Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2006 | 2005 | 2004 | 2003 | 2001
Number of items: 56.

2014

Gomez Casseres Espinosa, Andres Felipe and Sanchez Ramirez, Andrea and Combita Alfonso, Luis Francisco and Loendersloot, Richard and Berkhoff, Arthur (2014) Development of a piezoelelectric based energy harvesting system for autonomous wireless sensor nodes. In: European Workshop on Structural Health Monitoring, 08-07-2014 - 11-08-2104, Nantes (F) (pp. 205 - 212).

Ooijevaar, T.H. and Loendersloot, R. and Rogge, M.D. and Akkerman, R. and Tinga, T. (2014) Vibro-Acoustic modulation based damage identification in a composite skin-stiffener structure. In: European Workshop on Structural Health Monitoring, 08-07-2014 - 11-07-2014, Nantes (F) (pp. 544 - 551).

2013

Demcenko, A. and Ravanan, M. and Visser, H.A. and Loendersloot, R. and Akkerman, R. (2013) Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurements. In: 2012 IEEE international ultrasonics symposium (IUS), Dresden, 7-10 October 2012, 07-10-2012 - 10-10-2012, Dresden (pp. 1909 - 1912).

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2013) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: New Trends in Smart Technologies. Fraunhofer Verlag, Stuttgart, 99 - 108. ISBN 9783839605776

Loendersloot, R. and Schiphorst, F.B.A. and Basten, T.G.H. and Tinga, T. (2013) Application of SHM using an autonomous sensor network. In: International Workshop on Structural Health Monitoring, 10-09-2013 - 12-09-2013, Stanford, CA, U.S.A. (pp. 854 - 861).

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Boer, A. de (2013) Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure. In: 9th International Workshop on Structural Health Monitoring, IWSHM 2013: A roadmap to intelligent structures, 10-12 September 2013, Lancaster, PA, USA (pp. 445 - 453).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de (2013) Actuator voor helikopterflaps. Technisch weekblad, 2013 .

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2013) Geometrical optimization of a hingeless deployment system for an active rotor blade. Journal of intelligent material systems and structures, 24 (7). 855 - 861. ISSN 1530-8138

Paternoster, A.R.A. and Loendersloot, R. and Warnet, L. and Boer, A. de and Akkerman, R. (2013) Engineers in a flap over rotor blades. Flight International . 24 - 24. ISSN 0015-3710

Sanchez Ramirez, A and Das, K. and Loendersloot, R. and Tinga, T. and Havinga, P.J.M. (2013) Wireless sensor network for hericopter rotor blade vibration monitoring: requirements definition and technological aspects. In: 10th Conference on Damage Assessment of Structures, DAMAS 2013, 08-10 July 2013, Dublin, Ireland (pp. pp. 775-782).

Sanchez Ramirez, Andrea and Das, Kallol and Loendersloot, Richard and Tinga, Tiedo and Havinga, Paul (2013) Wireless sensor network for helicopter rotor blade vibration monitoring: Requirements definition and technological aspects. In: 10th International Conference on Damage Assessment of Structures, DAMAS 2013, 8-10 July 2013, Dublin, Ireland (pp. pp. 775-782).

Sanchez Ramirez, Andrea and Loendersloot, Richard and Jauregui Becker, Juan Manuel and Tinga, Tiedo (2013) Design Framework for Vibration Monitoring Systems for Helicopter Rotor Blade Monitoring Using Wireless Sensor Networks. In: International Workshop on Structural Health Monitoring, 10-09-2013 - 12-09-2013, Stanford, CA, U.S.A. (pp. 1023 - 1030).

Sanchez Ramirez, Andrea and Loendersloot, Richard and Tinga, Tiedo (2013) Helicopter Rotor Blade Monitoring using Autonomous Wireless Sensor Network. In: CM 2013 and MFPT 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 18-06-2013 - 20-06-2013, Krakow, Poland (pp. 775 - 782).

2012

Demcenko, A. and Akkerman, R. and Nagy, P.B. and Loendersloot, R. (2012) Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVC. NDT & E international, 49 . 34 - 39. ISSN 0963-8695

Jong, P.H. de and Boer, A. de and Loendersloot, R. and Hoogt, P.J.M. van der (2012) Power harvesting in a helicopter rotor using a piezo stack in the lag damper. Journal of intelligent material systems and structures, 24 (11). 1392 - 1404. ISSN 1530-8138

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2012) Lab-scale experimental validation of a piezoelectric energy harvesting lag damper. In: 38th European Rotocraft Forum, ERF 2012, 4-7 September 2012, Amsterdam (pp. 1 - 8).

Loendersloot, R. and Grouve, W.J.B. and Lamers, E.A.D. and Wijskamp, S. (2012) Textile impregnation with thermoplastic resin - models and application. In: Flow Processes in Composite Materials, 2012-07-09 - 2012-07-12, Auckland, NZ (pp. 344 - 351).

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2012) Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors. In: Sixth European Workshop on Structural Health Monitoring, 3-6 July 2012, Germany (pp. 232 - 239).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Simulation of Flexible Mechanisms in a Rotating Blade for Smart-Blade Applications. In: European Rotorcraft Forum, 4-7 September 2012, Amsterdam (pp. 1 - 8).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Smart actuation for helicopter rotorblades. In: Smart actuation and sensing systems - Recent advances and future challenges. Intech open, 657 - 678. ISBN 9789535107989

2011

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2011) Power harvesting in a helicopter lag damper. In: SMART'11, July 6-8, 2011, Saarbrucken, Germany.

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2011) Power harvesting in a helicopter lag damper. In: 37th European Rotorcraft Forum, September 13-15, 2011, Ticino Park, Milan, Italy (pp. 1185 - 1192).

Loendersloot, R. (2011) Permeability of non-crimp fabric preforms. In: Noncrimp Fabric Composites : Manufacturing, Properties and Applications. