfer From a Soft Workpiece to a Hard Tool: Part II-Experimental Verification of the Proposed Lump Growth Model. Journal of Tribology, 123 (3). pp. 474-478. ISSN 0742-4787

Heydenrych, M.D. and Schieke, J. and Heesink, A.B.M. and Kuipers, J.A.M. (2001) Diffusion effects in rotating rotary kilns. South African Journal of Chemical Engineering, 13 (1). pp. 17-28. ISSN 1026-9185

Akkerman, Remko (2001) Double dome experiment. In: NSF Workshop on Composite Sheet Forming, September 5-7, 2001, Lowell, MA, USA.

Baur, R. and Taylor, R. and Krishna, R. (2001) Dynamic behaviour of reactive distillation tray columns described with a nonequilibrium cell model. Chemical Engineering Science, 56 (4). pp. 1721-1729. ISSN 0009-2509

Ueda, K. and Markus, A. and Monostori, L. and Kals, H.J.J. and Arai, T. (2001) Emergent Synthesis Methodologies for Manufacturing. CIRP Annals, 50 (2). pp. 535-551. ISSN 0007-8506

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2001) Finite Element Modelling of fabric draping [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Elk, Edwin Pieter van (2001) Gas-Liquid reactions - Influence of bulk and mass transfer on process performance. thesis.

Heydenrych, Michael David (2001) Modelling of Rotary Kilns. thesis.

Westeneng, Jan Dirk (2001) Modelling of contact and friction in deep drawing processes. thesis.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2001) Modelling of fabric draping: Finite elements versus a geometrical method. In: 4th ESAFORM Conference on Material Forming 2001, April 23-25, 2001, Liège, Belgium.

Elk, E.P. van and Borman, P.C. and Kuipers, J.A.M. and Versteeg, G.F. (2001) Modelling of gas-liquid reactors - stability and dynamics behaviour of a hydroformylation reactor; influence of mass transfer in the kinetics controll regime. Chemical Engineering Science, 56 . pp. 1491-1500. ISSN 0009-2509

Geiger, M. and Kals, H.J.J. and Shirvani, B. and Singh, U.P. (2001) Preface. Journal of Materials Processing Technology, 115 (1). p. 1. ISSN 0924-0136

Streppel, A.H. and Lutters, D. and Brinke, E. ten and Pijlman, H.H. and Kals, H.J.J. (2001) Process modelling for air bending: validation by experiments and simulations. Journal of Materials Processing Technology, 115 (1). pp. 76-82. ISSN 0924-0136

Loendersloot, R. and Akkerman, R. (2001) Resin Transfer Moulding of high performance composites [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Bor, T.C. and Cleveringa, H.H.M. and Delhez, R. and Giessen, E. van der (2001) Simulation of X-ray diffraction-line broadening due to dislocations in a model composite material. Materials Science and Engineering A: Structural materials, 309-31 . pp. 505-509. ISSN 0025-5416

Warnet, L. and Greasley, A. (2001) Transient forces generated by projectiles on variable quality mouthguards monitored by instrumented impact testing. British Journal of Sports Medicine, 35 (4). pp. 257-262. ISSN 0306-3674

Tillema, H.G. (2001) Validation of an airborne noise toolbox [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Kerkrade, The Netherlands.

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2001) Warping of rubber pressed composite panels [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Metselaar, H.S.C. and Kerkwijk, B. and Mulder, E.J. and Verweij, H. and Schipper, D.J. (2001) Wear of ceramics due to thermal stress: a thermal severity parameter. Wear, 249 (10-11). pp. 962-970. ISSN 0043-1648

Lutters, D. and Mentink, R.J. and Houten, F.J.A.M. van and Kals, H.J.J. (2001) Workflow management based on Information Management. CIRP Annals, 50 (1). pp. 309-312. ISSN 0007-8506

2000

Weustink, I.F. and Brinke, E. ten and Streppel, A.H. and Kals, H.J.J. (2000) A generic framework for cost estimation and cost control in product design. Journal of Materials Processing Technology, 103 (1). pp. 141-148. ISSN 0924-0136

Gelinck, E.R.M. and Schipper, D.J. (2000) Calculation of stribeck curves for line contacts. Tribology International, 33 (3-4). pp. 175-181. ISSN 0301-679X

Zheng, Jumeng and Salamon, David and Lefferts, Leon and Wessling, Matthias and Winnubst, Louis (2000) Ceramic microfluidic monoliths by ice templating. Microporous and mesoporous materials, 134 (1-3). pp. 216-219. ISSN 1387-1811

Akkerman, R. and Reed, P.E. and Huang, K.Y. and Warnet, L. (2000) Comparison of fracture toughness (GIC) values of polyetherimide (PEI) and a carbon-fibre/PEI composite: an experimental and theoretical study. In: Second ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives, 13-15 September 1999, Les Diablerets, Switzerland (pp. pp. 3-14).

