Research Group: Applied Mechanics (AM)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Number of items: 621.

Article

Wisselink, H.H. and Huetink, J. (2004) 3D FEM simulation of stationary metal forming processes with applications to slitting and rolling. Journal of Materials Processing Technology, 148 (3). pp. 328-341. ISSN 0924-0136

Selman, A. and Merrouche, A. and Knopf-Lenoir, C. (2001) 3D mesh refinement procedure using the bisection and rivara algorithms with mesh quality assessment. Revue Europeenne des Elements Finis, REEF .

Niazi, M.S. and Meinders, V.T. and Wisselink, H.H. and Horn, C.H.L.J. ten and Klaseboer, G. and Boogaard, A.H. van den (2013) A Plasticity Induced Anisotropic Damage Model for Sheet Forming Processes. Key engineering materials, 554-557 . 1245 - 1251. ISSN 1013-9826

Huisman, H.J. and Huetink, J. (1985) A combined eulerian-lagrangian three-dimensional finite-element analysis of edge-rolling. Journal of Mechanical Working Technology, 11 (3). pp. 333-353. ISSN 0378-3804

Quak, W. and Boogaard, A.H. van den and Gonzalez, D. and Cueto, E. (2011) A comparative study on the performance of meshless approximations and their integration. Computational Mechanics, 48 (2). pp. 121-137. ISSN 0178-7675

Karupannasamy, D.K. and Hol, J. and Rooij, M.B. de and Meinders, V.T. and Schipper, D.J. (2014) A friction model for loading and reloading effects in deep drawing process. Wear, 318 (1-2). 27 - 39. ISSN 0043-1648

Datta, K. and Delhez, R. and Bronsveld, P.M. and Beyer, J. and Geijselaers, H.J.M. and Post, J. (2009) A low-temperature study to examine the role of epsilon-martensite during strain-induced transformations in metastable austenitic stainless steels. Acta Materialia, 57 . 3321 - 3326. ISSN 1359-6454

Post, J. and Datta, K. and Beyer, J. (2008) A macroscopic constitutive model for a metastable austenitic stainless steel. Materials Science and Engineering A: Structural materials, 485 (1-2). pp. 290-298. ISSN 0025-5416

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2012) A macroscopic model to simulate the mechanically induced martensitic transformation in metastable austenitic stainless steels. Acta materialia, 60 (11). 4409 - 4419. ISSN 1359-6454

Hadoush, A. and Boogaard, A.H. van den and Emmens, W.C. (2011) A numerical investigation of the continuous bending under tension test. Journal of Materials Processing Technology, 211 (12). 1948 - 1956. ISSN 0924-0136

Jong, J.A. de and Wijnant, Y.H. and Boer, A. de (2014) A one-dimensional heat transfer model for parallel-plate thermoacoustic heat exchangers. Journal of the Acoustical Society of America, 135 . 1149 - 1158. ISSN 0001-4966

Vegter, H. and Boogaard, A.H. van den (2006) A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states. International Journal of Plasticity, 22 (3). pp. 557-580. ISSN 0749-6419

Geijselaers, H.J.M. and Huetink, J. (2003) A second order discontinuous Galerkin method for advection on unstructured triangular meshes keywords: advection convection discontinuous galerkin finite elements. Communications in Numerical Methods in Engineering, 19 (4). pp. 275-284. ISSN 1069-8299

Meinders, T. and Konter, A.W.A. and Meijers, S.E. and Atzema, E.H. and Kappert, H. (2006) A sensitivity analysis on the springback behavior of the Unconstrained Bending Problem. International Journal of Forming Processes, 9 (3). pp. 365-402. ISSN 1292-7775

Berkhoff, A.P. (2012) A technique for improved stability of adaptive feedforward controllers without detailed uncertainty measurements. Smart materials & structures, 21 (6). 064003 - 064003. ISSN 0964-1726

Emmens, W.C. and Boogaard, A.H. van den (2014) A yield criterion based on mean shear stress. Key engineering materials, 611-612 . 3 - 10. ISSN 1013-9826

Oosterhout, G.M. and Hoogt, P.J.M. van der and Spiering, R.M.E.J. (1995) Accurate calculation methods for natural frequencies of plates with special attention to the higher modes. Journal of Sound and Vibration, 183 (1). pp. 33-47. ISSN 0022-460X

Mulder, J. and Vegter, H. and Aretz, H. and Boogaard, A.H. van den (2013) Accurate evaluation method for the hydraulic bulge test. Key engineering materials, 554-557 . 33 - 40. ISSN 1013-9826

Arora, V. and Wijnant, Y.H. and Boer, A. de (2014) Acoustic-based damage detection method. Applied acoustics, 80 . 23 - 27. ISSN 0003-682X

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Adaptive numerical analysis of wrinkling in sheet metal forming. International journal of forming processes, 6 (1). pp. 87-102. ISSN 1292-7775

Lof, J. and Boogaard, A.H. van den (2001) Adaptive return mapping algorithms for J2 elasto-viscoplastic flow. International Journal for Numerical Methods in Engineering, 51 (11). pp. 1283-1298. ISSN 0029-5981

Burchitz, I. and Meinders, T. (2007) Adaptive through-thickness integration for accurate springback prediction. International Journal for Numerical Methods in Engineering, 75 (5). pp. 533-554. ISSN 0029-5981

Hol, J. and Cid Alfaro, M.V. and Meinders, V.T. and Huetink, J. (2011) Advanced friction modeling in sheet metal forming. Key Engineering Materials, 473 . 715 - 722. ISSN 1013-9826

Beltman, W.M. and Hoogt, P.J.M. van der and Spiering, R.M.E.J. and Tijdeman, H. (1997) Air loads on a rigid plate oscillating normal to a fixed surface. Journal of Sound and Vibration, 206 (2). pp. 217-241. ISSN 0022-460X

Berg, Peter van den and Borst, Rene de and Huetink, Han (1996) An Eulerean finite element model for penetration in layered soil. International Journal for Numerical and Analytical Methods in Geomechanics, 20 (12). pp. 865-886. ISSN 0363-9061

Mooi, H.G. and Koenis, P.T.G. and Huetink, J. (1999) An effective split of flow and die deformation calculations of aluminium extrusion. Journal of Materials Processing Technology, 88 (1-3). pp. 67-76. ISSN 0924-0136

Kampinga, W.R. and Wijnant, Y.H. and Boer, A. de (2011) An efficient finite element model for viscothermal acoustics. Acta Acustica United with Acustica, 97 (4). 618 - 631. ISSN 1610-1928

Wind, J.W. and Boer, A. de and Ellenbroek, M.H.M. (2010) An efficient planar inverse acoustic method based on Toeplitz matrices. Acta Acustica United with Acustica, 97 (1). pp. 128-137. ISSN 1610-1928

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2008) An optimisation strategy for industrial metal forming processes. Structural and Multidisciplinary Optimization, 35 (6). pp. 571-586. ISSN 1615-147X

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Hoogt, P.J.M. van der and Boer, A. de (2009) An optimization method for dynamics of structures with repetitive component patterns. Structural and Multidisciplinary Optimization, 39 (6). 557 - 567. ISSN 1615-147X

Emmens, W.C. and Boogaard, A.H. van den (2009) An overview of stabilizing deformation mechanisms in incremental sheet forming. Journal of Materials Processing Technology, 209 (8). pp. 3688-3695. ISSN 0924-0136

Kampinga, W.R. and Wijnant, Y.H. and Boer, A. de (2008) Analysetools voor akoestiek in zeer kleine geometrieën = Tools for acoustic analysis of very small geometries. NAG Journaal (186). ISSN 1571-4233

Homborg, A.M. and Westing, E.P.M. van and Tinga, T. and Ferrari, G.M. and Zhang, X. and Wit, J.H.W. de and Mol, J.M.C. (2013) Application of transient analysis using Hilbert spectra of electrochemical noise to the identification of corrosion inhibition. Electrochimica acta, 116 . 355 - 365. ISSN 0013-4686

Parlapalli, M.S.R. and Shu, Dongwei and Chai, Gin B. (2008) Buckling of composite beams with two enveloped delaminations: Lower and upper bounds. Computers & Structures, 86 (23-24). pp. 2155-2165. ISSN 0045-7949

Langkruis, J. van de and Lof, J. and Kool, W.H. and Zwaag, S. van der and Huetink, J. (2000) Comparison of experimental AA6063 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model. Computational Materials Science, 18 (3-4). pp. 381-392. ISSN 0927-0256

Vegter, H. and Horn, Carel H.L.J. ten and An, Y. and Atzema, E.H. and Pijlman, H.H. and Boogaard, A.H. van den and Huetink, J. (2006) Comportamento pl'astico do material: um dado importante para prever a estampagem de chapas. Corte & conformacao de metais, 12 . pp. 50-69. ISSN 1808-351X

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2009) Constitutive modeling of metastable austenitic stainless steel. International Journal of Material Forming, 2 (Suppl.). pp. 419-422. ISSN 1960-6206

Perdahcioglu, E. Semih and Geijselaers, Hubert J.M. (2010) Constitutive modeling of two phase materials using the Mean Field method for homogenization. International Journal of Material Forming, 4 (2). pp. 93-102. ISSN 1960-6206

Emmens, W.C. and Boogaard, A.H. van den (2010) Contact effects in bending affecting stress and formability. International journal of material forming, 3 (1). pp. 1159-1162. ISSN 1960-6206

Akcay-Perdahcioglu, D. and Doreille, M. and Boer, A. de and Ludwig, T. (2013) Coupling of non-conforming meshes in a component mode synthesis method. International journal for numerical methods in engineering, 96 (6). 390 - 404. ISSN 0029-5981

Emmens, W.C. and Boogaard, A.H. van den (2011) Cyclic stretch-bending: mechanics, stability and formability. Journal of Materials Processing Technology, 211 (12). 1965 - 1981. ISSN 0924-0136

Kitting, D. and Ofenheimer, A. and Boogaard, A.H. van den and Dietmaier, P. (2013) Deformation scenarios of combined stretching and bending in complex shaped deep drawing parts. Key engineering materials, 554 - 557 . 1252 - 1264. ISSN 1013-9826

Beltman, W.M. (1996) Demping van dubbelwandige panelen. NAG Journaal (131). ISSN 1571-4233

Dikmen, Emre and Hoogt, Peter J.M. van der and Boer, André de and Aarts, Ronald G.K.M. and Jonker, Ben (2011) Design of an Experimental Setup for Testing Multiphysical Effects on High Speed Mini Rotors. Jounal of Mechanical Design, 133 (5). ISSN 1050-0472

Mulder, J. and Vegter, H. and Ha, J.J. and Boogaard, A.H. van den (2012) Determination of flow curves under equibiaxial stress conditions. Key engineering materials, 504-506 . 53 - 58. ISSN 1013-9826

Bonte, M.H.A. and Boer, A. de and Liebregts, R. (2007) Determining the von Mises stress power spectral density for frequency domain fatigue analysis including out-of-phase stress components. Journal of Sound and Vibration, 302 (1-2). pp. 379-386. ISSN 0022-460X

Wind, J.W. and Akçay Perdahcıoğlu, D. and Boer, A. de (2007) Distributed multilevel optimization for complex structures. Structural and Multidisciplinary Optimization, 36 (1). pp. 71-81. ISSN 1615-147X

Boogaard, A.H. van den and Wisselink, H.H. and Huetink, J. (2005) Do Advanced Material Models Contribute to Accuracy in Industrial Sheet Forming Simulations? Advanced Materials Research, 6-8 . pp. 71-80. ISSN 1662-8985

Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Ellenbroek, M.H.M. and Boer, A. de (2012) Dynamic substructuring and reanalysis methods in a surrogate based design optimization environment. Structural and multidisciplinary optimization, 45 . 129 - 138. ISSN 1615-147X

Wiebenga, J.H. and Atzema, E.H. and An, Y.G. and Vegter, H. and Boogaard, A.H. van den (2014) Effect of material scatter on the plastic behavior and stretchability in sheet metal forming. Journal of materials processing technology, 214 (2). 238 - 252. ISSN 0924-0136

Kurukuri, S. and Miroux, A. and Ghosh, M. and Boogaard, A.H. van den (2009) Effect of temperature on anisotropy in forming simulations of aluminum alloys. International Journal of Material Forming, 2 (Suppl.). 387 - 390. ISSN 1960-6206

Boogaard, A.H. van den and Meinders, T. and Huetink, J. (2003) Efficient implicit finite element analysis of sheet forming processes. International Journal for Numerical Methods in Engineering, 56 (8). pp. 1083-1107. ISSN 0029-5981

Hadoush, A. and Boogaard, A.H. van den (2012) Efficient implicit simulation of incremental sheet forming. International journal for numerical methods in engineering, 90 (5). 597 - 612. ISSN 0029-5981

Lof, J. (2001) Elasto-viscoplastic FEM simulations of the aluminium flow in the bearing area for extrusion of thin-walled sections. Journal of Materials Processing Technology, 114 (2). pp. 174-183. ISSN 0924-0136

Slakhorst, J.W.H.G. and Bouwhuijs, M.J. (1977) Electron microscopy observations of the morphology of plane-strain deformed copper. Scripta Metallurgica, 11 (11). pp. 947-952. ISSN 0036-9748

Lobo-Prat, Joan and Keemink, Arvid Q.L. and Stienen, Arno H.A. and Schouten, Alfred C. and Veltink, Peter H. and Koopman, Bart F.J.M. (2014) Evaluation of EMG, force and joystick as control interfaces for active arm supports. Journal of neuroengineering and rehabilitation, 11 (68). ISSN 1743-0003

Noman, M. and Clausmeyer, T. and Barthel, C. and Svendsen, B. and Huetink, J. and Riel, M. van (2010) Experimental characterization and modeling of the hardening behavior of the sheet steel LH800. Materials Science and Engineering A: Structural materials . ISSN 0025-5416

Clausmeyer, T. and Gerstein, G. and Bargmann, S. and Svendsen, B. and Boogaard, A.H. van den and Zillmann, B. (2013) Experimental characterization of microstructure development during loading path changes in bcc sheet steels. Journal of materials science, 48 (2). 674 - 689. ISSN 0022-2461

Post, J. and Nolles, H. and Datta, K. and Geijselaers, H.J.M. (2008) Experimental determination of the constitutive behaviour of a metastable austenitic stainless steel. Materials Science and Engineering A: Structural materials, 498 (1-2). pp. 179-190. ISSN 0025-5416

Boogaard, A.H. van den and Carleer, B.D. and Atzema, E.H. and Wijlen, E.V. ter (2008) Experimental validation of numerical sensitivities in a deep drawing simulation. International Journal of Material Forming . ISSN 1960-6206

Eerden, F.J.M. van der and Bree, H.E. de and Tijdeman, H. (1998) Experiments with a new acoustic particle velocity sensor in an impedance tube. Sensors and Actuators A: Physical, 69 (2). pp. 126-133. ISSN 0924-4247

Lof, J. and Blokhuis, Y. (2002) FEM simulations of the extrusion of complex thin-walled aluminium sections. Journal of Materials Processing Technology, 122 (2-3). pp. 344-354. ISSN 0924-0136

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Huetink, J. (2012) Failure Predictions for DP Steel Cross-die Test Using Anisotropic Damage. International journal of damage mechanics, 21 . 713 - 754. ISSN 1530-7921

Geijselaers, Hubert J. M. and Koning, Annette J. E. (2000) Finite Element Analysis of Thermoelastic Instability With Intermittent Contact. Journal of Tribology, 122 (1). pp. 42-46. ISSN 0742-4787

