Author Publications

2010

Husken, Debby and Visser, Tymen and Wessling, Matthias and Gaymans, Reinoud J. (2010) CO2 permeation properties of poly(ethylene oxide)-based segmented block copolymers. Journal of Membrane Science, 346 (1). pp. 194-201. ISSN 0376-7388

Reijerkerk, Sander R. and Arun, Araichimani and Gaymans, Reinoud J. and Nijmeijer, Kitty and Wessling, Matthias (2010) Tuning of mass transport properties of multi-block copolymers for CO2 capture applications. Journal of Membrane Science, 359 (1-2). pp. 54-63. ISSN 0376-7388

2009

Arun, Araichimani and Baack, Kasper K.J. and Gaymans, Reinoud J. (2009) Polyurethane tri-block copolymers - Synthesis, mechanical, elastic, and rheological properties. Polymer Engineering and Science, 50 (4). pp. 747-755. ISSN 0032-3888

Arun, Araichimani and Dullaert, Konraad and Gaymans, Reinoud J. (2009) The melt rheological behavior of AB, ABA, BAB, and (AB)n block copolymers with monodisperse aramide segments. Polymer Engineering and Science, 50 (4). pp. 756-761. ISSN 0032-3888

Arun, Araichimani and Gaymans, R.J. (2009) Hydrophilic poly(ethylene oxide)–aramide segmented block copolymers. European Polymer Journal, 45 (10). pp. 2858-2866. ISSN 0014-3057

Arun, Araichimani and Gaymans, Reinoud J. (2009) Melt rheological behavior of a triblock copolymer based on aramide end-segments. Journal of Applied Polymer Science, 112 (5). pp. 1663-2668. ISSN 0021-8995

Biemond, G.J.E. and Feijen, Jan and Gaymans, Reinoud J. (2009) Segmented Block Copolymers with Monodisperse Hard Segments: The Influence of H-Bonding on Various Properties. Macromolecular Materials and Engineering, 294 (8). pp. 492-501. ISSN 1438-7492

De, Debasish and Gaymans, Reinoud J. (2009) Thermoplastic Polyurethanes with TDI-Based Monodisperse Hard Segments. Macromolecular Materials and Engineering, 294 (6-7). pp. 405-413. ISSN 1438-7492

Husken, D. and Feijen, J. and Gaymans, R.J. (2009) Surface properties of poly(ethylene oxide)-based segmented block copolymers with monodisperse hard segments. Journal of Applied Polymer Science, 114 (2). pp. 1264-1269. ISSN 0021-8995

Husken, D. and Gaymans, R.J. (2009) Water vapor transmission of poly(ethylene oxide)-based segmented block copolymers. Journal of Applied Polymer Science, 112 (4). pp. 2143-2150. ISSN 0021-8995

Stephen, Ranimol and Gibon, Cécile M. and Weber, Martin and Gaymans, Reinoud J. (2009) Synthesis and properties of poly(sulfone-arylate) copolymers. Journal of Polymer Science, Part A: Polymer chemistry, 47 (15). pp. 3904-3913. ISSN 0887-624X

2008

Arun, A. and Gaymans, R.J. (2008) Tri-block copolymers with mono-disperse crystallizable diamide segments: Synthesis, analysis and rheological properties. Polymer, 49 (10). pp. 2461-2470. ISSN 0032-3861

Arun, Araichimani and Baack, Kasper K.J. and Gaymans, Reinoud J. (2008) Polyurethane triblock copolymers with mono-disperse hard segments. Influence of the hard segment length on thermal and thermomechanical properties. Polymer Engineering and Science, 48 (6). pp. 1222-1230. ISSN 0032-3888

Arun, Araichimani and Dullaert, Konraad and Gaymans, Reinoud J. (2008) Structure and Properties of Mono-, Di-, Tri- and Multiblock Segmented Copolymers with Diamide Hard Segments. Macromolecular Chemistry and Physics, 210 (1). pp. 48-59. ISSN 1022-1352

Arun, Araichimani and Gaymans, Reinoud J. (2008) Segmented Block Copolymers with Monodisperse Aramide End-Segments. Macromolecular Chemistry and Physics, 209 (8). pp. 854-863. ISSN 1022-1352

Arun, Araichimani and Gaymans, Reinoud J. (2008) Tensile and elastic properties of triblock copolymer based on aramide end-segments and polyether mid-segments. Journal of Applied Polymer Science, 111 (4). pp. 1780-1785. ISSN 0021-8995

