Author Publications

Article

Haanappel, S.P. and Sachs, U. and Thije ten, R.H.W. and Rietman, A.D. and Akkerman, R. (2012) Forming of Thermoplastic Composites. Key engineering materials, 504-506 . 237 - 242. ISSN 1013-9826

Lomov, S.V. and Barburski, M. and Stoilova, Tz. and Verpoest, I. and Akkerman, R. and Loendersloot, R. and Thije ten, R.H.W. (2005) Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preforms. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1188-1206. ISSN 1359-835X

Rietman, A.D. and Haanappel, S.P. and Thije ten, R.H.W. and Akkerman, R. (2012) Forming simulation sensitivity study of the double-dome benchmark geometry. Key engineering materials, 504-506 . 301 - 306. ISSN 1013-9826

Thije ten, R.H.W. and Akkerman, R. (2010) Finite element simulations of laminated composites forming processes. International Journal of Material Forming, 3 (Suppl.). pp. 715-718. ISSN 1960-6206

Thije ten, R.H.W. and Akkerman, R. (2009) Design of an experimental setup to measure tool-ply and ply-ply friction in thermoplastic laminates. International Journal of Material Forming, 2 (Suppl.). pp. 197-200. ISSN 1960-6206

Thije ten, R.H.W. and Akkerman, R. (2009) A multi-layer triangular membrane finite element for the forming simulation of laminated composites. Composites Part A: Applied Science and Manufacturing, 40 (6-7). pp. 739-753. ISSN 1359-835X

Thije ten, R.H.W. and Akkerman, R. (2008) Solutions to intra-ply shear locking in finite element analyses of fibre reinforced materials. Composites Part A: Applied Science and Manufacturing, 39 (7). pp. 1167-1176. ISSN 1359-835X

Thije ten, R.H.W. and Akkerman, R. and Huetink, J. (2007) Large deformation simulation of anisotropic material using an updated Lagrangian finite element method. Computer Methods in Applied Mechanics and Engineering, 196 (33-34). pp. 3141-3150. ISSN 0045-7825

Thije ten, R.H.W. and Akkerman, R. and Meer van der, L. and Ubbink, M.P. (2008) Tool-ply friction in thermoplastic composite forming. International Journal of Material Forming, 1 (Suppl.). pp. 953-956. ISSN 1960-6206

Conference or Workshop Item

Akkerman, R. and Thije ten, R. and Sachs, U. and Rooij de, M.B. (2010) Friction in Textile Thermoplastic Composites Forming. In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France.

Akkerman, Remko and Thije ten, René (2009) Models for Textile Composites Forming. In: NATO Advanced Research Workshop: Textile Composites, May 18-22, 2009, Kiev, Ukraine.

Haanappel, S.P. and Thije ten, R. and Akkerman, R. (2010) Forming predictions of UD reinforced thermoplastic laminates. In: 14th European Conference on Composite Materials, ECCM 2010, 7-10 June, 2010, Budapest, Hungary.

Haanappel, S.P. and Thije ten, R. and Akkerman, R. (2010) Constitutive modelling of UD reinforced thermoplastic laminates. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Haanappel, S.P. and Thije ten, R. and Sachs, U. and Rietman, A.D. and Akkerman, R. (2011) In-Plane Shear Characterisation of Uni-Directionally Reinforced Thermoplastic Melts. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Haanappel, S.P. and Sachs, U. and Thije ten, R.H.W. and Rietman, A.D. and Akkerman, R. (2012) Shear Characterisation of UD Thermoplastic Composites. In: 11th International Conference on Flow Processing in Composite Materials (FPCM-11), Auckland, New Zealand.

Harrison, P. and Thije ten, René and Akkerman, Remko and Long, Andrew C. (2009) Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. In: NATO Advanced Research Workshop: Textile Composites, May 18-22, 2009, Kiev, Ukraine.

Ilin, K. and Warnet, L. and Rietman, A.D. and Akkerman, R. and Thije ten, R.H.W. (2012) Failure Modeling of Thermoplastic Butt-Joint Stiffened Panels by Quasi-Static Loading. In: SIMULIA Community Conference, SCC, 15-17 May 2012, Providence RI, USA.

Loendersloot, R. and Thije ten, R.H.W. and Akkerman, R. and Lomov, S.V. (2003) Permeability Prediction of Non-Crimp Fabrics Based on a Geometric Model. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Loendersloot, R. and Thije ten, R.H.W. and Akkerman, R. and Lomov, S.V. (2004) Permeability prediction of non-crimp fabrics based on a geometric model. In: 11th European conference on composite materials, May 31 - June 3, 2004, Rhodes, Greece.

Sachs, U. and Akkerman, R. and Thije ten, R. and Rooij de, M. (2011) Friction in Forming of UD Composites. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

Thije ten, R.H.W. and Akkerman, R. (2005) Finite element simulation of draping with non-crimp fabrics. In: Fifteenth International Conference on Composite Materials, ICCM-15, 27 June-1 July 2005, Durban, South-Africa.

Thije ten, R.H.W. and Akkerman, R. (2007) Intra-ply shear locking. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain.

Thije ten, R.H.W. and Akkerman, R. and Huetink, J. (2006) Large Deformation Simulation of Anisotropic Material. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK.

Thije ten, R.H.W. and Akkerman, R. and Loendersloot, R. (2005) Drape simulation of non-crimp fabrics. In: 8th ESAFORM Conference on Material Forming 2005, April 27-29, 2005, Cluj-Napoca, Romania.

Thije ten, René and Haanappel, Sebastiaan (2011) Multi-layer thermoplastic composites manufacturing processes: simulations and experiments. In: SAMPE Europe International Conference & Forum, SEICO 2011, 28-30 March 2011, Paris, France.

Wolthuizen, D.J. and Thije ten, R.H.W. and Akkerman, R. (2013) Intra-Ply Shear Locking in Finite Element Simulations. In: 11th SAMPE Benelux student meeting, 14-15 January 2012, Namur, Belgium.

Thesis

Thije ten, René Hermanus Willem (2007) Finite element simulations of laminated composite forming processes. thesis.