Research Chair: Mechanics of forming processes

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Date | Item Type
Jump to: 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1991 | 1990 | 1986 | 1985
Number of items: 247.

2010

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2010) A constitutive model for multi-phase steels. In: Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France.

Quak, W. and Boogaard van den, A.H. (2010) An adaptive method for history dependent materials. In: World Congress on Computational Mechanics, 1-2 October 2010, The Hague.

Assaad, W. and Geijselaers, H.J.M. (2010) Coupled analysis of material flow and die deflection in direct aluminum extrusion. In: Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France.

Hadoush, A. and Boogaard van den, A.H. (2010) Efficient implicit simulation for incremental forming. In: IV European Congress on Computational Mechanics ECCM IV: Solids, Structures and Coupled Problems in Engineering, May 16-21, 2010, Paris, France.

Emmens, W.C. and Kazantzis, A.V. and Hosson de, J.Th.M. and Boogaard van den, A.H. (2010) Fractional behaviour at cyclic stretch-bending. In: 50th IDDRG Anniversary Conference, May 31 - June 2, 2010, Graz, Austria.

Niazi, Muhammad and Wisselink, Harm and Meinders, Timo and Horn ten, Carel (2010) Implementation of an anisotropic damage material model using general second order damage tensor. In: 13th International Conference on Metal Forming, Metal Forming 2010, September 19-22, 2010, Toyohashi, Japan.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2010) Mean field modeling of metastable austenitic stainless steel. In: International Symposium on Plasticity, January 3-8, 2010, St. Kitts.

Wisselink, H.H. and Huetink, J. (2010) Modelling of failure in sheet forming using cohesive elements. In: 9th World Congress on Computational Mechanics & 4th Asian Pacific Congress on Computational Mechanics, WCCM/APCOM 2010, July 19-23, 2010, Sydney.

Owczarek, Pawel (2010) On the design of lubricant free piston compressors. thesis.

Bonte, Martijn H.A. and Fourment, Lionel and Do, Tien-tho and Boogaard van den, A.H. and Huetink, J. (2010) Optimization of forging processes using Finite Element simulations : A comparison of Sequential Approximate Optimization and other algorithms. Structural and Multidisciplinary Optimization, 42 (5). 797 - 810. ISSN 1615-147X

Kurukuri, Srihari (2010) Simulation of thermally assisted forming of aluminium sheet. thesis.

Emmens, W.C. and Sebastiani, G. and Boogaard van den, A.H. (2010) The technology of Incremental Sheet Forming - a brief review of the history. Journal of Materials Processing Technology, 210 (8). pp. 981-997. ISSN 0924-0136

Kurukuri, S. and Boogaard van den, A.H. and Ghosh, M. and Miroux, A. (2010) Thermo-mechanical Forming of Al–Mg–Si Alloys: Modeling and Experiments. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea.

2009

Dikmen, Emre and Hoogt van der, Peter and Boer de, André and Aarts, Ronald and Jonker, Ben (2009) A flexible rotor on flexible supports: modeling & experiments. In: ASME 2009 International Mechanical Engineering Congress & Exposition IMECE 2009, November 13-19, Lake Buena Vista, Florida, USA.

Datta, K. and Delhez, R. and Bronsveld, P.M. and Beyer, J. and Geijselaers, H.J.M. and Post, J. (2009) A low-temperature study to examine the role of epsilon-martensite during strain-induced transformations in metastable austenitic stainless steels. Acta Materialia, 57 . 3321 - 3326. ISSN 1359-6454

Kurukuri, Srihari and Miroux, Alexis and Ghosh, Manojit and Boogaard van den, Ton (2009) An advanced material model for aluminum sheet forming at elevated temperatures. In: COMPLAS X, 2-4 September 2009, Barcelona, Spain.

Emmens, W.C. and Boogaard van den, A.H. (2009) An overview of stabilizing deformation mechanisms in incremental sheet forming. Journal of Materials Processing Technology, 209 (8). pp. 3688-3695. ISSN 0924-0136

Koopman, Albertus Johannes (2009) Analysis tools for the design of aluminium extrusion dies. thesis.

Assaad, W. and Geijselaers, H.J.M. and Huetink, J. (2009) Boundary conditions applied on bearing corner in direct aluminum extrusion. In: Esaform 2009, the 12th International ESAFORM Conference on Material Forming, April 27-29, 2009, Enschede.

Ouwerkerk van, Gijs (2009) CAD implementation of design rules for aluminium extrusion dies. thesis.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2009) Constitutive modeling of metastable austenitic stainless steel. International Journal of Material Forming, 2 (Suppl.). pp. 419-422. ISSN 1960-6206

Reinders, A.H.M.E. and Wit de, H. and Boer de, A. (2009) Design of fibre reinforced PV concepts for building integrated applications. In: 24th EU PVSEC, 21-25 September 2009, Hamburg.

Reinders, Angele and Boer de, André and Winter de, Arjan and Haverlag, Marco (2009) Designing PV powered LED products - integration of PV technology in innovative products. In: 24th EU PVSEC, 21-25 September 2009, Hamburg.

Kurukuri, S. and Miroux, A. and Ghosh, M. and Boogaard van den, A.H. (2009) Effect of temperature on anisotropy in forming simulations of aluminum alloys. International Journal of Material Forming, 2 (Suppl.). 387 - 390. ISSN 1960-6206

Snippe, Q.H.C. and Meinders, V.T. (2009) Extracting material data for superplastic forming simulations. In: IDDRG, 1-3 June 2009, Golden, CO.

Niazi, M.S. and Wisselink, H.H. and Meinders, T. and Huetink, J. (2009) Implementation of an anisotropic damage material model for non-proportional loading. In: COMPLAS X, International Conference on Computational Plasticity, 2-4 September 2009, Barcelona.

Emmens, W.C. and Boogaard van den, A.H. (2009) Incremental forming by continuous bending under tension - an experimental investigation. Journal of Materials Processing Technology, 209 (14). 5456 - 5463. ISSN 0924-0136

Wisselink, H.H. and Klaseboer, G. and Huetink, H. (2009) Modelling of a burr-free blanking process. International journal of material forming, 2 (Suppl.). pp. 539-542. ISSN 1960-6206

Wisselink, H.H. and Huetink, J. (2009) Modelling of ductile failure in metal forming. In: 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Hadoush, A. and Boogaard van den, A.H. (2009) On the performance of substructuring implicit simulation of single point incremental forming. International Journal of Material Forming, 2 (Suppl. 1). pp. 559-562. ISSN 1960-6206

Hadoush, A. and Boogaard van den, A.H. (2009) Substructuring in the implicit simulation of single point incremental sheet forming. International Journal of Material Forming, 2 (3). 181 - 189. ISSN 1960-6206

Dikmen, Emre and Hoogt van der, Peter and Boer de, André and Aarts, Ronald and Jonker, Ben (2009) Thermal modeling of a mini rotor-stator system. In: ASME 2009 International Mechanical Engineering Congress & Exposition IMECE 2009, November 13-19, Lake Buena Vista, Florida, USA.

Boogaard van den, A.H. and Kurukuri, Srihari and Ghosh, Manojit and Miroux, Alexis G. (2009) Thermo-mechanical forming of Al-Mg-Si Sheet. Computer methods in materials science, 9 (1). 5 - 11. ISSN 1641-8581

Kurukuri, S. and Boogaard van den, A.H. and Miroux, A. and Holmedal, B. (2009) Warm forming simulation of Al-Mg sheet. Journal of Materials Processing Technology, 209 (15-16). 5636 - 5645. ISSN 0924-0136

2008

Post, J. and Datta, K. and Beyer, J. (2008) A macroscopic constitutive model for a metastable austenitic stainless steel. Materials Science and Engineering A: Structural materials, 485 (1-2). pp. 290-298. ISSN 0025-5416

Bonte, M.H.A. and Boogaard van den, A.H. and Huetink, J. (2008) An optimisation strategy for industrial metal forming processes. Structural and Multidisciplinary Optimization, 35 (6). pp. 571-586. ISSN 1615-147X

Quak, Wouter (2008) An overview of meshless methods for forming processes: literature report. [Report]

Lingbeek, R.A. and Meinders, T. and Ohnimus, S. (2008) Compensation of deep drawing tools for springback and tool-deformation. In: IDDRG 2008, International Deep-drawing Research Group International Conference, 16-18 June 2008, Olofstrom, Sweden.

Perdahcioglu, Emin Semih (2008) Constitutive modeling of metastable austenitic stainless steel. thesis.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Constitutive modeling of metastable austenitic stainless steel. In: 11th ESAFORM2008 Conference on Material Forming, April 23-25, 2008, Lyon, France.

Boogaard van den, A.H. and Carleer, B.D. and Atzema, E.H. and Wijlen ter, E.V. (2008) Experimental validation of numerical sensitivities in a deep drawing simulation. International Journal of Material Forming . ISSN 1960-6206

Berisha, B. and Hora, P. and Tong, L. and Wahlen, A. and Boogaard van den, A.H. (2008) Modelling of Dynamic Strain Aging with a Dislocation-Based Isotropic Hardening Model and Investigation of Orthogonal Loading. In: ICTP 2008, international conference on technology of plasticity, September 7-11, 2008, Gyeungju, Korea.

Carleer, Bart and Zwickl, Titus and Boogaard van den, Ton and Atzema, Eisso (2008) One day try-out, identifying influence and sensitivity in stamping. In: Numisheet 2008, 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, September 1-5, 2008, Interlaken, Switzerland.

Wisselink, Harm and Huetink, Han (2008) Prediction of the bendability of sheet metals using nonlocal damage models. In: Metal forming 2008, 12th international conference, September 21-24, 2008, Krakow, Polska.

Snippe, Corijn (2008) Superplasticiteit bij CERN. De appel . pp. 76-79.

Hadoush, A. and Boogaard van den, A.H. (2008) Time reduction in implicit single point incremental sheet forming simulation by refinement - derefinement. International Journal of Material Forming . ISSN 1960-6206

Lingbeek, R.A. and Meinders, T. and Rietman, A. (2008) Tool And Blank Interaction In The Cross-Die Forming Process. International Journal of Material Forming, 1 (Suppl.). pp. 161-164. ISSN 1960-6206

Lingbeek, Roald Arnoud (2008) Virtual tool reworking. thesis.

2007

Bonte, M.H.A. and Boogaard van den, A.H. and Ravenswaaij van, R. (2007) A Robust Optimisation Strategy for Metal Forming Processes. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal.

Trichon, S. and Bonte, M.H.A. and Boogaard van den, A.H. and Ponthot, J.-P. (2007) A Study For Efficiently Solving Optimisation Problems With An Increasing Number Of Design Variables. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal.

Bonte, M.H.A. and Boogaard van den, A.H. and Huetink, J. (2007) A metamodel based optimisation algorithm for metal forming processes. In: Advanced Methods in Material Forming. Springer, pp. 55-72. ISBN 9783540698449

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2007) A stress integration algorithm for phase transforming steels. In: IX international conference on computational plasticity COMPLAS, 2007, Barcelona.

Wisselink, H.H. and Huetink, J. (2007) Application of nonlocal damage models to sheet forming applications. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona.

Trichon, Sophie and Bonte, Martijn and Ponthot, Jean-Philippe and Boogaard van den, Ton (2007) Aspects of approximate optimisation: overcoming the curse of dimensionality and design of experiments. In: Inverse Problems, Design and Optimization Symposium, April 16-18, 2007, Miami, Florida,U.S.A.

Bonte, M.H.A. and Boogaard van den, A.H. and Huetink, J. (2007) Deterministic and robust optimisation strategies for metal forming proceesses. In: Forming Technology Forum 2007 – Application of Stochastics and Optimization Methods, 14th – 15th March 2007, ETH Zurich, Switzerland.

Snippe, Corijn H.C. and Meinders, T. (2007) FE-based radiation length analysis of superplastically formed products. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona.

Thije ten, René Hermanus Willem (2007) Finite element simulations of laminated composite forming processes. thesis.

Emmens, W.C. and Boogaard van den, A.H. (2007) Formability created by the Bauschinger effect? In: 2nd International Conference on New Forming Technology, ICNFT 2007, September 20-21, 2007, Bremen, Germany.

Wisselink, H.H. (2007) Forming the limits of damage predictions : from fundamentals to application WP4 [poster]. In: NIMR Congress, December 10-11, 2007, Noordwijkerhout, The Netherlands.

Snippe, C. (2007) Material modeling for the benefit of superplastic forming simulations [poster]. In: EM symposium 2007, 2007.

Datta, K. and Geijselaers, H.J.M. and Post, J. and Beyer, J. and Huetink, J. (2007) Modelling the Material Behaviour of Metastable Stainless Steels. In: NUMIFORM '07: Materials processing and design: modeling, simulation and applications. American Institute of Physics, pp. 655-660. ISBN 9780735404151

Bonte, M.H.A. and Boogaard van den, A.H. and Veldman, E. (2007) Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain.

Huetink, J. and Boogaard van den, A.H. and Geijselaers, H.J.M. and Meinders, T. (2007) Numerical Forming Simulations and Optimisation in Advanced Materials. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal.

Meinders, T. and Perdahcioglu, E.S. and Riel van, M. and Wisselink, H.H. (2007) Numerical modeling of advanced materials. International Journal of Machine Tools and Manufacture, 48 (5). pp. 485-498. ISSN 0890-6955

Bonte, Martijn Hans Albert (2007) Optimisation strategies for metal forming processes. thesis.

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2007) Pre-yield tensile set of a semi-crystalline polymer, its blend and composite. Journal of Materials Science, 42 (12). pp. 4131-4135. ISSN 0022-2461

Snippe, Corijn H.C. and Meinders, T. (2007) Prediction of Gas Leak Tightness of Superplastically Formed Products. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM.

Hadoush, A. and Boogaard van den, A.H. and Huetink, J. (2007) Stable incremental deformation of a strip to high strain. In: Sheet metal 2007, April 1st-4th 2007, Palermo, Italy.

Lingbeek, R.A. and Meinders, T. (2007) Towards Efficient Modelling Of Macro And Micro Tool Deformations In Sheet Metal Forming. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal.

2006

Meinders, T. and Konter, A.W.A. and Meijers, S.E. and Atzema, E.H. and Kappert, H. (2006) A sensitivity analysis on the springback behavior of the Unconstrained Bending Problem. International Journal of Forming Processes, 9 (3). pp. 365-402. ISSN 1292-7775

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Adaptive through-thickness integration for shell elements [poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Bonte, M.H.A. and Boogaard van den, A.H. and Huetink, J. (2006) An optimisation strategy for industrial metal forming processes: abstract WCCM 2006. In: 7th World Congress on Computational Mechanics, July 16 - 22, 2006, Los Angeles, California.

Perdahcioglu, E.S. (2006) Biaxial tests on Sandvik Nanoflex. [Report]

Vegter, H. and Horn ten, Carel H.L.J. and An, Y. and Atzema, E.H. and Pijlman, H.H. and Boogaard van den, A.H. and Huetink, J. (2006) Comportamento pl'astico do material: um dado importante para prever a estampagem de chapas. Corte & conformacao de metais, 12 . pp. 50-69. ISSN 1808-351X

Banabic, D. and Huetink, J. (2006) Determination of the yield locus by means of temperature measurement. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K.

Wisselink, H.H. (2006) Forming the limits of damage predictions: from fundamentals to application WP4. In: NIMR Congress, December, 11-12, 2006, Noordwijkerhout, The Netherlands.

Chen, Wei (2006) Hydration of slag cement: theory, modeling and application. thesis.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Influence of Stress state and Strain path on deformation induced martensitic transformations. In: ESOMAT 2006, 7th European Symposium on Martensitic Transformations and Shape Memory Alloys, September 10th to 15th, 2006, Bochum, Germany.

Thije ten, R.H.W. and Akkerman, R. and Huetink, J. (2006) Large Deformation Simulation of Anisotropic Material. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Mechanical tests and constitutive modeling of metastable austenitic stainless steels [em poster]. In: EM symposium, November 21-22, 2005, Lunteren, The Netherlands.

Snippe, Corijn (2006) Mechanics of Forming Processes [literature report]: Vol. II. [Report]

Huetink, J. (2006) On Anisotropy, Objectivity and Invariancy in finite thermo–mechanical deformations. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K.

Bonte, M.H.A. (2006) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2006) Optimisation of Forming Processes [poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Snippe, Corijn (2006) Particle physics [Literature report]: Vol. I. [Report]

Lingbeek, R. and Meinders, T. and Ohnimus, S. and Petzoldt, M. and Weiher, J. (2006) Springback Compensation: Fundamental Topics and Practical Application. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K.

Trichon, Sophie (2006) Stay at University of Twente, Faculty of Engineering Technology, Applied Mechanics Group. [Report]

Snippe, C. (2006) Superplastic forming of subatomic particle detector foils [em poster]. In: EM symposium 2006, 2006.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Tailoring of metastable steels [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

2005

Meinders, T. and Konter, A.W.A. and Meijers, S.E. and Atzema, E.H. and Kappert, H. (2005) A Sensitivity Analysis On The Springback Behavior Of The Unconstrained Bending Problem. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Bonte, M.H.A. (2005) A comparison between optimisation algorithms for metal forming processes { With application to forging. [brace not closed] [Report]

Yu, Yuhong (2005) A displacement based FE formulation for steady state problems. thesis.

Snippe, C. (2005) Design and optimisation of vertex detector foils as a function of the deformation process, in particular superplastic forming [em poster]. In: NIMR 2005, 2005.

Boogaard van den, A.H. and Wisselink, H.H. and Huetink, J. (2005) Do Advanced Material Models Contribute to Accuracy in Industrial Sheet Forming Simulations? Advanced Materials Research, 6-8 . pp. 71-80. ISSN 1662-8985

Wisselink, H.H. and Boogaard van den, A.H. (2005) Finite Element Simulation of the Stretch-Forming of Aircraft Skins. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Wisselink, H.H. (2005) Forming the limits of damage predictions: from fundamentals to application WP4 [poster]. In: NIMR Congress, December, 12-13, 2005, Noordwijkerhout, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2005) Improving numerical predictability of Springback [poster]. In: NIMR Congress, December 12-13, 2005, Noordwijkerhout, The Netherlands.

Avetisyan, M. and Meinders, T. and Huetink, J. (2005) Influence of an Accurate Trimming operation on Springback. International Journal of Forming Processes, 5 (specia). pp. 31-51. ISSN 1292-7775

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, J. and Gaymans, R.J. (2005) Influence of copolymerisation on fracture behaviour of aliphatic polyketones. Polymer, 46 (6). pp. 1921-1934. ISSN 0032-3861

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2005) Influence of sample thickness on fracture behaviour of a polyketone and a polyketone-rubber blend. Polymer, 46 (23). pp. 10321-10330. ISSN 0032-3861

Bonte, M.H.A. (2005) Internship at CEMEF. [Report]

Lingbeek, R.A. and Huetink, J. and Ohnimus, S. and Weiher, J. (2005) Iterative springback compensation of NUMISHEET benchmark #1. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Boogaard van den, A.H. (2005) Modelling of localised necking in thermo-mechanical sheet metal forming. In: Euromech Colloquium 474: Material Instabilities in Coupled Problems, August 30-31, 2005, Troyes, France.

Bonte, M.H.A. (2005) Optimisation of Forming Processes [poster]. In: Eighth Engineering Mechanica Symposium, 21-22 November 2005, Lunteren, The Netherlands.

Amstel van, T. and Groen, M. and Post, J. and Huetink, J. (2005) Optimizing the Post Sandvik Nanoflex material model using inverse optimization and the finite element method. In: eighth ESAFORM conference on Material Forming, April 2005, Cluj-Napoca, Romania.

Wijskamp, Sebastiaan (2005) Shape distortions in composites forming. thesis.

Bonte, M.H.A. (2005) Solving optimisation problems in metal forming using FEM: A metamodel based optimisation algorithm. [Report]

Bonte, M.H.A. and Boogaard van den, A.H. and Huetink, J. (2005) Solving optimisation problems in metal forming using Finite Element simulation and metamodelling techniques. In: Apomat conference, 2005, Morschach, Switzerland.

Lingbeek, Roald (2005) Springback compensation for an analytical elasto-plastic stretch-bending model: Milestone Report M3. [Report]

Lingbeek, Roald (2005) Springback compensation of industrial parts with the displacement adjustment and springforward methods: Milestone 1. [Report]

Lingbeek, Roald (2005) The application of springback compensation to the CAD geometries of forming tools: Milestone 2. [Report]

Lingbeek, R. and Huetink, J. and Ohnimus, S. and Petzoldt, M. and Weiher, J. (2005) The development of a finite elements based springback compensation tool for sheet metal products. Journal of Materials Processing Technology, 169 (1). pp. 115-125. ISSN 0924-0136

Nagy, Geza T. and Valkering, Kasper and Huetink, Han (2005) Wrinkling criteria in sheet metal forming for single sided contact situation and its application. In: COMPLAS VIII, VIII International Conference on Computational Plasticity, 2005, Barcelona, Spain.

2004

Wisselink, H.H. and Huetink, J. (2004) 3D FEM simulation of stationary metal forming processes with applications to slitting and rolling. Journal of Materials Processing Technology, 148 (3). pp. 328-341. ISSN 0924-0136

Post, J. and Klaseboer, G. and Stinstra, E. and Huetink, J. (2004) A DACE study on a three stage metal forming process made of Sandvik Nanoflex. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Post, J. and Datta, K. and Huetink, J. (2004) Constitutive behaviour of the metastable stainless steel: Sandvik Nanoflex. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 13-17 June, 2004, Columbus, Ohio.

Voncken, R.M.J. and Sluis van der, O. and Post, J. and Huetink, J. (2004) FE calculations on a three stage metal forming process of Sandvik Nanoflex. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Wisselink, H.H. and Huetink, J. (2004) FEM simulation of multi step forming of thick sheet. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Burchitz, I. (2004) Forming processes and mechanics of sheet metal forming. [Report]

Bonte, M.H.A. (2004) Forming processes: an introduction, CTW.04/TM-5475. [Report]

Huetink, J. (2004) Implementation of Microstructural Material Phenomena in Macro Scale Simulations of Forming Processes. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Avetisyan, M. and Meinders, T. and Huetink, J. (2004) Improvement of Springback Predictability after forming and trimming operations. In: 7th ESAFORM conference on Material Forming, April 28-30, 2004, Trondheim, Norway.

