Research Group: Biomaterials Science and Technology (BST)
These publication lists might not be complete. Publications are added regularly.![]() | Up a level |
2012
Dutczak, S.M. and Tanardi, C.R. and Kopec, K.K. and Wessling, M. and Stamatialis, D. (2012) "Chemistry in a spinneret" to fabricate hollow fibers for organic solvent filtration. Separation and purification technology, 86 . 183 - 189. ISSN 1383-5866
Unadkat, H.V. and Rewagad, R.R. and Hulsman, M. and Hulshof, G.F.B. and Truckenmüller, R.K. and Stamatialis, D. and Reinders, M.J.T. and Eijkel, J.C.T. and Berg van den, A. and Blitterswijk van, C.A. and Boer de, J. (2012) A modular versatile chip carrier for high-throughput screening of cell–biomaterial interactions. Journal of the Royal Society Interface, 10 (78). p. 20120753. ISSN 1742-5689
Tijink, M.S.L. and Wester, M. and Sun, J. and Saris, A. and Bolhuis-Versteeg, L.A.M. and Saiful, S. and Joles, J.A. and Borneman, Z. and Wessling, M. and Stamatialis, D. (2012) A novel approach for blood purification: Mixed-matrix membranes combining diffusion and adsorption in one step. Acta biomaterialia, 8 (6). 2279 - 2287. ISSN 1742-7061
Lendlein, A. and Pierce, B. and Ambrosio, L. and Grijpma, D.W. (2012) Advanced functional polymers for medicine: Multifunctional biomaterials. Acta biomaterialia, 8 (12). 4199 - 4199. ISSN 1742-7061
Sharifi, S. and Blanquer, S.B.G. and Kooten van, T.G. and Grijpma, D.W. (2012) Biodegradable nanocomposite hydrogel structures with enhanced mechanical properties prepared by photo-crosslinking solutions of poly(trimethylene carbonate)-poly(ethylene glycol)-poly(trimethylene carbonate) macromonomers and nanoclay particles. Acta biomaterialia, 8 . 4233 - 4243. ISSN 1742-7061
Zant, E. and Bosman, M.J. and Grijpma, D.W. (2012) Combinatorial synthesis of photo-crosslinked biodegradable networks. Journal of applied biomaterials and functional materials, 10 . 197 - 202. ISSN ISSN 2280-8000
Grijpma, D.W. (2012) Composite biomaterials for bone repair and regeneration -reconstruction of orbital floor defects in an animal model. European cells & materials, 24 . 11 - . ISSN 1473-2262
Leeuwen van, A.C. and Bos, R.R.M. and Grijpma, D.W. (2012) Composite materials based on poly(trimethylene carbonate) and β-tricalcium phosphate for orbital floor and wall reconstruction. Journal of biomedical materials research - Part B: applied biomaterials, 100B . 1610 - 1620. ISSN 1552-4973
Dutczak, S.M. and Cuperus, P. and Stamatialis, D. (2012) Crosslinked polyimide membrane. Patent.
Sun, Y. and Finne-Wistrand, A. and Albertsson, A. and Xing, Z. and Mustafa, K. and Hendrikson, W.J. and Grijpma, D.W. and Moroni, L. (2012) Degradable amorphous scaffolds with enhanced mechanical properties and homogeneous cell distribution produced by a three-dimension fiber deposition method. Journal of biomedical materials research part A, 100A (10). 2739 - 2749. ISSN 1549-3295
Ronca, A. and Ambrosio, L. and Grijpma, D.W. (2012) Design of porous three-dimensional PDLLA/nano-hap composite scaffolds using stereolithography. Journal of applied biomaterials and functional materials, 10 . 249 - 258. ISSN ISSN 2280-8000
Bettahalli, N.M.S. and Groen, N. and Steg, H. and Unadkat, H.V. and Boer de, J. and Blitterswijk van, C.A. and Wessling, M. and Stamatialis, D. (2012) Development of multilayer constructs for tissue engineering. Journal of Tissue Engineering and Regenerative Medicine . ISSN 1932-6254
Leeuwen van, A.C. (2012) Development of poly(trimethylene carbonate) based implant devices and their application in oral and maxillofacial surgergy. thesis.
Blanquer, S.B.G. and Sharifi, S. and Grijpma, D.W. (2012) Development of poly(trimethylene carbonate) network implants for annulus fibrosus tissue engineering. Journal of applied biomaterials and functional materials, 10 . 177 - 184. ISSN ISSN 2280-8000
Truckenmüller, R.K. and Giselbrecht, S. and Escalante, M. and Groenendijk, M.N.W. and Papenburg, B.J. and Rivron, N.C. and Unadkat, H.V. and Saile, V. and Subramaniam, V. and Blitterswijk van, C.A. and Wessling, M. and Boer de, J. and Stamatialis, D. (2012) Fabrication of cell container arrays with overlaid surface topographies. Biomedical microdevices, 14 (1). 95 - 107. ISSN 1387-2176
Leeuwen van, A.C. and Huddelston Slater, J.J.R. and Gielkens, P.F.M. and Jong de, J.R. and Grijpma, D.W. and Bos, R.R.M. (2012) Guided bone regeneration in rat mandibular defects using resorbable poly(trimethylene carbonate) barrier membranes. Acta biomaterialia, 8 (4). 1422 - 1429. ISSN 1742-7061
Zwijnenberg, H.J. and Dutczak, S.M. and Boerrigter, M.E. and Hempenius, M.A. and Luiten-Olieman, M.W.J. and Benes, N.E. and Wessling, M. and Stamatialis, D. (2012) Important factors influencing molecular weight cut-off determination of membranes in organic solvents. Journal of membrane science, 390-391 . 211 - 217. ISSN 0376-7388
Leeuwen van, A.C. and Kooten van, T.G. and Grijpma, D.W. and Bos, R.R.M. (2012) In vivo behaviour of a biodegradable poly (trimethylene carbonate) barrier membrane: A histological study in rats. Journal of materials science. Materials in medicine, 23 (8). 1951 - 1959. ISSN 0957-4530
Davison, N.L. and Yuan, H. and Bruijn de, J.D. and Barrere-de Groot, F.YF. (2012) In vivo performance of microstructured calcium phosphate formulated in novel water-free carriers. Acta biomaterialia, 8 (7). 2759 - 2769. ISSN 1742-7061
Barbieri, D. (2012) Instructive composites for bone regeneration. thesis.