Lutters, D. and Brinke, E. ten and Streppel, A.H. and Kals, H.J.J. (2000) Computer aided process planning for sheet metal based on information management. Journal of Materials Processing Technology, 103 (1). pp. 120-127. ISSN 0924-0136

Koetsier, M. and Grefen, P. and Vonk, J. (2000) Contracts for Cross-Organizational Workflow Management. In: First International Conference on Electronic Commerce and Web Technologies, EC-Web, September 4-6, 2000, London, UK (pp. pp. 110-121).

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2000) Effects of out-of-plane properties on distortions of composite panels. In: FRC 2000 : composites for the millennium : Eight International Conference on Fibre Reinforced Composites. Woodhead Publishing, pp. 361-368. ISBN 9781855735507

Giebels, Mark Mathieu Theodorus (2000) EtoPlan: a concept for concurrent manufacturing planning and control - Building holarchies for manufacture-to-order environments. thesis.

Vas Bhat, R.D. and Kuipers, J.A.M. and Versteeg, G.F. (2000) Mass transfer with complex chemical reactions in gas-liquid systems: two-step reversible reactions with unit stoichiometric and kinetic orders. Chemical Engineering Journal, 76 (2). pp. 127-152. ISSN 1385-8947

Vonk, Jochem and Derks, Wijnand and Grefen, Paul and Koetsier, Marjanca (2000) Model, architecture and system for cross-organizational transaction support in virtual enterprises. [Report]

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2000) Modelling of Residual Stresses in Rubber Pressed Composite Products. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Elk, E.P. van and Borman, P.C. and Kuipers, J.A.M. and Versteeg, G.F. (2000) Modelling of gas-liquid reactors - implementation of the penetration model in dynamic modelling of gas-liquid processes with the presence of a liquid bulk. Chemical Engineering Journal, 2000 (76). pp. 223-237. ISSN 1385-8947

Elk, E.P. van and Borman, P.C. and Kuipers, J.A.M. and Versteeg, G.F. (2000) Modelling of gas-liquid reactors - stability and dynamic behaviour of a hydroformylation reactor, influence of mass transfer in the kinetics controlled regime. In: Sixteenth International Symposium on Chemical Reaction Engineering, ISCRE-16, 10-13 Sept. 2000, Krakow, Poland.

Taylor, R. and Krishna, R. (2000) Modelling reactive distillation. Chemical Engineering Science, 55 (22). pp. 5183-5229. ISSN 0009-2509

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2000) Modelling the distortions of skewed woven fabric reinforced composites. In: Fifth International Conference on Textile Composites (TEXCOMP 5), September 18-20, 2000, Katholieke Universiteit Leuven, Belgium.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2000) Modelling the thermo-elastic properties of skewed woven fabric reinforced composites. In: 9th European Conference on Composite Materials, ECCM, June 4-7 2000, Brighton, UK.

Warnet, Laurent Louis (2000) On the effect of residual stresses on the transverse cracking in cross-ply carbon-polyetherimide laminates. thesis.

Reed, P.E. and Breedveld, G. and Lim, B.C. (2000) Simulation of the drop impact test for moulded thermoplastic containers. International Journal of Impact Engineering, 24 (2). pp. 133-153. ISSN 0734-743X

Houten, F.J.A.M. van and Kimura, F. (2000) The Virtual Maintenance System: A Computer-Based Support Tool for Robust Design, Product Monitoring, Fault Diagnosis and Maintenance Planning. CIRP Annals, 49 (1). pp. 91-94. ISSN 0007-8506

Rouwenhorst, B. and Reuter, B. and Stockrahm, V. and Houtum, G.J. van and Mantel, R.J. and Zijm, W.H.M. (2000) Warehouse design and control: Framework and literature review. European Journal of Operational Research, 122 (3). pp. 515-533. ISSN 0377-2217

