Research Chair: Mechanics of Forming Technology (MFT)

These publication lists might not be complete. Publications are added regularly.

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1991 | 1990 | 1986 | 1985
Number of items: 433.

2016

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Meinders, V.T. and Boogaard, A.H. van den (2016) Determination of strain hardening parameters of tailor hardened boron steel up to high strains using inverse FEM optimization and strain field matching. Journal of materials processing technology, 228 . 43 - 58. ISSN 0924-0136

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Geijselaers, H.J.M. and Meinders, V.T. and Boogaard, A.H. van den (2016) The softened heat-affected zone in resistance spot welded tailor hardened boron steel: a material model for crash simulation. In: International Conference on Impact Loading of Structures and Materials (ICILSM), 22-05-2016 - 26-05-2016, Turin.

2015

Torkabadi, A. and Liempt, P. van and Meinders, V.T. and Boogaard, A.H. van den (2015) A constitutive model for the anelastic behavior of Advanced High Strength Steels. In: COMPLAS XIII, 01-09-2015 - 03-09-2015, Barcelona (pp. 378 - 385).

Mulder, J. and Vegter, H. and Aretz, H. and Keller, S. and Boogaard, A.H. van den (2015) Accurate determination of flow curves using the bulge test with optical measuring systems. Journal of materials processing technology, 226 . 169 - 187. ISSN 0924-0136

Mulder, J. and Eyckens, P. and Boogaard, A.H. van den (2015) Differential hardening in IF steel - Experimental results and a crystal plasticity based model. In: 8th Forming Technology Forum, 29-06-2015 - 30-06-2015, Zurich (pp. 113 - 118).

Sigvant, M. and Hol, J. and Chezan, A.R. and Boogaard, A.H. van den (2015) Friction modelling in sheet metal forming simulations: application and validation on an U-Bend product. In: 8th Forming Technology Forum, 29-06-2015 - 30-06-2015, Zurich (pp. 135 - 142).

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Meinders, V.T. and Boogaard, A.H. van den (2015) Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel. In: 16th International Conference on Sheet Metal, Erlangen-Nürnberg, 16-18 March 2015, 16-03-2015 - 18-03-2015, Erlangen-Nürnberg (pp. 369 - 376).

Havinga, G.T. and Boogaard, A.H. van den (2015) Inverse identification of process variations for thin steel sheet bending. In: ESAFORM 2015, 15-04-2015 - 17-04-2015 (pp. 1363 - 1368).

Perdahcioglu, E.S. and Hou, B. and Boogaard, A.H. van den (2015) Physically based criterion for prediction of instability under stretchbending of sheet metal. Key engineering materials, 651-653 . 144 - 149. ISSN 1013-9826

Wiebenga, J.H. and Atzema, E.H. and Boogaard, A.H. van den (2015) Stretching the limits of forming processes by robust optimization: A numerical and experimental demonstrator. Journal of materials processing technology, 217 . 345 - 355. ISSN 0924-0136

2014

Boogaard, A.H. van den and Hora, P. and Volk, W. , eds. (2014) 7th Forming Technology Forum, Warm and Hot Forming : proceedings. University of Twente, Faculty of Engineering Technology, Enschede, the Netherlands. ISBN 9789036537346

Naghibi Beidokhti, Hamid and Khoshgoftar, Mehdi and Sprengers, A.M.J. and Boogaard, A.H. van den and Janssen, D.W. and Verdonschot, N.J.J. (2014) A Comparison Between Dynamic Implicit And Explicit Finite Element Simulations Of Native Knee Joint. In: Computer Methods in Biomechanics and Biomedical Engineering 2014, 13-10-2014 - 15-10-2015, Amsterdam (pp. 255 - 256).

Karupannasamy, D.K. and Hol, J. and Rooij, M.B. de and Meinders, V.T. and Schipper, D.J. (2014) A friction model for loading and reloading effects in deep drawing process. Wear, 318 (1-2). 27 - 39. ISSN 0043-1648

Hol, J. and Wiebenga, J.H. and Dane, C. and Meinders, V.T. and Boogaard, A.H. van den (2014) A software solution for advanced friction modeling applied to sheet metal forming. In: IDDRG 2014, 02-06-2014 - 05-06-2014, Paris (pp. 344 - 349).

Emmens, W.C. and Boogaard, A.H. van den (2014) A yield criterion based on mean shear stress. Key engineering materials, 611-612 . 3 - 10. ISSN 1013-9826

Dallinger, F.N. and Roux, E.P. and Havinga, G.T. and d'Ippolito, R. and Tijum, R. van and Ravenswaaij, R. van and Hora, P. and Boogaard, A.H. van den (2014) Adaptive process control strategy for a two-step bending process. In: SDM'2014, International Conference on Sustainable Design and Manufacturing, Cardiff, 28-30 April 2014, 28-04-2014 - 30-04-2014, Cardiff (pp. 618 - 627).

Meinders, V.T. and Hol, J. and Boogaard, A.H. van den (2014) Boundary and Mixed Lubrication Friction Modeling under forming process conditions. In: Numisheet 2014, 06-01-2014 - 10-01-2014, Melbourne (pp. 912 - 917).

Wiebenga, J.H. and Atzema, E.H. and An, Y.G. and Vegter, H. and Boogaard, A.H. van den (2014) Effect of material scatter on the plastic behavior and stretchability in sheet metal forming. Journal of materials processing technology, 214 (2). 238 - 252. ISSN 0924-0136

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Meinders, V.T. and Boogaard, A.H. van den (2014) Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel. In: 7th Forming Technology Forum, 15-09-2014 - 16-09-2014, Enschede (pp. 55 - 62).

Havinga, G.T. and Boogaard, A.H. van den and Dallinger, F.N. and Hora, P. (2014) Inline control of a strip bending process in mass production. In: IDDRG, 01-06-2014 - 04-06-2014, Paris (pp. 175 - 180).

Yue, Z. M. and Badreddine, H. and Saanouni, K. and Perdahcioglu, E.S. and Soyarslan, C. and Tekkaya, A. E. and Boogaard, A.H. van den (2014) On the distortion of yield surface under complex loading paths in sheet metal forming. In: IDDRG, 01-06-2014 - 04-06-2014, Paris (pp. 246 - 251).

Wiebenga, J.H. and Boogaard, A.H. van den (2014) On the effect of numerical noise in approximate optimization of forming processes using numerical simulations. International journal of material forming, 7 (3). 317 - 335. ISSN 1960-6206

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Hatscher, A. and Meinders, V.T. and Boogaard, A.H. van den (2014) Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties. Journal of materials processing technology, 214 (6). 1211 - 1227. ISSN 0924-0136

Wiebenga, Jan Harmen (2014) Robust design and optimization of forming processes. thesis.

Dallinger, F.N. and Roux, E.P. and Hora, P. and Barlat, F. and Boogaard, A.H. van den (2014) Strain path dependent evolution of yield locus based on HAH model description. In: IDDRG 2014, Paris, June 1-4, 01-06-2014 - 04-06-2015, Paris (pp. 163 - 168).

Wiebenga, J.H. and Atzema, E.H. and Boogaard, A.H. van den (2014) Stretching the limits of forming processes by robust optimization: A demonstrator. In: NUMISHEET 2014 Conference, 06-01-2014 - 10-01-2014, Melbourne (pp. 1061 - 1067).

Hou, B. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Kitting, D. (2014) Study on instability and forming limit of sheet metal under stretch-bending. Key engineering materials, 611-612 . 84 - 91. ISSN 1013-9826

Vegter, Henk and Mulder, Hans and Liempt, Peter van and Heijne, Jan (2014) Tailored Work Hardening Descriptions in Simulation of Sheet Metal Forming. In: Numisheet 2014, 06-01-2014 - 10-01-2014, Melbourne (pp. 474 - 481).

2013

Niazi, M.S. and Meinders, V.T. and Wisselink, H.H. and Horn, C.H.L.J. ten and Klaseboer, G. and Boogaard, A.H. van den (2013) A Plasticity Induced Anisotropic Damage Model for Sheet Forming Processes. Key engineering materials, 554-557 . 1245 - 1251. ISSN 1013-9826

Wiebenga, J.H. and Atzema, E.H. and Boterman, R. and Abspoel, M. and Boogaard, A.H. van den (2013) Accounting for material scatter in sheet metal forming simulations. In: IDDRG 2013 conference, 02-06-2013 - 05-06-2013, Zurich (pp. 57 - 62).

Mulder, J. and Vegter, H. and Aretz, H. and Boogaard, A.H. van den (2013) Accurate evaluation method for the hydraulic bulge test. Key engineering materials, 554-557 . 33 - 40. ISSN 1013-9826

Hol, J. and Dane, C.M. and Meinders, V.T. (2013) Calculated coefficients of friction as input for finite element simulations. In: Triboforum 2013, Tribologische Entwicklungen in der Umformtechnik, Darmstadt, 19-20 Juni 2013, 19-20 Juni 2013, Darmstadt.

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. Key engineering materials, 554-557 . 1014 - 1021. ISSN 1013-9826

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. In: ESAFORM 2013, 22-04-2013 - 24-04-2013, Aveiro (pp. 1014 - 1021).

Eller, T.K. and Greve, L and Anders, M.T. and Medricky, M and Hatscher, A and Meinders, V.T. and Boogaard, A.H. van den (2013) Constitutive modeling of quench-hardenable boron steel with tailored properties. In: 6th Forming Technology Forum: Modelling of process chains and interfaces for sheet metal forming, Herrsching, 19-20 September 2013, 19-09-2013 - 20-09-2013, Herrsching (pp. 1 - 6).

Kitting, D. and Ofenheimer, A. and Boogaard, A.H. van den and Dietmaier, P. (2013) Deformation scenarios of combined stretching and bending in complex shaped deep drawing parts. Key engineering materials, 554 - 557 . 1252 - 1264. ISSN 1013-9826

Hol, J. and Meinders, V.T. and Boogaard, A.H. van den (2013) Experimental and numerical friction characterization for large-scale forming simulations. In: IDDRG 2013, Zurich, Switzerland, June 2-5 2013, 02-06-2013 - 05-06-2013, Zurich (pp. 337 - 342).

Clausmeyer, T. and Gerstein, G. and Bargmann, S. and Svendsen, B. and Boogaard, A.H. van den and Zillmann, B. (2013) Experimental characterization of microstructure development during loading path changes in bcc sheet steels. Journal of materials science, 48 (2). 674 - 689. ISSN 0022-2461

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Boogaard, A.H. van den (2013) Material Induced Anisotropic Damage in DP600. International journal of damage mechanics, 22 (7). 1039 - 1070. ISSN 1530-7921

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2013) Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels. In: The 11th International Conference on Numerical Methods in Forming Processes, NUMIFORM2013, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 175 - 182).