Vreede, P.T. and Carleer, B.D. and Louwes, M.F.M. and Huetink, J. (1995) Finite-element simulation of sheet-forming processes with the help of contact elements on small-scale workstations. Journal of Materials Processing Technology, 50 (1-4). pp. 264-276. ISSN 0924-0136

Dikmen, Emre and Hoogt, Peter J.M. van der and Boer, André de and Aarts, Ronald G.K.M. and Jonker, Ben (2013) Flow Induced Instability on High Speed Mini Rotors in Laminar Flow. Journal of Vibration and Acoustics, 135 (2). 024502-1. ISSN 1048-9002

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2008) Flow front tracking in ALE/Eulerian formulation FEM simulations of aluminium extrusion. Key Engineering Materials, 367 . pp. 39-46. ISSN 1013-9826

Emmens, W.C. and Boogaard, A.H. van den (2011) Formability in incremental sheet forming and cyclic stretch-bending. Steel Research International . 513 - 518. ISSN 1611-3683

Wit, A.J. de and Akcay-Perdahcioglu, D. and Brink, W.M. van den and Boer, A. de (2012) Generic Linking of Finite Element Models for non-linear static and global dynamic analyses of aircraft structures. Computers, materials & continua, 32 (3). 201 - 218. ISSN 1546-2226

Burchitz, Igor and Boesenkool, Roel and Zwaag, Sybrand van der and Tassoul, Marc (2005) Highlights of designing with Hylite - a new material concept. Materials & Design, 26 (4). pp. 271-279. ISSN 0264-1275

Arora, Vikas and Hoogt, P.J.M. van der and Aarts, R.G.K.M. and Boer, A. de (2011) Identification of stiffness and damping characteristics of axial air-foil bearings. International Journal of Mechanics and Materials in Design . ISSN 1569-1713

Beltman, W.M. and Hoogt, P.J.M. van der and Spiering, R.M.E.J. and Tijdeman, H. (1998) Implementation and experimental validation of a new viscothermal acoustic finite element for acousto-elastic problems. Journal of Sound and Vibration, 216 (1). pp. 159-185. ISSN 0022-460X

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Improvement of implicit finite element code performance in deep drawing simulations by dynamics contributions. Journal of Materials Processing Technology, 134 (3). pp. 413-420. ISSN 0924-0136

Emmens, W.C. and Boogaard, A.H. van den (2009) Incremental forming by continuous bending under tension - an experimental investigation. Journal of Materials Processing Technology, 209 (14). 5456 - 5463. ISSN 0924-0136

Emmens, W.C. and Boogaard, A.H. van den (2009) Incremental sheet forming analysed by tensile tests. Key Engineering Materials, 410-41 . 347 - 354. ISSN 1013-9826

Fictorie, E. and Boogaard, A.H. van den and Atzema, E.H. (2010) Influence of Punch Radius in a Nakazima Test for Mild Steel and Aluminium. International Journal of Material Forming, 3 (Suppl. 1). 1179 - 1182. ISSN 1960-6206

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, J. and Gaymans, R.J. (2005) Influence of copolymerisation on fracture behaviour of aliphatic polyketones. Polymer, 46 (6). pp. 1921-1934. ISSN 0032-3861

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, H.J. and Gaymans, R.J. (2003) Influence of molecular weight on the fracture properties of aliphatic polyketone terpolymers. Polymer, 44 (20). pp. 6361-6370. ISSN 0032-3861

Perdahcıoğlu, E.S. and Geijselaers, H.J.M. and Groen, M. (2008) Influence of plastic strain on deformation-induced martensitic transformations. Scripta Materialia, 58 (11). pp. 947-950. ISSN 1359-6462

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2005) Influence of sample thickness on fracture behaviour of a polyketone and a polyketone-rubber blend. Polymer, 46 (23). pp. 10321-10330. ISSN 0032-3861

Perdahcıoğlu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Influence of stress state and strain path on deformation induced martensitic transformations. Materials Science and Engineering A: Structural materials, 481-48 (1-2). pp. 727-731. ISSN 0025-5416

Pulnikov, A. and Permiakov, V. and Petrov, R. and Gyselinck, J. and Langelaan, G. and Wisselink, H. and Dupre, L. and Houbaert, Y. and Melkebeek, J. (2004) Investigation of residual stresses by means of local magnetic measurement. Journal of Magnetism and Magnetic Materials, 272-27 (3). pp. 2303-2304. ISSN 0304-8853

Beltman, W.M. and Shepherd, J.E. (2002) Linear elastic response of tubes to internal detonation loading. Journal of Sound and Vibration, 252 (4). pp. 617-655. ISSN 0022-460X

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Boogaard, A.H. van den (2013) Material Induced Anisotropic Damage in DP600. International journal of damage mechanics, 22 (7). 1039 - 1070. ISSN 1530-7921

Emmens, W.C. and Boogaard, A.H. van den (2012) Material characterization at high strain by adapted tensile tests. Experimental mechanics, 52 (8). 1195 - 1209. ISSN 0014-4851

Kuipers, E.R. and Wijnant, Y.H. and Boer, A. de (2014) Measuring sound absorption: considerations on the measurement of the active acoustic power. Acta acustica united with Acustica, 100 (2). 193 - 204. ISSN 1610-1928

Assaad, W. and Geijselaers, H.J.M. and Nilsen, K.E. (2009) Measuring the Deformation of a Flat Die by Applying a Laser Beam on a Reflecting Surface. Key Engineering Materials, 424 . 197 - 204. ISSN 1013-9826

Snippe, Q.H.C. and Meinders, T. (2011) Mechanical experiments on the superplastic material ALNOVI-1, including leak information. Materials Science and Engineering A: Structural materials, 528 (3). pp. 950-960. ISSN 0025-5416

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2004) Mechanical properties of polyketone terpolymer/rubber blends. Polymer, 45 . pp. 3765-3779. ISSN 0032-3861

Geijselaers, H.J.M. and Perdahcioglu, E.S. (2009) Mechanically induced martensitic transformation as a stress-driven process. Scripta Materialia, 60 (1). 29 - 31. ISSN 1359-6462

Quak, W. and Boogaard, A.H. van den and Huetink, J. (2009) Meshless methods and forming processes. International Journal of Material Forming, 2 (Suppl.). 585 - 588. ISSN 1960-6206

Boogaard, A. van den and Bolt, P. and Werkhoven, R. (2001) Modeling of AlMg Sheet Forming at Elevated Temperatures. International journal of forming processes, 4 (3-4). pp. 361-375. ISSN 1292-7775

Bekke, D.A. and Wijnant, Y.H. and Boer, A. de (2010) Modelling and evaluating interior tire-road noise. NAG Journaal, 9 . ISSN 1571-4233

Carleer, B.D. and Vreede, P.T. and Louwes, M.F.M. and Huetink, J. (1994) Modelling drawbeads with finite elements and verification. Journal of Materials Processing Technology, 45 (1-4). pp. 63-68. ISSN 0924-0136

Wisselink, H.H. and Klaseboer, G. and Huetink, H. (2009) Modelling of a burr-free blanking process. International journal of material forming, 2 (Suppl.). pp. 539-542. ISSN 1960-6206

Hol, J.D. and Meinders, V.T. and Rooij, M.B. de and Boogaard, A.H. van den (2015) Multi-scale friction modeling for sheet metal forming: the boundary lubrication regime. Tribology international, 81 . 112 - 128. ISSN 0301-679X

Post, J. and Klaseboer, G. and Stinstra, E. and Amstel, T. van and Huetink, J. (2009) Multi-stage metal forming: Variation and transformation. Journal of Materials Processing Technology, 209 (5). pp. 2648-2661. ISSN 0924-0136

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2004) Notch sensitivity of aliphatic polyketone terpolymers. Journal of Applied Polymer Science, 91 (4). pp. 2558-2575. ISSN 0021-8995

Meinders, T. and Perdahcioglu, E.S. and Riel, M. van and Wisselink, H.H. (2007) Numerical modeling of advanced materials. International Journal of Machine Tools and Manufacture, 48 (5). pp. 485-498. ISSN 0890-6955

Meinders, T. and Burchitz, I.A. and Bonte, M.H.A. and Lingbeek, R.A. (2007) Numerical product design: Springback prediction, compensation and optimization. International Journal of Machine Tools and Manufacture, 48 (5). pp. 499-514. ISSN 0890-6955

Basten, T.G.H. and Hoogt, P.J.M. van der and Spiering, R.M.E.J. and Tijdeman, H. (2001) On the acousto-elastic behaviour of double-wall panels with a viscothermal air layer. Journal of Sound and Vibration, 243 (4). pp. 699-719. ISSN 0022-460X

Wang, J. and Levkovitch, V. and Reusch, F. and Svendsen, B. and Huetink, J. and Riel, M. van (2008) On the modeling of hardening in metals during non-proportional loading. International Journal of Plasticity, 24 (6). pp. 1039-1070. ISSN 0749-6419

Hadoush, A. and Boogaard, A.H. van den (2009) On the performance of substructuring implicit simulation of single point incremental forming. International Journal of Material Forming, 2 (Suppl. 1). pp. 559-562. ISSN 1960-6206

Spiering, Vincent L. and Bouwstra, Siebe and Spiering, Ruud M.E.J. (1993) On-chip decoupling zone for package-stress reduction. Sensors and Actuators A: Physical, 39 (2). pp. 149-157. ISSN 0924-4247

Bonte, Martijn H.A. and Fourment, Lionel and Do, Tien-tho and Boogaard, A.H. van den and Huetink, J. (2010) Optimization of forging processes using Finite Element simulations : A comparison of Sequential Approximate Optimization and other algorithms. Structural and Multidisciplinary Optimization, 42 (5). 797 - 810. ISSN 1615-147X

Kampinga, W.R. and Wijnant, Y.H. and Boer, A. de (2010) Performance of several viscothermal acoustic finite elements. Acta Acustica United with Acustica, 96 (1). 115 - 124. ISSN 1610-1928

Clausmeyer, Till and Boogaard, Ton van den and Noman, Mohammad and Gershteyn, Gregoriy and Schaper, Mirko and Svendsen, Bob and Bargmann, Swantje (2011) Phenomenological modeling of anisotropy induced by evolution of the dislocation structure on the macroscopic and microscopic scale. International Journal of Material Forming, 4 (2). pp. 141-154. ISSN 1960-6206

Tinga, T. (2013) Physics of Failure and its Role in Maintenance. Maintworld, 2013 (1). 32 - 35.

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Hatscher, A. and Meinders, V.T. and Boogaard, A.H. van den (2014) Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties. Journal of materials processing technology, 214 (6). 1211 - 1227. ISSN 0924-0136

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2007) Pre-yield tensile set of a semi-crystalline polymer, its blend and composite. Journal of Materials Science, 42 (12). pp. 4131-4135. ISSN 0022-2461

Tinga, T. (2013) Predictive maintenance of military systems based on physical failure models. Chemical engineering transactions, 33 . 295 - 300. ISSN 1974-9791

Wiebenga, J.H. and Weiss, M. and Rolfe, B. and Boogaard, A.H. van den (2013) Product defect compensation by robust optimization of a cold roll forming process. Journal of materials processing technology, 213 . 978 - 986. ISSN 0924-0136

Huetink, J. and Vreede, P.T. and Lugt, J. van der (1990) Progress in mixed Eulerian-Lagrangian finite element simulation of forming processes. International Journal for Numerical Methods in Engineering, 30 (8). pp. 1441-1457. ISSN 0029-5981

Wijnant, Y.H. (2006) Resonators. Journaal Nederlands Akoestisch Genootschap, 178 . pp. 1-9. ISSN 15714233

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2006) Rigid particle toughening of aliphatic polyketone. Polymer, 47 (16). pp. 5880-5887. ISSN 0032-3861

Havinga, Jos and Boogaard, Ton van den and Klaseboer, Gerrit (2013) Sequential optimization of strip bending process using multiquadric radial basis function surrogate models. Key engineering materials, 554-557 . 911 - 918. ISSN 1013-9826

Wiebenga, J.H. and Boogaard, A.H. van den and Klaseboer, G. (2012) Sequential robust optimization of a V-bending process using numerical simulations. Structural and multidisciplinary optimization, 46 (1). 137 - 153. ISSN 1615-147X

Boogaard, A.H. van den and Huetink, J. (2006) Simulation of aluminium sheet forming at elevated temperatures. Computer Methods in Applied Mechanics and Engineering, 195 (48-49). pp. 6691-6709. ISSN 0045-7825

Kurukuri, Srihari and Miroux, Alexis and Wisselink, Harm and Boogaard, Ton van den (2011) Simulation of stretch forming with intermediate heat treatments of aircraft skins - a physically based modeling approach. International Journal of Material Forming, 4 (2). 129 - 140. ISSN 1960-6206

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Akkerman, R. (2013) Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of gamma-texture. Materials science & engineering A, 573 . 100 - 105. ISSN 0921-5093

Riel, M. van and Boogaard, A.H. van den (2007) Stress–strain responses for continuous orthogonal strain path changes with increasing sharpness. Scripta Materialia, 57 (5). pp. 381-384. ISSN 1359-6462

Hou, B. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Kitting, D. (2014) Study on instability and forming limit of sheet metal under stretch-bending. Key engineering materials, 611-612 . 84 - 91. ISSN 1013-9826

Hadoush, A. and Boogaard, A.H. van den (2009) Substructuring in the implicit simulation of single point incremental sheet forming. International Journal of Material Forming, 2 (3). 181 - 189. ISSN 1960-6206

Snippe, Corijn (2008) Superplasticiteit bij CERN. De appel . pp. 76-79.

