Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Number of items: 41.

Article

Bor, T.C. and Warnet, L. and Akkerman, R. and Boer, A. de (2010) Modeling of Stress Development During Thermal Damage Healing in Fiber-reinforced Composite Materials Containing Embedded Shape Memory Alloy Wires. Journal of Composite Materials, 44 (22). 2547 - 2572. ISSN 0021-9983

Grouve, W.J.B. and Warnet, L. and Akkerman, R. and Wijskamp, S. and Kok, J.S.M. (2010) Weld Strength Assessment for Tape Placement. International Journal of Material Forming, 3 (Suppl.). pp. 707-710. ISSN 1960-6206

Grouve, W.J.B. and Warnet, L. and Boer, A. de and Akkerman, R. and Vlekken, J. (2008) Delamination detection with fibre Bragg gratings based on dynamic behaviour. Composites Science and Technology, 68 (12). pp. 2418-2424. ISSN 0266-3538

Grouve, W.J.B. and Vanden Poel, G. and Warnet, L. and Akkerman, R. (2013) On crystallisation and fracture toughness of poly(phenylene sulphide) under tape placement conditions. Plastics rubber and composites, 42 (7). 282 - 288. ISSN 1465-8011

Grouve, W.J.B. and Warnet, L. and Akkerman, R. (2013) Critical assessment of the mandrel peel test for fiber reinforced thermoplastic laminates. Engineering fracture mechanics, 101 . 96 - 108. ISSN 0013-7944

Grouve, W.J.B. and Warnet, L. and Rietman, A.D. and Akkerman, R. (2012) On the weld strength of in situ tape placed reinforcements on weave reinforced structures. Composites Part A, Applied science and manufacturing, 43 (9). 1530 - 1536. ISSN 1359-835X

Grouve, W.J.B. and Warnet, L. and Rietman, B. and Visser, H.A. and Akkerman, R. (2013) Optimization of the tape placement process parameters for carbon–PPS composites. Composites. Part A : Applied science and manufacturing, 50 . 44 - 53. ISSN 1359-835X

Koissin, V. and Warnet, L. and Akkerman, R. (2013) Delamination in carbon-fibre composites improved with in situ. Engineering fracture mechanics, 101 . 140 - 148. ISSN 0013-7944

Kruijer, M.P. and Warnet, L.L. and Akkerman, R. (2006) Modelling of the viscoelastic behaviour of steel reinforced thermoplastic pipes. Composites Part A: Applied Science and Manufacturing, 37 (2). pp. 356-367. ISSN 1359-835X

Kruijer, M.P. and Warnet, L.L. and Akkerman, R. (2005) Analysis of the mechanical properties of a reinforced thermoplastic pipe (RTP). Composites Part A: Applied Science and Manufacturing, 36 (2). pp. 291-300. ISSN 1359-835X

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2010) Vibration based Structural Health Monitoring of a composite T-beam. Composite Structures, 92 (9). pp. 2007-2015. ISSN 0263-8223

Peeters, L.J.B. and Powell, P.C. and Warnet, L. (1996) Thermally-induced shapes of unsymmetric laminates. Journal of Composite Materials, 30 (5). pp. 603-626. ISSN 0021-9983

Qin, J. and Warnet, L.L. and Wu, Y. and Nijhuis, A. (2011) CORD, A Novel Numerical Mechanical Model for Nb3Sn CICCs. IEEE Transactions on Applied Superconductivity, 21 (3). pp. 2046-2049. ISSN 1051-8223

Qin, J. and Wu, Y. and Warnet, L.L. and Nijhuis, A. (2011) A novel numerical mechanical model for the stress–strain distribution in superconducting cable-in-conduit conductors. Superconductor Science and Technology, 24 (6). 065012. ISSN 0953-2048

Visser, H.A. and Bor, T.C. and Wolters, M. and Warnet, L.L. and Govaert, L.E. (2011) Influence of physical aging on impact embrittlement of uPVC pipes. Plastics, Rubber and Composites, 40 (5). pp. 201-212. ISSN 1465-8011

Visser, H.A. and Warnet, L.L. and Akkerman, R. (2009) An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipes. Engineering Fracture Mechanics, 76 (18). pp. 2698-2710. ISSN 0013-7944

Warnet, L. and Greasley, A. (2001) Transient forces generated by projectiles on variable quality mouthguards monitored by instrumented impact testing. British Journal of Sports Medicine, 35 (4). pp. 257-262. ISSN 0306-3674

Article News

Paternoster, A.R.A. and Loendersloot, R. and Warnet, L. and Boer, A. de and Akkerman, R. (2013) Engineers in a flap over rotor blades. Flight International . 24 - 24. ISSN 0015-3710

Book Section

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2011) Vibration based structural health monitoring and the modal strain energy damage index algorithm applied to a composite T-beam. In: Vibration and Structural Acoustics Analysis : Current Research and Related Technologies. Springer Netherlands, pp. 121-150. ISBN 9789400717022

Warnet, L.L. and Akkerman, R. and Reed, P.E. (2003) The effect of residual stress on transverse cracking in crossply carbon-polyetherimide laminates under bending. In: Fracture of Polymers, Composites and Adheives II. European Structural Integrity Society, 32 . Elsevier, pp. 465-476. ISBN 9780080441955

Conference or Workshop Item

Akkerman, R. and Reed, P.E. and Huang, K.Y. and Warnet, L. (2000) Comparison of fracture toughness (GIC) values of polyetherimide (PEI) and a carbon-fibre/PEI composite: an experimental and theoretical study. In: Second ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives, 13-15 September 1999, Les Diablerets, Switzerland (pp. pp. 3-14).