1999

Huetink, J. and Boogaard, A.H. van den and Rietman, A.D. and Lof, J. and Meinders, T. (1999) A mixed elastoplastic/rigid-plastic material model. International Journal for Numerical Methods in Engineering, 46 (9). pp. 1421-1434. ISSN 0029-5981

Jansen, K.M.B. and Orij, J.J.W. and Dijk, D.J. van and Meijer, C.Z. (1999) Comparison of residual stress predictions and measurements using excimer laser layer removal. Polymer Engineering and Science, 39 (10). pp. 2030-2041. ISSN 0032-3888

Ranade, V.V. and Kuipers, J.A.M. and Versteeg, G.F. (1999) Gas-liquid reactor/separator: dynamics and operability characteristics. Chemical Engineering Science, 54 (21). pp. 4881-4886. ISSN 0009-2509

Ranade, Vivek V. and Deshpande, Vaibhav R. (1999) Gas–liquid flow in stirred reactors: Trailing vortices and gas accumulation behind impeller blades. Chemical Engineering Science, 54 (12-14). pp. 2305-2315. ISSN 0009-2509

Lutters, D. and Wijnker, T.C. and Kals, H.J.J. (1999) Information Management in Process Planning. CIRP Annals, 48 (1). pp. 385-388. ISSN 0007-8506

Elk, E.P. van and Borman, P.C. and Kuipers, J.A.M. and Versteeg, G.F. (1999) Modelling of gas-liquid reactors - stability and dynamic behaviour of gas-liquid mass transfer accompanied by irreversible reaction. Chemical Engineering Science, 54 (21). pp. 4869-4879. ISSN 0009-2509

Higler, Arnoud and Krishna, R. and Taylor, Ross (1999) Nonequilibrium cell model for multicomponent (reactive) separation processes. AIChE Journal, 45 (11). p. 23572370. ISSN 0001-1541

Rietman, Albert Dirk (1999) Numerical analysis of inhomogeneous deformation in plane strain compression. thesis.

Voort, Mascha van der and Dougherty, Mark (1999) Reducing fuel consumption by using a new fuel-efficiency support tool. In: 5th AFRICON Conference, 28 Sep 1999 - 1 Oct 1999 , Cape Town, South Africa (pp. pp. 27-32).

Metselaar, H.S.C. and Winnubst, A.J.A. and Schipper, D.J. (1999) Thermally induced wear of ceramics. Wear, 225-22 . pp. 857-861. ISSN 0043-1648

Kerkwijk, B. and Winnubst, A.J.A. and Verweij, H. and Mulder, E.J. and Metselaar, H.S.C. and Schipper, D.J. (1999) Tribological properties of nanoscale alumina-zirconia composites. Wear, 225-22 (Part 2). pp. 1293-1302. ISSN 0043-1648

Akkerman, Remko and Pronk, Ruud (1999) Vacuum forming of thermoplastic foam. Polymer Engineering and Science, 39 (10). pp. 2064-2074. ISSN 0032-3888

1998

Bor, T.C. and Huisman, M.C. and Delhez, R. and Mittemeijer, E.J. (1998) A Method to Determine the Volume Fraction of a Separate Component in a Diffracting Volume. In: European Powder Diffraction 5. Materials Science Forum, 278-28 . Trans Tech Publications, pp. 145-150.

Huetink, J. and Boogaard, A.H. van den and Rietman, A.D. and Lof, J. and Meinders, T. (1998) A mixed elastoplastic / rigid-plastic material model. In: Fourth World Congress on Computational Mechanics, WCCM IV, 29 June - 2 July 1998, Buenos Aires, Argentina.

Rooij, M.B. de and Schipper, D.J. (1998) A wear measurement method based on the comparison of local surface heights. Wear, 217 (2). pp. 182-189. ISSN 0043-1648

Helm, P.N. and Huetink, J. and Akkerman, R. (1998) Comparison of artificial dissipation and limited flux schemes in Arbitrary Lagrangian-Eulerian finite element formulations. International Journal for Numerical Methods in Engineering, 41 (6). pp. 1057-1076. ISSN 0029-5981

Jansen, K.M.B. and Dijk, D.J. van and Husselman, M.H. (1998) Effect of processing conditions on shrinkage in injection molding. Polymer Engineering and Science, 38 (5). pp. 838-846. ISSN 0032-3888

Rietman, Bert (1998) Finite Elements for Better Understanding of Compression Tests. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands (pp. p. 20).