Haaren, M.J. van and Stoker, H.C. and Boogaard, A.H. van den and Huetink, J. (2000) The ALE-method with triangular elements: direct convection of integration point values. International Journal for Numerical Methods in Engineering, 49 (5). pp. 697-720. ISSN 0029-5981

Oosterhuis, Ekke and Schott, Dingena and Wijk, Arjen van (2004) The Reclaim Screw in Mammoth Silos Operating on a Free Surface: Comparison Between Horizontal and Inclined Operation on Free Flowing Bulk Solids. Particle & Particle Systems Characterization, 21 (4). pp. 332-339. ISSN 0934-0866

Beltman, W.M. and Burcsu, E.N. and Shepherd, J.E. and Zuhal, L. (1999) The Structural Response of Cylindrical Shells to Internal Shock Loading. Journal of Pressure Vessel Technology, 121 (3). pp. 315-322. ISSN 0094-9930

Lingbeek, R. and Huetink, J. and Ohnimus, S. and Petzoldt, M. and Weiher, J. (2005) The development of a finite elements based springback compensation tool for sheet metal products. Journal of Materials Processing Technology, 169 (1). pp. 115-125. ISSN 0924-0136

Geijselaers, H.J.M. and Tijdeman, H. (1991) The dynamic mechanical characteristics of a resonating microbridge mass-flow sensor. Sensors and Actuators A: Physical, 29 (1). pp. 37-41. ISSN 0924-4247

Meinders, T. and Carleer, B.D. and Geijselaers, H.J.M. and Huetink, J. (1998) The implementation of an equivalent drawbead model in a finite-element code for sheet metal forming. Journal of Materials Processing Technology, 83 (1-3). pp. 234-244. ISSN 0924-0136

Woldman, M. and Heide, E. van der and Tinga, T. and Masen, M.A. (2013) The influence of abrasive body dimensions on single asperity wear. Wear, 301 (1-2). 76 - 81. ISSN 0043-1648

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. (2013) The influence of austenite texture on the martensitic transformation of an austenitic stainless steel. Journal of alloys and compounds, 577S . 609 - 613. ISSN 0925-8388

Wijnant, Y.H. and Wensing, J.A. and Nijen, G.C. (1999) The influence of lubrication on the dynamic behaviour of ball bearings. Journal of Sound and Vibration, 222 (4). pp. 579-596. ISSN 0022-460X

Tinga, Tiedo and Janssen, Rene (2013) The interplay between deployment and optimal maintenance intervals for complex multi-component systems. Proceedings of the Institution of Mechanical Engineers. Part O: Journal of risk and reliability, 227 (3). 42 - 55. ISSN 1748-006X

Pulnikov, A. and Decocker, R. and Permiakov, V. and Dupre, L. and Vandevelde, L. and Petrov, R. and Melkebeek, J. and Houbaert, Y. and Gyselinck, J. and Wisselink, H. (2005) The relation between the magnetostriction and the hysteresis losses in the non-oriented electrical steels. Journal of Magnetism and Magnetic Materials, 290-29 (Part 2). pp. 1454-1456. ISSN 0304-8853

Emmens, W.C. and Sebastiani, G. and Boogaard, A.H. van den (2010) The technology of Incremental Sheet Forming - a brief review of the history. Journal of Materials Processing Technology, 210 (8). pp. 981-997. ISSN 0924-0136

Lingbeek, R.A. and Gan, W. and Wagoner, R.H. and Meinders, T. and Weiher, J. (2008) Theoretical verification of the displacement adjustment and springforward algorithms for springback compensation. International Journal of Material Forming, 1 (3). 159 - 168. ISSN 1960-6206

Lugt, J. van der and Huetink, J. (1986) Thermal mechanically coupled finite element analysis in metal-forming processes. Computer Methods in Applied Mechanics and Engineering, 54 (2). pp. 145-160. ISSN 0045-7825

Peeters, L.J.B. and Powell, P.C. and Warnet, L. (1996) Thermally-induced shapes of unsymmetric laminates. Journal of Composite Materials, 30 (5). pp. 603-626. ISSN 0021-9983

Boogaard, A.H. van den and Kurukuri, Srihari and Ghosh, Manojit and Miroux, Alexis G. (2009) Thermo-mechanical forming of Al-Mg-Si Sheet. Computer methods in materials science, 9 (1). 5 - 11. ISSN 1641-8581

Hadoush, A. and Boogaard, A.H. van den (2008) Time reduction in implicit single point incremental sheet forming simulation by refinement - derefinement. International Journal of Material Forming . ISSN 1960-6206

Zuiderduin, W.C.J. and Westzaan, C. and Huetink, J. and Gaymans, R.J. (2003) Toughening of polypropylene with calcium carbonate particles. Polymer, 44 (1). pp. 261-275. ISSN 0032-3861

Boogaard, A.H. van den and Krauer, J. and Hora, P. (2011) Transformation in Austenitic Stainless Steel Sheet under Different Loading Directions. Key Engineering Materials, 473 . pp. 444-451. ISSN 1013-9826

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Geijselaers, H.J.M. and Boer, A. de (2011) Updating the Craig–Bampton reduction basis for efficient structural reanalysis. International Journal for Numerical Methods in Engineering, 85 (5). pp. 607-624. ISSN 0029-5981

Niazi, M.S. and Wisselink, H.H. and Meinders, T. (2012) Validation of Modified Lemaitre’s Anisotropic Damage Model with the Cross Die Drawing Test. Key Engineering Materials, 488 . 49 - 52. ISSN 1013-9826

Engelen, S.J.P.M. van and Ellenbroek, M.H.M. and Royen, B.J. van and Boer, A. de and Dieën, J.H. van (2012) Validation of vibration testing for the assessment of the mechanical properties of human lumbar motion segments. Journal of biomechanics, 45 (10). 1753 - 1758. ISSN 0021-9290

Post, J. and Vries, C. de and Huetink, J. (2009) Validation tool for 2D multi-stage metal-forming processes on meta-stable stainless steels. Journal of Materials Processing Technology, 209 (15-16). pp. 5558-5572. ISSN 0924-0136

Sloetjes, P.J. and Boer, A. de (2008) Vibration Reduction and Power Generation with Piezoceramic Sheets Mounted to a Flexible Shaft. Journal of Intelligent Material Systems and Structures, 19 (1). pp. 25-34. ISSN 1045-389X

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. (2012) Viscoplastic Regularization of Local Damage Models: A Latent Solution. Key engineering materials, 504-506 . 845 - 850. ISSN 1013-9826

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. (2012) Viscoplastic regularization of local damage models: revisited. Computational mechanics, 51 (2). 203 - 216. ISSN 0178-7675

Beltman, W.M. (1999) Viscothermal wave propagation including acousto-elastic interaction, Part I: Theory. Journal of Sound and Vibration, 227 (3). pp. 555-586. ISSN 0022-460X

Beltman, W.M. (1999) Viscothermal wave propagation including acousto-elastic interaction, Part II: Applications. Journal of Sound and Vibration, 227 (3). pp. 587-609. ISSN 0022-460X

Kurukuri, S. and Boogaard, A.H. van den and Miroux, A. and Holmedal, B. (2009) Warm forming simulation of Al-Mg sheet. Journal of Materials Processing Technology, 209 (15-16). 5636 - 5645. ISSN 0924-0136

Selman, A. and Atzema, E. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Wrinkling in sheet metal forming: experimental testing vs. numerical analysis. International journal of forming processes, 6 (2). pp. 147-160. ISSN 1292-7775

Article News

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de (2013) Actuator voor helikopterflaps. Technisch weekblad, 2013 .

Paternoster, A.R.A. and Loendersloot, R. and Warnet, L. and Boer, A. de and Akkerman, R. (2013) Engineers in a flap over rotor blades. Flight International . 24 - 24. ISSN 0015-3710

Wijnant, Y.H. and Boer, A. de (2013) Nieuw betonblok maakt uitwijken in berm ongehoord stil. Dagblad TCTubantia .

Audio-visual material

Wijnant, Ysbrand Hans (2006) Broadband sound reduction with acoustic resonator. [Audio-visual material]

Book

Chaari, Fakher and Leskow, Jacek and Napolitano, Antonio and Sanchez Ramirez, Andrea (2014) Cyclostationarity: Theory and Methods. Lecture Notes in Mechanical Engineering . Springer. ISBN 9783319041865

Tinga, T. (2012) Mechanism based failure analysis. Netherlands Defence Academy, Den Helder. ISBN 9789461900319

Tinga, T. (2013) Principles of loads and failure mechanisms. Applications in maintenance, reliability and design. Springer Series in Reliability Engineering . Springer Verlag, London. ISBN 9781447149163

Loendersloot, Richard , ed. (2011) SAMPE Benelux Student Seminar : Book of Abstracts. University of Twente, Enschede, the Netherlands.

Book Section

Grooteman, F.P. and Locht, J. and Hoogt, P.J.M. van der and Spiering, R.M.E.J. and Tijdeman, H. (1994) A DIANA-element for the dynamic analysis of laminate plates. In: DIANA Computational Mechanics '94. Kluwer. ISBN 9780792331049

Snippe, Corijn H.C. and Meinders, Timo (2008) A constitutive model for the superplastic material ALNOVI-1 including leak risk information. In: Metal forming conference, 2008, Vol. 2. Verlag Stahleisen GmbH., Düsseldorf, pp. 325-331.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) A metamodel based optimisation algorithm for metal forming processes. In: Advanced Methods in Material Forming. Springer, pp. 55-72. ISBN 9783540698449

Wijnant, Ysbrand (2006) Acoustic Source Identification. In: Lecture notes Experimental Aeroacoustics. Van Karman Institute, Brussel.

Beltman, W.M. and Hoogt, P.J.M. van der and Spiering, R.M.E.J. and Tijdeman, H. (1994) Application and experimental verification of DIANA for acousto-elastic problems. In: DIANA Computational Mechanics '94. Kluwer. ISBN 9780792331049

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2013) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: New Trends in Smart Technologies. Fraunhofer Verlag, Stuttgart, 99 - 108. ISBN 9783839605776

Visser, Rene (2003) Experimental validation of a boundary element solver for exterior acoustic radiation problems. In: Proceedings of the Tenth International Congress on Sound and Vibration. KTH, Stockholm, pp. 1499-1506. ISBN 9780854327898

Oude Nijhuis, Marco and Boer, André de (2002) Finite element modelling approach in active structural acoustic control. In: Proceedings Mechatronics 2002. Universiteit Twente Uitgeverij, Enschede. ISBN 9789036517669

Oude Nijhuis, Marco H.H. and Boer, André de (2002) Finite element models applied in active structural acoustic control. In: Smart Structures and Materials 2002: Modeling, Signal Processing, and Control. SPIE, Bellingham, Washington, pp. 57-68. ISBN 9780819444417

Datta, K. and Geijselaers, H.J.M. and Post, J. and Beyer, J. and Huetink, J. (2007) Modelling the Material Behaviour of Metastable Stainless Steels. In: NUMIFORM '07: Materials processing and design: modeling, simulation and applications. American Institute of Physics, pp. 655-660. ISBN 9780735404151

Beijers, Clemens A.J. and Boer, André de (2003) Numerical modelling of rubber vibration isolators. In: Proceedings of the Tenth International Congress on Sound and Vibration. KTH, Stockholm, pp. 805-812. ISBN 9780854327898

Loendersloot, R. (2011) Permeability of non-crimp fabric preforms. In: Noncrimp Fabric Composites : Manufacturing, Properties and Applications. Woodhead Publishing, pp. 166-215. ISBN 9781845697624

Stoter, Arjan and Dalmolen, Simon and Drenth, Eduard and Cornelisse, Erik and Mulder, Wico (2011) Real-time context aware reasoning in on-board intelligent traffic systems: An Architecture for Ontology-based Reasoning using Finite State Machines. In: Proceedings of the3rd International Conference on Agents and Artificial Intelligence. SciTePress, pp. 637-642.

Tinga, T. and Janssen, R.H.P. (2013) Simulation based comparison of predictive maintenance policies. In: Safety, reliability and risk analysis : Beyond the horizon. Taylor & Francis Group, London, 1043 - 1049.

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Smart actuation for helicopter rotorblades. In: Smart actuation and sensing systems - Recent advances and future challenges. Intech open, 657 - 678. ISBN 9789535107989

Tillema, Hetzer and Wensing, Jeroen (2002) Validation of a rotor dynamics model with viscoelastic bearing supports. In: International Conference on Structural Dynamics Modelling - Modelling Test, Analysis, Correlation and Validation. , pp. 593-602.

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2011) Vibration based structural health monitoring and the modal strain energy damage index algorithm applied to a composite T-beam. In: Vibration and Structural Acoustics Analysis : Current Research and Related Technologies. Springer Netherlands, pp. 121-150. ISBN 9789400717022

Beltman, W.M. and Basten, T.G.H. and Tijdeman, H. (1999) Viscothermal damping in thin gas or fluid layers. In: Adaptive structures and material systems 1999. American Society of Mechanical Engineers, New York, pp. 387-395. ISBN 9780791816424

Conference or Workshop Item

Assaad, W.A. and Geijselaers, H.J.M. and Huetink, J. (2008) 3-D Numerical Simulation of Direct Aluminum Extrusion and Die Deformation. In: ET '08, the Conference for Innovations in Aluminum Extrusion, May 13-16, 2008, Gaylord Palms Orlando, FL, USA .

Wisselink, H.H. and Huetink, J. (1998) 3-D modelling of sheet metal shearing. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Wisselink, H.H. and Huetink, J. (2003) 3D FEM Simulation of shape rolling using an ALE method. In: VII International Conference on Computational Plasticity, COMPLAS 2003, April 7-10, 2003, Barcelona, Spain.

Wisselink, H.H. and Huetink, J. and Dijk, M.H.H. van and Leeuwen, A.J. van (2001) 3D FEM Simulations of a shape rolling process. In: fourth ESAFORM conference on Material Forming, April 23-25, 2001, Liège, Belgium.

Wisselink, H.H. and Huetink, J. (2002) 3D FEM simulations of the rolling of stator vanes, including tool deformation. In: 7th International Conference on Technology of Plasticity, ICTP 2002, 27 Oct. - 1 Nov. 2002, Yokohama, Japan.

Post, J. and Klaseboer, G. and Stinstra, E. and Huetink, J. (2004) A DACE study on a three stage metal forming process made of Sandvik Nanoflex. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 475-480).

Kurukuri, S. and Ghosh, M. and Boogaard, A.H. van den (2008) A Dislocation based Constitutive Model for Warm Forming of Aluminum Sheet. In: The 9th International Conference on Technology of Plasticity, ICTP, 7-11 September 2008, Gyeongju, Korea (pp. pp. 333-338).

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Boer, A. de (2009) A Hybrid Design Optimization Method using Enriched Craig-Bampton Approach. In: 16th International Congress on Sound and Vibration, ICSV, July 5-9, 2009, Kraków, Poland.

Hol, J. and Cid Alfaro, M.V. and Meinders, T. and Huetink, J. (2011) A Multi-scale Friction Model for Sheet Metal Forming Simulations. In: 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2011, 21-26 August 2011, Seoul, South Korea (pp. 784 - 791).

Carleer, B.D. and Meinders, T. and Pijlman, H.H. and Huetink, J. and Vegter, H. (1997) A Planar Anisotropic Yield Function Based on Multi Axial Stress States in Finite Elements. In: COMPLAS V, 5th International Conference on Computational Plasticity, March 17-20, 1997, Barcelona, Spain.

Bonte, M.H.A. and Boogaard, A.H. van den and Ravenswaaij, R. van (2007) A Robust Optimisation Strategy for Metal Forming Processes. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal (pp. pp. 493-498).

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. and Nilsen, K.E. and Koenis, P.T.G. (2007) A SUPG approach for determining frontlines in aluminium extrusion simulations and a comparison with experiments. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 602-607).

Meinders, T. and Konter, A.W.A. and Meijers, S.E. and Atzema, E.H. and Kappert, H. (2005) A Sensitivity Analysis On The Springback Behavior Of The Unconstrained Bending Problem. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Trichon, S. and Bonte, M.H.A. and Boogaard, A.H. van den and Ponthot, J.-P. (2007) A Study For Efficiently Solving Optimisation Problems With An Increasing Number Of Design Variables. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal (pp. pp. 481-486).

Tijdeman, H. and Spiering, R.M.E.J. (2003) A System for Unsteady Pressure Measurements Revisited. In: International Forum on Aeroelasticity and. Structural Dynamics, IFASD, June 4-6, 2003, Amsterdam, The Netherlands.

Bonte, M.H.A. and Do, T.T. and Fourment, L. and Boogaard, A.H. van den and Huetink, J. and Habbal, A. (2006) A comparison between optimisation algorithms for metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 883-886).

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2010) A constitutive model for multi-phase steels. In: Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France.

Basten, T.G.H. and Grooteman, F.P. (2000) A fast vibro-acoustic response analysis method for double wall structures including a viscothermal air layer. In: 3rd B2000/MEMCOM Workshop, November 27-28, 2000, University of Twente, Enschede, The Netherlands.

Hannink, M.H.C. and Spiering, R.M.E.J. and Wijnant, Y.H. and Boer, A. de (2006) A finite element approach to the prediction of sound transmission through panels with acoustic resonators. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Kampinga, W.R. and Wijnant, Y.H. and Boer, A. de (2008) A finite element for viscothermal wave propagation. In: ISMA2008, International Conference on Noise and Vibration Engineering, September 15-17, 2008, Leuven, Belgium (pp. pp. 4271-4278).