Hol, Johan (2013) Multi-scale friction modeling for sheet metal forming. thesis.

Wiebenga, J.H. and Weiss, M. and Rolfe, B. and Boogaard, A.H. van den (2013) Product defect compensation by robust optimization of a cold roll forming process. Journal of materials processing technology, 213 . 978 - 986. ISSN 0924-0136

Havinga, G.T. and Boogaard, A.H. van den and Klaseboer, G. (2013) Sequential optimization of strip bending process using multiquadric radial basis function surrogate models. In: 16th ESAFORM Conference on Material Forming, April 22-24, 2013, Aveiro, Portugal, 22-04-2013 - 24-04-2013, Aveiro, Portugal.

Havinga, G.T. and Boogaard, A.H. van den and Klaseboer, G. (2013) Sequential optimization of strip bending process using multiquadric radial basis function surrogate models. Key engineering materials, 554-557 . 911 - 918. ISSN 1013-9826

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Akkerman, R. (2013) Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of gamma-texture. Materials science & engineering A, 573 . 100 - 105. ISSN 0921-5093

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. (2013) The influence of austenite texture on the martensitic transformation of an austenitic stainless steel. Journal of alloys and compounds, 577S . 609 - 613. ISSN 0925-8388

Hilkhuijsen, P. (2013) The influence of texture on phase transformation in metastable austenitic stainless steel. thesis.

Ravenswaaij, R. van and Tijum, R. van and Hora, P. and Boogaard, A.H. van den and Engel, U. (2013) Towards zero-defect manufacturing of smal metal parts. In: IDDRG 2013, 02-06-2013 - 05-06-2013, Zurich (pp. 87 - 92).

2012

Geijselaers, H.J.M. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2012) A macro scale constitutive model for TRIP steel. In: ECCOMAS 2012, September 10-14, 2012, Vienna, Austria (pp. CD-ROM ).

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2012) A macroscopic model to simulate the mechanically induced martensitic transformation in metastable austenitic stainless steels. Acta materialia, 60 (11). 4409 - 4419. ISSN 1359-6454

Boogaard, A.H. van den and Quak, W. (2012) Adaptive smoothed FEM for forming simulations. In: ECCOMAS 2012, September 10-14, 2012, Vienna, Austria (pp. CD-ROM ).

Wisselink, H.H. and Nagy, G.T. and Meinders, V.T. (2012) Application of Wrinkling Criterion for Prediction of Side-Wall Wrinkles in Deepdrawing of Conical Cups. In: International Deep Drawing Research Group Conference 2012: Lightweighting: Possibilities & Challenges, 25-29 November 2012, Mumbai (pp. 301 - 306).

Mulder, J. and Vegter, H. and Ha, J.J. and Boogaard, A.H. van den (2012) Determination of flow curves under equibiaxial stress conditions. Key engineering materials, 504-506 . 53 - 58. ISSN 1013-9826

Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Ellenbroek, M.H.M. and Boer, A. de (2012) Dynamic substructuring and reanalysis methods in a surrogate based design optimization environment. Structural and multidisciplinary optimization, 45 . 129 - 138. ISSN 1615-147X

Hadoush, A. and Boogaard, A.H. van den (2012) Efficient implicit simulation of incremental sheet forming. International journal for numerical methods in engineering, 90 (5). 597 - 612. ISSN 0029-5981

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Huetink, J. (2012) Failure Predictions for DP Steel Cross-die Test Using Anisotropic Damage. International journal of damage mechanics, 21 . 713 - 754. ISSN 1530-7921

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Huetink, J. (2012) Free surface modeling of contacting solid metal flows employing the ALE formulation. In: ESAFORM 2012, 14-03-2012 - 16-03-2012, Erlangen (pp. 431 - 436).

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Boogaard, A.H. van den (2012) Material Induced Anisotropic Damage. In: 5th Forming Technology Forum 2012, June 5-6, 2012, Zurich (pp. 23 - 28).

Emmens, W.C. and Boogaard, A.H. van den (2012) Material characterization at high strain by adapted tensile tests. Experimental mechanics, 52 (8). 1195 - 1209. ISSN 0014-4851

Karupannasamy, D.K. and Hol, J. and Rooij, M.B. de and Meinders, V.T. and Schipper, D.J. (2012) Modelling mixed lubrication for deep drawing processes. Wear, 294-295 . 296 - 304. ISSN 0043-1648

Niazi, M.S. (2012) Plasticity induced anisotropic damage modeling for forming processes. thesis.

Wiebenga, J.H. and Boogaard, A.H. van den and Klaseboer, G. (2012) Sequential robust optimization of a V-bending process using numerical simulations. Structural and multidisciplinary optimization, 46 (1). 137 - 153. ISSN 1615-147X

Niazi, M.S. and Wisselink, H.H. and Meinders, T. (2012) Validation of Modified Lemaitre’s Anisotropic Damage Model with the Cross Die Drawing Test. Key Engineering Materials, 488 . 49 - 52. ISSN 1013-9826

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. (2012) Viscoplastic Regularization of Local Damage Models: A Latent Solution. Key engineering materials, 504-506 . 845 - 850. ISSN 1013-9826

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. (2012) Viscoplastic regularization of local damage models: revisited. Computational mechanics, 51 (2). 203 - 216. ISSN 0178-7675

2011

Hol, J. and Cid Alfaro, M.V. and Meinders, T. and Huetink, J. (2011) A Multi-scale Friction Model for Sheet Metal Forming Simulations. In: 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2011, 21-26 August 2011, Seoul, South Korea (pp. 784 - 791).

Quak, W. and Boogaard, A.H. van den and Gonzalez, D. and Cueto, E. (2011) A comparative study on the performance of meshless approximations and their integration. Computational Mechanics, 48 (2). pp. 121-137. ISSN 0178-7675

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2011) A model for TRIP steel constitutive behaviour. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Hol, J. and Meinders, V.T. and Huetink, J. (2011) A multi-scale friction model framework for full scale sheet forming simulations. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 207 - 212).

Hadoush, A. and Boogaard, A.H. van den and Emmens, W.C. (2011) A numerical investigation of the continuous bending under tension test. Journal of Materials Processing Technology, 211 (12). 1948 - 1956. ISSN 0924-0136

Quak, W. and Boogaard, A.H. van den (2011) Adaptive Smoothed Finite Elements (ASFEM) for history dependent material models. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 1197 - 1202).

Hol, J. and Cid Alfaro, M.V. and Meinders, V.T. and Huetink, J. (2011) Advanced friction modeling in sheet metal forming. Key Engineering Materials, 473 . 715 - 722. ISSN 1013-9826

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Quak, W. and Akkerman, R. and Huetink, J. (2011) Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 1290 - 1295).

Perdahcioglu, E. Semih and Geijselaers, H.J.M. (2011) Constitutive modeling of multiphase materials including phase transformations. In: International Symposium on Plasticity and Its Current Applications, January 3-8, 2011, Puerto Vallarta, Mexico.

De Guido, Samuele and Geijselaers, H.J.M. and Boer, André de (2011) Continuous-discrete variable optimization on composites using kriging surrogate model. In: 16th International Conference on Composite Structures, ICCS 2011, 28-30 June 2011, Porto, Portugal.

Emmens, W.C. and Boogaard, A.H. van den (2011) Cyclic stretch-bending: mechanics, stability and formability. Journal of Materials Processing Technology, 211 (12). 1965 - 1981. ISSN 0924-0136

Snippe, Quirin Hendrik Catherin (2011) Design and optimization of vertex detector foils by superplastic forming. thesis.

Wiebenga, J.H. and Klaseboer, G. and Boogaard, A.H. van den (2011) Efficient Robust Optimization of Metal Forming Processes using a Sequential Metamodel Based Strategy. In: 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2011, 21-26 August 2011, Seoul, South Korea (pp. 978 - 985).

Emmens, W.C. and Boogaard, A.H. van den (2011) Formability in incremental sheet forming and cyclic stretch-bending. Steel Research International . 513 - 518. ISSN 1611-3683

Martinez Lopez, A. and Boogaard, A.H. van den (2011) Formability limit curves under stretch-bending. In: 15th International Deep Drawing Research Group Conference, IDDRG 2011, 5-8 June 2011, Bilbao, Spain.

Snippe, Q.H.C. and Meinders, T. (2011) Mechanical experiments on the superplastic material ALNOVI-1, including leak information. Materials Science and Engineering A: Structural materials, 528 (3). pp. 950-960. ISSN 0025-5416

De Guido, S. and Geijselaers, H.J.M. and Boer, A. de (2011) Mixed continuous-discrete variable optimization of composite panels using surrogate models. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

De Guido, S. and Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Boer, A. de (2011) On a novel approach for optimizing composite materials panel using surrogate models. In: 3rd ECCOMAS Thematic Conference on Mechanical Response of Composites 2011, 21-23 September 2011, Hannover, Germany (pp. 439 - 446).

Quak, Wouter (2011) On meshless and nodal-based numerical methods for forming processes. thesis.

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2011) Prediction of the mechanical behaviour of TRIP steel. In: 10th International Conference on the Technology of Plasticity, ICTP 2011, September 25th-30th, 2011, Aachen.

Wiebenga, J.H. and Klaseboer, G. and Boogaard, A.H. van den (2011) Robust optimization of metal forming processes using a metamodel-based strategy. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 11 - 16).

Kurukuri, Srihari and Miroux, Alexis and Wisselink, Harm and Boogaard, Ton van den (2011) Simulation of stretch forming with intermediate heat treatments of aircraft skins - a physically based modeling approach. International Journal of Material Forming, 4 (2). 129 - 140. ISSN 1960-6206

Emmens, W.C. and Boogaard, A.H. van den (2011) The stabilizing effect of bending-under-tension. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 1583 - 1588).

Boogaard, A.H. van den and Krauer, J. and Hora, P. (2011) Transformation in Austenitic Stainless Steel Sheet under Different Loading Directions. Key Engineering Materials, 473 . pp. 444-451. ISSN 1013-9826

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Geijselaers, H.J.M. and Boer, A. de (2011) Updating the Craig–Bampton reduction basis for efficient structural reanalysis. International Journal for Numerical Methods in Engineering, 85 (5). pp. 607-624. ISSN 0029-5981

Wisselink, H.H. and Niazi, M.S. and Huetink, J. (2011) Validation of advanced material models using the crossdie test. In: IDDRG Conference 2011: Towards sutainable sheet forming processes, 5-8 June 2011, Bilbao, Spain.