Boogaard, A.H. van den and Rietman, A.D. and Huetink, J. (1998) Iterative solvers in forming process simulations. In: 6th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede, the Netherlands.

Wiersma, H.W. and Peeters, L.J.B. and Akkerman, R. (1998) Prediction of springforward in continuous-fibre/polymer L-shaped parts. Composites Part A: Applied Science and Manufacturing, 29 (11). pp. 1333-1342. ISSN 1359-835X

Houten, F.J.A.M. van and Tomiyama, T. and Salomons, O.W. (1998) Product Modelling for Model-Based Maintenance. CIRP Annals, 47 (1). pp. 123-128. ISSN 0007-8506

Jansen, K.M.B. and Dijk, D.J. van and Freriksen, M.J.A. (1998) Shrinkage anisotropy in fiber reinforced injection molded products. Polymer Composites, 19 (4). pp. 325-334. ISSN 0272-8397

Schipper, D.J. and Napel, W.E ten (1998) The effect of the viscosity-pressure behaviour of lubricants on the film thickness in elastohydrodynamically lubricated line contacts. In: Tribology for Energy Conservation. Tribology Series, 34 . Elsevier. ISBN 9780444500335

Akkerman, R. and Vries, R.S. de (1998) Thermomechanical properties of woven fabric composites. In: 7th International Conference on Fibre Reinforced Composites, FRC 1998, 15-17 April 1998 , Newcastle upon Tyne, UK.

1997

Versteeg, G.F. and Visser, J.B.M. and Dierendonck, L.L. van (1997) Absorption accompanied with chemical reaction in trickle-bed reactors. Chemical Engineering Science, 52 (21). pp. 4057-4069. ISSN 0009-2509

Liebers, A. and Kals, H.J.J. (1997) Cost Decision Support in Product Design. CIRP Annals, 46 (1). pp. 107-112. ISSN 0007-8506

He, Y.J. and Winnubst, A.J.A. and Schipper, D.J. and Burggraaf, A.J. and Verweij, H. (1997) Effects of a second phase on the tribological properties of Al2O3 and ZrO2 ceramics. Wear, 210 (1-2). pp. 178-187. ISSN 0043-1648

Englisch, Martin and Ranade, Vidyadhar S. and Lercher, Johannes A. (1997) Hydrogenation of crotonaldehyde over Pt based bimetallic catalysts. Journal of Molecular Catalysis A: Chemical, 121 (1). pp. 69-80. ISSN 1381-1169

Englisch, Martin and Ranade, Vidyadhar S. and Lercher, Johannes A. (1997) Liquid phase hydrogenation of crotonaldehyde over Pt/SiO2 catalysts. Applied Catalysis A: General, 163 (1-2). pp. 111-122. ISSN 0926-860X

Bonn, Miacha and Santen, Rutger A. van and Lercher, Johannes A. and Kleyn, Aart W. and Bakker, Huib J. (1997) Picosecond infrared activation of methanol in acid zeolites. Chemical Physics Letters, 278 (4-6). pp. 213-219. ISSN 0009-2614

Bor, T.C. and Delhez, R. and Mittemeijer, E.J. and Giessen, E. van der (1997) Simulation of X-ray diffraction-line broadening for a material containing misfitting precipitates. Materials Science and Engineering A: Structural materials, 234-23 . pp. 896-899. ISSN 0025-5416

Akkerman, Remko and Pronk, Ruud M. (1997) Thermoforming of foam sheet. In: Polymer Processing Society, PPS Conference '97, Europe/Africa Region Meeting, 19-21 August 1997, Gothenburg, Sweden.

Emmens, Wilko Cornelis (1997) Tribology of flat contacts and its application in deep drawing. thesis.