Biemond, G.J.E. and Braspenning, K. and Gaymans, R.J. (2008) Polyurethanes with monodisperse rigid segments based on a diamine-diamide chain extender. Journal of Applied Polymer Science, 107 (4). pp. 2180-2189. ISSN 0021-8995

Biemond, G.J.E. and Feijen, J. and Gaymans, R.J. (2008) Tensile properties of segmented block copolymers with monodisperse hard segments. Journal of materials science, 43 (10). pp. 3689-3696. ISSN 0022-2461

Biemond, G.J.E. and Feijen, J. and Gaymans, R.J. (2008) Influence of polydispersity of crystallizable segments on the properties of segmented block copolymers. Polymer Engineering and Science, 48 (7). pp. 1389-1400. ISSN 0032-3888

De, Debasish and Gaymans, Reinoud J. (2008) Thermoplastic Polyurethanes with Poly(butylene terephthalate) as Crystallizable Hard Phase. Macromolecular Materials and Engineering, 293 (3). pp. 228-234. ISSN 1438-7492

De, Debasish and Gaymans, Reinoud J. (2008) Polyurethanes with Narrow- and Polydisperse Hard Segment Distributions. Macromolecular Materials and Engineering, 293 (11). pp. 887-894. ISSN 1438-7492

Husken, Debby and Feijen, Jan and Gaymans, Reinoud J. (2008) Synthesis and properties of segmented block copolymers based on mixtures of poly(ethylene oxide) and poly(tetramethylene oxide) segments. European Polymer Journal, 44 (1). pp. 130-143. ISSN 0014-3057

Husken, Debby and Feijen, Jan and Gaymans, Reinoud J. (2008) Segmented Block Copolymers with Terephthalic-Extended Poly(ethylene oxide) Segments. Macromolecular Chemistry and Physics, 209 (5). pp. 525-534. ISSN 1022-1352

Husken, Debby and Gaymans, Reinoud J. (2008) The Structure of Water in PEO-Based Segmented Block Copolymers and its Effect on Transition Temperatures. Macromolecular Chemistry and Physics, 209 (9). pp. 967-979. ISSN 1022-1352

Zuiderduin, W.C.J. and Gaymans, R.J. (2008) Polycarbonate modified with crystallisable bis-ester tetra-amide units in a reaction extrusion process. Reactive & Functional Polymers, 68 (2). pp. 527-534. ISSN 1381-5148

2007

Arun, Araichimani and Baack, Kasper K.J. and Gaymans, Reinoud J. (2007) Polyurethane triblock copolymers based on monodispersed amide segment R synthesis, mechanical, elastic and rheological properties. Polymer Preprints, 48 (1). pp. 483-484. ISSN 0032-3934

Arun, Araichimani and Gaymans, Reinoud J. (2007) Triblock copolymer based on monodisperse aramide segments-synthesis, mechanical and rheological properties. Polymer Preprints, 48 (1). pp. 856-857. ISSN 0032-3934

Biemond, G.J.E. and Feijen, J. and Gaymans, R.J. (2007) Poly(ether amide) segmented block copolymers with adipic acid based tetraamide segments. Journal of Applied Polymer Science, 105 (2). pp. 951-963. ISSN 0021-8995

De, Debasish and Gaymans, Reinoud J. (2007) Polyurethanes with a diamine-diamide chain extender. Polymer Preprints, 48 (1). pp. 485-486. ISSN 0032-3934

Gaymans, Reinoud J. and Schuur van der, Martijn (2007) Influence of liquid-liquid demixed vs crystalline morphology on the properties of segmented block copolymers. Polymer Preprints, 48 . pp. 829-830. ISSN 0032-3934

Husken, Debby and Feijen, Jan and Gaymans, Reinoud J. (2007) Hydrophilic segmented block copolymers based on poly(ethylene oxide) and monodisperse amide segments. Journal of Polymer Science, Part A: Polymer chemistry, 45 (19). pp. 4522-4535. ISSN 0887-624X

Krijgsman, J. and Biemond, G.J.E. and Gaymans, R.J. (2007) Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide) by direct coupling. Journal of Applied Polymer Science, 103 (1). pp. 512-518. ISSN 0021-8995

Krijgsman, J. and Biemond, G.J.E. and Stephen, R. and Gaymans, R.J. (2007) High Tg segmented copolymers with Monodisperse Crystallizable segments. Polymer Preprints, 48 (1). pp. 418-419. ISSN 0032-3934