Burchitz, I. and Meinders, T. and Huetink, J. (2004) Improving numerical predictability of Springback [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Pulnikov, A. and Permiakov, V. and Petrov, R. and Gyselinck, J. and Langelaan, G. and Wisselink, H. and Dupre, L. and Houbaert, Y. and Melkebeek, J. (2004) Investigation of residual stresses by means of local magnetic measurement. Journal of Magnetism and Magnetic Materials, 272-27 (3). pp. 2303-2304. ISSN 0304-8853

Kommelt, Pascal (2004) Literature study on hydroform technique. [Report]

Wisselink, H.H. (2004) Load transfer in bolt joints of coated parts [poster]. In: NIMR 2004, 2004.

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2004) Mechanical properties of polyketone terpolymer/rubber blends. Polymer, 45 . pp. 3765-3779. ISSN 0032-3861

Boogaard van den, A.H. and Huetink, J. (2004) Modelling of aluminium sheet forming at elevated temperatures. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2004) Modelling shape distortions in composite products. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004 , Trondheim, Norway.

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2004) Notch sensitivity of aliphatic polyketone terpolymers. Journal of Applied Polymer Science, 91 (4). pp. 2558-2575. ISSN 0021-8995

Avetisyan, Marianna (2004) Numerical Trimming Operation with Respect to Springback. [Report]

Post, Johannes (2004) On the constitutive behaviour of Sandvik Nanoflex: modelling, experiments and multi-stage forming. thesis.

Bonte, M.H.A. (2004) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2004) Optimisation of Forming Processes [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Bonte, Martijn H.A. (2004) Optimisation: An Introduction. [Report]

Bonte, M.H.A. and Boer de, A. and Liebregts, R. (2004) Prediction of mechanical fatigue caused by multiple random excitations. In: International Conference on Noise and Vibration Engineering, ISMA, 20-22 September 2004, Leuven, Belgium.

Lamers, Edwin Adriaan Derk (2004) Shape distortions in fabric reinforced composite products due to processing induced fibre reorientation. thesis.

Geijselaers, H.J.M. and Huetink, J. (2004) Simulation of Steady Laser Hardening by an Arbitrary Lagrangian Eulerian Method. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Haaren van, L. (2004) Simulation of thermo-mechanical aluminium sheet forming [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Haaren van, L. (2004) Simulation of thermo-mechanical aluminium sheet forming [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Avetisyan, M. and Meinders, T. and Huetink, J. (2004) Springback: Influence of an Accurate Trimming on Springback [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2004) Tailoring of Metastable Steels [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Geijselaers, H.J.M. and Huetink, H. (2004) Thermo-Mechanical Analysis with Phase Transformations. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

2003

Wisselink, H.H. and Huetink, J. (2003) 3D FEM Simulation of shape rolling using an ALE method. In: VII International Conference on Computational Plasticity, COMPLAS 2003, April 7-10, 2003, Barcelona, Spain.

Boogaard van den, A.H. and Bolt, P.J. (2003) A material model for warm forming of aluminium sheet. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Geijselaers, H.J.M. and Huetink, J. (2003) A second order discontinuous Galerkin method for advection on unstructured triangular meshes keywords: advection convection discontinuous galerkin finite elements. Communications in Numerical Methods in Engineering, 19 (4). pp. 275-284. ISSN 1069-8299

Selman, A. and Meinders, T. and Boogaard van den, A.H. and Huetink, J. (2003) Adaptive numerical analysis of wrinkling in sheet metal forming. International journal of forming processes, 6 (1). pp. 87-102. ISSN 1292-7775

Vegter, H. and Horn ten, Carel H.L.J. and An, Yuguo and Atzema, Eisso H. and Pijlman, Hermen H. and Boogaard van den, Ton H. and Huetink, Han (2003) Characterisation and modelling of the plastic material behaviour and its application in sheet metal forming simulation. In: COMPLAS VII, 7th International Conference on Computational Plasticity, April 7-10, 2003, Barcelona, Spain.

Datta, K. and Hommes, M. and Post, J. and Geijselaers, H.J.M. and Huetink, H. and Beyer, J. (2003) Constitutive modelling of Sandvik 1RK91. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2003) Drape Modelling of Multi-Layered Composites. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Boogaard van den, A.H. and Meinders, T. and Huetink, J. (2003) Efficient implicit FEM simulation of sheet metal forming. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Boogaard van den, A.H. and Meinders, T. and Huetink, J. (2003) Efficient implicit finite element analysis of sheet forming processes. International Journal for Numerical Methods in Engineering, 56 (8). pp. 1083-1107. ISSN 0029-5981

Dijkstra, P.T.S. and Gaymans, R.J. and Dijk van, D.J. and Huetink, J. (2003) Elasticity at Large Deformations and High Strain Rates in Injection Molded Polypropylene. Polymer Engineering and Science, 43 (9). pp. 1613-1623. ISSN 0032-3888

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2003) Fibre Orientation Modelling for Rubber Press Forming of Thermoplastic Laminates. International Journal of Forming Processes, 6 (3-4). pp. 443-463. ISSN 1292-7775

Datta, K. and Akagi, H. and Geijselaers, H.J.M. and Huetink, J. (2003) Finite Element Modelling of Bends and Creases during Folding Ultra Thin Stainless Steel Foils. In: ABAQUS Users' Conference 2003, November 24-25, 2003, Vienna.

Meinders, T. and Boogaard van den, A.H. and Huetink, J. (2003) Improvement of implicit finite element code performance in deep drawing simulations by dynamics contributions. Journal of Materials Processing Technology, 134 (3). pp. 413-420. ISSN 0924-0136

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, H.J. and Gaymans, R.J. (2003) Influence of molecular weight on the fracture properties of aliphatic polyketone terpolymers. Polymer, 44 (20). pp. 6361-6370. ISSN 0032-3861

Haaren, L. and Miroux, A. (2003) Modelling stretch-forming with intermediate annealing steps [poster]. In: NIMR 2003, 2003.

