Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2009 | 2007 | 2003 | 2002 | 1999 | 1998
Number of items: 11.

2009

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) A comparative study of two conductive inkjet inks for fabrication of RF circuit structures. In: Large-area, Organic & Printed Electronics Convention, LOPE-C 2009, June 23-25, 2009, Frankfurt, Germany.

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) Inkjet printing and adhesion characterisation of conductive tracks on a commercial printed circuit board material. Thin Solid Films, 517 (16). pp. 4633-4637. ISSN 0040-6090

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2009) Surface Modification of a PCB Substrate for Better Adhesion of Inkjet Printed Circuit Structures. In: 3rd International Student Conference on Print and Media Technology, Printing Future Days 2009, November 2-5, 2009, Chemnitz, Germany (pp. pp. 363-368).

Sridhar, A. and Perik, M.A. and Reiding, J. and Dijk, D.J. van and Akkerman, R. (2009) Fabrication of RF Circuit Structures on a PCB Material Using Inkjet Printing-Electroless Plating and the Substrate Preparation Therefor. Transactions of The Japan Institute of Electronics Packaging, 2 (1). pp. 116-124. ISSN 1883-3365

Sridhar, A. and Reiding, J. and Adelaar, H. and Achterhoek, F. and Dijk, D.J. van and Akkerman, R. (2009) Inkjet-printing- and electroless-plating- based fabrication of RF circuit structures on high-frequency substrates. Journal of Micromechanics and Microengineering, 19 (8). 085020. ISSN 0960-1317

2007

Sridhar, A. and Dijk, D.J. van and Akkerman, R. (2007) Adhesion Characterisation of Inkjet Printed Silver Tracks. In: 2nd International Student Conference on Print and Media Technology, Printing Future Days 2007, November 5-8, 2007, Chemnitz, Germany (pp. pp. 209-210).

2003

Dijkstra, P.T.S. and Gaymans, R.J. and Dijk, D.J. van and Huetink, J. (2003) Elasticity at Large Deformations and High Strain Rates in Injection Molded Polypropylene. Polymer Engineering and Science, 43 (9). pp. 1613-1623. ISSN 0032-3888

2002

Dijkstra, P.T.S. and Dijk, D.J. van and Huetink, J. (2002) A microscopy study of the transition from yielding to crazing in polypropylene. Polymer Engineering and Science, 42 (1). pp. 152-160. ISSN 0032-3888

1999

Jansen, K.M.B. and Orij, J.J.W. and Dijk, D.J. van and Meijer, C.Z. (1999) Comparison of residual stress predictions and measurements using excimer laser layer removal. Polymer Engineering and Science, 39 (10). pp. 2030-2041. ISSN 0032-3888

1998

Jansen, K.M.B. and Dijk, D.J. van and Freriksen, M.J.A. (1998) Shrinkage anisotropy in fiber reinforced injection molded products. Polymer Composites, 19 (4). pp. 325-334. ISSN 0272-8397

Jansen, K.M.B. and Dijk, D.J. van and Husselman, M.H. (1998) Effect of processing conditions on shrinkage in injection molding. Polymer Engineering and Science, 38 (5). pp. 838-846. ISSN 0032-3888

This list was generated on Sat Aug 30 05:14:40 2014 CEST.