1996

Salomons, O.W. and Haalboom, F.J. and Jonge Poerink, H.J. and Slooten, F. van and Houten, F.J.A.M. van and Kals, H.J.J. (1996) A computer aided tolerancing tool II: Tolerance analysis. Computers in Industry, 31 (2). pp. 175-186. ISSN 0166-3615

Salomons, O.W. and Jonge Poerink, H.J. and Haalboom, F.J. and Slooten, F. van and Houten, F.J.A.M. van and Kals, H.J.J. (1996) A computer aided tolerancing tool, I: tolerancing specification. Computers in Industry, 31 (2). pp. 161-174. ISSN 0166-3615

Voort, Mascha van der and Dougherty, Mark and Watson, Susan (1996) Combining Kohonen maps with Arima time series models to forecast traffic flow. Transportation Research, Part C: Emerging technologies, 4 (5). pp. 307-318. ISSN 0968-090X

Ligterink, D.J. and Gee, A.W.J. de (1996) Measurement of wear in radial journal bearings. Tribotest, 3 (1). pp. 45-54. ISSN 1354-4063

Schutten, Johannes Marius Jacobus (1996) Shop Floor Scheduling with Setup Times -Efficiency versus Leadtime Performance-. thesis.

Lubbinge, H. and Haar, R. ter and Schipper, D.J. (1996) The Influence of Plastic Bulk Deformation on Surface Roughness and Frictional Behavior during Deep Drawing Processes. In: The Third Body Concept Interpretation of Tribological Phenomena. Tribology Series, 31 . Elsevier, pp. 705-711. ISBN 9780444825025

1995

Salomons, O.W. and Kuipers, J.M. and Graaff, J. de and Slooten, F. van and Houten, F.J.A.M. van and Kals, H.J.J. (1995) Collaborative Product Development in CAD and CAPP : an approach based on communication due to constraint conflicts and user initiative. In: IFIP WG5.2 Workshop on Knowledge-Intensive CAD-1, 26-29 September 1995, Espoo, Finland.

Mantel, R.J. and Landeweerd, H.R.A. (1995) Design and operational control of an AGV system. International Journal of Production Economics, 41 (1-3). pp. 257-266. ISSN 0925-5273

Salomons, O.W. and Slooten, F. van and Franken, F.J. and Houten, F.J.A.M. van and Kals, H.J.J. (1995) Design history functionality in FROOM. International journal of CAD/CAM and computer graphics, 10 (1-2). pp. 95-111. ISSN 0298-0924

Schipper, D.J. and Maathuis, O. (1995) Friction Regimes in the Lubricants Solid-State Regime. In: Lubricants and Lubrication - Proceedings of the 21th leeds-Lyon Symposium on Tribology. Tribology Series (30). Elsevier, pp. 45-51. ISBN 9780444822635

He, Y.J. and Winnubst, A.J.A. and Schipper, D.J. and Bakker, P.M.V. and Burggraaf, A.J. and Verweij, H. (1995) Friction and wear behaviour of ceramic-hardened steel couples under reciprocating sliding motion. Wear, 184 (1). pp. 33-43. ISSN 0043-1648

Schipper, D.J. and Gee, A.W.J. de (1995) Lubrication modes and the IRG transition diagram. Lubrication Science, 8 (1). pp. 27-35. ISSN 0954-0075

Visscher, H. and Rooij, M.B. de and Vroegop, P.H. and Schipper, D.J. (1995) The influence of laser line hardening of carbon steel AISI 1045 on the lubricated wear against steel AISI 52100. Wear, 181-18 (part 2). pp. 638-647. ISSN 0043-1648

1994

Westerterp, K.R. and Jong, W. de and Benthem, G.H.W. van (1994) A more strict criterion for application of homogenous models in modelling in wall-cooled packed bed reactors. Chemical Engineering Science, 49 (22). pp. 3830-3831. ISSN 0009-2509

Salomons, O.W. and Slooten, F. van and Koning, G.W.F. and Houten, F.J.A.M. van and Kals, H.J.J. (1994) Conceptual Graphs in CAD. CIRP Annals, 43 (1). pp. 125-128. ISSN 0007-8506

Vin, L.J. de and Streppel, A.H. and Kals, H.J.J. (1994) Tolerancing and Sheet Bending in Small Batch Part Manufacturing. CIRP Annals, 43 (1). pp. 421-424. ISSN 0007-8506

1993

Mantel, R.J. and Fontein, M. (1993) A practical solution to a newspaper distribution problem. International Journal of Production Economics, 30-31 . pp. 591-600. ISSN 0925-5273