Wind, J.W. (2006) A global-local optimization method for problems in structural dynamics. In: 25th International Congress of the Aeronautical Sciences, ICAS, September 3-8, 2006, Hamburg, Germany.

Geijselaers, H.J.M. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2012) A macro scale constitutive model for TRIP steel. In: ECCOMAS 2012, September 10-14, 2012, Vienna, Austria (pp. CD-ROM ).

Boogaard, A.H. van den and Werkhoven, R.J. and Bolt, P.J. (2001) A material model for aluminium sheet forming at elevated temperatures. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Boogaard, A.H. van den and Bolt, P.J. (2003) A material model for warm forming of aluminium sheet. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (1999) A mixed elastoplastic / rigid plastic material model. In: Numisheet conference, 1999.

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2011) A model for TRIP steel constitutive behaviour. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Kloosterman, G. and Boogaard, A.H. van den and Huetink, J. (2001) A modified barrier approach to contact problems. In: 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan (pp. 97 - 102).

Hol, J. and Meinders, V.T. and Huetink, J. (2011) A multi-scale friction model framework for full scale sheet forming simulations. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 207 - 212).

Wijnant, Y.H. and Boer, A. de (2006) A new approach to model tyre/road contact. In: International Conference on Noise and Vibration Engineering, ISMA, 18-20 September 2006, Leuven, Belgium (pp. pp. 4453-4462).

Beltman, W.M. (1997) A new design tool for optimization of viscothermaldamping in double wall structures. In: 1997 International Congress on Noise Control Engineering, Inter-Noise, August 25-27, 1997, Budapest, Hungary (pp. pp. 1671-1674).

Wiebenga, J.H. and Weiss, M. and Rolfe, B. and Boogaard, A.H. van den (2012) A numerical approach to robust in-line control of roll forming processes. In: 14th International conference on metal forming, 16-19 September 2012, Krakow (pp. 727 - 730).

Wijnant, Ysbrand and Spiering, Ruud and Blijderveen, Maarten van and Boer, André de (2006) A semi-analytical solution for viscothermal wave propagation in narrow gaps with arbitrary boundary conditions. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Hol, J. and Wiebenga, J.H. and Dane, C. and Meinders, V.T. and Boogaard, A.H. van den (2014) A software solution for advanced friction modeling applied to sheet metal forming. In: IDDRG 2014, 02-06-2014 - 05-06-2014, Paris (pp. 344 - 349).

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2007) A stress integration algorithm for phase transforming steels. In: IX international conference on computational plasticity COMPLAS, 2007, Barcelona.

Kampinga, Ronald and Wijnant, Ysbrand and Boer, André de (2009) A two step viscothermal acoustic FE method. In: International Congress on Sound and Vibration, ICSV 16, 5-9 July 2009, Kraków, Poland.

Wiebenga, J.H. and Atzema, E.H. and Boterman, R. and Abspoel, M. and Boogaard, A.H. van den (2013) Accounting for material scatter in sheet metal forming simulations. In: IDDRG 2013 conference, 02-06-2013 - 05-06-2013, Zurich (pp. 57 - 62).

Burchitz, I. and Meinders, T. and Huetink, J. (2007) Accurate simulation of springback using adaptive integration [poster]. In: Tenth Engineering Mechanics Symposium, EM 2007, 11-12 October, 2007 , Lunteren, The Netherlands.

Visser, R. and Tijdeman, H. (2002) Acoustic Field Prediction [Poster]. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Visser, R. (2000) Acoustic Imaging. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Visser, Rene (2003) Acoustic Source Localization based on Pressure and Particle Velocity Measurements. In: 32nd International Congress and Exposition on Noise Control Engineering, Inter-Noise , August 25-28, 2003, Seogwipo, Korea (pp. pp. 665-670).

Tillema, H.G. and Wensing, J.A. (2002) Acoustic analysis of an induction motor with viscoelastic bearing supports. In: 31st International Conference on Noise Control Engineering, Inter-Noise , August 19-21, 2002, Dearborn, USA.

Eerden, F.J.M. van der and Tijdeman, H. (1999) Acoustic impedance of coupled tubes including viscothermal effects. In: The 1999 Congress and Exposition on Noise Control Engineering, Inter-Noise '99, 6-8 December 1999, Fort Lauderdale, USA (pp. pp. 413-418).

Nijhof, Marten and Beltman, Marco and Wijnant, Ysbrand and Boer, André de (2005) Acoustic modeling of fan noise generation and scattering in a modular duct system. In: Twelfth International Congress on Sound and Vibration, ICSV, July 11-14, 2005, Lisbon, Portugal.

Eerden, F.J.M. van der and Tijdeman, H. (1999) Acoustics of Coupled Tubes [Poster]. In: Second Engineering Mechanics Symposium, 22 - 23 November 1999, Rolduc, Kerkrade, The Netherlands.

Eerden, F.J.M. van der and Molenaar, M.M. and Tijdeman, H. (1998) Acoustics of a Sound Absorbing Wall. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Oude Nijhuis, M.H.H. and Boer, A. de and Tijdeman, H. (2000) Active Noise and Vibration Control using Piezoelectric Sensors and Actuators. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Oude Nijhuis, M.H.H. and Boer, A. de (2002) Active Structural Acoustic Feedback Control [Poster]. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Oude Nijhuis, M.H.H. and Boer, A. de (2001) Actuator optimization for Active Structural Acoustic Control [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Burchitz, I.A. and Meinders, T. and Huetink, J. (2007) Adaptive Through-Thickness Integration Strategy for Shell Elements. In: International Conference in Numerical Methods in industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 699-704).

Boogaard, A.H. van den and Quak, W. (2012) Adaptive smoothed FEM for forming simulations. In: ECCOMAS 2012, September 10-14, 2012, Vienna, Austria (pp. CD-ROM ).

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Adaptive through-thickness integration for shell elements [poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Adaptive through-thickness integration for shells [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Advanced sheet metal forming. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Beltman, W.M. and Hoogt, P.J.M. van der and Spiering, R.M.E.J. and Tijdeman, H. (1996) Air loads on solar panels during launch. In: International Conference on Spacecraft Structures, Materials & Mechnical Testing, 27-29 March 1996, Noordwijk aan Zee, The Netherlands (pp. pp. 219-226).

Boogaard, A.H. van den and Bolt, P.J. and Werkhoven, R.J. (2001) Aluminium sheet forming at elevated temperatures. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Boogaard, A.H. van den and Bolt, P.J. and Werkhoven, R.J. and Hout, M.H.F.M. van (2002) Aluminium sheet forming simulations: influence of the yield surface. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Nijhof, M.J.J. and Wijnant, Y.H. and Boer, A. de (2007) An acoustic finite element including viscothermal effects. In: Fourteenth International Congress on Sound and Vibration, ICSV14, 9-12 July, 2007, Cairns, Australia.

Quak, W. and Boogaard, A.H. van den (2010) An adaptive method for history dependent materials. In: World Congress on Computational Mechanics, 1-2 October 2010, The Hague (pp. 187 - 188).

Kurukuri, Srihari and Miroux, Alexis and Ghosh, Manojit and Boogaard, Ton van den (2009) An advanced material model for aluminum sheet forming at elevated temperatures. In: COMPLAS X, 2-4 September 2009, Barcelona, Spain.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2002) An algorithm to make your implicit code competitive with an explicit code for large scale problems. In: NUMISHEET 2002, 2002.

Schutte, J.H. and Dannenberg, J.F. and Wijnant, Y.H. and Boer, A. de (2010) An implicit and explicit solver for contact problems. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2006) An optimisation strategy for industrial metal forming processes: abstract WCCM 2006. In: 7th World Congress on Computational Mechanics, July 16 - 22, 2006, Los Angeles, California.

Boogaard, A.H. van den and Pijlman, H.H. and Huetink, J. (2000) Anisotropic yield functions in a co-rotating reference frame. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Loendersloot, R. and Schiphorst, F.B.A. and Basten, T.G.H. and Tinga, T. (2013) Application of SHM using an autonomous sensor network. In: International Workshop on Structural Health Monitoring, 10-09-2013 - 12-09-2013, Stanford, CA, U.S.A. (pp. 854 - 861).

Wijnant, Y.H. and Hannink, M.H.C. and Boer, A. de (2003) Application of Viscothermal Wave Propagation Theory for Reduction of Boundary Layer Induced Noise. In: 5th European Conference on Noise Control, Euronoise, May 19-21, 2003, Naples, Italy.

Wisselink, H.H. and Nagy, G.T. and Meinders, V.T. (2012) Application of Wrinkling Criterion for Prediction of Side-Wall Wrinkles in Deepdrawing of Conical Cups. In: International Deep Drawing Research Group Conference 2012: Lightweighting: Possibilities & Challenges, 25-29 November 2012, Mumbai (pp. 301 - 306).

Hannink, M.H.C. and Vlasma, J.P. and Wijnant, Y.H. and Boer, A. de (2005) Application of acoustically tuned resonators for the improvement of sound insulation in aircraft. In: 34th International Congress and Exposition on Noise Control Engineering, InterNoise, August 7-10, 2005, Rio de Janeiro, Brazil.

Wisselink, H.H. and Huetink, J. (2007) Application of nonlocal damage models to sheet forming applications. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 521-524).

Trichon, Sophie and Bonte, Martijn and Ponthot, Jean-Philippe and Boogaard, Ton van den (2007) Aspects of approximate optimisation: overcoming the curse of dimensionality and design of experiments. In: Inverse Problems, Design and Optimization Symposium, April 16-18, 2007, Miami, Florida,U.S.A.

Zand, J. van de and Akkerman, R. (2010) Automated Double Cantilever Beam test system – A two-axis moving camera setup controlled by image analysis for crack recognition. In: SAMPE Benelux Student Seminar 2010, January 12-13, 2010, Ermelo, The Netherlands.

Noordermeer, J.W.M. and Boer, A. de and Huerne, H.L. ter and Schipper, D.J. and Meinders, V.T. (2010) Beïnvloeden bandeigenschappen de schade-ontwikkeling van de weg. In: CROW Infradagen 2010, 23-24 Juni 2010, Papendal, Netherlands.

Moesdijk, R.D. van de and Wisselink, H.H. and Boogaard, A.H. van den and Huetink, J. and Bolt, P.J. and Sillekens, W.H. (1998) Blanking by means of the finite element method. In: IACM Conference, 1998.

Meinders, V.T. and Hol, J. and Boogaard, A.H. van den (2014) Boundary and Mixed Lubrication Friction Modeling under forming process conditions. In: Numisheet 2014, 06-01-2014 - 10-01-2014, Melville (pp. 912 - 917).

Assaad, W. and Geijselaers, H.J.M. and Huetink, J. (2009) Boundary conditions applied on bearing corner in direct aluminum extrusion. In: Esaform 2009, the 12th International ESAFORM Conference on Material Forming, April 27-29, 2009, Enschede.

Kampinga, W.R. and Wijnant, Y.H. (2011) COMSOL’s New Thermoacoustics Interface and Computationally Efficient Alternative Formulations for FEM. In: Comsol Conference, October 26-28, 2011, Stuttgart, Germany.

Hol, J. and Dane, C.M. and Meinders, V.T. (2013) Calculated coefficients of friction as input for finite element simulations. In: Triboforum 2013, Tribologische Entwicklungen in der Umformtechnik, Darmstadt, 19-20 Juni 2013, 19-20 Juni 2013, Darmstadt.

Vegter, H. and Horn, Carel H.L.J. ten and An, Yuguo and Atzema, Eisso H. and Pijlman, Hermen H. and Boogaard, Ton H. van den and Huetink, Han (2003) Characterisation and modelling of the plastic material behaviour and its application in sheet metal forming simulation. In: COMPLAS VII, 7th International Conference on Computational Plasticity, April 7-10, 2003, Barcelona, Spain.

Wijker, J.J. and Ellenbroek, M.H.M. and Boer, A. de (2013) Characterization and synthesis of random acceleration vibration specifications. In: COMPDYN 2013, 12-06-2013 - 14-06-2013, Kos Island, Greece (pp. 1 - 30).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. In: ESAFORM 2013, 22-04-2013 - 24-04-2013, Aveiro (pp. 1014 - 1021).

Carleer, B.D. and Huetink, J. (1996) Closing the Gap between the Workshop and Numerical Simulations in Sheet Metal Forming. In: ECCOMAS Conference on Numerical Methods in Engineering ; 2 (Paris, France), 9-13 September 1996, Paris (pp. pp. 554-560).

Lingbeek, R.A. and Meinders, T. and Ohnimus, S. (2008) Compensation of deep drawing tools for springback and tool-deformation. In: IDDRG 2008, International Deep-drawing Research Group International Conference, 16-18 June 2008, Olofstrom, Sweden (pp. pp. 475-486).

Selman, A. and Meinders, T. and Huetink, J. and Boogaard, A.H. van den (2002) Comprehensive adaptive mesh refinement in wrinkling prediction analysis. In: International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2002, 21-25/10/2002, Science Town, Taejon, Korea.

Boogaard, A.H. van den and Bonte, M.H.A. and Ravenswaaij, R. van (2007) Computational optimisation of robust sheet forming processes. In: IDDRG 2007 International Conference, 21-23 May 2007, Gyor, Hungary.

Riel, M. van and Boogaard, A.H. van den (2007) Consistent plane stress-3D conversion of hardening models and yield criteria. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 624-627).

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Constitutive Behaviour in Strain Path Sensitive Sheet Metal [em poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Post, J. and Datta, K. and Huetink, J. (2004) Constitutive behaviour of the metastable stainless steel: Sandvik Nanoflex. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 13-17 June, 2004, Columbus, Ohio (pp. pp. 1670-1675).

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Constitutive modeling of metastable austenitic stainless steel. In: 11th ESAFORM2008 Conference on Material Forming, April 23-25, 2008, Lyon, France.

Perdahcioglu, E. Semih and Geijselaers, H.J.M. (2011) Constitutive modeling of multiphase materials including phase transformations. In: International Symposium on Plasticity and Its Current Applications, January 3-8, 2011, Puerto Vallarta, Mexico.

Eller, T.K. and Greve, L and Anders, M.T. and Medricky, M and Hatscher, A and Meinders, V.T. and Boogaard, A.H. van den (2013) Constitutive modeling of quench-hardenable boron steel with tailored properties. In: 6th Forming Technology Forum: Modelling of process chains and interfaces for sheet metal forming, Herrsching, 19-20 September 2013, 19-09-2013 - 20-09-2013, Herrsching (pp. 1 - 6).

Datta, K. and Hommes, M. and Post, J. and Geijselaers, H.J.M. and Huetink, H. and Beyer, J. (2003) Constitutive modelling of Sandvik 1RK91. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

De Guido, Samuele and Geijselaers, H.J.M. and Boer, André de (2011) Continuous-discrete variable optimization on composites using kriging surrogate model. In: 16th International Conference on Composite Structures, ICCS 2011, 28-30 June 2011, Porto, Portugal.

Geijselaers, H.J.M. and Huetink, J. (2001) Convection by means of least squares projection for ALE calculations. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Assaad, W. and Geijselaers, H.J.M. (2010) Coupled analysis of material flow and die deflection in direct aluminum extrusion. In: Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France.

Altunlu, A. Can and Hoogt, Peter van der and Boer, André de (2010) Damage evolution by using the near-tip fields of a crack in gas turbine liners. In: 17th International Congress on Sound & Vibration, ICSV 17, July 18-22, 2010, Cairo, Egypt.

Basten, T.G.H. (2001) Damping of double wall panels including a viscothermal air layer. In: 4th European Conference on Noise Control, EURONOISE 2001, 14-17 January 2001, Patras, Greece.