Schuur van der, Martijn J. and Gaymans, Reinoud J. (2007) Influence of morphology on the properties of segmented block copolymers. Polymer, 48 (7). pp. 1998-2006. ISSN 0032-3861

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2007) Pre-yield tensile set of a semi-crystalline polymer, its blend and composite. Journal of Materials Science, 42 (12). pp. 4131-4135. ISSN 0022-2461

2006

Schuur van der, Martijn and Noordover, Bart and Gaymans, Reinoud J. (2006) Polyurethane elastomers with amide chain extenders of uniform length. Polymer, 47 (4). pp. 1091-1100. ISSN 0032-3861

Schuur van der, Martijn and Gaymans, Reinoud J. (2006) Segmented block copolymers based on poly(propylene oxide) and monodisperse polyamide-6,T segments. Journal of Polymer Science, Part A: Polymer chemistry, 44 (16). pp. 4769-4781. ISSN 0887-624X

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2006) Rigid particle toughening of aliphatic polyketone. Polymer, 47 (16). pp. 5880-5887. ISSN 0032-3861

2005

Krijgsman, J. and Biemond, G.J.E. and Gaymans, R.J. (2005) Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide):4. Influence of the extender. Polymer, 46 (19). pp. 8250-8257. ISSN 0032-3861

Krijgsman, J. and Gaymans, R.J. (2005) Segmented copolymers of poly(phenylene ether) and polyester. Polymer, 46 (16). pp. 6122-6127. ISSN 0032-3861

Schuur van der, Martijn and Boer de, Jan and Gaymans, Reinoud J. (2005) Structure-property relations of poly(propylene oxide) block copolymers with monodisperse and polydisperse crystallisable segments. Polymer, 46 (22). pp. 9243-9256. ISSN 0032-3861

Schuur van der, Martijn and Feijen, Jan and Gaymans, Reinoud J. (2005) Synthesis and characterization of bisester-amide segments of uniform and random length. Polymer, 46 (13). pp. 4584-4595. ISSN 0032-3861

Schuur van der, Martijn and Feijen, Jan and Gaymans, Reinoud J. (2005) Synthesis of polyether-based block copolymers based on poly(propylene oxide) and terephthalates. Polymer, 46 (2). pp. 327-333. ISSN 0032-3861

Schuur van der, Martijn and Gaymans, Reinoud J. (2005) Influence of chemical crosslinks on the elastic behavior of segmented block copolymers. Polymer, 46 (18). pp. 6862-6868. ISSN 0032-3861

Schuur van der, Martijn and Heide van der, Evert and Feijen, Jan and Gaymans, Reinoud J. (2005) Structure–property relations of segmented block copolymers with liquid–liquid demixed morphologies. Polymer, 46 (11). pp. 3616-3627. ISSN 0032-3861

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, J. and Gaymans, R.J. (2005) Influence of copolymerisation on fracture behaviour of aliphatic polyketones. Polymer, 46 (6). pp. 1921-1934. ISSN 0032-3861

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2005) Influence of sample thickness on fracture behaviour of a polyketone and a polyketone-rubber blend. Polymer, 46 (23). pp. 10321-10330. ISSN 0032-3861

2004

Husken, D. and Krijgsman, J. and Gaymans, R.J. (2004) Segmented blockcopolymers with uniform amide segments. Polymer, 45 (14). pp. 4837-4843. ISSN 0032-3861

Krijgsman, J. and Feijen, J. and Gaymans, R.J. (2004) Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide): 1. Synthesis and thermal-mechanical properties. Polymer, 45 (14). pp. 4677-4684. ISSN 0032-3861

Krijgsman, J. and Feijen, J. and Gaymans, R.J. (2004) Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide): 2. Crystallisation behaviour. Polymer, 45 (14). pp. 4685-4691. ISSN 0032-3861

Krijgsman, J. and Feijen, J. and Gaymans, R.J. (2004) Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide):3. Influence of tetra-amide content. Polymer, 45 (25). pp. 8523-8530. ISSN 0032-3861

Krijgsman, J. and Gaymans, R.J. (2004) Tensile and elastic properties of thermoplastic elastomers based on PTMO and tetra-amide units. Polymer, 45 (2). pp. 437-446. ISSN 0032-3861

Sauer, Bryan B. and McLean, R. Scott and Gaymans, Reinoud J. and Niesten, Meike C.J.E. (2004) Crystalline morphologies in segmented copolymers with hard segments of uniform length. Journal of Polymer Science, Part B: Polymer physics, 42 (9). pp. 1783-1792. ISSN 0887-6266