2010

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2010) A constitutive model for multi-phase steels. In: Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France.

Assaad, Wissam Ali (2010) Aluminum extrusion with a deformable die. thesis.

Quak, W. and Boogaard, A.H. van den (2010) An adaptive method for history dependent materials. In: World Congress on Computational Mechanics, 1-2 October 2010, The Hague (pp. 187 - 188).

Noordermeer, J.W.M. and Boer, A. de and Huerne, H.L. ter and Schipper, D.J. and Meinders, V.T. (2010) Beïnvloeden bandeigenschappen de schade-ontwikkeling van de weg. In: CROW Infradagen 2010, 23-24 Juni 2010, Papendal, Netherlands.

Perdahcioglu, E. Semih and Geijselaers, Hubert J.M. (2010) Constitutive modeling of two phase materials using the Mean Field method for homogenization. International Journal of Material Forming, 4 (2). pp. 93-102. ISSN 1960-6206

Emmens, W.C. and Boogaard, A.H. van den (2010) Contact effects in bending affecting stress and formability. International journal of material forming, 3 (1). pp. 1159-1162. ISSN 1960-6206

Assaad, W. and Geijselaers, H.J.M. (2010) Coupled analysis of material flow and die deflection in direct aluminum extrusion. In: Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France.

Boogaard, A.H. van den and Emmens, W.C. and Huetink, J. (2010) Effect of Thickness Stress in Stretch-Bending. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 504 - 511).

Martínez López, Alejandro and Boogaard, A.H. van den (2010) Effect of bending on formability limits. In: XVI Congreso Internacional Anual de la SOMIM 2010, September 22-24, 2010, Nuevo Leon, Mexico.

Hadoush, A. and Boogaard, A.H. van den (2010) Efficient implicit simulation for incremental forming. In: IV European Congress on Computational Mechanics ECCM IV: Solids, Structures and Coupled Problems in Engineering, May 16-21, 2010, Paris, France.

Hadoush, Ashraf Moh’d Hasan (2010) Efficient simulation and process mechanics of incremental sheet forming. thesis.

Noman, M. and Clausmeyer, T. and Barthel, C. and Svendsen, B. and Huetink, J. and Riel, M. van (2010) Experimental characterization and modeling of the hardening behavior of the sheet steel LH800. Materials Science and Engineering A: Structural materials . ISSN 0025-5416

Emmens, W.C. and Kazantzis, A.V. and Hosson, J.Th.M. de and Boogaard, A.H. van den (2010) Fractional behaviour at cyclic stretch-bending. In: 50th IDDRG Anniversary Conference, May 31 - June 2, 2010, Graz, Austria (pp. 613 - 622).

Derikx, L.C. and Vis, R. and Meinders, T. and Verdonschot, N. and Tanck, E. (2010) Implementation of Asymmetric Yielding in Case Specific Finite Element Models improves the Prediction of Femoral Fracture Risk. In: 18th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, March 5, 2010, New Orleans, USA (pp. 18 - ).

Niazi, Muhammad and Wisselink, Harm and Meinders, Timo and Horn, Carel ten (2010) Implementation of an anisotropic damage material model using general second order damage tensor. In: 13th International Conference on Metal Forming, Metal Forming 2010, September 19-22, 2010, Toyohashi, Japan (pp. 1396 - 1399).

Fictorie, E. and Boogaard, A.H. van den and Atzema, E.H. (2010) Influence of Punch Radius in a Nakazima Test for Mild Steel and Aluminium. International Journal of Material Forming, 3 (Suppl. 1). 1179 - 1182. ISSN 1960-6206

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2010) Mean field modeling of metastable austenitic stainless steel. In: International Symposium on Plasticity, January 3-8, 2010, St. Kitts.

Miroux, Alexis and Ghosh, Manojit and Kurukuri, Srihari and Kestens, Leo and Boogaard, Ton van den (2010) Mechanical and forming properties of AA6xxx sheet from room to warm temperatures. In: 12th International Conference on Aluminium Alloys, ICAA, September 5-9, 2010, Yokohama, Japan (pp. 1243 - 1248).

Wisselink, H.H. and Huetink, J. (2010) Modelling of failure in sheet forming using cohesive elements. In: 9th World Congress on Computational Mechanics & 4th Asian Pacific Congress on Computational Mechanics, WCCM/APCOM 2010, July 19-23, 2010, Sydney (pp. - ).

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2010) Mould filling analysis of aluminium extrusion dies. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 290 - 295).

Hol, J. and Cid Alfaro, M.V. and Rooij, M.B. de and Meinders, V.T. (2010) Multiscale friction modeling for sheet metal forming. In: International Conference on Tribology in Manufacturing Processes, ICTMP 2010, June 13-15, 2010, Nice, France (pp. 573 - 582).

Boogaard, A.H. van den and Riel, M. van (2010) Non-proportional deformation paths for sheet metal - experiments. In: Plasticity 2010, January 3-8, 2010, St. Kitts (pp. 223 - 225).

Martinez-Lopez, A. and Boogaard, A.H. van den (2010) Numerical Determination of Sheet Metal Formability under Simultaneous Stretching and Bending. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France (pp. pp. 413-418).

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Boer, A. de (2010) On the coupling of reanalysis techniques with a surrogate-based design optimization method. In: 27th international congress of the Aeronautical Sciences, ICAS, 19-24 Sept. 2010, Nice, France.

Owczarek, Pawel (2010) On the design of lubricant free piston compressors. thesis.

Bonte, Martijn H.A. and Fourment, Lionel and Do, Tien-tho and Boogaard, A.H. van den and Huetink, J. (2010) Optimization of forging processes using Finite Element simulations : A comparison of Sequential Approximate Optimization and other algorithms. Structural and Multidisciplinary Optimization, 42 (5). 797 - 810. ISSN 1615-147X

Wiebenga, J.H. (2010) Optimization under uncertainty of metal forming processes - an overview : literature report. [Report]

Kurukuri, Srihari (2010) Simulation of thermally assisted forming of aluminium sheet. thesis.

Atzema, E.H. and Fictorie, E. and Boogaard, A.H. van den and Droog, J.M.M. (2010) The influence of curvature on FLC’s of mild steel, (A)HSS and aluminium. In: IDDRG 2010 International Conference, May 31 - June 2, 2010, Graz, Austria (pp. 519 - 528).

Emmens, W.C. and Sebastiani, G. and Boogaard, A.H. van den (2010) The technology of Incremental Sheet Forming - a brief review of the history. Journal of Materials Processing Technology, 210 (8). pp. 981-997. ISSN 0924-0136

Kurukuri, S. and Boogaard, A.H. van den and Ghosh, M. and Miroux, A. (2010) Thermo-mechanical Forming of Al–Mg–Si Alloys: Modeling and Experiments. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 810 - 817).

2009

Dikmen, Emre and Hoogt, Peter van der and Boer, André de and Aarts, Ronald and Jonker, Ben (2009) A flexible rotor on flexible supports: modeling & experiments. In: ASME 2009 International Mechanical Engineering Congress & Exposition IMECE 2009, November 13-19, Lake Buena Vista, Florida, USA.

Datta, K. and Delhez, R. and Bronsveld, P.M. and Beyer, J. and Geijselaers, H.J.M. and Post, J. (2009) A low-temperature study to examine the role of epsilon-martensite during strain-induced transformations in metastable austenitic stainless steels. Acta materialia, 57 (11). 3321 - 3326. ISSN 1359-6454

Kurukuri, Srihari and Miroux, Alexis and Ghosh, Manojit and Boogaard, Ton van den (2009) An advanced material model for aluminum sheet forming at elevated temperatures. In: COMPLAS X, 2-4 September 2009, Barcelona, Spain.

Emmens, W.C. and Boogaard, A.H. van den (2009) An overview of stabilizing deformation mechanisms in incremental sheet forming. Journal of Materials Processing Technology, 209 (8). pp. 3688-3695. ISSN 0924-0136

Koopman, Albertus Johannes (2009) Analysis tools for the design of aluminium extrusion dies. thesis.

Assaad, W. and Geijselaers, H.J.M. and Huetink, J. (2009) Boundary conditions applied on bearing corner in direct aluminum extrusion. In: Esaform 2009, the 12th International ESAFORM Conference on Material Forming, April 27-29, 2009, Enschede.

Ouwerkerk, Gijs van (2009) CAD implementation of design rules for aluminium extrusion dies. thesis.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2009) Constitutive modeling of metastable austenitic stainless steel. International Journal of Material Forming, 2 (Suppl.). pp. 419-422. ISSN 1960-6206

Reinders, A.H.M.E. and Wit, H. de and Boer, A. de (2009) Design of fibre reinforced PV concepts for building integrated applications. In: 24th EU PVSEC, 21-25 September 2009, Hamburg (pp. pp. 3940-3944).

Reinders, Angele and Boer, André de and Winter, Arjan de and Haverlag, Marco (2009) Designing PV powered LED products - integration of PV technology in innovative products. In: 24th EU PVSEC, 21-25 September 2009, Hamburg (pp. pp. 3179-3183).

Kurukuri, S. and Miroux, A. and Ghosh, M. and Boogaard, A.H. van den (2009) Effect of temperature on anisotropy in forming simulations of aluminum alloys. International Journal of Material Forming, 2 (Suppl.). 387 - 390. ISSN 1960-6206

Snippe, Q.H.C. and Meinders, V.T. (2009) Extracting material data for superplastic forming simulations. In: IDDRG, 1-3 June 2009, Golden, CO.

Niazi, M.S. and Wisselink, H.H. and Meinders, T. and Huetink, J. (2009) Implementation of an anisotropic damage material model for non-proportional loading. In: COMPLAS X, International Conference on Computational Plasticity, 2-4 September 2009, Barcelona.