Subbiahdoss, G. and Sharifi, S. and Grijpma, D.W. and Laurent, S. and Mei van der, H.C. and Mahmoudi, M. and Busscher, H.J. (2012) Magnetic targeting of surface-modified superparamagnetic iron oxide nanoparticles yields antibacterial efficacy against biofilms of gentamicin-resistant staphylococci. Acta biomaterialia, 8 (6). 2047 - 2055. ISSN 1742-7061
Higuera, G. and Schop, D. and Spitters, T.W.G.M. and Dijkhuizen-Radersma van, R. and Bracke, M. and Bruijn de, J.D. and Martens, D.E. and Karperien, H.B.J. and Boxtel van, A.J.B. and Blitterswijk van, C.A. (2012) Patterns of amino Acid metabolism by proliferating human mesenchymal stem cells. Tissue Engineering. Part A, 18 (5). 654 - 664. ISSN 1937-3341
Jansen, Janine and Tibbe, M.P. and Mihov, G. and Feijen, J. and Grijpma, D.W. (2012) Photo-crosslinked networks prepared from fumaric acid monoethyl ester-functionalized poly(d,l-lactic acid) oligomers and N-vinyl-2-pyrrolidone for the controlled and sustained release of proteins. Acta biomaterialia, 8 (10). 3652 - 3659. ISSN 1742-7061
Sharifi, S. and Blanquer, S.B.G. and Grijpma, D.W. (2012) Polymeric microstructures with shape-memory properties for biomedical use built by stereolithography. Journal of applied biomaterials and functional materials, 10 . 280 - 286. ISSN ISSN 2280-8000
Kopec, K.K. and Wessling, M. and Stamatialis, D. (2012) Porous membrane structures as stationary phase for capillary electrochromatography. Electrophoresis, 33 (18). 2892 - 2895. ISSN 0173-0835
Sharifi, S. and Blanquer, S.B.G. and Grijpma, D.W. (2012) Preparation of porous structures with shape memory properties from biodegradable polymeric networks. Materials Research Society symposia proceedings, 1403 . 79 - 84. ISSN 0272-9172
Hartsuiker, L. and Petersen, W. and Rayavarapu, R.G. and Lenferink, A.T.M. and Poot, A.A. and Terstappen, L.W.M.M. and Leeuwen van, A.G.J.M. and Manohar, S. and Otto, C. (2012) Raman and Fluorescence Spectral Imaging of Live Breast Cancer Cells Incubated with PEGylated Gold Nanorods. Applied spectroscopy, 66 (1). 66 - 74. ISSN 0003-7028
Basalus, M.Z. and Tandjung, K. and Sen, H. and Apeldoorn van, A.A. and Grijpma, D.W. and Birgelen von, C. (2012) Recent insights from scanning electron microscopic assessment of durable polymer-coated drug-eluting stents. Interventional cardiology, 4 . 661 - 674. ISSN 1755-5302
Groen, R.W.J. and Noort, W.A. and Raymakers, R.A. and Prins, H.J. and Aalders, L. and Hofhuis, F.M. and Moerer, P. and Velzen van, J.F. and Bloem, A.C. and Kessel van, B. and Rozemuller, H. and Binsbergen van, E. and Buijs, A. and Yuan, H. and Bruijn de, J.D. and Weers de, M. and Parren, P.W.H.I. and Schuringa, J.J. and Lokhorst, H.M. and Mutis, T. and Martens, ACM (2012) Reconstructing the human hematopoietic niche in immunodeficient mice: Opportunities for studying primary multiple myeloma. Blood, 120 (3). e9 - e16. ISSN 0006-4971
Leeuwen van, A.C. and Ong, S.H. and Vissink, A. and Grijpma, D.W. and Bos, R.R.M. (2012) Reconstruction of orbital wall defects: Recommendations based on a mathematical model. Experimental eye research, 97 (1). 10 - 18. ISSN 0014-4835
Sharifi, S. and Grijpma, D.W. (2012) Resilient Amorphous Networks Prepared by Photo-Crosslinking High-Molecular-Weight D,L-Lactide and Trimethylene Carbonate Macromers: Mechanical Properties and Shape-Memory Behavior. Macromolecular bioscience, 12 . 1423 - 1435. ISSN 1616-5187
Basalus, M.W. and Tandjung, K. and Westen van, T. and Sen, H. and Jagt van der, P.K.N. and Grijpma, D.W. and Apeldoorn van, A.A. and Birgelen von, C. (2012) Scanning electron microscopic assessment of coating irregularities and their precursors in unexpanded durable polymer-based drug-eluting stents. Catheterization and cardiovascular interventions, 79 (4). 644 - 653. ISSN 1522-1946
Sharifi, S. (2012) The development of novel biodegradable polymeric biomaterials for use in the repair of damaged intervertebral discs. thesis.
2011
Yuan, Huipin and Fernandes, Hugo and Habibovic, Pamela and Boer de, Jan and Barradas, Ana M.C. and Ruiter de, Ad and Walsh, William R. and Blitterswijk van, Clemens A. and Bruijn de, Joost D. (2011) 'Smart' biomaterials and osteoinductivity. Nature Reviews Rheumatology, 7 . c1 - . ISSN 1759-4790
Unadkat, Hemant V and Hulsman, Marc and Cornelissen, Kamiel and Papenburg, Bernke J. and Truckenmuller, Roman K. and Post, Gerhard F. and Uetz, Marc and Reinders, Marcel J.T. and Blitterswijk van, Clemens A. and Stamatialis, Dimitrios and Boer de, Jan (2011) An algorithm-based topographical biomaterials library to instruct cell fate. Proceedings of the National Academy of Sciences of the United States of America, PNAS, 108 (40). pp. 16565-16570. ISSN 0027-8424
Kopec, K.K. and Dutczak, S.M. and Wessling, M. and Stamatialis, D.F. (2011) Chemistry in a spinneret—On the interplay of crosslinking and phase inversion during spinning of novel hollow fiber membranes. Journal of Membrane Science, 369 (1-2). pp. 308-318. ISSN 0376-7388
Bettahalli, N.M.S. and Steg, H. and Wessling, M. and Stamatialis, D. (2011) Development of poly(l-lactic acid) hollow fiber membranes for artificial vasculature in tissue engineering scaffolds. Journal of Membrane Science, 371 (1-2). pp. 117-126. ISSN 0376-7388
Song, Yan and Wennink, Jos W.H. and Kamphuis, Marloes M.J. and Sterk, Lotus M.T. and Vermes, Istvan and Poot, André A. and Feijen, Jan and Grijpma, Dirk W. (2011) Dynamic Culturing of Smooth Muscle Cells in Tubular Poly(Trimethylene Carbonate) Scaffolds for Vascular Tissue Engineering. Tissue Engineering. Part A, 17 (3-4). pp. 381-387. ISSN 1937-3341
Liao, Hongbing and Walboomers, X. Frank and Habraken, Wouter J.E.M. and Zhang, Zheng and Li, Yubao and Grijpma, Dirk W. and Mikos, Antonios G. and Wolke, Joop G.C. and Jansen, John A. (2011) Injectable calcium phosphate cement with PLGA, gelatin and PTMC microspheres in a rabbit femoral defect. Acta Biomaterialia, 7 (4). pp. 1752-1759. ISSN 1742-7061