Akkerman, R. and Warnet, L.L. and Ven, E.C. van der (2002) Impact damage in woven fabric reinforced composites. In: 5th International Conference on Textile Composites, TexComp 2002, 11-13 September 2002, Philadelphia, PA, USA.

Cornelissen, B. and Warnet, L. and Akkerman, R. (2010) Friction measurements on carbon fibre tows. In: 14th International Conference on Experimental Mechanics (ICEM 14), July 4-9, 2010, Poitiers, France.

Grouve, W.J.B. and Warnet, L.L. and Akkerman, R. (2010) Towards a process simulation tool for the laseer assisted tape placement process. In: 14th European Conference on Composite Materials, ECCM 2010, June 7-10, 2010, Budapest, Hungary.

Ilin, K. and Warnet, L. and Rietman, A.D. and Akkerman, R. and Thije, R.H.W. ten (2012) Failure Modeling of Thermoplastic Butt-Joint Stiffened Panels by Quasi-Static Loading. In: SIMULIA Community Conference, SCC, 2012-05-15 - 2012-05-17, Providence RI, USA (pp. 63 - 69).

Jansma, S.H. and Rietman, A.D. and Warnet, L. and Akkerman, R. (2013) Influence of moisture content on impact properties of flax fibre reinforced polymers. In: CompositesWeek@Leuven and TexComp-11, 19-09-2013 - 20-09-2013, Leuven, Belgium.

Koissin, V. and Warnet, L. and Akkerman, R. (2010) Experimental characterization of fibre-reinforced composites improved with nanofibres or nanotubes. In: 14th International Conference on Experimental Mechanics, ICEM 2010, July 4-9, 2010, Poitiers, France.

Koissin, V. and Kotanjac, Z. and Lomov, S.V. and Gorbatikh, L. and Warnet, L. and Akkerman, R. (2010) Deformability of a Textile Reinforcement Modified with Nanofibres. In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France.

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2010) Vibration based structural health monitoring of a composite plate with stiffeners. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium (pp. 909 - 924).

Loendersloot, Richard and Ooijevaar, Ted and Warnet, Laurent and Akkerman, Remko and Boer, André de (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: Integrity Failure and Reliability - 3, 20-24 July 2009, Porto, Portugal.

Ooijevaar, T.H. and Grooteman, F.P. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2011) Dynamic characterisation of a damaged composite structure with stiffeners employing fibre bragg gratigns. In: 5th International Conference on Composites Testing and Model Simulation, CompTest 2011, February 14-16, 2011, Lausanne, Switzerland.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Akkerman, R. and Boer, A. de (2011) Structural Health Monitoring of an Advanced Composite Aircraft Structure Using a Modal Approach. In: 8th International Workshop on Structural Health Monitoring 2011, September 13-15, 2011, Stanford, CA, USA (pp. 1053 - 1062).

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: 15th International Conference on Composite Structures, ICCS, 15-17 June 2009, Porto, Portugal.

Ooijevaar, T.H. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2010) Vibration based Structural Health Monitoring of a Composite Plate Structure with Multiple Stiffeners. In: Fifth European Workshop on Structural Health Monitoring, June 28 - July 4, 2010, Sorrento, Naples, Italy.

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Boer, A. de (2013) Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure. In: 9th International Workshop on Structural Health Monitoring, IWSHM 2013: A roadmap to intelligent structures, 10-12 September 2013, Lancaster, PA, USA (pp. 445 - 453).

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2012) Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors. In: Sixth European Workshop on Structural Health Monitoring, 3-6 July 2012, Germany (pp. 232 - 239).

Ruijter, W. and Spallino, R. and Warnet, L. and Boer, A. de (2003) Optimization of composite panels using neural networks and genetic algorithms. In: Second MIT Conference on Compurational Fluid and Solid Mechanics, June 17–20, 2003, Boston MA, USA (pp. pp. 2359-2363).

Visser, H.A. and Hermkens, R.M.J. and Wolters, M. and Weller, J. and Warnet, L.L. (2008) Excellent impact performance of PVC pipeline materials in gas distribution networks after many years of service. In: International Gas Union Research Conference, IGCR, 8-10 October 2008, Paris, France.

Warnet, L. and Akkerman, R. and Ravensberg, M. (2010) High velocity impact on textile reinforced composites. In: 16th International Conference on Composite Materials, ICCM 2007, 8-13 July 2007, Kyoto, Japan.

Warnet, L. and Hulskamp, A.W. and Akkerman, R. (2006) Damage development around moulded-in holes in flat braided composites. In: 8th International Conference on Textile Composites, TexComp 2006, 16-18 October, 2006, Nottingham, UK.

Thesis

Warnet, Laurent Louis (2000) On the effect of residual stresses on the transverse cracking in cross-ply carbon-polyetherimide laminates. thesis.

This list was generated on Sat Nov 22 05:37:19 2014 CET.