Schuur van der, Martijn and Heide van der, Evert and Feijen, Jan and Gaymans, Reinoud J. (2004) Elastic behavior of flexible polyether(urethane–urea) foam materials. Polymer, 45 (8). pp. 2721-2727. ISSN 0032-3861

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2004) Notch sensitivity of aliphatic polyketone terpolymers. Journal of Applied Polymer Science, 91 (4). pp. 2558-2575. ISSN 0021-8995

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2004) Mechanical properties of polyketone terpolymer/rubber blends. Polymer, 45 . pp. 3765-3779. ISSN 0032-3861

2003

Dijkstra, P.T.S. and Gaymans, R.J. and Dijk van, D.J. and Huetink, J. (2003) Elasticity at Large Deformations and High Strain Rates in Injection Molded Polypropylene. Polymer Engineering and Science, 43 (9). pp. 1613-1623. ISSN 0032-3888

Krijgsman, Josien and Feijen, Jan and Gaymans, Reinoud J. (2003) Synthesis and properties of segmented copolymers of polyphenylene ether and tetra-amide units. Macromolecular Symposia, 199 (1). pp. 135-146. ISSN 1022-1360

Krijgsman, J. and Feijen, J. and Gaymans, R.J. (2003) Synthesis and characterisation of telechelic poly(2,6-dimethyl-1,4-phenylene ether) for copolymerisation. Polymer, 44 (23). pp. 7055-7065. ISSN 0032-3861

Krijgsman, J. and Gaymans, R.J. (2003) Copolymers of poly(2,6-dimethyl-1,4-phenylene ether) and ester units. Polymer, 44 (25). pp. 7589-7599. ISSN 0032-3861

Krijgsman, J. and Husken, D. and Gaymans, R.J. (2003) Synthesis and properties of thermoplastic elastomers based on PTMO and tetra-amide. Polymer, 44 (25). pp. 7573-7588. ISSN 0032-3861

Krijgsman, J. and Husken, D. and Gaymans, R.J. (2003) Synthesis and characterisation of uniform bisester tetra-amide segments. Polymer, 44 (23). pp. 7043-7053. ISSN 0032-3861

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, H.J. and Gaymans, R.J. (2003) Influence of molecular weight on the fracture properties of aliphatic polyketone terpolymers. Polymer, 44 (20). pp. 6361-6370. ISSN 0032-3861

Zuiderduin, W.C.J. and Westzaan, C. and Huetink, J. and Gaymans, R.J. (2003) Toughening of polypropylene with calcium carbonate particles. Polymer, 44 (1). pp. 261-275. ISSN 0032-3861

2002

Inberg, J.P.F. and Gaymans, R.J. (2002) Polycarbonate and co-continuous polycarbonate/ABS blends: influence of specimen thickness. Polymer, 43 (13). pp. 3767-3777. ISSN 0032-3861

Inberg, J.P.F. and Gaymans, R.J. (2002) Polycarbonate and co-continuous polycarbonate/ABS blends: influence of notch radius. Polymer, 43 (15). pp. 4197-4205. ISSN 0032-3861

Inberg, J.P.F. and Gaymans, R.J. (2002) Co-continuous polycarbonate/ABS blends. Polymer, 43 (8). pp. 2425-2434. ISSN 0032-3861

Inberg, J.P.F. and Takens, A. and Gaymans, R.J. (2002) Strain rate effects in polycarbonate and polycarbonate/ABS blends. Polymer, 43 (9). pp. 2795-2802. ISSN 0032-3861

2001

Bouma, Krista and Regelink, Marc and Gaymans, Reinoud J. (2001) Crystallization of poly(ethylene terephthalate) modified with codiols. Journal of Applied Polymer Science, 80 (14). pp. 2676-2682. ISSN 0021-8995

Bouma, Krista and Wester, Geertje A. and Gaymans, Reinoud J. (2001) Polyether-amide segmented copolymers based on ethylene terephthalamide units of uniform length. Journal of Applied Polymer Science, 80 (8). pp. 1173-1180. ISSN 0021-8995

Bouma, Krista and Gaymans, Reinoud J. (2001) Crystallization of poly(ethylene terephthalate) and poly (butylene terephthalate) modified by diamides. Polymer Engineering and Science, 41 (3). pp. 466-474. ISSN 0032-3888