Kopec, K.K. and Dutczak, S.M. and Wessling, M. and Stamatialis, D.F. (2011) Tailoring the surface charge of an ultrafiltration hollow fiber by addition of a polyanion to the coagulation bore liquid. Journal of Membrane Science, 369 (1-2). pp. 59-67. ISSN 0376-7388
Melchels, Ferry P.W. and Tonnarelli, Beatrice and Olivares, Andy L. and Martin, Ivan and Lacroix, Damien and Feijen, Jan and Wendt, David J. and Grijpma, Dirk W. (2011) The influence of the scaffold design on the distribution of adhering cells after perfusion cell seeding. Biomaterials, 32 (11). pp. 2878-2884. ISSN 0142-9612
2010
Papenburg, Bernke J. and Bolhuis-Versteeg, Lydia A.M. and Grijpma, Dirk W. and Feijen, Jan and Wessling, Matthias and Stamatialis, Dimitrios (2010) A facile method to fabricate poly(l-lactide) nano-fibrous morphologies by phase inversion. Acta Biomaterialia, 6 (7). pp. 2477-2483. ISSN 1742-7061
Meer van der, Andries D. and Vermeul, Kim and Poot, André A. and Feijen, Jan and Vermes, István (2010) A microfluidic wound-healing assay for quantifying endothelial cell migration. American Journal of Physiology. Heart and Circulatory Physiology, 298 . H719-H725. ISSN 0363-6135
Melchels, Ferry P.W. and Feijen, Jan and Grijpma, Dirk W. (2010) A review on stereolithography and its applications in biomedical engineering. Biomaterials, 31 (24). pp. 6121-6130. ISSN 0142-9612
Meer van der, A.D. and Poot, A.A. and Feijen, J. and Vermes, I. (2010) Analyzing shear stress-induced alignment of actin filaments in endothelial cells with a microfluidic assay. Biomicrofluidics, 4 (1). 011103. ISSN 1932-1058
Meer van der, Freek J. and Faber, Dirk J. and Aalders, Maurice C.G. and Poot, André and Vermes, Istvan and Leeuwen van, Ton G. (2010) Apoptosis- and necrosis-induced changes in light attenuation measured by optical coherence tomography. Lasers in Medical Science, 25 (2). pp. 259-267. ISSN 0268-8921
Bat, Erhan and Feijen, Jan and Grijpma, Dirk W. (2010) Biodegradable Elastomeric Networks: Highly Efficient Cross-Linking of Poly(trimethylene carbonate) by Gamma Irradiation in the Presence of Pentaerythritol Triacrylate. Biomacromolecules, 11 (10). pp. 2692-2699. ISSN 1525-7797
Seck, Tetsu M. and Melchels, Ferry P.W. and Feijen, Jan and Grijpma, Dirk W. (2010) Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(d,l-lactide)-based resins. Journal of Controlled Release, 148 (1). pp. 34-41. ISSN 0168-3659
Song, Y. and Wennink, J.W.H. and Kamphuis, M.M.J. and Vermes, I. and Poot, A.A. and Feijen, J. and Grijpma, D.W. (2010) Effective seeding of smooth muscle cells into tubular poly(trimethylenecarbonate) scaffolds for vascular tissue engineering. Journal of Biomedical Materials Research. Part A, 95A (2). pp. 440-446. ISSN 1549-3296
Melchels, Ferry P.W. and Barradas, Ana M.C. and Blitterswijk van, Clemens A. and Boer de, Jan and Feijen, Jan and Grijpma, Dirk W. (2010) Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing. Acta Biomaterialia, 6 (11). pp. 4208-4217. ISSN 1742-7061
Bat, Erhan (2010) Elastomeric networks based on trimethylene carbonate polymers for biomedical applications : physical properties and degradation behaviour. thesis.
Song, Y. and Kamphuis, M.M.J. and Zhang, Z. and Sterk, L.M.Th. and Vermes, I. and Poot, A.A. and Feijen, J. and Grijpma, D.W. (2010) Flexible and elastic porous poly(trimethylene carbonate) structures for use in vascular tissue engineering. Acta Biomaterialia, 6 (4). pp. 1269-1277. ISSN 1742-7061
Meer van der, A.D. and Vermeul, K. and Poot, A.A. and Feijen, J. and Vermes, I. (2010) Flow cytometric analysis of the uptake of low-density lipoprotein by endothelial cells in microfluidic channels. Cytometry Part A, 77 (10). pp. 971-975. ISSN 0196-4763
Habraken, W.J.E.M. and Liao, H.B. and Zhang, Z. and Wolke, J.G.C. and Grijpma, D.W. and Mikos, A.G. and Feijen, J. and Jansen, J.A. (2010) In vivo degradation of calcium phosphate cement incorporated into biodegradable microspheres. Acta Biomaterialia, 6 (6). pp. 2200-2211. ISSN 1742-7061
Melchels, Ferry P.W. and Bertoldi, Katia and Gabbrielli, Ruggero and Velders, Aldrik H. and Feijen, Jan and Grijpma, Dirk W. (2010) Mathematically defined tissue engineering scaffold architectures prepared by stereolithography. Biomaterials, 31 (27). pp. 6909-6916. ISSN 0142-9612
Subbiahdoss, Guruprakash and Grijpma, Dirk W. and Mei van der, Henny C. and Busscher, Henk J. and Kuijer, Roel (2010) Microbial biofilm growth versus tissue integration on biomaterials with different wettabilities and a polymer-brush coating. Journal of Biomedical Materials Research. Part A, 94A (2). pp. 533-538. ISSN 1549-3296
Melchels, Ferry P.W. and Velders, Aldrik H. and Feijen, Jan and Grijpma, Dirk W. (2010) Photo-Cross-Linked Poly(dl-lactide)-Based Networks. Structural Characterization by HR-MAS NMR Spectroscopy and Hydrolytic Degradation Behavior. Macromolecules, 43 (20). pp. 8570-8579. ISSN 0024-9297
Jansen, Janine and Boerakker, Mark J. and Heuts, Jean and Feijen, Jan and Grijpma, Dirk W. (2010) Rapid photo-crosslinking of fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers for drug delivery applications. Journal of Controlled Release, 147 (1). pp. 54-61. ISSN 0168-3659
Meer van der, A.D. and Li, Y. and Duits, M.H.G. and Poot, A.A. and Feijen, J. and Vermes, I. (2010) Shear stress induces a transient and VEGFR-2-dependent decrease in the motion of injected particles in endothelial cells. Biorheology, 47 (3-4). pp. 179-192. ISSN 0006-355X
Jin, R. and Moreira Teixeira, L.S. and Krouwels, A. and Dijkstra, P.J. and Blitterswijk van, C.A. and Karperien, M. and Feijen, J. (2010) Synthesis and characterization of hyaluronic acid–poly(ethylene glycol) hydrogels via Michael addition: An injectable biomaterial for cartilage repair. Acta Biomaterialia, 6 (6). pp. 1968-1977. ISSN 1742-7061