Emmens, W.C. and Boogaard, A.H. van den (2009) Incremental forming by continuous bending under tension - an experimental investigation. Journal of Materials Processing Technology, 209 (14). 5456 - 5463. ISSN 0924-0136

Emmens, W.C. and Boogaard, A.H. van den (2009) Incremental sheet forming analysed by tensile tests. Key Engineering Materials, 410-41 . 347 - 354. ISSN 1013-9826

Niazi, M.S. (2009) Literature study report of plasticity induced anisotropic damage modeling for forming processes. [Report]

Assaad, W. and Geijselaers, H.J.M. and Nilsen, K.E. (2009) Measuring the Deformation of a Flat Die by Applying a Laser Beam on a Reflecting Surface. Key Engineering Materials, 424 . 197 - 204. ISSN 1013-9826

Geijselaers, H.J.M. and Perdahcioglu, E.S. (2009) Mechanically induced martensitic transformation as a stress-driven process. Scripta Materialia, 60 (1). 29 - 31. ISSN 1359-6462

Quak, W. and Boogaard, A.H. van den and Huetink, J. (2009) Meshless methods and forming processes. International Journal of Material Forming, 2 (Suppl.). 585 - 588. ISSN 1960-6206

Wisselink, H.H. and Klaseboer, G. and Huetink, H. (2009) Modelling of a burr-free blanking process. International journal of material forming, 2 (Suppl.). pp. 539-542. ISSN 1960-6206

Wisselink, H.H. and Huetink, J. (2009) Modelling of ductile failure in metal forming. In: 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Post, J. and Klaseboer, G. and Stinstra, E. and Amstel, T. van and Huetink, J. (2009) Multi-stage metal forming: Variation and transformation. Journal of Materials Processing Technology, 209 (5). pp. 2648-2661. ISSN 0924-0136

Quak, W. and Boogaard, A.H. van den (2009) Nodal integration of meshless methods. In: International Conference on Particle-Based Methods, Particles 2009, 25-27 November 2009, Barcelona, Spain.

Boogaard, A.H. van den and Riel, M. van (2009) Non-proportional deformation paths for sheet metal: experiments and models. In: 3rd Forming Technology Forum Zurich 2009 - Constitutive Modeling of Kinematic and Anisotropic Hardening Effects for Ductile Materials, May 5-6, 2009, Zurich, Switzerland (pp. 57 - 62).

Hadoush, A. and Boogaard, A.H. van den (2009) On the performance of substructuring implicit simulation of single point incremental forming. International Journal of Material Forming, 2 (Suppl. 1). pp. 559-562. ISSN 1960-6206

Quak, W. and Gonzalez, D. and Cueto, E. and Boogaard, A.H. van den (2009) On the use of local max-ent shape functions for the simulation of forming processes. In: X International Conference on Computational Plasticity, COMPLAS X, 2-4 September 2009, Barcelona, Spain.

Riel, Maarten van (2009) Strain path dependency in sheet metal : experiments and models. thesis.

Hadoush, A. and Boogaard, A.H. van den (2009) Substructuring in the implicit simulation of single point incremental sheet forming. International Journal of Material Forming, 2 (3). 181 - 189. ISSN 1960-6206

Snippe, Q.H.C. and Meinders, V.T. (2009) Superplastic forming simulation of RF detector foils. In: 12th International ESAFORM Conference on Material Forming, April 27-29, 2009, Enschede, The Netherlands.

Emmens, W.C. and Boogaard, A.H. van den and Weijde, D.H. van der (2009) The FLC, enhanced fromavbility, and incremental sheet forming. In: IDDRG, 1-3 June 2009, Golden, USA (pp. 773 - 784).

Dikmen, Emre and Hoogt, Peter van der and Boer, André de and Aarts, Ronald and Jonker, Ben (2009) Thermal modeling of a mini rotor-stator system. In: ASME 2009 International Mechanical Engineering Congress & Exposition IMECE 2009, November 13-19, Lake Buena Vista, Florida, USA.

Boogaard, A.H. van den and Kurukuri, Srihari and Ghosh, Manojit and Miroux, Alexis G. (2009) Thermo-mechanical forming of Al-Mg-Si Sheet. Computer methods in materials science, 9 (1). 5 - 11. ISSN 1641-8581

Post, J. and Vries, C. de and Huetink, J. (2009) Validation tool for 2D multi-stage metal-forming processes on meta-stable stainless steels. Journal of Materials Processing Technology, 209 (15-16). pp. 5558-5572. ISSN 0924-0136

Kurukuri, S. and Boogaard, A.H. van den and Miroux, A. and Holmedal, B. (2009) Warm forming simulation of Al-Mg sheet. Journal of Materials Processing Technology, 209 (15-16). 5636 - 5645. ISSN 0924-0136

2008

Assaad, W.A. and Geijselaers, H.J.M. and Huetink, J. (2008) 3-D Numerical Simulation of Direct Aluminum Extrusion and Die Deformation. In: ET '08, the Conference for Innovations in Aluminum Extrusion, May 13-16, 2008, Gaylord Palms Orlando, FL, USA .

Post, J. and Datta, K. and Beyer, J. (2008) A macroscopic constitutive model for a metastable austenitic stainless steel. Materials Science and Engineering A: Structural materials, 485 (1-2). pp. 290-298. ISSN 0025-5416

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2008) An optimisation strategy for industrial metal forming processes. Structural and Multidisciplinary Optimization, 35 (6). pp. 571-586. ISSN 1615-147X

Quak, Wouter (2008) An overview of meshless methods for forming processes: literature report. [Report]

Lingbeek, R.A. and Meinders, T. and Ohnimus, S. (2008) Compensation of deep drawing tools for springback and tool-deformation. In: IDDRG 2008, International Deep-drawing Research Group International Conference, 16-18 June 2008, Olofstrom, Sweden (pp. pp. 475-486).

Perdahcioglu, Emin Semih (2008) Constitutive modeling of metastable austenitic stainless steel. thesis.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Constitutive modeling of metastable austenitic stainless steel. In: 11th ESAFORM2008 Conference on Material Forming, April 23-25, 2008, Lyon, France.

Post, J. and Nolles, H. and Datta, K. and Geijselaers, H.J.M. (2008) Experimental determination of the constitutive behaviour of a metastable austenitic stainless steel. Materials Science and Engineering A: Structural materials, 498 (1-2). pp. 179-190. ISSN 0025-5416

Boogaard, A.H. van den and Carleer, B.D. and Atzema, E.H. and Wijlen, E.V. ter (2008) Experimental validation of numerical sensitivities in a deep drawing simulation. International Journal of Material Forming . ISSN 1960-6206

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2008) Flow front tracking in ALE/Eulerian formulation FEM simulations of aluminium extrusion. Key Engineering Materials, 367 . pp. 39-46. ISSN 1013-9826

Burchitz, Igor Alexandrovich (2008) Improvement of springback prediction in sheet metal forming. thesis.

Perdahcıoğlu, E.S. and Geijselaers, H.J.M. and Groen, M. (2008) Influence of plastic strain on deformation-induced martensitic transformations. Scripta Materialia, 58 (11). pp. 947-950. ISSN 1359-6462

Perdahcıoğlu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Influence of stress state and strain path on deformation induced martensitic transformations. Materials Science and Engineering A: Structural materials, 481-48 (1-2). pp. 727-731. ISSN 0025-5416

Riel, M. van and Boogaard, A.H. van den (2008) Measurements and calculations on yield surfaces in tension-simple shear experiments. In: 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2008, September 1-5, 2008, Interlaken, Switzerland (pp. pp. 61-66).

Berisha, B. and Hora, P. and Tong, L. and Wahlen, A. and Boogaard, A.H. van den (2008) Modelling of Dynamic Strain Aging with a Dislocation-Based Isotropic Hardening Model and Investigation of Orthogonal Loading. In: ICTP 2008, international conference on technology of plasticity, September 7-11, 2008, Gyeungju, Korea (pp. pp. 339-344).

Wang, J. and Levkovitch, V. and Reusch, F. and Svendsen, B. and Huetink, J. and Riel, M. van (2008) On the modeling of hardening in metals during non-proportional loading. International Journal of Plasticity, 24 (6). pp. 1039-1070. ISSN 0749-6419

Carleer, Bart and Zwickl, Titus and Boogaard, Ton van den and Atzema, Eisso (2008) One day try-out, identifying influence and sensitivity in stamping. In: Numisheet 2008, 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, September 1-5, 2008, Interlaken, Switzerland (pp. pp. 829-834).

Wisselink, Harm and Huetink, Han (2008) Prediction of the bendability of sheet metals using nonlocal damage models. In: Metal forming 2008, 12th international conference, September 21-24, 2008, Krakow, Polska (pp. pp. 217-224).

Snippe, Corijn (2008) Superplasticiteit bij CERN. Appel . pp. 76-79. ISSN 2352-796X

Lingbeek, R.A. and Gan, W. and Wagoner, R.H. and Meinders, T. and Weiher, J. (2008) Theoretical verification of the displacement adjustment and springforward algorithms for springback compensation. International Journal of Material Forming, 1 (3). 159 - 168. ISSN 1960-6206

Hadoush, A. and Boogaard, A.H. van den (2008) Time reduction in implicit single point incremental sheet forming simulation by refinement - derefinement. International Journal of Material Forming . ISSN 1960-6206

Lingbeek, R.A. and Meinders, T. and Rietman, A. (2008) Tool And Blank Interaction In The Cross-Die Forming Process. International Journal of Material Forming, 1 (Suppl.). pp. 161-164. ISSN 1960-6206

Lingbeek, Roald Arnoud (2008) Virtual tool reworking. thesis.

2007

Bonte, M.H.A. and Boogaard, A.H. van den and Ravenswaaij, R. van (2007) A Robust Optimisation Strategy for Metal Forming Processes. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal (pp. pp. 493-498).

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. and Nilsen, K.E. and Koenis, P.T.G. (2007) A SUPG approach for determining frontlines in aluminium extrusion simulations and a comparison with experiments. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 602-607).

Trichon, S. and Bonte, M.H.A. and Boogaard, A.H. van den and Ponthot, J.-P. (2007) A Study For Efficiently Solving Optimisation Problems With An Increasing Number Of Design Variables. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal (pp. pp. 481-486).

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) A metamodel based optimisation algorithm for metal forming processes. In: Dorel Banabic (Ed.), Advanced Methods in Material Forming. Springer, pp. 55-72. ISBN 9783540698449

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2007) A stress integration algorithm for phase transforming steels. In: IX international conference on computational plasticity COMPLAS, 2007, Barcelona.

Burchitz, I. and Meinders, T. and Huetink, J. (2007) Accurate simulation of springback using adaptive integration [poster]. In: Tenth Engineering Mechanics Symposium, EM 2007, 11-12 October, 2007 , Lunteren, The Netherlands.

Burchitz, I.A. and Meinders, T. and Huetink, J. (2007) Adaptive Through-Thickness Integration Strategy for Shell Elements. In: International Conference in Numerical Methods in industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 699-704).