Geijselaers, H.J.M. (2003) Numerical Simulation of Stresses due to Solid State Transformations : The Simulation of Laser Hardening. thesis.

Bonte, M.H.A. (2003) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 8-9, 2003, Noordwijkerhout, The Netherlands.

Wijskamp, S. and Akkerman, R. and Lamers, E.A.D. (2003) Residual stresses in non-symmetrical carbon/epoxy laminates. In: ICCM 14, International conference on composites: Bridging the Gap Between Academia and Industry,, July 14-18, 2003, San Diego, California.

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2003) Residual stresses in rubber formed thermoplastic composites. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Zuiderduin, W.C.J. and Westzaan, C. and Huetink, J. and Gaymans, R.J. (2003) Toughening of polypropylene with calcium carbonate particles. Polymer, 44 (1). pp. 261-275. ISSN 0032-3861

Bolt, P.J. and Werkhoven, R.J. and Boogaard van den, A.H. (2003) Warm Deep Drawing of Aluminium Sheet. In: Shemet 2003, 2003.

Selman, A. and Atzema, E. and Meinders, T. and Boogaard van den, A.H. and Huetink, J. (2003) Wrinkling in sheet metal forming: experimental testing vs. numerical analysis. International journal of forming processes, 6 (2). pp. 147-160. ISSN 1292-7775

Meinders, Timo and Selman, Sid and Atzema, Eisso H. and Huetink, Han (2003) Wrinkling prediction in sheet metal forming and experimental verification. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

2002

Wisselink, H.H. and Huetink, J. (2002) 3D FEM simulations of the rolling of stator vanes, including tool deformation. In: 7th International Conference on Technology of Plasticity, ICTP 2002, 27 Oct. - 1 Nov. 2002, Yokohama, Japan.

Dijkstra, P.T.S. and Dijk van, D.J. and Huetink, J. (2002) A microscopy study of the transition from yielding to crazing in polypropylene. Polymer Engineering and Science, 42 (1). pp. 152-160. ISSN 0032-3888

Meinders, T. and Boogaard van den, A.H. and Huetink, J. (2002) An algorithm to make your implicit code competitive with an explicit code for large scale problems. In: NUMISHEET 2002, 2002.

Selman, A. and Meinders, T. and Huetink, J. and Boogaard van den, A.H. (2002) Comprehensive adaptive mesh refinement in wrinkling prediction analysis. In: International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2002, 21-25/10/2002, Science Town, Taejon, Korea.

Kloosterman, Gertjan (2002) Contact methods in finite element simulations. thesis.

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2002) Drape modelling of multilayer fabric reinforced thermoplastic laminates. In: Sixth International Conference on Textile Composites (TEXCOMP 6), September 11-13, 2002, Philadelphia, Pennsylvania, USA.

Wisselink, H.H. (2002) FEM Simulation of the forming of parts from thick sheet [poster]. In: 4th Congress of the Netherlands Institute for Metals Research, NIMR 2002, December 16-17, 2002, Noordwijkerhout, The Netherlands.

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2002) Fibre Orientation Modelling for Rubber Press Forming of Thermoplastic Laminates. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Datta, K. and Post, J.A. and Geijselaers, H.J.M. and Huetink, J. (2002) Finite element modelling of concurrent deformation and transformation in metastable steels. In: ABAQUS World Users Conference, 28-31 May, 2002, New Port, RI, USA.

Meinders, T. (2002) Numisheet 2002 Benchmark Test A: Cylindrical cup drawing. In: NUMISHEET 2002, 2002.

Meinders, T. (2002) Numisheet 2002 Benchmark Test B: Unconstrained bending. In: NUMISHEET 2002, 2002.

Boogaard van den, A.H. (2002) Thermally Enhanced Forming of Aluminium Sheet. Modelling and experiments. thesis.

Wisselink, H.H. and Huetink, J. (2002) Tool deformation during the shape rolling of stator vanes. In: fifth ESAFORM conference on Material Forming, April 14-17, 2002, Krakow, Poland.

2001

Wisselink, H.H. and Huetink, J. and Dijk van, M.H.H. and Leeuwen van, A.J. (2001) 3D FEM Simulations of a shape rolling process. In: fourth ESAFORM conference on Material Forming, April 23-25, 2001, Liège, Belgium.

Selman, A. and Merrouche, A. and Knopf-Lenoir, C. (2001) 3D mesh refinement procedure using the bisection and rivara algorithms with mesh quality assessment. Revue Europeenne des Elements Finis, REEF .

Kloosterman, G. and Damme van, R.M.J. and Boogaard van den, A.H. and Huetink, J. (2001) A geometrical-based contact algorithm using a barrier method. International Journal for Numerical Methods in Engineering, 51 (7). pp. 865-882. ISSN 0029-5981

Lof, J. and Boogaard van den, A.H. (2001) Adaptive return mapping algorithms for J2 elasto-viscoplastic flow. International Journal for Numerical Methods in Engineering, 51 (11). pp. 1283-1298. ISSN 0029-5981

Boogaard van den, A.H. and Bolt, P.J. and Werkhoven, R.J. (2001) Aluminium sheet forming at elevated temperatures. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Selman, A. (2001) Exit report modelling of sheet metal forming (Project ME97033). [Report]

Wisselink, H.H. (2001) FEM Simulation of the stretch-forming of aircraft skins [poster]. In: 3rd Congress of the Netherlands Institute for Metals Research, NIMR 2001, December 10-11, 2001, Noordwijkerhout, The Netherlands.

Boogaard van den, A. and Bolt, P. and Werkhoven, R. (2001) Modeling of AlMg Sheet Forming at Elevated Temperatures. International journal of forming processes, 4 (3-4). pp. 361-375. ISSN 1292-7775

Pijlman, Hermen Hendrik (2001) Sheet material characterisation by multi-axial experiments. thesis.