Bat, Erhan and Kothman, Bas H.M. and Higuera Sierra, Gustavo Andrés and Blitterswijk van, Clemens A. and Feijen, Jan and Grijpma, Dirk W. (2010) Ultraviolet light crosslinking of poly(trimethylene carbonate) for elastomeric tissue engineering scaffolds. Biomaterials, 31 (33). pp. 8696-8705. ISSN 0142-9612
2009
Neut, Danielle and Kluin, Otto S. and Crielaard, Bart J. and Mei van der, Henny C. and Busscher, Henk J. and Grijpma, Dirk W. (2009) A biodegradable antibiotic delivery system based on poly-(trimethylene carbonate) for the treatment of osteomyelitis. Acta orthopaedica, 80 (5). pp. 514-519. ISSN 1745-3674
Melchels, Ferry P.W. and Feijen, Jan and Grijpma, Dirk W. (2009) A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography. Biomaterials, 30 (23-24). pp. 3801-3809. ISSN 0142-9612
Hou, Qingpu and Grijpma, Dirk W. and Feijen, Jan (2009) Creep-resistant elastomeric networks prepared by photocrosslinking fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers. Acta Biomaterialia, 5 (5). pp. 1543-1551. ISSN 1742-7061
Papenburg, Bernke J. and Schüller-Ravoo, Sigrid and Bolhuis-Versteeg, Lydia A.M. and Hartsuiker, Liesbeth and Grijpma, Dirk W. and Feijen, Jan and Wessling, Matthias and Stamatialis, Dimitrios (2009) Designing porosity and topography of poly(1,3-trimethylene carbonate) scaffolds. Acta Biomaterialia, 5 (9). pp. 3281-3294. ISSN 1742-7061
Jansen, Janine and Melchels, Ferry P.W. and Grijpma, Dirk W. and Feijen, Jan (2009) Fumaric Acid Monoethyl Ester-Functionalized Poly(d,l-lactide)/N-vinyl-2-pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography. Biomacromolecules, 10 (2). pp. 214-220. ISSN 1525-7797
Bladergroen, Bellinda and Siebum, Bas and Siebers-Vermeulen, Kim G.C. and Kuppevelt van, Toin H. and Poot, André A. and Feijen, Jan and Figdor, Carl G. and Torensma, Ruurd (2009) In Vivo Recruitment of Hematopoietic Cells Using Stromal Cell–Derived Factor 1 Alpha–Loaded Heparinized Three-Dimensional Collagen Scaffolds. Tissue Engineering. Part A, 15 (7). pp. 1591-1599. ISSN 1937-3341
Jin, R. and Moreira Teixeira, L.S. and Dijkstra, P.J. and Karperien, M. and Blitterswijk van, C.A. and Zhong, Z.Y. and Feijen, J. (2009) Injectable chitosan-based hydrogels for cartilage tissue engineering. Biomaterials, 30 (13). pp. 2544-2551. ISSN 0142-9612
Meer van der, A.D. and Kamphuis, M.M.J. and Poot, A.A. and Feijen, J. and Vermes, I. (2009) Lowering Caveolin-1 Expression in Human Vascular Endothelial Cells Inhibits Signal Transduction in Response to Shear Stress. International Journal of Cell Biology . p. 532432. ISSN 1687-8876
Bat, Erhan and Kooten van, Theo G. and Feijen, Jan and Grijpma, Dirk W. (2009) Macrophage-mediated erosion of gamma irradiated poly(trimethylene carbonate) films. Biomaterials, 30 (22). pp. 3652-3661. ISSN 0142-9612
Subbiahdoss, Guruprakash and Kuijer, Roel and Grijpma, Dirk W. and Mei van der, Henny C. and Busscher, Henk J. (2009) Microbial biofilm growth vs. tissue integration: “The race for the surface” experimentally studied. Acta Biomaterialia, 5 (5). pp. 1399-1404. ISSN 1742-7061
Meer van der, A.D. and Poot, A.A. and Duits, M.H.G. and Feijen, J. and Vermes, I. (2009) Microfluidic Technology in Vascular Research. Journal of Biomedicine and Biotechnology, 2009 (823148). ISSN 1110-7243
Papenburg, B.J. and Boer de, J. and Grijpma, D. and Feijen, J. and Blitterswijk van, C.A. and Wessling, M. and Stamatialis, D. (2009) Novel membrane-based scaffolds for tissue engineering. International journal of artificial organs, 32 (7). pp. 409-410. ISSN 0391-3988
Tan, BoonHua and Nabuurs, Tijs and Feijen, Jan and Grijpma, Dirk W. (2009) Redox-initiated poly(methyl methacrylate) emulsion polymerizations stabilized with block copolymers based on methoxy-poly(ethylene glycol), ε-caprolactone, and linoleic acid. Journal of Polymer Science, Part A: Polymer chemistry, 47 (17). pp. 4234-4244. ISSN 0887-624X
2008
Meer van der, A.D. and Kamphuis, M.M.J. and Poot, A.A. and Feijen, J. and Vermes, I. (2008) A microfluidic device for monitoring siRNA delivery under fluid flow. Journal of Controlled Release, 132 (3). e42-e44. ISSN 0168-3659
Nijhuis, E.H.A. and Le Gac, S. and Poot, A.A. and Feijen, J. and Vermes, I. (2008) Bax-mediated mitochondrial membrane permeabilization after heat treatment is caspase-2 dependent. International Journal of Hyperthermia, 24 (4). pp. 357-365. ISSN 0265-6736
Dijkink, Rory and Le Gac, Séverine and Nijhuis, Erwin and Berg van den, Albert and Vermes, István and Poot, André (2008) Controlled cavitation-cell interaction: trans-membrane transport and viability studies. Physics in Medicine and Biology, 53 (2). pp. 375-390. ISSN 0031-9155
Papenburg, Bernke and Schuller, Sigrid and Stamatialis, Dimitrios and Grijpma, Dirk and Boer de, Jan and Blitterswijk van, Clemens and Wessling, Matthias (2008) Flexible micropatterned porous scaffolds: poster presentation. Tissue Engineering. Part A, 14 (5). p. 855. ISSN 1937-3341
Habraken, Wouter J.E.M. and Zhang, Zheng and Wolke, Joop G.C. and Grijpma, Dirk W. and Mikos, Antonios G. and Feijen, Jan and Jansen, John A. (2008) Introduction of enzymatically degradable poly(trimethylene carbonate) microspheres into an injectable calcium phosphate cement. Biomaterials, 29 (16). pp. 2464-2476. ISSN 0142-9612
Nalawade, S.P. and Picchioni, F. and Janssen, L.P.B.M. and Grijpma, D.W. and Feijen, J. (2008) Investigation of the interaction of CO2 with poly (L-lactide), poly(DL-lactide) and poly(-caprolactone) using FTIR spectroscopy. Journal of Applied Polymer Science, 109 (5). pp. 3376-3381. ISSN 0021-8995