Burchitz, I. and Meinders, T. (2007) Adaptive through-thickness integration for accurate springback prediction. International Journal for Numerical Methods in Engineering, 75 (5). pp. 533-554. ISSN 0029-5981

Burchitz, I.A. (2007) Adaptive through-thickness integration strategy for shell elements. [Report]

Wisselink, H.H. and Huetink, J. (2007) Application of nonlocal damage models to sheet forming applications. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 521-524).

Trichon, Sophie and Bonte, Martijn and Ponthot, Jean-Philippe and Boogaard, Ton van den (2007) Aspects of approximate optimisation: overcoming the curse of dimensionality and design of experiments. In: Inverse Problems, Design and Optimization Symposium, April 16-18, 2007, Miami, Florida,U.S.A.

Boogaard, A.H. van den and Bonte, M.H.A. and Ravenswaaij, R. van (2007) Computational optimisation of robust sheet forming processes. In: IDDRG 2007 International Conference, 21-23 May 2007, Gyor, Hungary.

Riel, M. van and Boogaard, A.H. van den (2007) Consistent plane stress-3D conversion of hardening models and yield criteria. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 624-627).

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) Deterministic and robust optimisation strategies for metal forming proceesses. In: Forming Technology Forum 2007 – Application of Stochastics and Optimization Methods, 14th – 15th March 2007, ETH Zurich, Switzerland.

Snippe, Corijn H.C. and Meinders, T. (2007) FE-based radiation length analysis of superplastically formed products. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 770-773).

Kurukuri, S. and Boogaard, A.H. van den and Huetink, J. (2007) Finite element simulation of aluminum sheet warm forming using alflow hardening model. In: IX International Conference on Computational Plasticity, COMPLAS 2007, 5-7 September 2007, Barcelona, Spain (pp. pp. 635-638).

Thije, René Hermanus Willem ten (2007) Finite element simulations of laminated composite forming processes. thesis.

Emmens, W.C. and Boogaard, A.H. van den (2007) Formability created by the Bauschinger effect? In: 2nd International Conference on New Forming Technology, ICNFT 2007, September 20-21, 2007, Bremen, Germany (pp. pp. 79-86).

Wisselink, H.H. (2007) Forming the limits of damage predictions : from fundamentals to application WP4 [poster]. In: NIMR Congress, December 10-11, 2007, Noordwijkerhout, The Netherlands.

Vegter, H. and Horn, C.H.L.J. ten and Boogaard, A.H. van den (2007) Influence Of The Plastic Material Behaviour On The Prediction Of Forming Limits. In: NUMIFORM 2007, International Conference in Numerical Methods in Industrial Forming Processes, June 17-21, 2007, Porto, Portugal (pp. pp. 87-92).

Burchitz, I.A. (2007) Influence of discretisation error on springback prediction. [Report]

Snippe, C. (2007) Material modeling for the benefit of superplastic forming simulations [poster]. In: EM symposium 2007, 2007.

Datta, K. and Geijselaers, H.J.M. and Post, J. and Beyer, J. and Huetink, J. (2007) Modelling the Material Behaviour of Metastable Stainless Steels. In: Jose M.A. Cesar de Sa & Abel D. Santos (Eds.), NUMIFORM '07: Materials processing and design: modeling, simulation and applications. American Institute of Physics, pp. 655-660. ISBN 9780735404151

Bonte, M.H.A. and Boogaard, A.H. van den and Veldman, E. (2007) Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 3-8).

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2007) Numerical Forming Simulations and Optimisation in Advanced Materials. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 281-286).

Meinders, T. and Perdahcioglu, E.S. and Riel, M. van and Wisselink, H.H. (2007) Numerical modeling of advanced materials. International Journal of Machine Tools and Manufacture, 48 (5). pp. 485-498. ISSN 0890-6955

Meinders, T. and Burchitz, I.A. and Bonte, M.H.A. and Lingbeek, R.A. (2007) Numerical product design: Springback prediction, compensation and optimization. International Journal of Machine Tools and Manufacture, 48 (5). pp. 499-514. ISSN 0890-6955

Bonte, Martijn Hans Albert (2007) Optimisation strategies for metal forming processes. thesis.

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2007) Pre-yield tensile set of a semi-crystalline polymer, its blend and composite. Journal of Materials Science, 42 (12). pp. 4131-4135. ISSN 0022-2461

Snippe, Corijn H.C. and Meinders, T. (2007) Prediction of Gas Leak Tightness of Superplastically Formed Products. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM.

Burchitz, I. and Meinders, T. and Huetink, J. (2007) Simulation of springback: adaptive quadrature [poster]. In: NIMR Congress, December 10-11, 2007, Noordwijkerhout, The Netherlands.

Hadoush, A. and Boogaard, A.H. van den and Huetink, J. (2007) Stable incremental deformation of a strip to high strain. In: Sheet metal 2007, April 1st-4th 2007, Palermo, Italy (pp. pp. 615-620).

Emmens, W.C. and Boogaard, A.H. van den (2007) Strain in Shear, and Material Behaviour in Incremental Forming. In: Sheet Metal 2007, April 1-4, 2007, Palermo, Italy (pp. pp. 519-526).

Riel, M. van and Boogaard, A.H. van den (2007) Stress–strain responses for continuous orthogonal strain path changes with increasing sharpness. Scripta Materialia, 57 (5). pp. 381-384. ISSN 1359-6462

Bonte, M.H.A. and Boogaard, A.H. van den and Ravenswaaij, R. van (2007) The robust optimisation of metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 9-14).

Lingbeek, R.A. and Meinders, T. (2007) Towards Efficient Modelling Of Macro And Micro Tool Deformations In Sheet Metal Forming. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 723-727).

Meinders, T. and Burchitz, I. and Bonte, M.H.A. and Lingbeek, R.A. and Perdahcioglu, E.S. and Riel, M. van and Wisselink, H.H. (2007) Trends in Forming Simulation and Optimization of Sheet Metal Products. In: ASME Applied Mechanics and Materials Conference, McMat 2007, June 3-7, 2007, University of Texas, Austin.

2006

Bonte, M.H.A. and Do, T.T. and Fourment, L. and Boogaard, A.H. van den and Huetink, J. and Habbal, A. (2006) A comparison between optimisation algorithms for metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 883-886).

Vegter, H. and Boogaard, A.H. van den (2006) A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states. International Journal of Plasticity, 22 (3). pp. 557-580. ISSN 0749-6419

Meinders, T. and Konter, A.W.A. and Meijers, S.E. and Atzema, E.H. and Kappert, H. (2006) A sensitivity analysis on the springback behavior of the Unconstrained Bending Problem. International Journal of Forming Processes, 9 (3). pp. 365-402. ISSN 1292-7775

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Adaptive through-thickness integration for shell elements [poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Adaptive through-thickness integration for shells [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2006) An optimisation strategy for industrial metal forming processes: abstract WCCM 2006. In: 7th World Congress on Computational Mechanics, July 16 - 22, 2006, Los Angeles, California.

Perdahcioglu, E.S. (2006) Biaxial tests on Sandvik Nanoflex. [Report]

Vegter, H. and Horn, Carel H.L.J. ten and An, Y. and Atzema, E.H. and Pijlman, H.H. and Boogaard, A.H. van den and Huetink, J. (2006) Comportamento pl'astico do material: um dado importante para prever a estampagem de chapas. Corte & conformacao de metais, 12 . pp. 50-69. ISSN 1808-351X

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Constitutive Behaviour in Strain Path Sensitive Sheet Metal [em poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Banabic, D. and Huetink, J. (2006) Determination of the yield locus by means of temperature measurement. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K (pp. pp. 359-362).

Koopman, A.J. (2006) Eindrapportage Simalex december 2006. [Report]

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2006) Flow front tracking in aluminium extrusion dies by means of particle trajectories [Poster]. In: 9th Engineering Mechanics Symposium, October 26-27, 2006, Lunteren, the Netherlands.

Wisselink, H.H. (2006) Forming the limits of damage predictions: from fundamentals to application WP4. In: NIMR Congress, December, 11-12, 2006, Noordwijkerhout, The Netherlands.

Chen, Wei (2006) Hydration of slag cement: theory, modeling and application. thesis.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Influence of Stress state and Strain path on deformation induced martensitic transformations. In: ESOMAT 2006, 7th European Symposium on Martensitic Transformations and Shape Memory Alloys, September 10th to 15th, 2006, Bochum, Germany.

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Influence of numerical parameters on springback prediction in sheet metal forming. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 407-410).

Thije, R.H.W. ten and Akkerman, R. and Huetink, J. (2006) Large Deformation Simulation of Anisotropic Material. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Mechanical tests and constitutive modeling of metastable austenitic stainless steels [em poster]. In: EM symposium, November 21-22, 2005, Lunteren, The Netherlands.

Snippe, Corijn (2006) Mechanics of Forming Processes [literature report]: Vol. II. [Report]

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Non-proportional tension-shear experiments in a biaxial test facility. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 323-326).

Huetink, J. (2006) On Anisotropy, Objectivity and Invariancy in finite thermo–mechanical deformations. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K (pp. pp. 355-358).

Bonte, M.H.A. (2006) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2006) Optimisation of Forming Processes [poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Bonte, M.H.A. and Boogaard, A.H. van den and Carleer, B.D. (2006) Optimising towards robust metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 47-50).

Snippe, Corijn (2006) Particle physics [Literature report]: Vol. I. [Report]

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2006) Rigid particle toughening of aliphatic polyketone. Polymer, 47 (16). pp. 5880-5887. ISSN 0032-3861

Boogaard, A.H. van den and Huetink, J. (2006) Simulation of aluminium sheet forming at elevated temperatures. Computer Methods in Applied Mechanics and Engineering, 195 (48-49). pp. 6691-6709. ISSN 0045-7825

Kurukuri, S. and Boogaard, A.H. van den and Huetink, J. (2006) Simulation of thermo-mechanical aluminium sheet formming [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Lingbeek, R. and Meinders, T. and Ohnimus, S. and Petzoldt, M. and Weiher, J. (2006) Springback Compensation: Fundamental Topics and Practical Application. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K (pp. pp. 403-406).

Trichon, Sophie (2006) Stay at University of Twente, Faculty of Engineering Technology, Applied Mechanics Group. [Report]

Riel, M. van (2006) Strain path dependent material models for forming and crash: literature study for NIMR project MC1.03158. [Report]

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Strain path sensitivity in DC06 mild steel [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Snippe, C. (2006) Superplastic forming of subatomic particle detector foils [em poster]. In: EM symposium 2006, 2006.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Tailoring of metastable steels [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

2005

Meinders, T. and Konter, A.W.A. and Meijers, S.E. and Atzema, E.H. and Kappert, H. (2005) A Sensitivity Analysis On The Springback Behavior Of The Unconstrained Bending Problem. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Bonte, M.H.A. (2005) A comparison between optimisation algorithms for metal forming processes { With application to forging. [brace not closed] [Report]

Yu, Yuhong (2005) A displacement based FE formulation for steady state problems. thesis.