Niesten, M.C.E.J. and Bosch, H. and Gaymans, R.J. (2001) Influence of extenders on thermal and elastic properties of segmented copolyetheresteraramides. Journal of Applied Polymer Science, 81 (7). pp. 1605-1613. ISSN 0021-8995

Niesten, M.C.E.J. and Brinke ten, J.W. and Gaymans, R.J. (2001) Segmented copolyetheresteraramids with extended poly(tetramethyleneoxide) segments. Polymer, 42 (4). pp. 1461-1469. ISSN 0032-3861

Niesten, M.C.E.J. and Gaymans, R.J. (2001) Comparison of properties of segmented copolyetheresteramides containing uniform aramid segments with commercial segmented copolymers. Journal of Applied Polymer Science, 81 (6). pp. 1372-1381. ISSN 0021-8995

Niesten, M.C.E.J. and Gaymans, R.J. (2001) Tensile and elastic properties of segmented copolyetheresteramides with uniform aramid units. Polymer, 42 (14). pp. 6199-6207. ISSN 0032-3861

Niesten, M.C.E.J. and Harkema, S. and Heide van der, E. and Gaymans, R.J. (2001) Structural changes of segmented copolyetheresteramides with uniform aramid units induced by melting and deformation. Polymer, 42 (3). pp. 1131-1142. ISSN 0032-3861

Niesten, M.C.E.J. and Krijgsman, J. and Gaymans, R.J. (2001) Melt spinnable spandex fibers from segmented copolyetheresteraramids. Journal of Applied Polymer Science, 82 (9). pp. 2194-2203. ISSN 0021-8995

Niesten, M.C.E.J. and Tol, R. and Gaymans, R.J. (2001) Influence of type of uniform aromatic amide units on segmented copolyetheresteramides. Polymer, 42 (3). pp. 931-939. ISSN 0032-3861

2000

Bouma, K. and Groot, G.M.M. and Feijen, J. and Gaymans, R.J. (2000) Polyesteramides based on PET and nylon 2,T Part 2. Synthesis and thermal stability. Polymer, 41 (8). pp. 2727-2735. ISSN 0032-3861

Bouma, K. and Lohmeijer, J.H.G.M. and Gaymans, R.J. (2000) Polyesteramides based on PET and nylon 2,T Part 1. Synthesis of the bisesterdiamide. Polymer, 41 (8). pp. 2719-2725. ISSN 0032-3861

Bouma, K. and Wit de, G. and Lohmeijer, J.H.G.M. and Gaymans, R.J. (2000) Polyesteramides based on PET and nylon 2,T Part 3. Properties. Polymer, 41 (11). pp. 3965-3974. ISSN 0032-3861

Gaymans, R.J. and Hamberg, M.J.J. and Inberg, J.P.F. (2000) The brittle-ductile transition temperature of polycarbonate as a function of test speed. Polymer Engineering and Science, 40 (1). pp. 256-262. ISSN 0032-3888

Niesten, M.C.E.J. and Feijen, J. and Gaymans, R.J. (2000) Synthesis and properties of segmented copolymers having aramid units of uniform length. Polymer, 41 (24). pp. 8487-8500. ISSN 0032-3861

1999

Inberg, J.P.F. and Hunse, P.H. and Gaymans, R.J. (1999) Long fiber reinforcement of polypropylene/polystyrene blends. Polymer Engineering and Science, 39 (2). pp. 340-346. ISSN 0032-3888

Wal van der, A. and Gaymans, R.J. (1999) Polypropylene–rubber blends: 5. Deformation mechanism during fracture. Polymer, 40 (22). pp. 6067-6075. ISSN 0032-3861

Wal van der, A. and Gaymans, R.J. (1999) Polypropylene–rubber blends: 3. The effect of the test speed on the fracture behaviour. Polymer, 40 (22). pp. 6045-6055. ISSN 0032-3861

Wal van der, A. and Nijhof, R. and Gaymans, R.J. (1999) Polypropylene–rubber blends: 2. The effect of the rubber content on the
deformation and impact behaviour. Polymer, 40 (22). pp. 6031-6044. ISSN 0032-3861

Wal van der, A. and Verheul, A.J.J. and Gaymans, R.J. (1999) Polypropylene–rubber blends: 4. The effect of the rubber particle size on the fracture behaviour at low and high test speed. Polymer, 40 (22). pp. 6057-6065. ISSN 0032-3861