Vos de, S.V.N. and Koopmans, S.A. and Hooymans, J.M.M. and Feijen, J. and Grijpma, D.W. (2008) Poly(1,3-trimethylene carbonate) networks as a resorbable scleral buckle. Journal of Controlled Release, 132 (3). e51-e52. ISSN 0168-3659
Song, Y. and Yang, F. and Jansen, J.A. and Kamphuis, M.M.J. and Zhang, Zheng and Poot, A.A. and Vermes, I. and Grijpma, D.W. and Feijen, J. (2008) Poly(trimethylene carbonate) porous tubular structures made by electro-spinning. Journal of Controlled Release, 132 (3). e79-e80. ISSN 0168-3659
Song, Y. and Kamphuis, M. and Zhang, Z. and Vermes, I. and Poot, A.A. and Grijpma, D.W. and Feijen, J. (2008) Poly(trimethylene carbonate)-Based Porous Tubular Structures for Tissue Engineering of Small Diameter Blood Vessels. Tissue Engineering. Part A, 14 (5). p. 927. ISSN 1937-3341
Zhang, Z. and Buwalda, S.J. and Dijkstra, P.J. and Grijpma, D.W. and Poot, A.A. and Steenbergen, W. and Feijen, J. (2008) Polymeric systems for delivery of growth factors to stimulate angiogenesis in tissue engineering. Journal of Controlled Release, 132 (3). e52-e53. ISSN 0168-3659
Nalawade, S.P. and Westerman, D. and Leeke, G. and Santos, R.C.D. and Grijpma, D.W. and Feijen, J. (2008) Preparation of porous poly(trimethylene carbonate) structures for controlled release applications using high pressure CO2. Journal of Controlled Release, 132 (3). e73-e75. ISSN 0168-3659
Melchels, F.P.W. and Grijpma, D.W. and Feijen, J. (2008) Properties of porous structures prepared by stereolithography using a polylactide resin. Journal of Controlled Release, 132 (3). e71-e73. ISSN 0168-3659
Bat, E. and Grijpma, D.W. and Feijen, J. (2008) Thermoreversible gelation behaviour of PTMC-PEG-PTMC triblock copolymers. Journal of Controlled Release, 132 (3). e37-e39. ISSN 0168-3659
Bat, Erhan and Plantinga, Josée A. and Harmsen, Martin C. and Luyn van, Marja J.A. and Zhang, Zheng and Grijpma, Dirk W. and Feijen, Jan (2008) Trimethylene Carbonate and -Caprolactone Based (co)Polymer Networks: Mechanical Properties and Enzymatic Degradation. Biomacromolecules, 9 (11). pp. 3208-3215. ISSN 1525-7797
2007
Leeuwen van, Suze M. and Tan, BoonHua and Grijpma, Dirk W. and Feijen, J. and Karst, Uwe (2007) Characterization of the chemical composition of a block copolymer by liquid chromatography/mass spectrometry using atmospheric pressure chemical ionization and electrospray ionization. Rapid Communications in Mass Spectrometry, 21 (16). pp. 2629-2637. ISSN 0951-4198
Claase, Menno B. and Bruijn de, Joost D. and Grijpma, Dirk W. and Feijen, Jan (2007) Ectopic bone formation in cell-seeded poly(ethylene oxide)/poly(butylene terephthalate) copolymer scaffolds of varying porosity. Journal of Materials Science: Materials in Medicin, 18 (7). pp. 1299-1307. ISSN 0957-4530
2006
Buttafoco, L. and Kolkman, N.G. and Engbers-Buijtenhuijs, P. and Poot, A.A. and Dijkstra, P.J. and Vermes, I. and Feijen, J. (2006) Electrospinning of collagen and elastin for tissue engineering applications. Biomaterials, 27 (5). pp. 724-734. ISSN 0142-9612
Nalawade, S.P. and Picchioni, F. and Marsman, J.H. and Grijpma, D.W. and Feijen, J. and Janssen, L.P.B.M. (2006) Intermolecular interactions between carbon dioxide and the carbonyl groups of polylactides and poly(ε-caprolactone). Journal of Controlled Release, 116 (2). e38-e40. ISSN 0168-3659
Dankers, Patricia Y.W. and Zhang, Zheng and Wisse, Eva and Grijpma, Dirk W. and Sijbesma, Rint P. and Feijen, Jan and Meijer, E.W. (2006) Oligo(trimethylene carbonate)-Based Supramolecular Biomaterials. Macromolecules, 39 (25). pp. 8763-8771. ISSN 0024-9297
Melchels, F.P.W. and Grijpma, D.W. and Feijen, J. (2006) Photo-crosslinking of functionalised lactide oligomers for the fabrication of osteochondral tissue engineering scaffolds. Journal of Controlled Release, 116 (2). e98-e100. ISSN 0168-3659
Buttafoco, Laura and Engbers-Buijtenhuijs, Paula and Poot, André A. and Dijkstra, Piet J. and Vermes, István and Feijen, Jan (2006) Physical characterization of vascular grafts cultured in a bioreactor. Biomaterials, 27 (11). pp. 2380-2389. ISSN 0142-9612
Buttafoco, Laura and Boks, Niels P. and Engbers-Buijtenhuijs, P. and Grijpma, Dirk W. and Poot, André A. and Dijkstra, Piet J. and Vermes, István and Feijen, Jan (2006) Porous hybrid structures based on P(DLLA-co-TMC) and collagen for tissue engineering of small-diameter blood vessels. Journal of Biomedical Materials Research, 79B (2). pp. 425-434. ISSN 0021-9304
Zweers, Miechel L.T. and Engbers, Gerard H.M. and Grijpma, Dirk W. and Feijen, Jan (2006) Release of anti-restenosis drugs from poly(ethylene oxide)-poly(dl-lactic-co-glycolic acid) nanoparticles. Journal of Controlled Release, 114 (3). pp. 317-324. ISSN 0168-3659
Zhang, Zheng and Kuijer, Roel and Bulstra, Sjoerd K. and Grijpma, Dirk W. and Feijen, Jan (2006) The in vivo and in vitro degradation behavior of poly(trimethylene carbonate). Biomaterials, 27 (9). pp. 1741-1748. ISSN 0142-9612
Zhang, Z. and Grijpma, D.W. and Feijen, J. (2006) Thermoplastic elastomers based on poly(lactide)–poly(trimethylene carbonate-co-caprolactone)–poly(lactide) triblock copolymers and their stereocomplexes. Journal of Controlled Release, 116 (2). e29-e31. ISSN 0168-3659
Zhang, Z. and Grijpma, D.W. and Feijen, J. (2006) Trimethylene carbonate-based polymers for controlled drug delivery applications. Journal of Controlled Release, 116 (2). e28-e29. ISSN 0168-3659
2005
Engbers-Buijtenhuijs, P. and Kamphuis, M. and Sluijs Veer van der, G. and Haanen, C. and Poot, A.A. and Feijen, J. and Vermes, I. (2005) A novel time resolved fluorometric assay of anoikis using Europium-labelled Annexin V in cultured adherent cells. Apoptosis, 10 (2). pp. 429-437. ISSN 1360-8185
Urmenyi, A.M. and Poot, A.A. and Wessling, M. and Mulder, M.H.V. (2005) Affinity membranes for hormone removal from aqueous solutions. Journal of Membrane Science, 259 (1-2). pp. 91-102. ISSN 0376-7388