Snippe, C. (2005) Design and optimisation of vertex detector foils as a function of the deformation process, in particular superplastic forming [em poster]. In: NIMR 2005, 2005.

Boogaard, A.H. van den and Wisselink, H.H. and Huetink, J. (2005) Do Advanced Material Models Contribute to Accuracy in Industrial Sheet Forming Simulations? Advanced Materials Research, 6-8 . pp. 71-80. ISSN 1662-8985

Boogaard, A.H. van den and Riel, M. van and Huetink, J. (2005) Evaluation of stresses in a combined plane strain-simple shear test. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

Wisselink, H.H. and Boogaard, A.H. van den (2005) Finite Element Simulation of the Stretch-Forming of Aircraft Skins. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Wisselink, H.H. (2005) Forming the limits of damage predictions: from fundamentals to application WP4 [poster]. In: NIMR Congress, December, 12-13, 2005, Noordwijkerhout, The Netherlands.

Burchitz, Igor and Boesenkool, Roel and Zwaag, Sybrand van der and Tassoul, Marc (2005) Highlights of designing with Hylite - a new material concept. Materials & Design, 26 (4). pp. 271-279. ISSN 0264-1275

Burchitz, I. and Meinders, T. and Huetink, J. (2005) Improving numerical predictability of Springback [poster]. In: NIMR Congress, December 12-13, 2005, Noordwijkerhout, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2005) Improving numerical predictability of Springback [poster]. In: Eight Engineering Mechanics Symposium, EM, November 21-22, 2005, Lunteren, The Netherlands.

Avetisyan, M. and Meinders, T. and Huetink, J. (2005) Influence of an Accurate Trimming operation on Springback. International Journal of Forming Processes, 5 (specia). pp. 31-51. ISSN 1292-7775

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, J. and Gaymans, R.J. (2005) Influence of copolymerisation on fracture behaviour of aliphatic polyketones. Polymer, 46 (6). pp. 1921-1934. ISSN 0032-3861

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2005) Influence of sample thickness on fracture behaviour of a polyketone and a polyketone-rubber blend. Polymer, 46 (23). pp. 10321-10330. ISSN 0032-3861

Bonte, M.H.A. (2005) Internship at CEMEF. [Report]

Lingbeek, R.A. and Huetink, J. and Ohnimus, S. and Weiher, J. (2005) Iterative springback compensation of NUMISHEET benchmark #1. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Metamodelling techniques for the optimisation of metal forming processes. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

Boogaard, A.H. van den (2005) Modelling of localised necking in thermo-mechanical sheet metal forming. In: Euromech Colloquium 474: Material Instabilities in Coupled Problems, August 30-31, 2005, Troyes, France.

Bonte, M.H.A. (2005) Optimisation of Forming Processes [poster]. In: Eighth Engineering Mechanica Symposium, 21-22 November 2005, Lunteren, The Netherlands.

Amstel, T. van and Groen, M. and Post, J. and Huetink, J. (2005) Optimizing the Post Sandvik Nanoflex material model using inverse optimization and the finite element method. In: eighth ESAFORM conference on Material Forming, April 2005, Cluj-Napoca, Romania (pp. pp. 167-170).

Wijskamp, Sebastiaan (2005) Shape distortions in composites forming. thesis.

Bonte, M.H.A. (2005) Solving optimisation problems in metal forming using FEM: A metamodel based optimisation algorithm. [Report]

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Solving optimisation problems in metal forming using Finite Element simulation and metamodelling techniques. In: Apomat conference, 2005, Morschach, Switzerland.

Lingbeek, Roald (2005) Springback compensation for an analytical elasto-plastic stretch-bending model: Milestone Report M3. [Report]

Lingbeek, Roald (2005) Springback compensation of industrial parts with the displacement adjustment and springforward methods: Milestone 1. [Report]

Burchitz, I. (2005) Springback, improvement of its predictability: Literature study report. [Report]

Lingbeek, Roald (2005) The application of springback compensation to the CAD geometries of forming tools: Milestone 2. [Report]

Lingbeek, R. and Huetink, J. and Ohnimus, S. and Petzoldt, M. and Weiher, J. (2005) The development of a finite elements based springback compensation tool for sheet metal products. Journal of Materials Processing Technology, 169 (1). pp. 115-125. ISSN 0924-0136

Pulnikov, A. and Decocker, R. and Permiakov, V. and Dupre, L. and Vandevelde, L. and Petrov, R. and Melkebeek, J. and Houbaert, Y. and Gyselinck, J. and Wisselink, H. (2005) The relation between the magnetostriction and the hysteresis losses in the non-oriented electrical steels. Journal of Magnetism and Magnetic Materials, 290-29 (Part 2). pp. 1454-1456. ISSN 0304-8853

Nagy, Geza T. and Valkering, Kasper and Huetink, Han (2005) Wrinkling criteria in sheet metal forming for single sided contact situation and its application. In: COMPLAS VIII, VIII International Conference on Computational Plasticity, 2005, Barcelona, Spain.

2004

Wisselink, H.H. and Huetink, J. (2004) 3D FEM simulation of stationary metal forming processes with applications to slitting and rolling. Journal of Materials Processing Technology, 148 (3). pp. 328-341. ISSN 0924-0136

Post, J. and Klaseboer, G. and Stinstra, E. and Huetink, J. (2004) A DACE study on a three stage metal forming process made of Sandvik Nanoflex. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 475-480).

Post, J. and Datta, K. and Huetink, J. (2004) Constitutive behaviour of the metastable stainless steel: Sandvik Nanoflex. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 13-17 June, 2004, Columbus, Ohio (pp. pp. 1670-1675).

Voncken, R.M.J. and Sluis, O. van der and Post, J. and Huetink, J. (2004) FE calculations on a three stage metal forming process of Sandvik Nanoflex. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 469-474).

Wisselink, H.H. and Huetink, J. (2004) FEM simulation of multi step forming of thick sheet. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 899-904).

Burchitz, I. (2004) Forming processes and mechanics of sheet metal forming. [Report]

Bonte, M.H.A. (2004) Forming processes: an introduction, CTW.04/TM-5475. [Report]

Huetink, J. (2004) Implementation of Microstructural Material Phenomena in Macro Scale Simulations of Forming Processes. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Avetisyan, M. and Meinders, T. and Huetink, J. (2004) Improvement of Springback Predictability after forming and trimming operations. In: 7th ESAFORM conference on Material Forming, April 28-30, 2004, Trondheim, Norway.

Burchitz, I. and Meinders, T. and Huetink, J. (2004) Improving numerical predictability of Springback [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Pulnikov, A. and Permiakov, V. and Petrov, R. and Gyselinck, J. and Langelaan, G. and Wisselink, H. and Dupre, L. and Houbaert, Y. and Melkebeek, J. (2004) Investigation of residual stresses by means of local magnetic measurement. Journal of Magnetism and Magnetic Materials, 272-27 (3). pp. 2303-2304. ISSN 0304-8853

Kommelt, Pascal (2004) Literature study on hydroform technique. [Report]

Wisselink, H.H. (2004) Load transfer in bolt joints of coated parts [poster]. In: NIMR 2004, 2004.

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2004) Mechanical properties of polyketone terpolymer/rubber blends. Polymer, 45 . pp. 3765-3779. ISSN 0032-3861

Boogaard, A.H. van den and Huetink, J. (2004) Modelling of aluminium sheet forming at elevated temperatures. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Haaren, L. and Boogaard, A.H. van den and Huetink, J. (2004) Modelling of aluminium sheet material at elevated temperatures. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004, Trondheim, Norway.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2004) Modelling shape distortions in composite products. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004 , Trondheim, Norway.

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2004) Notch sensitivity of aliphatic polyketone terpolymers. Journal of Applied Polymer Science, 91 (4). pp. 2558-2575. ISSN 0021-8995

Avetisyan, Marianna (2004) Numerical Trimming Operation with Respect to Springback. [Report]

Post, Johannes (2004) On the constitutive behaviour of Sandvik Nanoflex: modelling, experiments and multi-stage forming. thesis.

Bonte, M.H.A. (2004) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2004) Optimisation of Forming Processes [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Bonte, Martijn H.A. (2004) Optimisation: An Introduction. [Report]

Bonte, M.H.A. and Boer, A. de and Liebregts, R. (2004) Prediction of mechanical fatigue caused by multiple random excitations. In: International Conference on Noise and Vibration Engineering, ISMA, 20-22 September 2004, Leuven, Belgium (pp. pp. 697-708).

Lamers, Edwin Adriaan Derk (2004) Shape distortions in fabric reinforced composite products due to processing induced fibre reorientation. thesis.

Geijselaers, H.J.M. and Huetink, J. (2004) Simulation of Steady Laser Hardening by an Arbitrary Lagrangian Eulerian Method. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Boogaard, A.H. van den and Kelder, M.H. (2004) Simulation of hydro-formability testing for tubes. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004, Trondheim, Norway.

Haaren, L. van (2004) Simulation of thermo-mechanical aluminium sheet forming [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Haaren, L. van (2004) Simulation of thermo-mechanical aluminium sheet forming [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2004) Springback in metal forming. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Avetisyan, M. and Meinders, T. and Huetink, J. (2004) Springback: Influence of an Accurate Trimming on Springback [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2004) Tailoring of Metastable Steels [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Geijselaers, H.J.M. and Huetink, H. (2004) Thermo-Mechanical Analysis with Phase Transformations. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 1508-1513).

2003

Wisselink, H.H. and Huetink, J. (2003) 3D FEM Simulation of shape rolling using an ALE method. In: VII International Conference on Computational Plasticity, COMPLAS 2003, April 7-10, 2003, Barcelona, Spain.

Boogaard, A.H. van den and Bolt, P.J. (2003) A material model for warm forming of aluminium sheet. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Geijselaers, H.J.M. and Huetink, J. (2003) A second order discontinuous Galerkin method for advection on unstructured triangular meshes keywords: advection convection discontinuous galerkin finite elements. Communications in Numerical Methods in Engineering, 19 (4). pp. 275-284. ISSN 1069-8299

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Adaptive numerical analysis of wrinkling in sheet metal forming. International journal of forming processes, 6 (1). pp. 87-102. ISSN 1292-7775

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Advanced sheet metal forming. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Vegter, H. and Horn, Carel H.L.J. ten and An, Yuguo and Atzema, Eisso H. and Pijlman, Hermen H. and Boogaard, Ton H. van den and Huetink, Han (2003) Characterisation and modelling of the plastic material behaviour and its application in sheet metal forming simulation. In: COMPLAS VII, 7th International Conference on Computational Plasticity, April 7-10, 2003, Barcelona, Spain.