Westerterp, K.R. and Jong, W. de and Benthem, G.H.W. van (1993) Comments on discrimination of three approaches to evaluate heat fluxes for well-cooled fixed bed chemical reactors. Chemical Engineering Science, 48 (14). pp. 2669-2673. ISSN 0009-2509

Lugt, P.M. and Wemekamp, A.W. and Napel, W.E ten and Otten, J.B. and Liempt, P. van (1993) Lubrication in cold rolling: Elasto-plasto-hydrodynamic lubrication. Wear, 166 (2). pp. 203-214. ISSN 0043-1648

Salomons, O.W. and Houten, F.J.A.M. van and Kals, H.J.J. (1993) Review of research in feature-based design. Journal of Manufacturing Systems, 12 (2). pp. 113-132. ISSN 0278-6125

Westerink, E.J. and Gerner, J.W. and Westerterp, K.R. and Wal, S. van der (1993) The lumping of heat transfer parameters in cooled packed beds: effect of the bed entry. Chemical Engineering and Processing, 32 (2). pp. 83-88. ISSN 0255-2701

1992

Rho, H.M. and Geelink, R. and Erve, A.H. van 't and Kals, H.J.J. (1992) An Integrated Cutting Tool Selection and Operation Sequencing Method. CIRP Annals, 41 (1). pp. 517-520. ISSN 0007-8506

Houten, F.J.A.M. van (1992) Manufacturing Interfaces. CIRP Annals, 41 (2). pp. 699-710. ISSN 0007-8506

Moes, H. (1992) Optimum Similarity Analysis with applications to Elastohydrodynamic Lubrication. Wear, 159 (1). pp. 57-66. ISSN 0043-1648

Houten, F.J.A.M. van and Erve, A.H. van 't and Kals, H.J.J. (1992) PART, a feature based computer aided process planning system. International journal of CAD/CAM and computer graphics, 7 (3). ISSN 0298-0924

Appelman, W.J.T.M. and Kuczynski, M. and Versteeg, G.F. (1992) Simultaneous dehydrogenation of organic compounds and hydrogen removal by hydride forming alloys. Applied Catalysis A: General, 81 (1). pp. 35-46. ISSN 0926-860X

1991

Schipper, D.J. and Vroegop, P.H. and Gee, A.W.J. de (1991) Prediction of lubrication regimes of concentrated contacts. Lubrication Science, 3 (3). pp. 191-200. ISSN 0954-0075

Schipper, D.J. and Vroegop, P.H. and Gee, A.W.J. de (1991) Prediction of lubrication regimes of concentrated contacts. Lubrication Science, 3 (2). pp. 131-139. ISSN 0954-0075

Moes, H. (1991) The air gap between tape and drum in a video recorder. Journal of Magnetism and Magnetic Materials, 95 (1). pp. 1-13. ISSN 0304-8853

1990

Huisman, H.H. and Polderman, G.L. and Weeda, P.J. (1990) Maximizing throughput in some simple time-constrained scheduling situations. Engineering Costs and Production Economics, 18 (35). pp. 293-299. ISSN 0167-188X

1988

Versteeg, G.F. (1988) Author's reply to comments by A.K. Biń. Chemical Engineering Science, 43 (11). p. 3114. ISSN 0009-2509

1986

Houten, F.J.A.M. van and Kals, H.J.J. (1986) Strategy in Generative Planning of Turning Processes. CIRP Annals, 35 (1). pp. 331-335. ISSN 0007-8506

1982

Mantel, R.J. and Gaalman, G.J. (1982) Optimal linear decision rules for a work force smoothing model with seasonal demand. Engineering Costs and Production Economics, 6 . pp. 167-173. ISSN 0167-188X

1981

Houten, F.J.A.M. van and Kals, H.J.J. (1981) The Development of a Technological Processor as a Part of a Workpiece Programming System. CIRP Annals, 30 (1). pp. 363-368. ISSN 0007-8506

1980

Ligterink, D.J. and Moes, H. (1980) Wear numbers for ball cup and journal bearings. Wear, 59 (2). pp. 377-382. ISSN 0043-1648

1975

Ligterink, D.J. (1975) Calculation of wear (f.i. wear modulus) in the plastic cup of a hip joint prosthesis. Wear, 35 (1). pp. 113-121. ISSN 0043-1648

This list was generated on Thu Oct 30 06:12:08 2014 CET.