Engbers-Buijtenhuijs, P. and Buttafoco, L. and Poot, A.A. and Geelkerken, R.H. and Feijen, J. and Vermes, I. (2005) Analysis of the Balance between Proliferation and Apoptosis of Cultured Vascular Smooth Muscle Cells for Tissue- Engineering Applications. Tissue Engineering, 110 (11-12). pp. 1631-1639. ISSN 1076-3279
Engbers-Buijtenhuijs, Paula and Buttafoco, Laura and Poot, André A. and Dijkstra, Piet J. and Vos de, Rob A.I. and Sterk, Lotus M.Th. and Geelkerken, Rob H. and Vermes, István and Feijen, Jan (2005) Biological characterisation of vascular grafts cultured in a bioreactor. Biomaterials, 27 (11). pp. 2390-2397. ISSN 0142-9612
Tan, BoonHua and Grijpma, Dirk W. and Nabuurs, Tijs and Feijen, Jan (2005) Crosslinkable surfactants based on linoleic acid-functionalized block copolymers of ethylene oxide and ε-caprolactone for the preparation of stable PMMA latices. Polymer, 46 (4). pp. 1347-1357. ISSN 0032-3861
Zhang, Zheng and Zou, Shan and Vancso, Julius and Grijpma, Dirk W. and Feijen, Jan (2005) Enzymatic Surface Erosion of Poly(trimethylene carbonate) Films Studied by Atomic Force Microscopy. Biomacromolecules, 6 (6). pp. 3404-3409. ISSN 1525-7797
Buttafoco, L. and Engbers-Buijtenhuijs, P. and Poot, A.A. and Dijkstra, P.J. and Daamen, W.F. and Kuppevelt van, T.H. and Vermes, I. and Feijen, J. (2005) First steps towards tissue engineering of small-diameter blood vessels: Preparation of flat scaffolds of collagen and elastin by means of freeze drying. Journal of Biomedical Materials Research, 79B (2). pp. 357-368. ISSN 0021-9304
Grijpma, Dirk W. and Hou, Qingpu and Feijen, Jan (2005) Preparation of biodegradable networks by photo-crosslinking lactide, ε-caprolactone and trimethylene carbonate-based oligomers functionalized with fumaric acid monoethyl ester. Biomaterials, 26 (16). pp. 2795-2802. ISSN 0142-9612
Hou, Qingpu and Grijpma, Dirk W. and Feijen, Jan (2005) Preparation of interconnected highly porous polymeric structures by a replication and freeze-drying process. Journal of Biomedical Materials Research. Part B: Applied biomaterials, 67 (2). pp. 732-740. ISSN 0021-9304
Engbers, Gerard and Poot, André and Grijpma, Dirk and Zhong, Zhiyuan and Dijkstra, Piet (2005) Professor Jan Feijen—30 years research in biomedical technology. Journal of Controlled Release, 109 (1-3). pp. 2-4. ISSN 0168-3659
Meindersma, G. Wytze and Podt, Anita (J.G.) and Haan de, André B. (2005) Selection of ionic liquids for the extraction of aromatic hydrocarbons from aromatic/aliphatic mixtures. Fuel Processing Technology, 87 (1). pp. 59-70. ISSN 0378-3820
2004
Zhang, Zheng and Grijpma, Dirk W. and Feijen, Jan (2004) Creep-resistant porous structures based on stereo-complex forming triblock copolymers of 1,3-trimethylene carbonate and lactides. Journal of Materials Science: Materials in Medicin, 15 (4). pp. 381-385. ISSN 0957-4530
Zweers, Miechel L.T. and Engbers, Gerard H.M. and Grijpma, Dirk W. and Feijen, Jan (2004) In vitro degradation of nanoparticles prepared from polymers based on DL-lactide, glycolide and poly(ethylene oxide). Journal of Controlled Release, 100 (3). pp. 347-356. ISSN 0168-3659
Deschamps, A.A. and Apeldoorn van, A.A. and Hayen, H. and Bruijn de, J.D. and Karst, U. and Grijpma, D.W. and Feijen, J. (2004) In vivo and in vitro degradation of poly(ether ester) block copolymers based on poly(ethylene glycol) and poly(butylene terephthalate). Biomaterials, 25 (2). pp. 247-258. ISSN 0142-9612
Hayen, Heiko and Deschamps, Audrey A. and Grijpma, Dirk W. and Feijen, Jan and Karst, Uwe (2004) Liquid chromatographic–mass spectrometric studies on the in vitro degradation of a poly(ether ester) block copolymer. Journal of Chromatography A, 1029 (1-2). pp. 29-36. ISSN 0021-9673
Altpeter, H. and Bevis, M.J. and Grijpma, D.W. and Feijen, J. (2004) Non-conventional injection molding of poly(lactide) and poly(ε-caprolactone) intended for orthopedic applications. Journal of materials science. Materials in medicine, 15 (2). pp. 175-184. ISSN 0957-4530
Zhang, Zheng and Grijpma, Dirk W. and Feijen, Jan (2004) Triblock Copolymers Based on 1,3-Trimethylene Carbonate and Lactide as Biodegradable Thermoplastic Elastomers. Macromolecular Chemistry and Physics, 205 (7). pp. 867-875. ISSN 1022-1352
2003
Pego, Ana Paula and Vleggeert-Lankamp, Carmen L.A.M. and Deenen, Marga and Lakke, Egbert A.J.F. and Grijpma, Dirk W. and Poot, André A. and Marani, Enrico and Feijen, Jan (2003) Adhesion and growth of human Schwann cells on trimethylene carbonate (co)polymers. Journal of Biomedical Materials Research. Part A, 67 (3). pp. 876-885. ISSN 1549-3296
Pego, Ana Paula and Poot, André A. and Grijpma, Dirk W. and Feijen, Jan (2003) Biodegradable elastomeric scaffolds for soft tissue engineering. Journal of Controlled Release, 87 (1-3). pp. 69-79. ISSN 0168-3659
Azevedo, M.C. and Reis, R.L. and Claase, M.B. and Grijpma, D.W. and Feijen, J. (2003) Development and properties of polycaprolactone/hydroxyapatite composite biomaterials. Journal of materials science. Materials in medicine, 14 (2). pp. 103-107. ISSN 0957-4530
Claase, Menno B. and Olde Riekerink, Mark B. and Bruijn de, Joost D. and Grijpma, Dirk W. and Engbers, Gerard H.M. and Feijen, Jan (2003) Enhanced Bone Marrow Stromal Cell Adhesion and Growth on Segmented Poly(ether ester)s Based on Poly(ethylene oxide) and Poly(butylene terephthalate). Biomacromolecules, 4 (1). pp. 57-63. ISSN 1525-7797
Pego, Ana Paula and Grijpma, Dirk W. and Feijen, Jan (2003) Enhanced mechanical properties of 1,3-trimethylene carbonate polymers and networks. Polymer, 44 (21). pp. 6495-6504. ISSN 0032-3861
Urmenyi, A.M. and Poot, A.A. and Wessling, M. and Mulder, M.H.V. (2003) Estradiol affinity binding complex with possible applications for municipal wastewater treatment. In: UNSPECIFIED.