Datta, K. and Hommes, M. and Post, J. and Geijselaers, H.J.M. and Huetink, H. and Beyer, J. (2003) Constitutive modelling of Sandvik 1RK91. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Avetisyan, M. and Burchitz, I.A. (2003) Current status of the Springback project [poster]. In: NIMR Congress, December 8-9, 2003, Noordwijkerhout, The Netherlands.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2003) Drape Modelling of Multi-Layered Composites. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Boogaard, A.H. van den and Meinders, T. and Huetink, J. (2003) Efficient implicit FEM simulation of sheet metal forming. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Boogaard, A.H. van den and Meinders, T. and Huetink, J. (2003) Efficient implicit finite element analysis of sheet forming processes. International Journal for Numerical Methods in Engineering, 56 (8). pp. 1083-1107. ISSN 0029-5981

Dijkstra, P.T.S. and Gaymans, R.J. and Dijk, D.J. van and Huetink, J. (2003) Elasticity at Large Deformations and High Strain Rates in Injection Molded Polypropylene. Polymer Engineering and Science, 43 (9). pp. 1613-1623. ISSN 0032-3888

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2003) Fibre Orientation Modelling for Rubber Press Forming of Thermoplastic Laminates. International Journal of Forming Processes, 6 (3-4). pp. 443-463. ISSN 1292-7775

Datta, K. and Akagi, H. and Geijselaers, H.J.M. and Huetink, J. (2003) Finite Element Modelling of Bends and Creases during Folding Ultra Thin Stainless Steel Foils. In: ABAQUS Users' Conference 2003, November 24-25, 2003, Vienna.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Improvement of implicit finite element code performance in deep drawing simulations by dynamics contributions. Journal of Materials Processing Technology, 134 (3). pp. 413-420. ISSN 0924-0136

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, H.J. and Gaymans, R.J. (2003) Influence of molecular weight on the fracture properties of aliphatic polyketone terpolymers. Polymer, 44 (20). pp. 6361-6370. ISSN 0032-3861

Haaren, L. and Miroux, A. (2003) Modelling stretch-forming with intermediate annealing steps [poster]. In: NIMR 2003, 2003.

Geijselaers, H.J.M. (2003) Numerical Simulation of Stresses due to Solid State Transformations : The Simulation of Laser Hardening. thesis.

Bonte, M.H.A. (2003) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 8-9, 2003, Noordwijkerhout, The Netherlands.

Boogaard, A.H. van den and Huetink, J. (2003) Prediction of sheet necking with shell finite element models. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Wijskamp, S. and Akkerman, R. and Lamers, E.A.D. (2003) Residual stresses in non-symmetrical carbon/epoxy laminates. In: ICCM 14, International conference on composites: Bridging the Gap Between Academia and Industry,, July 14-18, 2003, San Diego, California.

Wijskamp, S. and Lamers, E.A.D. and Akkerman, R. (2003) Residual stresses in rubber formed thermoplastic composites. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Zuiderduin, W.C.J. and Westzaan, C. and Huetink, J. and Gaymans, R.J. (2003) Toughening of polypropylene with calcium carbonate particles. Polymer, 44 (1). pp. 261-275. ISSN 0032-3861

Bolt, P.J. and Werkhoven, R.J. and Boogaard, A.H. van den (2003) Warm Deep Drawing of Aluminium Sheet. In: Shemet 2003, 2003.

Selman, A. and Atzema, E. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Wrinkling in sheet metal forming: experimental testing vs. numerical analysis. International journal of forming processes, 6 (2). pp. 147-160. ISSN 1292-7775

Meinders, Timo and Selman, Sid and Atzema, Eisso H. and Huetink, Han (2003) Wrinkling prediction in sheet metal forming and experimental verification. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

2002

Avetisyan, Marianna (2002) "Paint systems". [Report]

Wisselink, H.H. and Huetink, J. (2002) 3D FEM simulations of the rolling of stator vanes, including tool deformation. In: 7th International Conference on Technology of Plasticity, ICTP 2002, 27 Oct. - 1 Nov. 2002, Yokohama, Japan.

Dijkstra, P.T.S. and Dijk, D.J. van and Huetink, J. (2002) A microscopy study of the transition from yielding to crazing in polypropylene. Polymer Engineering and Science, 42 (1). pp. 152-160. ISSN 0032-3888

Boogaard, A.H. van den and Bolt, P.J. and Werkhoven, R.J. and Hout, M.H.F.M. van (2002) Aluminium sheet forming simulations: influence of the yield surface. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2002) An algorithm to make your implicit code competitive with an explicit code for large scale problems. In: NUMISHEET 2002, 2002.

Selman, A. and Meinders, T. and Huetink, J. and Boogaard, A.H. van den (2002) Comprehensive adaptive mesh refinement in wrinkling prediction analysis. In: International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2002, 21-25/10/2002, Science Town, Taejon, Korea.

Kloosterman, Gertjan (2002) Contact methods in finite element simulations. thesis.

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2002) Drape modelling of multilayer fabric reinforced thermoplastic laminates. In: Sixth International Conference on Textile Composites (TEXCOMP 6), September 11-13, 2002, Philadelphia, Pennsylvania, USA.

Wisselink, H.H. (2002) FEM Simulation of the forming of parts from thick sheet [poster]. In: 4th Congress of the Netherlands Institute for Metals Research, NIMR 2002, December 16-17, 2002, Noordwijkerhout, The Netherlands.

Lamers, E.A.D. and Akkerman, R. and Wijskamp, S. (2002) Fibre Orientation Modelling for Rubber Press Forming of Thermoplastic Laminates. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Datta, K. and Post, J.A. and Geijselaers, H.J.M. and Huetink, J. (2002) Finite element modelling of concurrent deformation and transformation in metastable steels. In: ABAQUS World Users Conference, 28-31 May, 2002, New Port, RI, USA.

Meinders, T. (2002) Numisheet 2002 Benchmark Test A: Cylindrical cup drawing. In: NUMISHEET 2002, 2002.

Meinders, T. (2002) Numisheet 2002 Benchmark Test B: Unconstrained bending. In: NUMISHEET 2002, 2002.

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2002) On adaptive mesh refinement in wrinkling prediction analysis. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Boogaard, A.H. van den (2002) Thermally Enhanced Forming of Aluminium Sheet. Modelling and experiments. thesis.

Wisselink, H.H. and Huetink, J. (2002) Tool deformation during the shape rolling of stator vanes. In: fifth ESAFORM conference on Material Forming, April 14-17, 2002, Krakow, Poland.

2001

Wisselink, H.H. and Huetink, J. and Dijk, M.H.H. van and Leeuwen, A.J. van (2001) 3D FEM Simulations of a shape rolling process. In: fourth ESAFORM conference on Material Forming, April 23-25, 2001, Liège, Belgium.

Selman, A. and Merrouche, A. and Knopf-Lenoir, C. (2001) 3D mesh refinement procedure using the bisection and rivara algorithms with mesh quality assessment. Revue Europeenne des Elements Finis, REEF . ISSN 1250-6559

Kloosterman, G. and Damme, R.M.J. van and Boogaard, A.H. van den and Huetink, J. (2001) A geometrical-based contact algorithm using a barrier method. International Journal for Numerical Methods in Engineering, 51 (7). pp. 865-882. ISSN 0029-5981

Boogaard, A.H. van den and Werkhoven, R.J. and Bolt, P.J. (2001) A material model for aluminium sheet forming at elevated temperatures. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Kloosterman, G. and Boogaard, A.H. van den and Huetink, J. (2001) A modified barrier approach to contact problems. In: 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan (pp. 97 - 102).

Lof, J. and Boogaard, A.H. van den (2001) Adaptive return mapping algorithms for J2 elasto-viscoplastic flow. International Journal for Numerical Methods in Engineering, 51 (11). pp. 1283-1298. ISSN 0029-5981

Boogaard, A.H. van den and Bolt, P.J. and Werkhoven, R.J. (2001) Aluminium sheet forming at elevated temperatures. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Geijselaers, H.J.M. and Huetink, J. (2001) Convection by means of least squares projection for ALE calculations. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Meinders, T. (2001) Dynamics contributions to the static implicit code dieka. [Report]

Bolt, P.J. and Werkhoven, R.J. and Boogaard, A.H. van den (2001) Effect of elevated temperatures on the drawability of aluminium sheet components. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Selman, A. (2001) Exit report modelling of sheet metal forming (Project ME97033). [Report]

Wisselink, H.H. (2001) FEM Simulation of the stretch-forming of aircraft skins [poster]. In: 3rd Congress of the Netherlands Institute for Metals Research, NIMR 2001, December 10-11, 2001, Noordwijkerhout, The Netherlands.

Boogaard, A. van den and Bolt, P. and Werkhoven, R. (2001) Modeling of AlMg Sheet Forming at Elevated Temperatures. International journal of forming processes, 4 (3-4). pp. 361-375. ISSN 1292-7775

Pijlman, Hermen Hendrik (2001) Sheet material characterisation by multi-axial experiments. thesis.

Geijselaers, H.J.M. and Yu, Yuhong and Huetink, J. (2001) Simulation of Steady State Laser Hardening. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Wisselink, H.H. (2001) Simulation of the stretch-forming process with the Finite Element Method. [Report]

Selman, A. (2001) Wrinkling prediction procedure in thin sheet metal forming processes with adaptive mesh refinement. Part 1: contact free wrinkling. [Report]

Selman, A. (2001) Wrinkling prediction procedure in thin sheet metal forming processes with adaptive mesh refinement. Part 2: wrinkling with contact. [Report]

2000

Wisselink, H.H. (2000) ALE simulations of 3D flow problems with moving free surfaces using DIEKA. [Report]

Wisselink, Hendrik Herman (2000) Analysis of guillotining and slitting, finite element simulations. thesis.

Boogaard, A.H. van den and Pijlman, H.H. and Huetink, J. (2000) Anisotropic yield functions in a co-rotating reference frame. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Langkruis, J. van de and Lof, J. and Kool, W.H. and Zwaag, S. van der and Huetink, J. (2000) Comparison of experimental AA6063 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model. Computational Materials Science, 18 (3-4). pp. 381-392. ISSN 0927-0256

Meinders, V.T. and Berg, A. van den and Huetink, J. (2000) Deep drawing simulations of tailored blanks and experimental verification. Journal of Materials Processing Technology, 103 (1). pp. 65-73. ISSN 0924-0136

Lof, Joeri (2000) Developments in finite element simulations of aluminium extrusion. thesis.