Geijselaers, H.J.M. and Yu, Yuhong and Huetink, J. (2001) Simulation of Steady State Laser Hardening. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Selman, A. (2001) Wrinkling prediction procedure in thin sheet metal forming processes with adaptive mesh refinement. Part 1: contact free wrinkling. [Report]

Selman, A. (2001) Wrinkling prediction procedure in thin sheet metal forming processes with adaptive mesh refinement. Part 2: wrinkling with contact. [Report]

2000

Wisselink, H.H. (2000) ALE simulations of 3D flow problems with moving free surfaces using DIEKA. [Report]

Wisselink, Hendrik Herman (2000) Analysis of guillotining and slitting, finite element simulations. thesis.

Langkruis van de, J. and Lof, J. and Kool, W.H. and Zwaag van der, S. and Huetink, J. (2000) Comparison of experimental AA6063 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model. Computational Materials Science, 18 (3-4). pp. 381-392. ISSN 0927-0256

Meinders, V.T. and Berg van den, A. and Huetink, J. (2000) Deep drawing simulations of tailored blanks and experimental verification. Journal of Materials Processing Technology, 103 (1). pp. 65-73. ISSN 0924-0136

Lof, Joeri (2000) Developments in finite element simulations of aluminium extrusion. thesis.

Meinders, Vincent Timo (2000) Developments in numerical simulations of the real-life deep drawing process. thesis.

Selman, A. and Huetink, J. and Boogaard van den, A.H. (2000) Error estimation for thin sheet metal forming processes. [Report]

Wisselink, Harm (2000) FEM Simulation of the rolling of stator vanes [poster]. In: Second Congress of the Netherlands Institute for Metals Research, NIMR 2000: “Building Bridges In Metallurgy”, 13-14 December 2000, Noordwijkerhout, The Netherlands.

Geijselaers, Hubert J. M. and Koning, Annette J. E. (2000) Finite Element Analysis of Thermoelastic Instability With Intermittent Contact. Journal of Tribology, 122 (1). pp. 42-46. ISSN 0742-4787

Huetink, J. and Boogaard van den, A.H. and Geijselaers, H.J.M. and Meinders, T. (2000) Improvements in FE-analysis of real-life sheet metal forming. In: European Congress on Computational Methods in Applied Science and Engineering, ECCOMAS 2000, 11-14 September 2000, Barcelona.

Valkering, Kasper (2000) Maintenance document Dieka PreProcessor for Extrusion. [Report]

Valkering, Kasper and Blokhuis, Y. (2000) Making simulations with PreProcessor ProE. [Report]

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2000) Modelling the distortions of skewed woven fabric reinforced composites. In: Fifth International Conference on Textile Composites (TEXCOMP 5), September 18-20, 2000, Katholieke Universiteit Leuven, Belgium.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2000) Modelling the thermo-elastic properties of skewed woven fabric reinforced composites. In: 9th European Conference on Composite Materials, ECCM, June 4-7 2000, Brighton, UK.

Geijselaers, H.J.M. and Huetink, J. (2000) Semi implicit second order discontinuous Galerkin convection for ALE calculations. In: ECCOMAS, European Congress on Computational Methods in Applied Sciences and Engineering, 11-14 September 2000, Barcelona, Spain.

Haaren van, M.J. and Stoker, H.C. and Boogaard van den, A.H. and Huetink, J. (2000) The ALE-method with triangular elements: direct convection of integration point values. International Journal for Numerical Methods in Engineering, 49 (5). pp. 697-720. ISSN 0029-5981

Valkering, Kasper (2000) User manual Dieka PreProcessor. [Report]

1999

Meinders, T. and Boogaard van den, A.H. and Huetink, J. (1999) A mixed elastoplastic / rigid plastic material model. In: Numisheet conference, 1999.

Huetink, J. and Boogaard van den, A.H. and Rietman, A.D. and Lof, J. and Meinders, T. (1999) A mixed elastoplastic/rigid-plastic material model. International Journal for Numerical Methods in Engineering, 46 (9). pp. 1421-1434. ISSN 0029-5981

Mooi, H.G. and Koenis, P.T.G. and Huetink, J. (1999) An effective split of flow and die deformation calculations of aluminium extrusion. Journal of Materials Processing Technology, 88 (1-3). pp. 67-76. ISSN 0924-0136

Meinders, T. and Berg van den, A. and Huetink, J. (1999) Deep drawing simulations of tailored blanks and experimental verification. International Sheet Metal Review . pp. 80-83. ISSN 1471-6542

Stoker, Hans Christiaan (1999) Developments of the arbitrary lagrangian-eulerian method in non-linear solid mechanics applications to forming processes. thesis.

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1999) Equivalent drawbead performance in deep drawing simulations. In: Numisheet conference, 1999.

Wisselink, H.H. and Huetink, J. (1999) Finite element model of the guillotining process. In: second ESAFORM conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

Rietman, Albert Dirk (1999) Numerical analysis of inhomogeneous deformation in plane strain compression. thesis.

Wisselink, Harm (1999) Simulaties van knippen en slitten [poster]. In: UNSPECIFIED, 1999, Papendal.

Wisselink, H.H. and Huetink, J. (1999) Simulation of the slitting process with the finite element method. In: International Conference on Sheet Metal, SheMet, 27-28 September 1999, Friedrich-Alexander-University Erlangen-Nuremberg.

1998

Wisselink, H.H. and Huetink, J. (1998) 3-D modelling of sheet metal shearing. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Huetink, J. and Boogaard van den, A.H. and Rietman, A.D. and Lof, J. and Meinders, T. (1998) A mixed elastoplastic / rigid-plastic material model. In: Fourth World Congress on Computational Mechanics, WCCM IV, 29 June - 2 July 1998, Buenos Aires, Argentina.