Basten, T.G.H. and Tijdeman, H. (2000) Damping of structural vibrations by vortex shedding. In: International Conference on Noise and Vibration Engineering, ISMA 2000, 13-15 September, 2000, Leuven, Belgium (pp. pp. 287-294).

Basten, T.G.H. and Tijdeman, H. (2000) Damping structural vibrations by vortex shedding [Poster]. In: Third Engineering Mechanics Symposium, EM 2000, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Sanchez Ramirez, Andrea and Loendersloot, Richard and Jauregui Becker, Juan Manuel and Tinga, Tiedo (2013) Design Framework for Vibration Monitoring Systems for Helicopter Rotor Blade Monitoring Using Wireless Sensor Networks. In: International Workshop on Structural Health Monitoring, 10-09-2013 - 12-09-2013, Stanford, CA, U.S.A. (pp. 1023 - 1030).

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Hoogt, P.J.M. van der and Boer, A. de (2008) Design Optimization Utilizing Dynamic Substructuring and Artificial Intelligence Techniques. In: 26th International Modal Analysis Conference, IMAC-XXVI: A Conference & Exposition on Structural Dynamics, February 4-7, 2008, Orlando, Florida, US.

Snippe, C. (2005) Design and optimisation of vertex detector foils as a function of the deformation process, in particular superplastic forming [em poster]. In: NIMR 2005, 2005.

Akcay Perdahcioglu, Didem and Boer, André de and Hoogt, Peter J.M. van der (2007) Design optimization applied in structural dynamics. In: First International Conference on Artificial Intelligence for Industrial Applications, 19-23 February 2007, Ostravice, Czech Republic (pp. pp. 45-51).

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Hoogt, P.J.M. van der and Boer, A. de (2008) Design optimization of structures including repetitive patterns. In: International Conference on Engineering Optimization, EngOpt 2008, June 1-5, 2008, Rio de Janeiro, Brazil.

Jong, Jan A. de and Wijnant, Ysbrand H. and Boer, André de (2013) Determination of the stability limit of a thermoacoustic engine by means of finite elements. In: AIA-DAGA 2013 Conference on Acoustics, 18-03-2013 - 21-03-2013, Merano (pp. 1553 - 1556).

Banabic, D. and Huetink, J. (2006) Determination of the yield locus by means of temperature measurement. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K (pp. pp. 359-362).

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) Deterministic and robust optimisation strategies for metal forming proceesses. In: Forming Technology Forum 2007 – Application of Stochastics and Optimization Methods, 14th – 15th March 2007, ETH Zurich, Switzerland.

Wijnant, Y.H. and Kuipers, E.R. and Boer, A. de (2010) Development and application of a new method for the in-situ measurement of sound absorption. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September 2010, Leuven, Belgiuim.

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2011) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: SMART'11, July 6-8, 2011, Saarbrucken, Germany (pp. 197 - 212).

Gomez Casseres Espinosa, A.F. and Sanchez Ramirez, A. and Combita Alfonso, L.F. and Loendersloot, R. and Berkhoff, A.P. (2014) Development of a piezoelelectric based energy harvesting system for autonomous wireless sensor nodes. In: European Workshop on Structural Health Monitoring, 08-07-2014 - 11-08-2014, Nantes (F) (pp. 205 - 212).

Boer, A. de and Veul, R.P.G. and Arendsen, P. and Bakker, M. (2000) Development of an Analysis and Design Environment for Hybrid Damping. In: AIAA/ASME/ASCE/AHS/ASC, 3-6 april 2000, Atlanta, Georgia.

Ho, Jen-Hsuan and Berkhoff, Arthur (2013) Development of dynamic loudspeakers modified as incident pressure sources for noise reduction in a double panel structure. In: 20th International Congress on Sound and Vibration, ICSV 2013, 7-11 July 2013, Bangkok, Thailand.

Beijers, C.A.J. and Boer, A. de (2002) Dynamic Behaviour of Rubber Engine Mounts [Poster]. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Tillema, Hetzer G. (2001) Dynamic behaviour of ball bearing applications with constrained damping layers. In: 19th International Modal Analysis Conference, IMAC XIX, February 5-8, 2001, Kissimmee, Florida.

Ooijevaar, T.H. and Grooteman, F.P. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2011) Dynamic characterisation of a damaged composite structure with stiffeners employing fibre bragg gratigns. In: 5th International Conference on Composites Testing and Model Simulation, CompTest 2011, February 14-16, 2011, Lausanne, Switzerland.

Sloetjes, Peter and Boer, André de and Hoogt, Peter van der (2007) Dynamics of piezoceramics-based mass and force actuators for rotating machines. In: Fourteenth International Congress on Sound and Vibration, ICSV14, 9-12 July, 2007, Cairns, Australia.

Boogaard, A.H. van den and Emmens, W.C. and Huetink, J. (2010) Effect of Thickness Stress in Stretch-Bending. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 504 - 511).

Martínez López, Alejandro and Boogaard, A.H. van den (2010) Effect of bending on formability limits. In: XVI Congreso Internacional Anual de la SOMIM 2010, September 22-24, 2010, Nuevo Leon, Mexico.

Bolt, P.J. and Werkhoven, R.J. and Boogaard, A.H. van den (2001) Effect of elevated temperatures on the drawability of aluminium sheet components. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Kurukuri, S. and Boogaard, A.H. van den (2009) Effect of temperature on anisotropy. In: M2i Conference: Materials to Innovate Industry and Society, Noordwijkerhout.

Wiebenga, J.H. and Klaseboer, G. and Boogaard, A.H. van den (2011) Efficient Robust Optimization of Metal Forming Processes using a Sequential Metamodel Based Strategy. In: 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2011, 21-26 August 2011, Seoul, South Korea (pp. 978 - 985).

Boogaard, A.H. van den and Meinders, T. and Huetink, J. (2003) Efficient implicit FEM simulation of sheet metal forming. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Hadoush, A. and Boogaard, A.H. van den (2010) Efficient implicit simulation for incremental forming. In: IV European Congress on Computational Mechanics ECCM IV: Solids, Structures and Coupled Problems in Engineering, May 16-21, 2010, Paris, France.

Nijhof, M.J.J. and Wijnant, Y.H. and Boer, A. de (2006) Elliptical side resonators for broadband noise reduction: theory and experiments. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Beltman, W.M. and Hoogt, P.J.M. van der and Spiering, R.M.E.J. and Tijdeman, H. (1996) Energy dissipation in thin air layers. In: International Conference on Noise & Vibration Engineering, ISMA21, 18-20 september 1996, Leuven, Belgium.

Ramachandran, Vignesh Raja Karuppiah and Sanchez Ramirez, Andrea and Zwaag, Berend Jan van der and Meratnia, Nirvana and Havinga, Paul (2014) Energy-efficient on-node signal processing for vibration monitoring. In: 2014 IEEE Ninth International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP), 21-04-2014 - 24-04-2014, Singapore (pp. 1 - 6).

Carleer, Bart D. and Meinders, Timo and Huetink, Han (1996) Equivalent drawbead model in finite element simulations. In: NUMISHEET '96, Third International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes, September 29 - October 3, 1996, Dearborn, Michigan (pp. pp. 25-32).

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1999) Equivalent drawbead performance in deep drawing simulations. In: Numisheet conference, 1999.

Boogaard, A.H. van den and Riel, M. van and Huetink, J. (2005) Evaluation of stresses in a combined plane strain-simple shear test. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

Basten, T.G.H. and Beltman, W.M. and Tijdeman, H. (1999) Experimental Investigation of Sound Reduction by Thin Air Layers [Poster]. In: Second Engineering Mechanics Symposium, EM 1999, 22-23 November 1999, Rolduc, Kerkrade, The Netherlands.

Huls, R.A. and Boer, A. de (2004) Experimental Validation of Acousto-Elastic Interaction in a Combustion Setup [Poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Hannink, M.H.C. and Wijnant, Y.H. and Boer, A. de (2004) Experimental Validation of an Optimised Resonator Configuration for Sound Absorption [Poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Hol, J. and Meinders, V.T. and Boogaard, A.H. van den (2013) Experimental and numerical friction characterization for large-scale forming simulations. In: IDDRG 2013, Zurich, Switzerland, June 2-5 2013, 02-06-2013 - 05-06-2013, Zurich (pp. 337 - 342).

Bekke, D.A. and Wijnant, Y.H. and Boer, A. de (2010) Experimental review on interior tire-road noise models. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium.

Snippe, Q.H.C. and Meinders, V.T. (2009) Extracting material data for superplastic forming simulations. In: IDDRG, 1-3 June 2009, Golden, CO.

Wisselink, Hendrik Herman (1998) FE analysis of sheet metal cutting : poster. In: , 1998.

Voncken, R.M.J. and Sluis, O. van der and Post, J. and Huetink, J. (2004) FE calculations on a three stage metal forming process of Sandvik Nanoflex. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 469-474).

Snippe, Corijn H.C. and Meinders, T. (2007) FE-based radiation length analysis of superplastically formed products. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 770-773).

Wisselink, H.H. (2002) FEM Simulation of the forming of parts from thick sheet [poster]. In: 4th Congress of the Netherlands Institute for Metals Research, NIMR 2002, December 16-17, 2002, Noordwijkerhout, The Netherlands.

Wisselink, Harm (2000) FEM Simulation of the rolling of stator vanes [poster]. In: Second Congress of the Netherlands Institute for Metals Research, NIMR 2000: “Building Bridges In Metallurgy”, 13-14 December 2000, Noordwijkerhout, The Netherlands.

Wisselink, H.H. (2001) FEM Simulation of the stretch-forming of aircraft skins [poster]. In: 3rd Congress of the Netherlands Institute for Metals Research, NIMR 2001, December 10-11, 2001, Noordwijkerhout, The Netherlands.

Wisselink, H.H. and Huetink, J. (2004) FEM simulation of multi step forming of thick sheet. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 899-904).

Perdahcioglu, E.S. and Audish, D. and Boogaard, A.H. van den and Janssen, D. and Verdonschot, N.J.J. (2013) Failure modelling of human femur. In: 3rd International Conference on Material Modelling, 08-09-2013 - 11-09-2013, Warsaw (pp. 259 - 259).

Wind, J.W. and Wijnant, Y.H. and Boer, A. de (2006) Fast evaluation of the Rayleigh integral and applications to inverse acoustics. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Datta, K. and Akagi, H. and Geijselaers, H.J.M. and Huetink, J. (2003) Finite Element Modelling of Bends and Creases during Folding Ultra Thin Stainless Steel Foils. In: ABAQUS Users' Conference 2003, November 24-25, 2003, Vienna.

Wisselink, H.H. and Boogaard, A.H. van den (2005) Finite Element Simulation of the Stretch-Forming of Aircraft Skins. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Wisselink, H.H. and Huetink, J. (1999) Finite element model of the guillotining process. In: second ESAFORM conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

Datta, K. and Post, J.A. and Geijselaers, H.J.M. and Huetink, J. (2002) Finite element modelling of concurrent deformation and transformation in metastable steels. In: ABAQUS World Users Conference, 28-31 May, 2002, New Port, RI, USA.

Jong, J.A. de and Wijnant, Y.H. and Boer, A. de (2013) Finite element simulation of a two-dimensional standing wave thermoacoustic engine. In: ICA 2013, 02-06-2013, Montréal (pp. 1 - 7).

Kurukuri, S. and Boogaard, A.H. van den and Huetink, J. (2007) Finite element simulation of aluminum sheet warm forming using alflow hardening model. In: IX International Conference on Computational Plasticity, COMPLAS 2007, 5-7 September 2007, Barcelona, Spain (pp. pp. 635-638).

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2006) Flow front tracking in aluminium extrusion dies by means of particle trajectories [Poster]. In: 9th Engineering Mechanics Symposium, October 26-27, 2006, Lunteren, the Netherlands.

Oosterhuis, Ekke J. and Eidhof, Wouter B. and Hoogt, Peter J.M. van der and Boer, André de (2006) Force prediction via the inverse FRF using experimental and numerical data from a demonstrator with tuneable nonlinearities. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Martinez Lopez, A. and Boogaard, A.H. van den (2011) Formability Limit Curves under Stretch-Bending. In: 15th International Deep Drawing Research Group Conference, IDDRG 2011, 5-8 June 2011, Bilbao, Spain.

Emmens, W.C. and Boogaard, A.H. van den (2007) Formability created by the Bauschinger effect? In: 2nd International Conference on New Forming Technology, ICNFT 2007, September 20-21, 2007, Bremen, Germany (pp. pp. 79-86).

Wisselink, H.H. (2007) Forming the limits of damage predictions : from fundamentals to application WP4 [poster]. In: NIMR Congress, December 10-11, 2007, Noordwijkerhout, The Netherlands.

Wisselink, H.H. (2006) Forming the limits of damage predictions: from fundamentals to application WP4. In: NIMR Congress, December, 11-12, 2006, Noordwijkerhout, The Netherlands.

Wisselink, H.H. (2005) Forming the limits of damage predictions: from fundamentals to application WP4 [poster]. In: NIMR Congress, December, 12-13, 2005, Noordwijkerhout, The Netherlands.

Emmens, W.C. and Kazantzis, A.V. and Hosson, J.Th.M. de and Boogaard, A.H. van den (2010) Fractional behaviour at cyclic stretch-bending. In: 50th IDDRG Anniversary Conference, May 31 - June 2, 2010, Graz, Austria (pp. 613 - 622).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Huetink, J. (2012) Free surface modeling of contacting solid metal flows employing the ALE formulation. In: ESAFORM 2012, Erlangen (pp. 431 - 436).

Sachs, U. and Akkerman, R. and Thije, R. ten and Rooij, M. de (2011) Friction in Forming of UD Composites. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

Pasaribu, H.R. (2003) Friction reduction by adding copper oxide into alumina and zirconia ceramics. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Bensler, Henry and Eller, Tom and Kabat vel Job, Alexander and Magoulas, Nikolaos and Yigit, Emrah (2014) Future perspectives on automotive CAE. In: FISITA World Automotive Congress, Maastricht, 2-6 June 2014, 02-06-2014 - 06-06-2014, Maastricht, The Netherlands.

Wit, A.J. de and Akcay Perdahcioglu, D. and Brink, W.M. van den and Boer, A. de (2011) Generic linking of finite element models for non-linear static and global dynamic analyses for aircraft structures. In: 3rd ECCOMAS Thematic Conference on Mechanical Response of Composites 2011, 21-23 September 2011, Hannover, Germany.

Paternoster, Alexandre and Loendersloot, Richard and Boer, André de and Akkerman, Remko (2011) Geometric Optimisation of Hinge-less Deployment System for an Active Rotorblade. In: ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011, September 18-21, 2011, Scottsdale, AZ, USA.

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2011) Geometric optimisation of a gurney flap henge-less deployment system for a helicopter model blade. In: European Rotorcraft Forum, Milaan, Italy.

Sanchez Ramirez, Andrea and Loendersloot, Richard and Tinga, Tiedo (2013) Helicopter Rotor Blade Monitoring using Autonomous Wireless Sensor Network. In: CM 2013 and MFPT 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 18-06-2013 - 20-06-2013, Krakow, Poland (pp. 775 - 782).

Tinga, T. (2013) Hoe betrouwbaar is een reliability waarde? In: Maintenance Next, technologie- en onderhoudsexpo, Rotterdam, 2013, 16-18 april 2013, Rotterdam.

