Research Chair: Production Technology (PT)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2001 | 2000 | 1997 | 1996 | 1994
Number of items: 50.

2016

Liu, S. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2016) Parameter Study for Friction Surface Cladding of AA1050 on AA2024-T351. In: 11th International Symposium on Friction Stir Welding, 17-05-2016 - 19-05-2016, Cambridge.

2015

Scorticati, D. and Illiberi, A. and Bor, T.C. and Eijt, S.W.H. and Schut, H. and Römer, G.R.B.E. and Klein Gunnewiek, Michel and Lenferink, A.T.M. and Kniknie, B. and Joy, R.M. and Dorenkamper, M.S. and Lange, D.F. de and Otto, C. and Borsa, D. and Soppe, W.J. and Huis in 't Veld, A.J. (2015) Thermal annealing using ultra-short laser pulses to improve the electrical properties of Al:ZnO thin films. Acta materialia, 98 . 327 - 335. ISSN 1359-6454

2014

Ooijevaar, T.H. and Loendersloot, R. and Rogge, M.D. and Akkerman, R. and Tinga, T. (2014) Vibro-Acoustic modulation based damage identification in a composite skin-stiffener structure. In: European Workshop on Structural Health Monitoring, 08-07-2014 - 11-07-2014, Nantes (F) (pp. 544 - 551).

2013

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de (2013) Actuator voor helikopterflaps. Technisch weekblad, 2013 . ISSN 1380-3999

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. In: ESAFORM 2013, 22-04-2013 - 24-04-2013, Aveiro (pp. 1014 - 1021).

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2013) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: C Boller & H Janocha (Eds.), New Trends in Smart Technologies. Fraunhofer Verlag, Stuttgart, 99 - 108. ISBN 9783839605776

Haanappel, S.P. (2013) Forming of UD fibre reinforced thermoplastics. thesis.

Jansma, S.H. and Rietman, A.D. and Warnet, L. and Akkerman, R. (2013) Influence of moisture content on impact properties of flax fibre reinforced polymers. In: CompositesWeek@Leuven and TexComp-11, 19-09-2013 - 20-09-2013, Leuven, Belgium.

Demcenko, A. and Ravanan, M. and Visser, H.A. and Loendersloot, R. and Akkerman, R. (2013) Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurements. In: 2012 IEEE international ultrasonics symposium (IUS), Dresden, 7-10 October 2012, 07-10-2012 - 10-10-2012, Dresden (pp. 1909 - 1912).

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Boer, A. de (2013) Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure. In: 9th International Workshop on Structural Health Monitoring, IWSHM 2013: A roadmap to intelligent structures, 10-12 September 2013, Lancaster, PA, USA (pp. 445 - 453).

Wolthuizen, D.J. and Thije, R.H.W. ten and Akkerman, R. (2013) Simple tests as critical indicator of intra-ply shear locking. Key engineering materials, 554-557 . 512 - 520. ISSN 1013-9826

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Akkerman, R. (2013) Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of gamma-texture. Materials science & engineering A, 573 . 100 - 105. ISSN 0921-5093

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. (2013) The influence of austenite texture on the martensitic transformation of an austenitic stainless steel. Journal of alloys and compounds, 577S . 609 - 613. ISSN 0925-8388

2012

Balda Irurzun, Unai and Dutschk, Victoria and Calvimontes, Alfredo and Akkerman, Remko (2012) Generation of micro-sized conductive lines on glass fibre fabrics by inkjet printing. Autex research journal, 12 (2). 55 - 61. ISSN 1470-9589

Drenth, E. and Bor, T.C. and Visser, H.A. and Wolters, M. (2012) Influence of the Level of Gelation on Physical Ageing Kinetics of uPVC Pipes. In: 15th International Conference on Deformation, Yield and Fracture of Polymers, 1-5 April 2012, Kerkrade, the Netherlands (pp. 194 - 197).