Meinders, Vincent Timo (2000) Developments in numerical simulations of the real-life deep drawing process. thesis.

Selman, A. and Huetink, J. and Boogaard, A.H. van den (2000) Error estimation for thin sheet metal forming processes. [Report]

Wisselink, Harm (2000) FEM Simulation of the rolling of stator vanes [poster]. In: Second Congress of the Netherlands Institute for Metals Research, NIMR 2000: “Building Bridges In Metallurgy”, 13-14 December 2000, Noordwijkerhout, The Netherlands.

Geijselaers, Hubert J. M. and Koning, Annette J. E. (2000) Finite Element Analysis of Thermoelastic Instability With Intermittent Contact. Journal of Tribology, 122 (1). pp. 42-46. ISSN 0742-4787

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2000) Improvements in FE-analysis of real-life sheet metal forming. In: European Congress on Computational Methods in Applied Science and Engineering, ECCOMAS 2000, 11-14 September 2000, Barcelona.

Valkering, Kasper (2000) Maintenance document Dieka PreProcessor for Extrusion. [Report]

Valkering, Kasper and Blokhuis, Y. (2000) Making simulations with PreProcessor ProE. [Report]

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2000) Modelling the distortions of skewed woven fabric reinforced composites. In: Fifth International Conference on Textile Composites (TEXCOMP 5), September 18-20, 2000, Katholieke Universiteit Leuven, Belgium.

Lamers, E.A.D. and Wijskamp, S. and Akkerman, R. (2000) Modelling the thermo-elastic properties of skewed woven fabric reinforced composites. In: 9th European Conference on Composite Materials, ECCM, June 4-7 2000, Brighton, UK.

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, V.T. (2000) Numerical and physical modelling in forming. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Geijselaers, H.J.M. and Huetink, J. (2000) Semi implicit second order discontinuous Galerkin convection for ALE calculations. In: ECCOMAS, European Congress on Computational Methods in Applied Sciences and Engineering, 11-14 September 2000, Barcelona, Spain.

Haaren, M.J. van and Stoker, H.C. and Boogaard, A.H. van den and Huetink, J. (2000) The ALE-method with triangular elements: direct convection of integration point values. International Journal for Numerical Methods in Engineering, 49 (5). pp. 697-720. ISSN 0029-5981

Valkering, Kasper (2000) User manual Dieka PreProcessor. [Report]

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2000) Wrinkling prediction with adaptive mesh refinement. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

1999

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (1999) A mixed elastoplastic / rigid plastic material model. In: Numisheet conference, 1999.

Huetink, J. and Boogaard, A.H. van den and Rietman, A.D. and Lof, J. and Meinders, T. (1999) A mixed elastoplastic/rigid-plastic material model. International Journal for Numerical Methods in Engineering, 46 (9). pp. 1421-1434. ISSN 0029-5981

Mooi, H.G. and Koenis, P.T.G. and Huetink, J. (1999) An effective split of flow and die deformation calculations of aluminium extrusion. Journal of Materials Processing Technology, 88 (1-3). pp. 67-76. ISSN 0924-0136

Meinders, T. and Berg, A. van den and Huetink, J. (1999) Deep drawing simulations of tailored blanks and experimental verification. International Sheet Metal Review . pp. 80-83. ISSN 1471-6542

Stoker, Hans Christiaan (1999) Developments of the arbitrary lagrangian-eulerian method in non-linear solid mechanics applications to forming processes. thesis.

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1999) Equivalent drawbead performance in deep drawing simulations. In: Numisheet conference, 1999.

Wisselink, H.H. and Huetink, J. (1999) Finite element model of the guillotining process. In: second ESAFORM conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

Wisselink, Harm (1999) Simulaties van knippen en slitten [poster]. In: Unknown, 1999, Papendal.

Wisselink, H.H. and Huetink, J. (1999) Simulation of the slitting process with the finite element method. In: International Conference on Sheet Metal, SheMet, 27-28 September 1999, Friedrich-Alexander-University Erlangen-Nuremberg (pp. pp. 143-152).

Haaren, M.J. van and Boogaard, A.H. van den and Stoker, H.C. and Huetink, J. (1999) The arbitrary Lagrangian-Eulerian method on grids of triangular elements: a new convection scheme. In: Second ESAFORM Conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

1998

Wisselink, H.H. and Huetink, J. (1998) 3-D modelling of sheet metal shearing. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Huetink, J. and Boogaard, A.H. van den and Rietman, A.D. and Lof, J. and Meinders, T. (1998) A mixed elastoplastic / rigid-plastic material model. In: Fourth World Congress on Computational Mechanics, WCCM IV, 29 June - 2 July 1998, Buenos Aires, Argentina.

Meinders, T. (1998) Bepalen van de Gauss integratiepunten over de hoogte. [Report]

Moesdijk, R.D. van de and Wisselink, H.H. and Boogaard, A.H. van den and Huetink, J. and Bolt, P.J. and Sillekens, W.H. (1998) Blanking by means of the finite element method. In: IACM Conference, 1998.

Berg, A. van den and Meinders, V.T. and Stokman, B. (1998) Deep drawing simulation of Tailored Blanks. In: 20th Biennial congress, IDDRG (International Deep Drawing Research Group), June 17-19, 1998, Brussels, Belgium (pp. pp. 133-144).

Meinders, V.T. and Berg, A. van den and Huetink, J. (1998) Deep drawing simulations of Tailored Blanks and experimental verification. In: Sheet Metal 1998. , Enschede, pp. 235-246. ISBN 9789036511131

Wisselink, Harm (1998) FE analysis of sheet metal cutting : poster. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1998) Implementation of plastic thickness strain in an equivalent drawbead model based on a penalty constrained model. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Boogaard, A.H. van den and Rietman, A.D. and Huetink, J. (1998) Iterative solvers in forming process simulations. In: 6th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede, the Netherlands.

Lof, J. and Huetink, J. (1998) Numerical Modeling of Aluminium Extrusion. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Boogaard, A.H. van den and Vliet, N. van and Huetink, J. (1998) Object oriented design of a thermo-mechanical FEM code. In: World Conference on Computational Mechanics , 1998.

Wisselink, H.H. and Huetink, J. (1998) Simulation of stationary sheet metal cutting processes. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Meinders, T. and Carleer, B.D. and Huetink, J. (1998) Simulation of the deep drawing process: a hierarchical method. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Meinders, T. and Carleer, B.D. and Geijselaers, H.J.M. and Huetink, J. (1998) The implementation of an equivalent drawbead model in a finite-element code for sheet metal forming. Journal of Materials Processing Technology, 83 (1-3). pp. 234-244. ISSN 0924-0136

Pijlman, Hermen H. and Huetink, J. and Meinders, T. and Carleer, B.D. and Vegter, H. (1998) The implementation of the vegter yield criterion and a physically based hardening rule in finite elements. In: Conference of the International Association of Computational Mechanics, IACM, June-July 1998, Buenos Aires, Argentina.

1997

Carleer, B.D. and Meinders, T. and Pijlman, H.H. and Huetink, J. and Vegter, H. (1997) A Planar Anisotropic Yield Function Based on Multi Axial Stress States in Finite Elements. In: COMPLAS V, 5th International Conference on Computational Plasticity, March 17-20, 1997, Barcelona, Spain.

Meinders, T. (1997) Adaptation of the equivalent drawbead model for elastic plas. [Report]

Carleer, B.D. (1997) Finite element analysis of deep drawing. thesis.

Meinders, T. and Carleer, B.D. and Vegter, H. and Huetink, J. (1997) Recent developments in finite element simulations of the deep drawing process. In: Sheet Metal 1997, 8 - 10 April 1997, Ulster, United Kingdom.

1996

Berg, Peter van den and Borst, Rene de and Huetink, Han (1996) An Eulerean finite element model for penetration in layered soil. International Journal for Numerical and Analytical Methods in Geomechanics, 20 (12). pp. 865-886. ISSN 0363-9061

Carleer, B.D. and Huetink, J. (1996) Closing the Gap between the Workshop and Numerical Simulations in Sheet Metal Forming. In: ECCOMAS Conference on Numerical Methods in Engineering ; 2 (Paris, France), 9-13 September 1996, Paris (pp. pp. 554-560).

Meinders, T. (1996) Equivalent drawbead model. [Report]

Carleer, Bart D. and Meinders, Timo and Huetink, Han (1996) Equivalent drawbead model in finite element simulations. In: NUMISHEET '96, Third International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes, September 29 - October 3, 1996, Dearborn, Michigan (pp. pp. 25-32).

1995

Vreede, P.T. and Carleer, B.D. and Louwes, M.F.M. and Huetink, J. (1995) Finite-element simulation of sheet-forming processes with the help of contact elements on small-scale workstations. Journal of Materials Processing Technology, 50 (1-4). pp. 264-276. ISSN 0924-0136

1994

Carleer, B.D. and Vreede, P.T. and Louwes, M.F.M. and Huetink, J. (1994) Modelling drawbeads with finite elements and verification. Journal of Materials Processing Technology, 45 (1-4). pp. 63-68. ISSN 0924-0136

1991

Geijselaers, H.J.M. and Tijdeman, H. (1991) The dynamic mechanical characteristics of a resonating microbridge mass-flow sensor. Sensors and actuators A: Physical, 29 (1). pp. 37-41. ISSN 0924-4247

1990

Huetink, J. and Vreede, P.T. and Lugt, J. van der (1990) Progress in mixed Eulerian-Lagrangian finite element simulation of forming processes. International Journal for Numerical Methods in Engineering, 30 (8). pp. 1441-1457. ISSN 0029-5981

1986

Huetink, J. (1986) On the simulation of thermo-mechanical forming processes. thesis.

Lugt, J. van der and Huetink, J. (1986) Thermal mechanically coupled finite element analysis in metal-forming processes. Computer Methods in Applied Mechanics and Engineering, 54 (2). pp. 145-160. ISSN 0045-7825

1985

Huisman, H.J. and Huetink, J. (1985) A combined eulerian-lagrangian three-dimensional finite-element analysis of edge-rolling. Journal of mechanical working technology, 11 (3). pp. 333-353. ISSN 0378-3804

This list was generated on Wed Apr 26 06:50:07 2017 CEST.