Beijers, C.A.J. and Tijdeman, H. and Boer, A. de (2000) Hybrid Isolation of Structure Borne Sound [Poster]. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Beijers, C.A.J. and Tijdeman, H. and Boer, A. de (2001) Hybrid Isolation of Structure Borne Sound [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Beijers, C.A.J. and Boer, A. de (2002) Hybrid Isolation of Structure-Borne Sound: Numerical Models. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Beijers, C.A.J. and Boer, A. de (2002) Hybrid isolation of structure-borne sound. In: International Symposium on Active Control of Sound and Vibration, ACTIVE, July 15-17, 2002, Southampton, UK.

Eller, Tom and Greve, Lars and Andres, Michael and Medricky, Miloslav and Meinders, Timo and Boogaard, Ton van den (2014) Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel. In: Forming Technology Forum, 15-09-2014 - 16-09-2014, Enschede (pp. 55 - 62).

Altunlu, A. Can and Lazoglu, Ismail and Oguz, Emre and Kara, Serkan (2010) Impact Fatigue Characteristics of Valve Leaves for Small Hermetic Reciprocating Compressors. In: 20th International Compressor Engineering Conference at Purdue, 12-15 July 2010, West Lafayette, Indiana, USA.

Derikx, L.C. and Vis, R. and Meinders, T. and Verdonschot, N. and Tanck, E. (2010) Implementation of Asymmetric Yielding in Case Specific Finite Element Models improves the Prediction of Femoral Fracture Risk. In: 18th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, March 5, 2010, New Orleans, USA (pp. 18 - ).

Huetink, J. (2004) Implementation of Microstructural Material Phenomena in Macro Scale Simulations of Forming Processes. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Niazi, M.S. and Wisselink, H.H. and Meinders, T. and Huetink, J. (2009) Implementation of an anisotropic damage material model for non-proportional loading. In: COMPLAS X, International Conference on Computational Plasticity, 2-4 September 2009, Barcelona.

Niazi, Muhammad and Wisselink, Harm and Meinders, Timo and Horn, Carel ten (2010) Implementation of an anisotropic damage material model using general second order damage tensor. In: 13th International Conference on Metal Forming, Metal Forming 2010, September 19-22, 2010, Toyohashi, Japan (pp. 1396 - 1399).

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1998) Implementation of plastic thickness strain in an equivalent drawbead model based on a penalty constrained model. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Hannink, M.H.C. (2006) Improvement of the sound transmission loss of panels by means of acoustically tuned resonators. In: 25th International Congress of the Aeronautical Sciences, ICAS, September 3-8, 2006, Hamburg, Germany.

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2000) Improvements in FE-analysis of real-life sheet metal forming. In: European Congress on Computational Methods in Applied Science and Engineering, ECCOMAS 2000, 11-14 September 2000, Barcelona.

Burchitz, I. and Meinders, T. and Huetink, J. (2005) Improving numerical predictability of Springback [poster]. In: Eight Engineering Mechanics Symposium, EM, November 21-22, 2005, Lunteren, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2004) Improving numerical predictability of Springback [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2005) Improving numerical predictability of Springback [poster]. In: NIMR Congress, December 12-13, 2005, Noordwijkerhout, The Netherlands.

Vegter, H. and Horn, C.H.L.J. ten and Boogaard, A.H. van den (2007) Influence Of The Plastic Material Behaviour On The Prediction Of Forming Limits. In: NUMIFORM 2007, International Conference in Numerical Methods in Industrial Forming Processes, June 17-21, 2007, Porto, Portugal (pp. pp. 87-92).

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Influence of Stress state and Strain path on deformation induced martensitic transformations. In: ESOMAT 2006, 7th European Symposium on Martensitic Transformations and Shape Memory Alloys, September 10th to 15th, 2006, Bochum, Germany.

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Influence of numerical parameters on springback prediction in sheet metal forming. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 407-410).

Havinga, G.T. and Boogaard, A.H. van den and Dallinger, F.N. and Hora, P. (2014) Inline control of a strip bending process in mass production. In: IDDRG, 01-06-2014 - 04-06-2014, Paris (pp. 175 - 180).

Tinga, T. (2013) Innovatieve onderhoudsconcepten bij Defensie. In: Maritiem Symposium, Rotterdam, 24 April 2013, 24 April 2013, Rotterdam.

Oosterhuis, E.J. and Hoogt, P.J.M. van der and Boer, A. de (2004) Inverse Analysis of Dynamic Systems [Poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Visser, R. (2002) Inverse Source Identification based on Acoustic Particle Velocity Measurements. In: 31st International Conference on Noise Control Engineering, Inter-Noise , August 19-21, 2002, Dearborn, USA.

Demcenko, A. and Ravanan, M. and Visser, H.A. and Loendersloot, R. and Akkerman, R. (2013) Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurements. In: 2012 IEEE international ultrasonics symposium (IUS), Dresden, 7-10 October 2012, 07-10-2012 - 10-10-2012, Dresden (pp. 1909 - 1912).

Lingbeek, R.A. and Huetink, J. and Ohnimus, S. and Weiher, J. (2005) Iterative springback compensation of NUMISHEET benchmark #1. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2012) Lab-scale experimental validation of a piezoelectric energy harvesting lag damper. In: 38th European Rotocraft Forum, ERF 2012, 4-7 September 2012, Amsterdam (pp. 1 - 8).

Altunlu, A. Can and Hoogt, Peter van der and Boer, André de (2011) Life assessment by fracture mechanics analysis and damage monitoring technique on combustion liners. In: ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada.

Wisselink, H.H. (2004) Load transfer in bolt joints of coated parts [poster]. In: NIMR 2004, 2004.

Basten, T.G.H. and Beltman, W.M. and Tijdeman, H. (1998) Low frequent sound reduction by thin air layers. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Boogaard, A.H. van den (2012) Material Induced Anisotropic Damage. In: 5th Forming Technology Forum 2012, June 5-6, 2012, Zurich (pp. 23 - 28).

Snippe, C. (2007) Material modeling for the benefit of superplastic forming simulations [poster]. In: EM symposium 2007, 2007.

Pijlman, H.H. (2001) Material modelling of sheet metal by bi-axial experiments. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2010) Mean field modeling of metastable austenitic stainless steel. In: International Symposium on Plasticity, January 3-8, 2010, St. Kitts.

Riel, M. van and Boogaard, A.H. van den (2008) Measurements and calculations on yield surfaces in tension-simple shear experiments. In: 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2008, September 1-5, 2008, Interlaken, Switzerland (pp. pp. 61-66).

Miroux, Alexis and Ghosh, Manojit and Kurukuri, Srihari and Kestens, Leo and Boogaard, Ton van den (2010) Mechanical and Forming Properties of AA6xxx Sheet from Room to Warm Temperatures. In: 12th International Conference on Aluminium Alloys, ICAA, September 5-9, 2010, Yokohama, Japan (pp. 1243 - 1248).

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Mechanical tests and constitutive modeling of metastable austenitic stainless steels [em poster]. In: EM symposium, November 21-22, 2005, Lunteren, The Netherlands.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Metamodelling techniques for the optimisation of metal forming processes. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

De Guido, S. and Geijselaers, H.J.M. and Boer, A. de (2011) Mixed continuous-discrete variable optimization of composite panels using surrogate models. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

Balda Irurzun, U. and Akkerman, R. (2011) Mixed continuous-discrete variable optimization of composite panels using surrogate models. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2013) Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels. In: The 11th International Conference on Numerical Methods in Forming Processes, NUMIFORM2013, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 175 - 182).

Berisha, B. and Hora, P. and Tong, L. and Wahlen, A. and Boogaard, A.H. van den (2008) Modelling of Dynamic Strain Aging with a Dislocation-Based Isotropic Hardening Model and Investigation of Orthogonal Loading. In: ICTP 2008, international conference on technology of plasticity, September 7-11, 2008, Gyeungju, Korea (pp. pp. 339-344).

Boogaard, A.H. van den and Huetink, J. (2004) Modelling of aluminium sheet forming at elevated temperatures. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Haaren, L. and Boogaard, A.H. van den and Huetink, J. (2004) Modelling of aluminium sheet material at elevated temperatures. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004, Trondheim, Norway.

Wisselink, H.H. and Huetink, J. (2009) Modelling of ductile failure in metal forming. In: 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Wisselink, H.H. and Huetink, J. (2010) Modelling of failure in sheet forming using cohesive elements. In: 9th World Congress on Computational Mechanics & 4th Asian Pacific Congress on Computational Mechanics, WCCM/APCOM 2010, July 19-23, 2010, Sydney (pp. - ).

Boogaard, A.H. van den (2005) Modelling of localised necking in thermo-mechanical sheet metal forming. In: Euromech Colloquium 474: Material Instabilities in Coupled Problems, August 30-31, 2005, Troyes, France.

Oude Nijhuis, M.H.H. and Boer, A. de and Tijdeman, H. (2000) Modelling of piezoelectric sensors and actuators for noise and vibration control [Poster]. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Haaren, L. and Miroux, A. (2003) Modelling stretch-forming with intermediate annealing steps [poster]. In: NIMR 2003, 2003.

Bonte, M.H.A. and Boogaard, A.H. van den and Veldman, E. (2007) Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 3-8).

Heida, Jaap and Hwang, Jason (2014) Monitoring of a Full-Scale Wing Fatigue Test. In: 7th European Workshop on Structural Health Monitoring, July 8-11, 2014, Nantes, 08-07-2014 - 11-07-2014, Nantes, France.

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2010) Mould filling analysis of aluminium extrusion dies. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 290 - 295).

Mooij, E. and Ellenbroek, M.H.M. (2007) Multi-Functional Guidance, Navigation, and Control Simulation Environment. In: AIAA Modeling and Simulation Technologies Conference and Exhibit, August 20-23, 2007, Hilton Head, South Carolina.

Wang, C. and Geijselaers, H.J.M. and Boogaard, A.H. van den (2013) Multi-Stage FE Simulation of Hot Ring Rolling. In: The 11th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 2013, 6–10 July 2013, Shenyang, China, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 1014 - 1019).

Entzinger, J.O. and Spallino, R. and Ruijter, W. (2003) Multilevel distributed structure optimization. In: 24th International Congress of the Aeronautical Sciences, ICAS, Aug. 29 - Sept. 4, 2004, Yokohama, Japan.

Hol, J. and Cid Alfaro, M.V. and Rooij, M.B. de and Meinders, V.T. (2010) Multiscale friction modeling for sheet metal forming. In: International Conference on Tribology in Manufacturing Processes, ICTMP 2010, June 13-15, 2010, Nice, France (pp. 573 - 582).

Wind, J.W. and Philippens, D.R. and Boer, A. de (2007) Near Source Acoustical Particle Velocity Measurements with Ambient Noise. In: 25th International Modal Analysis Conference, IMAC-XXV, February 19-22, 2007, Orlando, FLorida, US.

Beijers, C.A.J. and Basten, T.G.H. and Brink, D.R. van den and Verheij, J.W. and Boer, A. de (2004) Near-source error sensor strategies for active vibration isolation of machines. In: International Conference on Noise and Vibration Engineering, ISMA 2004, 20-22 September 2004, Leuven, Belgium (pp. pp. 141-156).

Beijers, C.A.J. and Boer, A. de (2003) Near-source sensor strategies for active isolation [Poster]. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Sluys, L.J. and Geers, M.D.G. and Boogaard, A.H. van den (1998) New Trends in the Modelling of Material Nonlinearities. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Quak, W. and Boogaard, A.H. van den (2009) Nodal integration of meshless methods. In: International Conference on Particle-Based Methods, Particles 2009, 25-27 November 2009, Barcelona, Spain.

Oude Nijhuis, M.H.H. and Tijdeman, H. (1999) Noise and vibration control of COTS electronic equipment [Poster]. In: Second Engineering Mechanics Symposium, 22 - 23 November 1999, Rolduc, Kerkrade, The Netherlands.

Tillema, H.G. (2000) Noise reduction of an electric motor [Poster]. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Tillema, H.G. (1999) Noise reduction of rolling bearing applications using viscoelastic layers [Poster]. In: Second Engineering Mechanics Symposium, 22 - 23 November 1999, Rolduc, Kerkrade, The Netherlands.

Boogaard, A.H. van den and Riel, M. van (2010) Non-proportional deformation paths for sheet metal - experiments. In: Plasticity 2010, January 3-8, 2010, St. Kitts (pp. 223 - 225).

Boogaard, A.H. van den and Riel, M. van (2009) Non-proportional deformation paths for sheet metal: experiments and models. In: 3rd Forming Technology Forum Zurich 2009 - Constitutive Modeling of Kinematic and Anisotropic Hardening Effects for Ductile Materials, May 5-6, 2009, Zurich, Switzerland (pp. 57 - 62).

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Non-proportional tension-shear experiments in a biaxial test facility. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 323-326).

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Boer, A. de (2013) Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure. In: 9th International Workshop on Structural Health Monitoring, IWSHM 2013: A roadmap to intelligent structures, 10-12 September 2013, Lancaster, PA, USA (pp. 445 - 453).

Martinez-Lopez, A. and Boogaard, A.H. van den (2010) Numerical Determination of Sheet Metal Formability under Simultaneous Stretching and Bending. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France (pp. pp. 413-418).

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2007) Numerical Forming Simulations and Optimisation in Advanced Materials. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 281-286).

Lof, J. and Huetink, J. (1998) Numerical Modeling of Aluminium Extrusion. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Beijers, Clemens and Noordman, Bram and Boer, André de (2004) Numerical Modelling of Rubber Vibration Isolators: identification of material parameters. In: Eleventh International Congress on Sound and Vibration, ICSV 11, 5-8 Jul 2004, St. Petersburg, Russia (pp. pp. 3193-3200).

Boer, A. de and Schutte, J.H. (2013) Numerical Simulation of Tyre Road Noise. In: Workshop 'Granular Matter in (zero) Gravity', 2 April 2013, Koln.

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, V.T. (2000) Numerical and physical modelling in forming. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Lemmen, R.L.C. and Panuszka, R.J. (1996) Numerical evaluation of acoustic power radiation and radiation efficiencies of baffled plates. In: V School Energy Methods in Vibroacoustics, 1996, Technical University of Mining and Metallurgy, Cracow ,Poland.

Koopman, A.J. and Geijselaers, H.J.M. and Nilsen, K.E. and Koenis, P.T.G. (2008) Numerical flow front tracking for aluminium extrusion of a tube and a comparison with experiments. In: 11th ESAFORM Conference on Material Forming, 23-25 april 2008, Lyon, France.

Meinders, T. (2002) Numisheet 2002 Benchmark Test A: Cylindrical cup drawing. In: NUMISHEET 2002, 2002.

Meinders, T. (2002) Numisheet 2002 Benchmark Test B: Unconstrained bending. In: NUMISHEET 2002, 2002.

Boogaard, A.H. van den and Vliet, N. van and Huetink, J. (1998) Object oriented design of a thermo-mechanical FEM code. In: World Conference on Computational Mechanics , 1998.

Huetink, J. (2006) On Anisotropy, Objectivity and Invariancy in finite thermo–mechanical deformations. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K (pp. pp. 355-358).

De Guido, S. and Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Boer, A. de (2011) On a novel approach for optimizing composite materials panel using surrogate models. In: 3rd ECCOMAS Thematic Conference on Mechanical Response of Composites 2011, 21-23 September 2011, Hannover, Germany (pp. 439 - 446).

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2002) On adaptive mesh refinement in wrinkling prediction analysis. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Wijnant, Y.H. and Schutte, J.H. and Boer, A. de (2009) On solving the tyre-road contact problem at high frequencies. In: NAG-DAGA International Conference on Acoustics, March 23-26, 2009, Rotterdam, the Netherlands.

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Boer, A. de (2010) On the coupling of reanalysis techniques with a surrogate-based design optimization method. In: 27th international congress of the Aeronautical Sciences, ICAS, 19-24 Sept. 2010, Nice, France.