Mendes, S.C. and Bezemer, J. and Claase, M.B. and Grijpma, D.W. and Bellia, G. and Degli-Innocenti, F. and Reis, R.L. and Groot de, K. and Blitterswijk van, C.A. and Bruijn de, J.D. (2003) Evaluation of Two Biodegradable Polymeric Systems as Substrates for Bone Tissue Engineering. Tissue Engineering, 9 (Suppl.). pp. 91-101. ISSN 1076-3279
Olde Riekerink, M.B. and Claase, M.B. and Engbers, G.H.M. and Grijpma, D.W. and Feijen, J. (2003) Gas plasma etching of PEO/PBT segmented block copolymer films. Journal of Biomedical Materials Research. Part A, 65 (4). pp. 417-428. ISSN 1549-3296
Zijpp, Ype J.T. and Poot, André A. and Feijen, Jan (2003) ICAM-1 and VCAM-1 expression by endothelial cells grown on fibronectin-coated TCPS and PS. Journal of Biomedical Materials Research. Part A, 65 (1). pp. 51-59. ISSN 1549-3296
Pego, A.P. and Luyn van, M.J.A. and Brouwer, L.A. and Wachem van, P.B. and Poot, A.A. and Grijpma, D.W. and Feijen, J. (2003) In vivo behavior of poly(1,3-trimethylene carbonate) and copolymers of 1,3-trimethylene carbonate with D,L-lactide or -caprolactone: Degradation and tissue response. Journal of Biomedical Materials Research. Part A, 67 (3). pp. 1044-1054. ISSN 1549-3296
Pego, Ana Paula and Zhong, Zhiyuan and Dijkstra, Pieter J. and Grijpma, Dirk W. and Feijen, Jan (2003) Influence of Catalyst and Polymerization Conditions on the Properties of 1,3-Trimethylene Carbonate and ε-Caprolactone Copolymers. Macromolecular Chemistry and Physics, 204 (5-6). pp. 747-754. ISSN 1022-1352
Deschamps, A.A. and Apeldoorn van, A.A. and Bruijn de, J.D. and Grijpma, D.W. and Feijen, J. (2003) Poly(ether ester amide)s for tissue engineering. Biomaterials, 24 (15). pp. 2643-2652. ISSN 0142-9612
Claase, Menno B. and Grijpma, Dirk W. and Mendes, Sandra C. and Bruijn de, Joost D. and Feijen, Jan (2003) Porous PEOT/PBT scaffolds for bone tissue engineering: Preparation, characterization, and in vitro bone marrow cell culturing. Journal of Biomedical Materials Research. Part A, 64A (2). pp. 291-300. ISSN 1549-3296
Hou, Qingpu and Grijpma, Dirk W. and Feijen, Jan (2003) Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique. Biomaterials, 24 (11). pp. 1937-1947. ISSN 0142-9612
Gottenbos, Bart and Mei van der, Henny C. and Klatter, Flip and Grijpma, Dirk W. and Feijen, Jan and Nieuwenhuis, Paul and Busscher, Henk J. (2003) Positively charged biomaterials exert antimicrobial effects on gram-negative bacilli in rats. Biomaterials, 24 (16). pp. 2707-2710. ISSN 0142-9612
Daamen, W.F. and Moerkerk van, H.Th.B and Hafmans, T. and Buttafoco, L. and Poot, A.A. and Veerkamp, J.H. and Kuppevelt van, T.H. (2003) Preparation and evaluation of molecularly-defined collagen-elastin-glycosaminoglycan scaffolds for tissue engineering. Biomaterials, 24 (22). pp. 4001-4009. ISSN 0142-9612
Pego, A.P. and Siebum, B. and Luyn van, M.J.A. and Gallego y Van Seijen, X.J. and Poot, A.A. and Grijpma, D.W. and Feijen, J. (2003) Preparation of Degradable Porous Structures Based on 1,3-Trimethylene Carbonate and D,L-Lactide (Co)polymers for Heart Tissue Engineering. Tissue Engineering, 9 (5). pp. 981-994. ISSN 1076-3279
Zweers, Miechel L.T. and Grijpma, Dirk W. and Engbers, Gerard H.M. and Feijen, Jan (2003) The preparation of monodisperse biodegradable polyester nanoparticles with a controlled size. Journal of Biomedical Materials Research. Part B: Applied biomaterials, 66 (2). pp. 559-566. ISSN 0021-9304
2002
Dijkhuizen-Radersma van, R. and Peters, F.L.A.M.A. and Stienstra, N.A. and Grijpma, D.W. and Feijen, J. and Groot de, K. and Bezemer, J.M. (2002) Control of vitamin B12 release from poly(ethylene glycol)/poly(butylene terephthalate) multiblock copolymers. Biomaterials, 23 (6). pp. 1527-1536. ISSN 0142-9612
Deschamps, Audrey A. and Claase, Menno B. and Sleijster, Warnerie J. and Bruijn de, Joost D. and Grijpma, Dirk W. and Feijen, Jan (2002) Design of segmented poly(ether ester) materials and structures for the tissue engineering of bone. Journal of Controlled Release, 78 (1-3). pp. 175-186. ISSN 0168-3659
Grijpma, Dirk W. and Altpeter, Hanno and Bevis, Michael J. and Feijen, Jan (2002) Improvement of the mechanical properties of poly(D,L-lactide) by orientation. Polymer International, 51 (10). pp. 845-851. ISSN 0959-8103
Pego, Ana Paula and Poot, André A. and Grijpma, Dirk W. and Feijen, Jan (2002) In Vitro Degradation of Trimethylene Carbonate Based (Co)polymers. Macromolecular Bioscience, 2 (9). pp. 411-419. ISSN 1616-5187
Kellomäki, M. and Paasimaa, S. and Grijpma, D.W. and Kolppo, K. and Törmälä, P. (2002) In vitro degradation of Polyactive® 1000PEOT70PBT30 devices. Biomaterials, 23 (1). pp. 283-295. ISSN 0142-9612
Hou, Qingpu and Grijpma, Dirk W. and Feijen, Jan (2002) Preparation of Porous Poly(ε-caprolactone) Structures. Macromolecular Rapid Communications, 23 (4). pp. 247-252. ISSN 1022-1336
2001
Wissink, M.J.B. and Beernink, R. and Pieper, J.S. and Poot, A.A. and Engbers, G.H.M. and Beugeling, T. and Aken van, W.G. and Feijen, J. (2001) Binding and release of basic fibroblast growth factor from heparinized collagen matrices. Biomaterials, 22 (16). pp. 2291-2299. ISSN 0142-9612
Wissink, M.J.B. and Beernink, R. and Pieper, J.S. and Poot, A.A. and Engbers, G.H.M. and Beugeling, T. and Aken van, W.G. and Feijen, J. (2001) Immobilization of heparin to EDC/NHS-crosslinked collagen. Characterization and in vitro evaluation. Biomaterials, 22 (2). pp. 151-163. ISSN 0142-9612
Wachem van, P.B. and Plantinga, J.A. and Wissink, M.J.B. and Beernink, R. and Poot, A.A. and Engbers, G.H.M. and Beugeling, T. and Aken van, W.G. and Feijen, J. and Luyn van, M.J.A. (2001) In vivo biocompatibility of carbodiimide-crosslinked collagen matrices: Effects of crosslink density, heparin immobilization, and bFGF loading. Journal of Biomedical Materials Research, 55 (3). pp. 368-378. ISSN 0021-9304
Deschamps, Audrey A. and Grijpma, Dirk W. and Feijen, Jan (2001) Poly(ethylene oxide)/poly(butylene terephthalate) segmented block copolymers: the effect of copolymer composition on physical properties and degradation behavior. Polymer, 42 (23). pp. 9335-9345. ISSN 0032-3861
