Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2010 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003
Number of items: 31.

2010

Bonte, Martijn H.A. and Fourment, Lionel and Do, Tien-tho and Boogaard, A.H. van den and Huetink, J. (2010) Optimization of forging processes using Finite Element simulations : A comparison of Sequential Approximate Optimization and other algorithms. Structural and Multidisciplinary Optimization, 42 (5). 797 - 810. ISSN 1615-147X

2008

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2008) An optimisation strategy for industrial metal forming processes. Structural and Multidisciplinary Optimization, 35 (6). pp. 571-586. ISSN 1615-147X

2007

Bonte, Martijn Hans Albert (2007) Optimisation strategies for metal forming processes. thesis.

Bonte, M.H.A. and Boer, A. de and Liebregts, R. (2007) Determining the von Mises stress power spectral density for frequency domain fatigue analysis including out-of-phase stress components. Journal of Sound and Vibration, 302 (1-2). pp. 379-386. ISSN 0022-460X

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) Deterministic and robust optimisation strategies for metal forming proceesses. In: Forming Technology Forum 2007 – Application of Stochastics and Optimization Methods, 14th – 15th March 2007, ETH Zurich, Switzerland.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) A metamodel based optimisation algorithm for metal forming processes. In: Advanced Methods in Material Forming. Springer, pp. 55-72. ISBN 9783540698449

Bonte, M.H.A. and Boogaard, A.H. van den and Ravenswaaij, R. van (2007) A Robust Optimisation Strategy for Metal Forming Processes. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal (pp. pp. 493-498).

Bonte, M.H.A. and Boogaard, A.H. van den and Ravenswaaij, R. van (2007) The robust optimisation of metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 9-14).

Bonte, M.H.A. and Boogaard, A.H. van den and Veldman, E. (2007) Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 3-8).

Boogaard, A.H. van den and Bonte, M.H.A. and Ravenswaaij, R. van (2007) Computational optimisation of robust sheet forming processes. In: IDDRG 2007 International Conference, 21-23 May 2007, Gyor, Hungary.

Meinders, T. and Burchitz, I.A. and Bonte, M.H.A. and Lingbeek, R.A. (2007) Numerical product design: Springback prediction, compensation and optimization. International Journal of Machine Tools and Manufacture, 48 (5). pp. 499-514. ISSN 0890-6955

Meinders, T. and Burchitz, I. and Bonte, M.H.A. and Lingbeek, R.A. and Perdahcioglu, E.S. and Riel, M. van and Wisselink, H.H. (2007) Trends in Forming Simulation and Optimization of Sheet Metal Products. In: ASME Applied Mechanics and Materials Conference, McMat 2007, June 3-7, 2007, University of Texas, Austin.

Trichon, S. and Bonte, M.H.A. and Boogaard, A.H. van den and Ponthot, J.-P. (2007) A Study For Efficiently Solving Optimisation Problems With An Increasing Number Of Design Variables. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal (pp. pp. 481-486).

Trichon, Sophie and Bonte, Martijn and Ponthot, Jean-Philippe and Boogaard, Ton van den (2007) Aspects of approximate optimisation: overcoming the curse of dimensionality and design of experiments. In: Inverse Problems, Design and Optimization Symposium, April 16-18, 2007, Miami, Florida,U.S.A.

2006

Bonte, M.H.A. (2006) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2006) Optimisation of Forming Processes [poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Bonte, M.H.A. and Boogaard, A.H. van den and Carleer, B.D. (2006) Optimising towards robust metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 47-50).

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2006) An optimisation strategy for industrial metal forming processes: abstract WCCM 2006. In: 7th World Congress on Computational Mechanics, July 16 - 22, 2006, Los Angeles, California.

Bonte, M.H.A. and Do, T.T. and Fourment, L. and Boogaard, A.H. van den and Huetink, J. and Habbal, A. (2006) A comparison between optimisation algorithms for metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 883-886).

2005

Bonte, M.H.A. (2005) Optimisation of Forming Processes [poster]. In: Eighth Engineering Mechanica Symposium, 21-22 November 2005, Lunteren, The Netherlands.

Bonte, M.H.A. (2005) Solving optimisation problems in metal forming using FEM: A metamodel based optimisation algorithm. [Report]

Bonte, M.H.A. (2005) A comparison between optimisation algorithms for metal forming processes { With application to forging. [brace not closed] [Report]

Bonte, M.H.A. (2005) Internship at CEMEF. [Report]

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Metamodelling techniques for the optimisation of metal forming processes. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Solving optimisation problems in metal forming using Finite Element simulation and metamodelling techniques. In: Apomat conference, 2005, Morschach, Switzerland.

2004

Bonte, M.H.A. (2004) Forming processes: an introduction, CTW.04/TM-5475. [Report]

Bonte, Martijn H.A. (2004) Optimisation: An Introduction. [Report]

Bonte, M.H.A. (2004) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Bonte, M.H.A. (2004) Optimisation of Forming Processes [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Bonte, M.H.A. and Boer, A. de and Liebregts, R. (2004) Prediction of mechanical fatigue caused by multiple random excitations. In: International Conference on Noise and Vibration Engineering, ISMA, 20-22 September 2004, Leuven, Belgium (pp. pp. 697-708).

2003

Bonte, M.H.A. (2003) Optimisation of Forming Processes [poster]. In: NIMR Congress, December 8-9, 2003, Noordwijkerhout, The Netherlands.

This list was generated on Tue Jul 22 05:15:39 2014 CEST.