Meinders, T. (1998) Bepalen van de Gauss integratiepunten over de hoogte. [Report]

Moesdijk van de, R.D. and Wisselink, H.H. and Boogaard van den, A.H. and Huetink, J. and Bolt, P.J. and Sillekens, W.H. (1998) Blanking by means of the finite element method. In: IACM Conference, 1998.

Helm, P.N. and Huetink, J. and Akkerman, R. (1998) Comparison of artificial dissipation and limited flux schemes in Arbitrary Lagrangian-Eulerian finite element formulations. International Journal for Numerical Methods in Engineering, 41 (6). pp. 1057-1076. ISSN 0029-5981

Berg van den, A. and Meinders, V.T. and Stokman, B. (1998) Deep drawing simulation of Tailored Blanks. In: 20th Biennial congress, IDDRG (International Deep Drawing Research Group), June 17-19, 1998, Brussels, Belgium.

Meinders, V.T. and Berg van den, A. and Huetink, J. (1998) Deep drawing simulations of Tailored Blanks and experimental verification. In: Sheet Metal 1998. UNSPECIFIED, Enschede, pp. 235-246. ISBN 9789036511131

Wisselink, Hendrik Herman (1998) FE analysis of sheet metal cutting : poster. In: UNSPECIFIED, 1998.

Rietman, Bert (1998) Finite Elements for Better Understanding of Compression Tests. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1998) Implementation of plastic thickness strain in an equivalent drawbead model based on a penalty constrained model. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Boogaard van den, A.H. and Rietman, A.D. and Huetink, J. (1998) Iterative solvers in forming process simulations. In: 6th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede, the Netherlands.

Lof, J. and Huetink, J. (1998) Numerical Modeling of Aluminium Extrusion. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Boogaard van den, A.H. and Vliet van, N. and Huetink, J. (1998) Object oriented design of a thermo-mechanical FEM code. In: World Conference on Computational Mechanics , 1998.

Wisselink, H.H. and Huetink, J. (1998) Simulation of stationary sheet metal cutting processes. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Meinders, T. and Carleer, B.D. and Huetink, J. (1998) Simulation of the deep drawing process: a hierarchical method. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Meinders, T. and Carleer, B.D. and Geijselaers, H.J.M. and Huetink, J. (1998) The implementation of an equivalent drawbead model in a finite-element code for sheet metal forming. Journal of Materials Processing Technology, 83 (1-3). pp. 234-244. ISSN 0924-0136

Pijlman, Hermen H. and Huetink, J. and Meinders, T. and Carleer, B.D. and Vegter, H. (1998) The implementation of the vegter yield criterion and a physically based hardening rule in finite elements. In: Conference of the International Association of Computational Mechanics, IACM, June-July 1998, Buenos Aires, Argentina.

1997

Carleer, B.D. and Meinders, T. and Pijlman, H.H. and Huetink, J. and Vegter, H. (1997) A Planar Anisotropic Yield Function Based on Multi Axial Stress States in Finite Elements. In: COMPLAS V, 5th International Conference on Computational Plasticity, March 17-20, 1997, Barcelona, Spain.

Carleer, B.D. (1997) Finite element analysis of deep drawing. thesis.

Meinders, T. and Carleer, B.D. and Vegter, H. and Huetink, J. (1997) Recent developments in finite element simulations of the deep drawing process. In: Sheet Metal 1997, 8 - 10 April 1997, Ulster, United Kingdom.

1996

Berg van den, Peter and Borst de, Rene and Huetink, Han (1996) An Eulerean finite element model for penetration in layered soil. International Journal for Numerical and Analytical Methods in Geomechanics, 20 (12). pp. 865-886. ISSN 0363-9061

Carleer, B.D. and Huetink, J. (1996) Closing the Gap between the Workshop and Numerical Simulations in Sheet Metal Forming. In: ECCOMAS Conference on Numerical Methods in Engineering ; 2 (Paris, France), 9-13 September 1996, Paris.

Carleer, Bart D. and Meinders, Timo and Huetink, Han (1996) Equivalent drawbead model in finite element simulations. In: NUMISHEET '96, Third International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes, September 29 - October 3, 1996, Dearborn, Michigan.

1995

Vreede, P.T. and Carleer, B.D. and Louwes, M.F.M. and Huetink, J. (1995) Finite-element simulation of sheet-forming processes with the help of contact elements on small-scale workstations. Journal of Materials Processing Technology, 50 (1-4). pp. 264-276. ISSN 0924-0136

1994

Carleer, B.D. and Vreede, P.T. and Louwes, M.F.M. and Huetink, J. (1994) Modelling drawbeads with finite elements and verification. Journal of Materials Processing Technology, 45 (1-4). pp. 63-68. ISSN 0924-0136

1991

Geijselaers, H.J.M. and Tijdeman, H. (1991) The dynamic mechanical characteristics of a resonating microbridge mass-flow sensor. Sensors and Actuators A: Physical, 29 (1). pp. 37-41. ISSN 0924-4247

1990

Huetink, J. and Vreede, P.T. and Lugt van der, J. (1990) Progress in mixed Eulerian-Lagrangian finite element simulation of forming processes. International Journal for Numerical Methods in Engineering, 30 (8). pp. 1441-1457. ISSN 0029-5981

1986

Lugt van der, J. and Huetink, J. (1986) Thermal mechanically coupled finite element analysis in metal-forming processes. Computer Methods in Applied Mechanics and Engineering, 54 (2). pp. 145-160. ISSN 0045-7825

1985

Huisman, H.J. and Huetink, J. (1985) A combined eulerian-lagrangian three-dimensional finite-element analysis of edge-rolling. Journal of Mechanical Working Technology, 11 (3). pp. 333-353. ISSN 0378-3804

This list was generated on Mon Mar 11 07:18:06 2013 CET.