Wissink, M.J.B. and Beernink, R. and Poot, A.A. and Engbers, G.H.M. and Beugeling, T. and Aken van, W.G. and Feijen, Jan (2001) Relation between cell density and the secretion of von Willebrand factor and prostacyclin by human umbilical vein endothelial cells. Biomaterials, 22 (16). pp. 2283-2290. ISSN 0142-9612
Papadaki, Maria and Mahmood, Tahir and Gupta, Pavan and Claase, Menno B. and Grijpma, Dirk W. and Riesle, Jens and Blitterswijk van, Clemens A. and Langer, Robert (2001) The different behaviors of skeletal muscle cells and chondrocytes on PEGT/PBT block copolymers are related to the surface properties of the substrate. Journal of Biomedical Materials Research, 54 (1). pp. 47-58. ISSN 0021-9304
2000
Bezemer, J.M. and Oude Weme, P. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (2000) Amphiphilic poly(ether ester amide) multiblock copolymers as biodegradable matrices for the controlled release of proteins. Journal of Biomedical Materials Research, 52 (1). pp. 8-17. ISSN 1549-3296
Bezemer, J.M. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (2000) Control of protein delivery from amphiphilic poly(ether ester) multiblock copolymers by varying their water content using emulsification techniques. Journal of Controlled Release, 66 (2-3). pp. 307-320. ISSN 0168-3659
Wissink, M.J.B. and Beernink, R. and Scharenborg, N.M. and Poot, A.A. and Engbers, G.H.M. and Beugeling, T. and Aken van, W.G. and Feijen, J. (2000) Endothelial cell seeding of (heparinized) collagen matrices: effects of bFGF pre-loading on proliferation (after low density seeding) and pro-coagulant factors. Journal of Controlled Release, 67 (2-3). pp. 141-155. ISSN 0168-3659
Wissink, M.J.B. and Beernink, R. and Poot, A.A. and Engbers, G.H.M. and Beugeling, T. and Aken van, W.G. and Feijen, J. (2000) Improved endothelialization of vascular grafts by local release of growth factor from heparinized collagen matrices. Journal of Controlled Release, 64 (1-3). pp. 103-114. ISSN 0168-3659
Dunnen den, W.F.A. and Meek, M.F. and Grijpma, D.W. and Robinson, P.H. and Schakenraad, J.M. (2000) In vivo and in vitro degradation of poly[50/50 (85/15L/D)LA/ε-CL], and the implications for the use in nerve reconstruction. Journal of Biomedical Materials Research, 51 (4). pp. 575-585. ISSN 1549-3296
Bezemer, J.M. and Radersma van, R. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (2000) Microspheres for protein delivery prepared from amphiphilic multiblock copolymers: 1. Influence of preparation techniques on particle characteristics and protein delivery. Journal of Controlled Release, 67 (2-3). pp. 233-248. ISSN 0168-3659
Bezemer, J.M. and Radersma van, R. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (2000) Microspheres for protein delivery prepared from amphiphilic multiblock copolymers: 2. Modulation of release rate. Journal of Controlled Release, 67 (2-3). pp. 249-260. ISSN 0168-3659
Bezemer, J.M. and Radersma, R. and Grijpma, D.W. and Dijkstra, P.J. and Feijen, J. and Blitterswijk van, C.A. (2000) Zero-order release of lysozyme from poly(ethylene glycol)/poly(butylene terephthalate) matrices. Journal of Controlled Release, 64 (1-3). pp. 179-192. ISSN 0168-3659
1999
Bezemer, J.M. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (1999) A controlled release system for proteins based on poly(ether ester) block-copolymers: polymer network characterization. Journal of Controlled Release, 62 (3). pp. 393-405. ISSN 0168-3659
Bos, Gert W. and Scharenborg, Nicole M. and Poot, André A. and Engbers, Gerard H.M. and Beugeling, Tom and Aken van, Willem G. and Feijen, Jan (1999) Blood compatibility of surfaces with immobilized albumin-heparin conjugate and effect of endothelial cell seeding on platelet adhesion. Journal of Biomedical Materials Research, 47 (3). pp. 279-291. ISSN 1549-3296
Bos, Gert W. and Scharenborg, Nicole M. and Poot, André A. and Engbers, Gerard H.M. and Beugeling, Tom and Aken van, Willem G. and Feijen, Jan (1999) Proliferation of endothelial cells on surface-immobilized albumin-heparin conjugate loaded with basic fibroblast growth factor. Journal of Biomedical Materials Research, 44 (3). pp. 330-340. ISSN 1549-3296
1998
Bos, Gert W. and Scharenborg, Nicole M. and Poot, André A. and Engbers, Gerard H.M. and Terlingen, Johannes G.A. and Beugeling, Tom and Aken van, Willem G. and Feijen, Jan (1998) Adherence and Proliferation of Endothelial Cells on Surface-Immobilized Albumin-Heparin Conjugate. Tissue Engineering, 4 (3). pp. 267-279. ISSN 1076-3279
Bos, Gerrit Willem (1998) Albumin-heparin matrices loaded with growth factor as substrates for endothelial cell seeding. thesis.
Imbert, E. and Poot, A.A. and Figdor, C.G. and Feijen, J. (1998) Different growth behaviour of human umbilical vein endothelial cells and an endothelial cell line seeded on various polymer surfaces. Biomaterials, 19 (24). pp. 2285-2290. ISSN 0142-9612
1996
Turbill, P. and Beugeling, T. and Poot, A.A. (1996) Proteins involved in the Vroman effect during exposure of human blood plasma to glass and polyethylene. Biomaterials, 17 (13). pp. 1279-1287. ISSN 0142-9612
1993
Dekker, A. and Beugeling, T. and Poot, A. and Spijkers, J. and Mourik van, J.A. and Feijen, J. and Bantjes, A. and Aken van, W.G. (1993) The role of cellular fibronectin in the interaction of human endothelial cells with polymers. Clinical Materials, 13 (1-4). pp. 101-107. ISSN 0267-6605
1992
Poot, A. and Beugeling, T. and Dekker, A. and Spijkers, J. and Mourik van, J.A. and Feijen, J. and Bantjes, A. and Aken van, W.G. (1992) Dependence of endothelial cell growth on substrate-bound fibronectin. Clinical Materials, 11 (1-4). pp. 151-155. ISSN 0267-6605
1990
Poot, A. and Beugeling, T. and Aken van, W.G. and Bantjes, A. (1990) Detection of surface-adsorbed (lipo)proteins by means of a two-step enzyme-immunoassay: a study on the Vroman effect. Journal of Biomedical Materials Research, 24 (8). pp. 1021-1036. ISSN 0021-9304
1988
Poot, A. and Beugeling, T. and Cazenave, J.P. and Bantjes, A. and Aken van, W.G. (1988) Platelet deposition in a capillary perfusion model: quantitative and morphological aspects. Biomaterials, 9 (2). pp. 126-132. ISSN 0142-9612