Yue, Z. M. and Badreddine, H. and Saanouni, K. and Perdahcioglu, E.S. and Soyarslan, C. and Tekkaya, A. E. and Boogaard, A.H. van den (2014) On the distortion of yield surface under complex loading paths in sheet metal forming. In: IDDRG, 01-06-2014 - 04-06-2014, Paris (pp. 246 - 251).

Visser, Rene (2004) On the use of Higher Order and Irregularly Shaped Boundary Elements in Nearfield Acoustical Holography. In: Eleventh International Congress on Sound and Vibration, ICSV 11, July 5-8, 2004, St. Petersburg, Russia (pp. pp. 2371-2378).

Quak, W. and Gonzalez, D. and Cueto, E. and Boogaard, A.H. van den (2009) On the use of local max-ent shape functions for the simulation of forming processes. In: X International Conference on Computational Plasticity, COMPLAS X, 2-4 September 2009, Barcelona, Spain.

Carleer, Bart and Zwickl, Titus and Boogaard, Ton van den and Atzema, Eisso (2008) One day try-out, identifying influence and sensitivity in stamping. In: Numisheet 2008, 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, September 1-5, 2008, Interlaken, Switzerland (pp. pp. 829-834).

Bonte, M.H.A. (2003) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 8-9, 2003, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2004) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2004) Optimisation of Forming Processes [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Bonte, M.H.A. (2005) Optimisation of Forming Processes [poster]. In: Eighth Engineering Mechanica Symposium, 21-22 November 2005, Lunteren, The Netherlands.

Bonte, M.H.A. (2006) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2006) Optimisation of Forming Processes [poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Basten, T.G.H. and Beltman, W.M. and Tijdeman, H. (1998) Optimisation of viscothermal damping of double walll panels. In: 27th International Congress on Noise Control Engineering, Inter-Noise '98, 16-18 November 1998, Christchurch, New Zealand.

Hannink, M.H.C. and Wijnant, Y.H. and Boer, A. de (2004) Optimised Sound Absorbing Trim Panels for the Reduction of Aircraft Cabin Noise. In: Eleventh International Congress on Sound and Vibration, ICSV 11, July 5-8, 2004, St. Petersburg, Russia (pp. pp. 1855-1862).

Hannink, M.H.C. and Wijnant, Y.H. and Boer, A. de (2003) Optimised sound absorbing panels with quarter-wave resonators [Poster]. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Bonte, M.H.A. and Boogaard, A.H. van den and Carleer, B.D. (2006) Optimising towards robust metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 47-50).

Ruijter, W. and Spallino, R. and Hol, J.D. and Entzinger, J. (2003) Optimization of the Airbus A380 Vertical Tail Plane. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Oude Nijhuis, M.H.H. and Boer, A. de (2002) Optimization strategy for actuator and sensor placement in active structural acoustic control. In: International Symposium on Active Control of Sound and Vibration, ACTIVE, July 15-17, 2002, Southampton, UK (pp. pp. 621-632).

Nijhof, Marten J.J. and Beltman, Willem M. (2004) Optimizing Circular Side-Resonators to Reduce Computer Fan Noise. In: National Conference on Noise Control Engineering, Noise-Con, July 12-14, 2004, Baltimore, MD (pp. pp. 815-826).

Amstel, T. van and Groen, M. and Post, J. and Huetink, J. (2005) Optimizing the Post Sandvik Nanoflex material model using inverse optimization and the finite element method. In: eighth ESAFORM conference on Material Forming, April 2005, Cluj-Napoca, Romania (pp. pp. 167-170).

Sloetjes, P.J. and Boer, A. de (2006) Piezoceramics-based Devices for Active Balancing of Flexible Shafts. In: International Conference on Noise and Vibration Engineering, ISMA, 18-20 September 2006, Leuven, Belgium (pp. pp. 543-556).

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2011) Power harvesting in a helicopter lag damper. In: SMART'11, July 6-8, 2011, Saarbrucken, Germany.

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2011) Power harvesting in a helicopter lag damper. In: 37th European Rotorcraft Forum, September 13-15, 2011, Ticino Park, Milan, Italy (pp. 1185 - 1192).

Jong, P.H. de and Boer, A. de and Loendersloot, R. and Hoogt, P.J.M. van der (2010) Power harvesting using piezomaterial in a helicopter rotor blade. In: 17th International Congress on Sound & Vibration, ICSV, 18-22 July, 2010, Cairo, Egypt.

Snippe, Corijn H.C. and Meinders, T. (2007) Prediction of Gas Leak Tightness of Superplastically Formed Products. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM.

Bonte, M.H.A. and Boer, A. de and Liebregts, R. (2004) Prediction of mechanical fatigue caused by multiple random excitations. In: International Conference on Noise and Vibration Engineering, ISMA, 20-22 September 2004, Leuven, Belgium (pp. pp. 697-708).

Boogaard, A.H. van den and Huetink, J. (2003) Prediction of sheet necking with shell finite element models. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Wisselink, Harm and Huetink, Han (2008) Prediction of the bendability of sheet metals using nonlocal damage models. In: Metal forming 2008, 12th international conference, September 21-24, 2008, Krakow, Polska (pp. pp. 217-224).

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2011) Prediction of the mechanical behaviour of TRIP steel. In: 10th International Conference on the Technology of Plasticity, ICTP 2011, September 25th-30th, 2011, Aachen.

Ridder, L. van de and Hakvoort, W.B.J. and Dijk, J. van and Lötters, J.C. and Boer, A. de (2013) Quantitative estimation of the influence of external vibrations on the measurement error of a coriolis mass-flow meter. In: 11th International Conference on Vibration Problems, ICOVP 2013), 9-12 September 2013, Lisbon, Portugal.

Meinders, T. and Carleer, B.D. and Vegter, H. and Huetink, J. (1997) Recent developments in finite element simulations of the deep drawing process. In: Sheet Metal 1997, 8 - 10 April 1997, Ulster, United Kingdom.

Nijhof, M.J.J. and Wijnant, Y.H. and Boer, A. de and Beltman, W.M. (2004) Reduction of fan noise bymeans of (circular) side-resonators; theory and experiment. In: International Conference on Noise and Vibration Engineering, ISMA, 20-22 September 2004, Leuven, Belgium (pp. pp. 403-416).

Visser, R. (2001) Regularization in nearfield acoustic source identification. In: The 8th International Congress on Sound and Vibration, ICSV, July 2-6, 2001, Hong Kong, China (pp. pp. 1637-1644).

Geijselaers, H.J.M. and Huetink, J. (2000) Semi implicit second order discontinuous Galerkin convection for ALE calculations. In: ECCOMAS, European Congress on Computational Methods in Applied Sciences and Engineering, 11-14 September 2000, Barcelona, Spain.

Altunlu, A. Can and Hoogt, Peter van der and Boer, André de (2011) Sensitivity of combustion driven damage mechanisms to instability. In: 18th International Congress on Sound and Vibration, ICSV 2011, 10-14 July 2011, Rio de Janeiro, Brazil.

Havinga, G.T. and Boogaard, A.H. van den and Klaseboer, G. (2013) Sequential optimization of strip bending process using Multiquadric Radial Basis Function surrogate models. In: 16th ESAFORM Conference on Material Forming, April 22-24, 2013, Aveiro, Portugal, 22-24 April 2013, Aveiro, Portugal.

Haanappel, S.P. and Rietman, B. and Akkerman, R. (2012) Shear characterisation of UD thermoplastic composites. In: 11th International Conference on Flow Processing in Composite Materials, FPCM 2012, 9-12 July 2012, Auckland, New Zealand.

Tillema, H.G. (2002) Silent running electric motor by viscoelastic bearing supports [Poster]. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Wisselink, Harm (1999) Simulaties van knippen en slitten [poster]. In: , 1999, Papendal.

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Simulation of Flexible Mechanisms in a Rotating Blade for Smart-Blade Applications. In: European Rotorcraft Forum, 4-7 September 2012, Amsterdam (pp. 1 - 8).

Geijselaers, H.J.M. and Huetink, J. (2004) Simulation of Steady Laser Hardening by an Arbitrary Lagrangian Eulerian Method. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Geijselaers, H.J.M. and Yu, Yuhong and Huetink, J. (2001) Simulation of Steady State Laser Hardening. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Boogaard, A.H. van den and Kelder, M.H. (2004) Simulation of hydro-formability testing for tubes. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004, Trondheim, Norway.

Burchitz, I. and Meinders, T. and Huetink, J. (2007) Simulation of springback: adaptive quadrature [poster]. In: NIMR Congress, December 10-11, 2007, Noordwijkerhout, The Netherlands.

Wisselink, H.H. and Huetink, J. (1998) Simulation of stationary sheet metal cutting processes. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Meinders, T. and Carleer, B.D. and Huetink, J. (1998) Simulation of the deep drawing process: a hierarchical method. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Wisselink, H.H. and Huetink, J. (1999) Simulation of the slitting process with the finite element method. In: International Conference on Sheet Metal, SheMet, 27-28 September 1999, Friedrich-Alexander-University Erlangen-Nuremberg (pp. pp. 143-152).

Haaren, L. van (2004) Simulation of thermo-mechanical aluminium sheet forming [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Haaren, L. van (2004) Simulation of thermo-mechanical aluminium sheet forming [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Kurukuri, S. and Boogaard, A.H. van den and Huetink, J. (2006) Simulation of thermo-mechanical aluminium sheet formming [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Schutte, J.H. and Verhulp, E. and Wijnant, Y.H. and Boer, A. de (2012) Simulation of tyre/road noise by means of a FEM/BEM approach. In: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria (pp. 1 - 10).

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Solving optimisation problems in metal forming using Finite Element simulation and metamodelling techniques. In: Apomat conference, 2005, Morschach, Switzerland.

Eerden, F.J.M. van der and Tijdeman, H. (2000) Sound Absorption for a Predefined Frequency Range [Poster]. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Eerden, Frits van der (2000) Sound absorption and reflection with coupled tubes. In: 3rd B2000 Workshop , November 27-28, 2000, University of Twente, Enschede, the Netherlands.

Eerden, F.J.M. van der and Spiering, R.M.E.J. and Tijdeman, H. (1998) Sound attenuation: implementation of the Biot Theory. In: 2nd B2000/MEMCOM Workshop, November 5-6, Manno, Switserland.

Visser, R. (2002) Source Identification in Structural Acoustics with an Inverse Frequency Response Function Technique. In: ICNPAA 2002 International Conference on Nonlinear Problems in Aviation and Aerospace, May 15-17, 2002, Melbourne, FL, USA.

Wind, Jelmer W. and Tijs, Emiel and Bree, Hans-Elias de (2009) Source localization using acoustic vector sensors: a music approach. In: NOVEM 2009 - Noise and Vibration: Emerging Methods, April 5-8, 2009, Southampton, UK.

Basten, T.G.H. and Mateboer, A.J. and Tijdeman, H. (1998) Spatial matching of structural and acoustic modes in an airtight box. In: International Conference on Noise & Vibration Engineering, ISMA 23, 16-18 september 1998, Leuven, Belgium (pp. pp. 639-646).

Lingbeek, R. and Meinders, T. and Ohnimus, S. and Petzoldt, M. and Weiher, J. (2006) Springback Compensation: Fundamental Topics and Practical Application. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K (pp. pp. 403-406).

Burchitz, I. and Meinders, T. and Huetink, J. (2004) Springback in metal forming. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Sloetjes, P.J. (2004) Stability control of flexible rotors with induced strain materials [Poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Hadoush, A. and Boogaard, A.H. van den and Huetink, J. (2007) Stable incremental deformation of a strip to high strain. In: Sheet metal 2007, April 1st-4th 2007, Palermo, Italy (pp. pp. 615-620).

Emmens, W.C. and Boogaard, A.H. van den (2007) Strain in Shear, and Material Behaviour in Incremental Forming. In: Sheet Metal 2007, April 1-4, 2007, Palermo, Italy (pp. pp. 519-526).

Dallinger, F.N. and Roux, E.P. and Hora, P. and Barlat, F. and Boogaard, A.H. van den (2014) Strain path dependent evolution of yield locus based on HAH model description. In: IDDRG 2014, Paris, June 1-4, 01-06-2014 - 04-06-2015, Paris (pp. 163 - 168).

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Strain path sensitivity in DC06 mild steel [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Akkerman, R. and Boer, A. de (2011) Structural Health Monitoring of an Advanced Composite Aircraft Structure Using a Modal Approach. In: 8th International Workshop on Structural Health Monitoring 2011, September 13-15, 2011, Stanford, CA, USA (pp. 1053 - 1062).

Nijhof, Marten J.J. and Beltman, Willem M. (2005) Structural and acoustic noise radiated by CD drives. In: NOISE-CON 2005, October 17-19, 2005, Minneapolis, Minnesota, USA.

Wolbert, A.G.M. and Hoogt, P.J.M. van der and Lok, Z.A.J. and Boer, A. de (2007) Succesful teaching of experimental vibration research. In: Fourteenth International Congress on Sound and Vibration, ICSV14, 9-12 July, 2007, Cairns, Australia.

Snippe, C. (2006) Superplastic forming of subatomic particle detector foils [em poster]. In: EM symposium 2006, 2006.

Snippe, Q.H.C. and Meinders, V.T. (2009) Superplastic forming simulation of RF detector foils. In: 12th International ESAFORM Conference on Material Forming, April 27-29, 2009, Enschede, The Netherlands.

Nijmeijer, H. (1999) Synchronization under Control. In: Second Engineering Mechanics Symposium, 22 - 23 November 1999, Rolduc, Kerkrade, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2004) Tailoring of Metastable Steels [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Tailoring of metastable steels [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Wensing, J.A. (1998) The Dynamic Behaviour of Ball Bearings. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Emmens, W.C. and Boogaard, A.H. van den and Weijde, D.H. van der (2009) The FLC, enhanced fromavbility, and incremental sheet forming. In: IDDRG, 1-3 June 2009, Golden, USA (pp. 773 - 784).

Haaren, M.J. van and Boogaard, A.H. van den and Stoker, H.C. and Huetink, J. (1999) The arbitrary Lagrangian-Eulerian method on grids of triangular elements: a new convection scheme. In: Second ESAFORM Conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

Kampinga, W.R. and Bosschaart, C. and Wijnant, Y.H. and Boer, A. de (2007) The coupling of a hearing aid loudspeaker membrane to visco-thermal air layers. In: Fourteenth International Congress on Sound and Vibration, ICSV14, 9-12 July, 2007, Cairns, Australia.

Bekke, D.A. (2009) The development of a CPX measurement set-up capable of measuring tire-road noise effectively. In: NAG/DAGA International Conference on Acoustics 2009, 23-26 March 2009, Rotterdam, the Netherlands (pp. p. 564).

Pijlman, Hermen H. and Huetink, J. and Meinders, T. and Carleer, B.D. and Vegter, H. (1998) The implementation of the vegter yield criterion and a physically based hardening rule in finite elements. In: Conference of the International Association of Computational Mechanics, IACM, June-July 1998, Buenos Aires, Argentina.

Atzema, E.H. and Fictorie, E. and Boogaard, A.H. van den and Droog, J.M.M. (2010) The influence of curvature on FLC’s of mild steel, (A)HSS and aluminium. In: IDDRG 2010 International Conference, May 31 - June 2, 2010, Graz, Austria (pp. 519 - 528).

Tinga, T. and Janssen, R.H.P. (2012) The interplay between deployment and optimal maintenance intervals for a navy frigate. In: European Safety and Reliability Congres, Helsinki (pp. 171 - 180).