1998

Gaymans, R.J. and Wevers, E. (1998) Impregnation of a glass fibre roving with a polypropylene melt in a pin assisted process. Composites Part A: Applied Science and Manufacturing, 29 (5-6). pp. 663-670. ISSN 1359-835X

Serrano, P.J.M. and Gaymans, R.J. (1998) Alternating polyesteramides based on 1,4-butylene terephthalamide: 4. Alternating polyetheresteramides based on glycols (4NTglycol). Polymer, 39 (11). pp. 2291-2297. ISSN 0032-3861

Serrano, P.J.M. and Werff van der, B.A. and Gaymans, R.J. (1998) Alternating polyesteramides based on 1,4-butylene terephthalamide: 3. Alternating polyesteramides based on mixtures of linear diols (4NTm,p). Polymer, 39 (16-18). pp. 83-92. ISSN 0032-3861

Serrano, P.J.M. and Bennekom van, A.C.M. and Gaymans, R.J. (1998) Alternating polyesteramides based on 1,4-butylene terephthalamide: 1. Synthesis of the bisesterdiamide. Polymer, 39 (23). pp. 5773-5780. ISSN 0032-3861

Steenbrink, A.C. and Litvinov, V.M. and Gaymans, R.J. (1998) Toughening of SAN with acrylic core-shell rubber particles: particle size effect or cross-link density? Polymer, 39 (20). pp. 4817-4825. ISSN 0032-3861

Wal van der, A. and Mulder, J.J. and Gaymans, R.J. (1998) Fracture of polypropylene: 2. The effect of crystallinity. Polymer, 39 (22). pp. 5477-5481. ISSN 0032-3861

Wal van der, A. and Mulder, J.J. and Oderkerk, J. and Gaymans, R.J. (1998) Polypropylene–rubber blends: 1. The effect of the matrix properties on the impact behaviour. Polymer, 39 (26). pp. 6781-6787. ISSN 0032-3861

Wal van der, A. and Mulder, J.J. and Thijs, H.A. and Gaymans, R.J. (1998) Fracture of polypropylene: 1. The effect of molecular weight and temperature at low and high test speed. Polymer, 39 (22). pp. 5467-5475. ISSN 0032-3861

1997

Bennekom van, A.C.M. and Berg van den, D. and Bussink, J. and Gaymans, R.J. (1997) Blends of amide-modified PBT and polycarbonate: transestrification and degradation. Polymer, 38 (20). pp. 5041-5049. ISSN 0032-3861

Bennekom van, A.C.M. and Gaymans, R.J. (1997) Amide modified polybutylene terephthalate: structure and properties. Polymer, 38 (3). pp. 657-665. ISSN 0032-3861

Bennekom van, A.C.M. and Pluimers, D.T. and Bussink, J. and Gaymans, R.J. (1997) Blends of amide modified polybutylene terephthalate and polycarbonate: transesterification and degradation. Polymer, 38 (12). pp. 3017-3024. ISSN 0032-3861

Guang, Li and Gaymans, R.J. (1997) Polyesteramides with mixtures of poly(tetramethylene oxide) and 1,5 pentanediol. Polymer, 38 (19). pp. 4891-4896. ISSN 0032-3861

Niesten, M.C.E.J. and Bouma, K. and Gaymans, R.J. (1997) Alternating copolyesteramides based on mixtures of 1,4-butyleneterephthalamide and -isophthalamide and ethanediol (4NT/I2). Polymer, 39 (1). pp. 93-98. ISSN 0032-3861

Serrano, P.J.M. and Thuss, E.H.L. and Gaymans, R.J. (1997) Alternating polyesteramides based on 1,4-butylene terephthalamide: 2. alternating polyesteramides based on a single, linear diol (4NTm). Polymer, 38 (15). pp. 3839-3902. ISSN 0032-3861

1996

Bennekom van, A.C.M. and Gaymans, R.J. (1996) Amide-modified poly(butylene terephthalate): polycondensation. Polymer, 37 (24). pp. 5439-5446. ISSN 0032-3861

Bennekom van, A.C.M. and Willemsen, P.A.A.T. and Gaymans, R.J. (1996) Amide-modified poly(butylene terepthalate): thermal stability. Polymer, 37 (24). pp. 5447-5459. ISSN 0032-3861

1995

Bijsterbosch, H. and Gaymans, R.J. (1995) Polyamide 6 - long glass fiber injection moldings. Polymer Composites, 16 (5). pp. 363-369. ISSN 0272-8397