Palacios-Aguilera, N.B. and Bastemeijer, J. and Mollinger, J.R. and Bossche, A. and Mokkapati, V.R.S.S. and Visser, H.A. and Akkerman, R. (2012) Low-cost technology for the integration of micro- and nanochips into fluidic systems on printed circuit board: fabrication challenges. International journal on advances in systems and measurements, 5 (1-2). 11 - 21. ISSN 1942-261X

Demcenko, A. and Akkerman, R. and Nagy, P.B. and Loendersloot, R. (2012) Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVC. NDT & E international, 49 . 34 - 39. ISSN 0963-8695

Drenth, E. and Bor, T.C. and Visser, H.A. and Wolters, M. (2012) Non-destructive and in-situ determination of the degree of gelation of pvc pipes. In: Plastic pipes XVI, 24-26 September 2012, Barcelona, Spain (pp. 10 pp. - ).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Simulation of Flexible Mechanisms in a Rotating Blade for Smart-Blade Applications. In: European Rotorcraft Forum, 4-7 September 2012, Amsterdam (pp. 1 - 8).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Smart actuation for helicopter rotorblades. In: G. Berselli & R. Vertechy & G. Vassura (Eds.), Smart actuation and sensing systems - Recent advances and future challenges. Intech open, 657 - 678. ISBN 9789535107989

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2012) Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors. In: Sixth European Workshop on Structural Health Monitoring, 03-07-2012 - 06-07-2012, Germany (pp. 232 - 239).

2011

De Guido, Samuele and Geijselaers, H.J.M. and Boer, André de (2011) Continuous-discrete variable optimization on composites using kriging surrogate model. In: 16th International Conference on Composite Structures, ICCS 2011, 28-30 June 2011, Porto, Portugal.

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2011) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: SMART'11, July 6-8, 2011, Saarbrucken, Germany (pp. 197 - 212).

De Guido, S. and Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Boer, A. de (2011) On a novel approach for optimizing composite materials panel using surrogate models. In: 3rd ECCOMAS Thematic Conference on Mechanical Response of Composites 2011, 21-23 September 2011, Hannover, Germany (pp. 439 - 446).

Stoter, Arjan and Dalmolen, Simon and Drenth, Eduard and Cornelisse, Erik and Mulder, Wico (2011) Real-time context aware reasoning in on-board intelligent traffic systems: An Architecture for Ontology-based Reasoning using Finite State Machines. In: Proceedings of the3rd International Conference on Agents and Artificial Intelligence. SciTePress, pp. 637-642.

Ivanov, S.G. and Anoshkin, A.N. and Zuyko, V. Yu. (2011) Viscoelastic behavior and durability of steel wire - reinforced polyethylene pipes under a high internal pressure. Mechanics of Composite Materials, 47 (2). pp. 193-202. ISSN 0191-5665

2010

Sridhar, Ashok (2010) An inkjet printing-based process chain for conductive structures on printed circuit board materials. thesis.

Lomov, S.V. and Koissin, V. and Karahan, M. and Godara, A. and Gorbatikh, L. and Verpoest, I. (2010) Compressibility of CNT-Grafted Fibrous Reinforcements: A Theory. International Journal of Material Forming, 3 (Suppl.). pp. 627-630. ISSN 1960-6206

Jakevicius, L. and Demcenko, A. and Mardosaite, R. and Strelciunaite, V. (2010) Frequency selection for air-coupled ultrasonic measurements in closed chambers. In: 3rd international conference on radiation interaction with material and its use in technologies 2010, September 20-23, 2010, Kaunas, Lithuania.

Wits, Wessel W. and Sridhar, Ashok (2010) Inkjet printing of 3D metallic silver complex microstructures. In: International Conference on Competitive Manufacturing, COMA 2010, 3-5 February 2010, Cape Town, South Africa.

Lomov, Stepan V. and Beyers, Lesley and Gorbatikh, Larissa and Verpoest, Ignaas and Koissin, Vitaly and Kotanjac, Zeljko and Karahan, Mehmet (2010) Permeability and compressibility of CNT/CNF grafted reinforcements. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Visser, Hendrikus Antonius (2010) Residual lifetime assessment of UPVC gas pipes. thesis.