Rietman, A.D. and Liempt, P. van and Huetink, H. (1997) The modeling of compression tests with a physically based material model using finite elements. In: Fifth International Conference on Computational Plasticity, 17-20 March 1997, Barcelona, Spain (pp. pp. 965-972).

Bonte, M.H.A. and Boogaard, A.H. van den and Ravenswaaij, R. van (2007) The robust optimisation of metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 9-14).

Kuipers, Erwin and Wijnant, Ysbrand and Boer, André de (2011) Theory and application of a new method for the in-situ measurement of sound absorption. In: 37th annual conference for acoustics in Dusseldorf, DAGA 2011, 21-24 March 2011, Dusseldorf.

Metselaar, H.S.C. (1999) Thermally Induced Wear of Ceramics. In: Second Engineering Mechanics Symposium, 22 - 23 November 1999, Rolduc, Kerkrade, The Netherlands.

Geijselaers, H.J.M. and Huetink, H. (2004) Thermo-Mechanical Analysis with Phase Transformations. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 1508-1513).

Kurukuri, S. and Boogaard, A.H. van den and Ghosh, M. and Miroux, A. (2010) Thermo-mechanical Forming of Al–Mg–Si Alloys: Modeling and Experiments. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 810 - 817).

Wisselink, H.H. and Huetink, J. (2002) Tool deformation during the shape rolling of stator vanes. In: fifth ESAFORM conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Cornelissen, B. and Akkerman, R. (2010) Tow Mechanics: Improving The Accuracy Of Deformation Modelling. In: SAMPE Benelux Student Seminar 2010, January 12-13, 2010, Ermelo, The Netherlands.

Lingbeek, R.A. and Meinders, T. (2007) Towards Efficient Modelling Of Macro And Micro Tool Deformations In Sheet Metal Forming. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 723-727).

Houten, M.H. van and Kaplan, H. (2006) Towards a novel design method for impact on leading edges. In: International Crashworthiness Conference, ICrash 2006, July 4-7, 2006, Athens, Greece.

Ravenswaaij, R. van and Tijum, R. van and Hora, P. and Boogaard, A.H. van den and Engel, U. (2013) Towards zero-defect manufacturing of smal metal parts. In: IDDRG 2013, 02-06-2013 - 05-06-2013, Zurich (pp. 87 - 92).

Oude Nijhuis, M.H.H. and Basten, T.G.H. and Wijnant, Y.H. and Tijdeman, H. and Tilmans, H.A.C. (1999) Transient non-linear response of 'pull-in MEMS devices' including squeeze film effects. In: 13th European Conference on Solid-State Transducers, EUROSENSORS XIII, September 12-15, 1999, The Hague, The Netherlands.

Meinders, T. and Burchitz, I. and Bonte, M.H.A. and Lingbeek, R.A. and Perdahcioglu, E.S. and Riel, M. van and Wisselink, H.H. (2007) Trends in Forming Simulation and Optimization of Sheet Metal Products. In: ASME Applied Mechanics and Materials Conference, McMat 2007, June 3-7, 2007, University of Texas, Austin.

Wisselink, H.H. and Niazi, M.S. and Huetink, J. (2011) Validation of advanced material models using the crossdie test. In: IDDRG Conference 2011: Towards sutainable sheet forming processes, 5-8 June 2011, Bilbao, Spain.

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2012) Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors. In: Sixth European Workshop on Structural Health Monitoring, 3-6 July 2012, Germany (pp. 232 - 239).

Ooijevaar, T.H. and Loendersloot, R. and Rogge, M.D. and Akkerman, R. and Tinga, T. (2014) Vibro-Acoustic modulation based damage identification in a composite skin-stiffener structure. In: European Workshop on Structural Health Monitoring, 08-07-2014 - 11-07-2014, Nantes (F) (pp. 544 - 551).

Basten, T.G.H. and Beltman, W.M. and Tijdeman, H. (1999) Viscothermal Damping in Thin Gas or Fluid Layers. In: Second Engineering Mechanics Symposium, EM 1999, 22-23 November 1999, Rolduc, Kerkrade, The Netherlands.

Kampinga, Ronald and Wijnant, Ysbrand and Boer, André de (2006) Viscothermal wave propagation in a circular layer with a partially open and partially closed boundary. In: International Conference on Noise and Vibration Engineering, ISMA, 18-20 September 2006, Leuven, Belgium (pp. pp. 4617-4626).

Bolt, P.J. and Werkhoven, R.J. and Boogaard, A.H. van den (2003) Warm Deep Drawing of Aluminium Sheet. In: Shemet 2003, 2003.

Sanchez Ramirez, Andrea and Das, Kallol and Loendersloot, Richard and Tinga, Tiedo and Havinga, Paul (2013) Wireless sensor network for helicopter rotor blade vibration monitoring: Requirements definition and technological aspects. In: 10th International Conference on Damage Assessment of Structures, DAMAS 2013, 8-10 July 2013, Dublin, Ireland (pp. pp. 775-782).

Sanchez Ramirez, A and Das, K. and Loendersloot, R. and Tinga, T. and Havinga, P.J.M. (2013) Wireless sensor network for hericopter rotor blade vibration monitoring: requirements definition and technological aspects. In: 10th Conference on Damage Assessment of Structures, DAMAS 2013, 08-10 July 2013, Dublin, Ireland (pp. pp. 775-782).

Nagy, Geza T. and Valkering, Kasper and Huetink, Han (2005) Wrinkling criteria in sheet metal forming for single sided contact situation and its application. In: COMPLAS VIII, VIII International Conference on Computational Plasticity, 2005, Barcelona, Spain.

Meinders, Timo and Selman, Sid and Atzema, Eisso H. and Huetink, Han (2003) Wrinkling prediction in sheet metal forming and experimental verification. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2000) Wrinkling prediction with adaptive mesh refinement. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Beltman, W.M. and Tijdeman, H. (1998) [On] the interaction between oscillating panels and thin airlayers. In: Aeroelastik Tagung, 1998.

Lecture

Tinga, T. (2013) De dynamiek van onderhoud. [Lecture]

Patent

Wijnant, Ysbrand Hans (2006) Breedbandige resonantiedemper : aanzuigleiding voor een fluïdumpomp voorzien van een breedbandige resonantiedemper. Patent.

Report

Bonte, M.H.A. (2005) A comparison between optimisation algorithms for metal forming processes { With application to forging. [brace not closed] [Report]

Wisselink, H.H. (2000) ALE simulations of 3D flow problems with moving free surfaces using DIEKA. [Report]

Meinders, T. (1997) Adaptation of the equivalent drawbead model for elastic plas. [Report]

Burchitz, I.A. (2007) Adaptive through-thickness integration strategy for shell elements. [Report]

Quak, Wouter (2008) An overview of meshless methods for forming processes: literature report. [Report]

Meinders, T. (1998) Bepalen van de Gauss integratiepunten over de hoogte. [Report]

Perdahcioglu, E.S. (2006) Biaxial tests on Sandvik Nanoflex. [Report]

Meinders, T. (2001) Dynamics contributions to the static implicit code dieka. [Report]

Koopman, A.J. (2006) Eindrapportage Simalex december 2006. [Report]

Meinders, T. (1996) Equivalent drawbead model. [Report]

Selman, A. and Huetink, J. and Boogaard, A.H. van den (2000) Error estimation for thin sheet metal forming processes. [Report]

Selman, A. (2001) Exit report modelling of sheet metal forming (Project ME97033). [Report]

Burchitz, I. (2004) Forming processes and mechanics of sheet metal forming. [Report]

Bonte, M.H.A. (2004) Forming processes: an introduction, CTW.04/TM-5475. [Report]

Burchitz, I.A. (2007) Influence of discretisation error on springback prediction. [Report]

Bonte, M.H.A. (2005) Internship at CEMEF. [Report]

Kommelt, Pascal (2004) Literature study on hydroform technique. [Report]

Niazi, M.S. (2009) Literature study report of plasticity induced anisotropic damage modeling for forming processes. [Report]

Valkering, Kasper (2000) Maintenance document Dieka PreProcessor for Extrusion. [Report]

Valkering, Kasper and Blokhuis, Y. (2000) Making simulations with PreProcessor ProE. [Report]

Snippe, Corijn (2006) Mechanics of Forming Processes [literature report]: Vol. II. [Report]

Bonte, Martijn H.A. (2004) Optimisation: An Introduction. [Report]

Wiebenga, J.H. (2010) Optimization under uncertainty of metal forming processes - an overview : literature report. [Report]

Snippe, Corijn (2006) Particle physics [Literature report]: Vol. I. [Report]

Wisselink, H.H. (2001) Simulation of the stretch-forming process with the Finite Element Method. [Report]

Bonte, M.H.A. (2005) Solving optimisation problems in metal forming using FEM: A metamodel based optimisation algorithm. [Report]

Lingbeek, Roald (2005) Springback compensation for an analytical elasto-plastic stretch-bending model: Milestone Report M3. [Report]

Lingbeek, Roald (2005) Springback compensation of industrial parts with the displacement adjustment and springforward methods: Milestone 1. [Report]

Burchitz, I. (2005) Springback: improvement of its predictability: Literature study report. [Report]

Trichon, Sophie (2006) Stay at University of Twente, Faculty of Engineering Technology, Applied Mechanics Group. [Report]

Riel, M. van (2006) Strain path dependent material models for forming and crash: literature study for NIMR project MC1.03158. [Report]

Lingbeek, Roald (2005) The application of springback compensation to the CAD geometries of forming tools: Milestone 2. [Report]

Valkering, Kasper (2000) User manual Dieka PreProcessor. [Report]

Selman, A. (2001) Wrinkling prediction procedure in thin sheet metal forming processes with adaptive mesh refinement. Part 1: contact free wrinkling. [Report]

Selman, A. (2001) Wrinkling prediction procedure in thin sheet metal forming processes with adaptive mesh refinement. Part 2: wrinkling with contact. [Report]

Thesis

Visser, Rene (2004) A boundary element approach to acoustic radiation and source indentification. thesis.

Yu, Yuhong (2005) A displacement based FE formulation for steady state problems. thesis.

Beijers, Clementius Andreas Johannes (2005) A modeling approach to hybrid isolation of structure-borne sound. thesis.

Hannink, Marieke Henriette Cathrien (2007) Acoustic resonators for the reduction of sound radiation and transmission. thesis.

Huls, Rob Alexander (2006) Acousto-elastic interaction in combustion chambers. thesis.

Assaad, Wissam Ali (2010) Aluminum extrusion with a deformable die. thesis.

Wisselink, Hendrik Herman (2000) Analysis of guillotining and slitting, finite element simulations. thesis.

Oude Nijhuis, Marco Hendrikus Hermanus (2003) Analysis tools for the design of active structural acoustic control systems. thesis.

Ouwerkerk, Gijs van (2009) CAD implementation of design rules for aluminium extrusion dies. thesis.

Perdahcioglu, Emin Semih (2008) Constitutive modeling of metastable austenitic stainless steel. thesis.

Wijnant, Ysbrand Hans (1998) Contact dynamics in the field of elastohydrodynamic lubrication. thesis.

Kloosterman, Gertjan (2002) Contact methods in finite element simulations. thesis.

Ho, Jen-Hsuan (2014) Control source development for reduction of noise transmitted through a double panel structure. thesis.

Snippe, Quirin Hendrik Catherin (2011) Design and optimization of vertex detector foils by superplastic forming. thesis.

Lof, Joeri (2000) Developments in finite element simulations of aluminium extrusion. thesis.

Meinders, Vincent Timo (2000) Developments in numerical simulations of the real-life deep drawing process. thesis.

Stoker, Hans Christiaan (1999) Developments of the arbitrary lagrangian-eulerian method in non-linear solid mechanics applications to forming processes. thesis.

Hadoush, Ashraf Moh’d Hasan (2010) Efficient simulation and process mechanics of incremental sheet forming. thesis.

Carleer, B.D. (1997) Finite element analysis of deep drawing. thesis.

Thije, René Hermanus Willem ten (2007) Finite element simulations of laminated composite forming processes. thesis.

Chen, Wei (2006) Hydration of slag cement: theory, modeling and application. thesis.

Burchitz, Igor Alexandrovich (2008) Improvement of springback prediction in sheet metal forming. thesis.

Kuipers, E.R. (2013) Measuring sound absorption using local field assumptions. thesis.

Hol, Johan (2013) Multi-scale friction modeling for sheet metal forming. thesis.

Basten, Thomas Geertruida Henricus (2001) Noise reduction by viscothermal acousto-elastic interaction in double wall panels. thesis.

Tillema, Hetzer Gido (2003) Noise reduction of rotating machinery by viscoelastic bearing supports. thesis.

Eerden, Fredericus Joseph Marie van der (2000) Noise reduction with coupled prismatic tubes. thesis.

Geijselaers, H.J.M. (2003) Numerical Simulation of Stresses due to Solid State Transformations : The Simulation of Laser Hardening. thesis.

Quak, Wouter (2011) On meshless and nodal-based numerical methods for forming processes. thesis.

Post, Johannes (2004) On the constitutive behaviour of Sandvik Nanoflex: modelling, experiments and multi-stage forming. thesis.

Owczarek, Pawel (2010) On the design of lubricant free piston compressors. thesis.

Wensing, Jeroen Anton (1998) On the dynamics of ball bearings. thesis.

Huetink, J. (1986) On the simulation of thermo-mechanical forming processes. thesis.

Bonte, Martijn Hans Albert (2007) Optimisation strategies for metal forming processes. thesis.

Akcay Perdahcioglu, Didem (2010) Optimizing the dynamic behavior of structures using substructuring and surrogate modeling. thesis.

Niazi, M.S. (2012) Plasticity induced anisotropic damage modeling for forming processes. thesis.

Jong, P.H. de (2013) Power harvesting using piezoelectric materials: applications in helicopter rotors. thesis.

Wiebenga, Jan Harmen (2014) Robust design and optimization of forming processes. thesis.

Wijskamp, Sebastiaan (2005) Shape distortions in composites forming. thesis.

Lamers, Edwin Adriaan Derk (2004) Shape distortions in fabric reinforced composite products due to processing induced fibre reorientation. thesis.

Pijlman, Hermen Hendrik (2001) Sheet material characterisation by multi-axial experiments. thesis.

Kurukuri, Srihari (2010) Simulation of thermally assisted forming of aluminium sheet. thesis.

Paternoster, A.R.A. (2013) Smart actuation mechanisms for helicopter blades: design case for a mach-scaled model blade. thesis.

Riel, Maarten van (2009) Strain path dependency in sheet metal : experiments and models. thesis.

Altunlu, A.C. (2013) The analysis of mechanical integrity in gas turbine engines subjected to combustion instabilities. thesis.

Hilkhuijsen, P. (2013) The influence of texture on phase transformation in metastable austenitic stainless steel. thesis.

Boogaard, A.H. van den (2002) Thermally Enhanced Forming of Aluminium Sheet. Modelling and experiments. thesis.

Lingbeek, Roald Arnoud (2008) Virtual tool reworking. thesis.

Kampinga, Wim Ronald (2010) Viscothermal acoustics using finite elements : analysis tools for engineers. thesis.

Nijhof, Marten Jozef Johannes (2010) Viscothermal wave propagation. thesis.

Beltman, Willem Martinus (1998) Viscothermal wave propagation including acousto-elastic interaction. thesis.

Other

Kuipers, E.R. and Wijnant, Y.H. and Jong, J.A. de and Boer, A. de (2013) Het dak eraf. .

This list was generated on Sat Dec 20 06:13:37 2014 CET.