Gaymans, R.J. and Dijkstra, K. and Janik, H. (1995) Polyamide-rubber blends: micrscopic studies of the deformation zone. Polymer, 36 (22). pp. 363-368. ISSN 0032-3861

1994

Dijkstra, K. and Gaymans, R.J. (1994) Nylon-6/rubber blends: 8. Influence of the molecular weight of the matrix on the impact behaviour. Polymer, 35 (2). pp. 332-335. ISSN 0032-3861

Dijkstra, K. and Laak ter, J. and Gaymans, R.J. (1994) Nylon-6/rubber blends: 6. Notched tensile impact testing of nylon-6(ethylene-propylene rubber) blends. Polymer, 35 (2). pp. 315-322. ISSN 0032-3861

Dijkstra, K. and Wevers, H.H. and Gaymans, R.J. (1994) Nylon-6/rubber blends: 7. Temperature-time effects in the impact behaviour of nylon/rubber blends. Polymer, 35 (2). pp. 323-331. ISSN 0032-3861

Gaymans, R.J. and Werff van der, J.W. (1994) Blends of polyamide-6 with acrylic core-shell impact modifiers. Polymer, 17 (35). pp. 3658-3664. ISSN 0032-3861

Walch, E. and Gaymans, R.J. (1994) Telechelic polyisobutylene with unsaturated end groups and with anhydride end groups. Polymer, 35 (8). pp. 1774-1778. ISSN 0032-3861

Walch, E. and Gaymans, R.J. (1994) Synthesis and properties of poly(butylene terephthalate)-b-polyisobutylene segmented block copolymers. Polymer, 35 (3). pp. 636-641. ISSN 0032-3861

1993

Dijkstra, K. and Gaymans, R.J. (1993) Nylon 6-rubber blends: 9. Crack initiation and propagation under impact conditions. Polymer Communications, 34 (15). pp. 3313-3314. ISSN 0263-6476

Gaymans, R.J. and Haan de, J.L. (1993) Segmented block copolymers with polyesteramide blocks of uniform length: synthesis. Polymer, 34 (20). pp. 4360-4364. ISSN 0032-3861

Gaymans, R.J. and Haan de, J.L. and Nieuwenhuize van, O. (1993) Copolymers of PBT and nylon 4T. Journal of Polymer Science, Part A: Polymer chemistry, 31 (2). pp. 575-580. ISSN 0887-624X

Hutten van, P.F. and Mangnus, R.M. and Gaymans, R.J. (1993) Segmented copolymers with polyesteramide units of uniform length: structure analysis. Polymer, 34 (20). pp. 4193-4202. ISSN 0032-3861

Manuel, H.J. and Gaymans, R.J. (1993) Segmented block copolymers based on poly(butylene terephthalate) and telechelic polyesters and polyamides of dimerized fatty acids. Polymer, 34 (20). pp. 4325-4330. ISSN 0032-3861

Manuel, H.J. and Gaymans, R.J. (1993) Segmented block copolymers based on dimerized fatty acids and poly(butylene terephthalate). Polymer, 34 (3). pp. 636-641. ISSN 0032-3861

Walch, E. and Gaymans, R.J. (1993) Synthesis of low-molecular-weight telechelic polyisobutylene. Polymer, 34 (2). pp. 412-417. ISSN 0032-3861

1992

Janik, Helena and Walch, Eric and Gaymans, Reinoud (1992) Ruthenium tetroxide staining of polybutylene terephthalate (PBT) and polyisobutylene-b-PBT segmented block copolymers. Polymer, 33 (16). pp. 3522-3524. ISSN 0032-3861

Oostenbrink, A.J. and Gaymans, R.J. (1992) Maleic anhydride grafting on EPDM rubber in the melt. Polymer, 33 (14). pp. 3086-3088. ISSN 0032-3861

1990

Gaymans, Reinoud J. and Dijkstra, Krijn (1990) Comments on 'Percolation model for brittle-tough transition in nylon/rubber blends'. Polymer, 31 (5). p. 971. ISSN 0032-3861

Hutten van, P.F. and Walch, E. and Veeken, A.H.M. and Gaymans, R.J. (1990) Segmented block copolymers based on polyamide-4,6 and poly(propylene oxide). Polymer, 31 (3). pp. 524-529. ISSN 0032-3861

1989

Borggreve, R.J.M. and Gaymans, R.J. (1989) Impact behaviour of nylon-rubber blends: 4. Effect of the coupling agent, maleic anhydride. Polymer, 30 (1). pp. 63-70. ISSN 0032-3861