Jakevicius, L. and Demcenko, A. and Mardosaite, R. (2010) Ultrasound attenuation dependence on air compression or expansion processes. Ultragarsas, 65 (1). pp. 42-46. ISSN 1392-2114

Jakevicius, L. and Demcenko, A. and Mardosaite, R. (2010) Ultrasound attenuation dependence on air compression or expansion processes. Ultragarsas, 65 (1). pp. 42-46. ISSN 1392-2114

Grouve, W.J.B. and Warnet, L. and Akkerman, R. and Wijskamp, S. and Kok, J.S.M. (2010) Weld Strength Assessment for Tape Placement. International Journal of Material Forming, 3 (Suppl.). pp. 707-710. ISSN 1960-6206

2009

Sidin, Ryan S.R. and Hagmeijer, Rob and Sachs, Ulrich (2009) Evaluation of master equations for the droplet size distribution in condensing flow. Physics of fluids, 21 (7). 073303. ISSN 1070-6631

2008

Parlapalli, M.S.R. and Shu, Dongwei and Chai, Gin B. (2008) Buckling of composite beams with two enveloped delaminations: Lower and upper bounds. Computers & Structures, 86 (23-24). pp. 2155-2165. ISSN 0045-7949

Visser, H.A. and Hermkens, R.M.J. and Wolters, M. and Weller, J. and Warnet, L.L. (2008) Excellent impact performance of PVC pipeline materials in gas distribution networks after many years of service. In: International Gas Union Research Conference, IGCR, 8-10 October 2008, Paris, France.

Hermkens, Rene and Wolters, Mannes and Weller, Jeroen and Visser, Roy (2008) PVC pipes in gas distribution: still going strong! In: Plastic Pipes XIV, 22-24 September 2008, Budapest, Hungary.

2007

Thije, René Hermanus Willem ten (2007) Finite element simulations of laminated composite forming processes. thesis.

2006

Loendersloot, Richard (2006) The structure-permeability relation of textile reinforcements. thesis.

2005

Wijskamp, Sebastiaan (2005) Shape distortions in composites forming. thesis.

2004

Burchitz, I. and Meinders, T. and Atzema, E.H. and Kappert, H. and Konter, A.W.A. and Meijers, S.E. and Rietman, A.D. (2004) Improving numerical predictability of Springback [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Lamers, Edwin Adriaan Derk (2004) Shape distortions in fabric reinforced composite products due to processing induced fibre reorientation. thesis.

2001

Warnet, L. and Greasley, A. (2001) Transient forces generated by projectiles on variable quality mouthguards monitored by instrumented impact testing. British Journal of Sports Medicine, 35 (4). pp. 257-262. ISSN 0306-3674

2000

Warnet, Laurent Louis (2000) On the effect of residual stresses on the transverse cracking in cross-ply carbon-polyetherimide laminates. thesis.

Reed, P.E. and Breedveld, G. and Lim, B.C. (2000) Simulation of the drop impact test for moulded thermoplastic containers. International Journal of Impact Engineering, 24 (2). pp. 133-153. ISSN 0734-743X

1997

Houtum, Geert-Jan van and Adan, Ivo and Wal, Jan van der (1997) The symmetric longest queue system. Communications in statistics. Stochastic models, 13 (1). pp. 105-120. ISSN 0882-0287

1996

Peeters, L.J.B. and Powell, P.C. and Warnet, L. (1996) Thermally-induced shapes of unsymmetric laminates. Journal of Composite Materials, 30 (5). pp. 603-626. ISSN 0021-9983

1994

Adan, Ivo and Houtum, Geert-Jan van and Wal, Jan van der (1994) Upper and lower bounds for the waiting time in the symmetric shortest queue system. Annals of operations research, 48 (2). pp. 197-217. ISSN 0254-5330

This list was generated on Tue Dec 6 06:44:27 2016 CET.