Borggreve, R.J.M. and Gaymans, R.J. and Eichenwald, H.M. (1989) Impact behaviour of nylon-rubber blends: 6. Influence of structure on voiding processes; toughening mechanism. Polymer, 30 (1). pp. 78-83. ISSN 0032-3861

Borggreve, R.J.M. and Gaymans, R.J. and Schuijer, J. (1989) Impact behaviour of nylon-rubber blends: 5. Influence of the mechanical properties of the elastomer. Polymer, 30 (1). pp. 71-77. ISSN 0032-3861

Gaymans, R.J. and Aalto, S. and Maurer, F.H.J. (1989) Copolyamides of nylon-4,6 and nylon-4,T. Journal of Polymer Science, Part A: Polymer chemistry, 27 (2). pp. 423-430. ISSN 0887-624X

Gaymans, R.J. and Borggreve, R.J.M. and Spoelstra, A.B. (1989) Ductile transition in nylon-rubber blends: influence of water. Journal of Applied Polymer Science, 37 (2). pp. 479-486. ISSN 0021-8995

Gaymans, R.J. and Schwering, P. and Haan de, J.L. (1989) Nylon 46-polytetramethylene oxide segmented block copolymers. Polymer, 30 (6). pp. 974-977. ISSN 0032-3861

1988

Borggreve, R.J.M. and Gaymans, R.J. (1988) Impact modification of poly(caprolactam) by copolymerization with a low molecular weight polybutadiene. Polymer, 29 (8). pp. 1441-1446. ISSN 0032-3861

1987

Borggreve, R.J.M. and Gaymans, R.J. and Schuijer, J. and Ingen Housz, J.F. (1987) Brittle-tough transition in nylon-rubber blends: effect of rubber concentration and particle size. Polymer, 28 (9). pp. 1489-1496. ISSN 0032-3861

1985

Gaymans, R.J. (1985) The synthesis and some properties of nylon 4,T. Journal of Polymer Science: Polymer Chemistry Edition, 23 (5). pp. 1599-1605. ISSN 0360-6376

1984

Gaymans, R.J. and Ham van der, A.G.J. (1984) Nylon 4,I: an amorphous polyamide. Polymer, 25 (12). pp. 1755-1758. ISSN 0032-3861

Gaymans, R.J. and Venkataram, V.S. and Schuijer, J. (1984) Preparation and some properties of nylon-4,2. Journal of Polymer Science: Polymer Chemistry Edition, 22 (6). pp. 1373-1382. ISSN 0360-6376

1982

Gaymans, Reinoud J. and Amirtharaj, John and Kamp, Henk (1982) Nylon 6 polymerization in the solid state. Journal of Applied Polymer Science, 27 (7). pp. 2513-2526. ISSN 0021-8995

1980

Harkema, S. and Hummel van, G.J. and Gaymans, R.J. (1980) N,N'-Tetramethylenedibenzamide (TMDB). Acta Crystallographica Section B: Structural crystallography and crystal chemistry, 36 (12). pp. 3182-3184. ISSN 0567-7408

1977

Gaymans, R.J. and Harkema, S. (1977) Melting behavior of aliphatic and aromatic diamides. Journal of Polymer Science: Polymer Chemistry Edition, 15 (3). pp. 587-590. ISSN 0360-6376

Gaymans, R.J. and Utteren, T.E.C. and Berg van den, J.W.A. and Schuyer, J. (1977) Preparation and some properties of nylon 46. Journal of Polymer Science: Polymer Chemistry Edition, 15 (3). pp. 537-545. ISSN 0360-6376

Harkema, S. and Gaymans, R.J. (1977) N,N'-(p-Phenylene)dibenzamide (PPDB). Acta Crystallographica Section B: Structural crystallography and crystal chemistry, 33 (11). pp. 3609-3611. ISSN 0567-7408

1976

Gaymans, R.J. and Tijssen, J. and Harkema, S. and Bantjes, A. (1976) Elastic modulus in the crystalline region of poly(p-phenylene terephthalamide). Polymer, 17 (6). pp. 517-518. ISSN 0032-3861

1975

Bunk, Adriaan J.H. and Regtuit, Hans G. and Berg van den, Johannes W.A. and Gaymans, Reinoud J. and Schuyer, Jan (1975) Dielectric loss of N-substituted nylon 6.6 and of polyester 6.6. Makromolekulare Chemie, 176 (11). pp. 3511-3515. ISSN 0025-116X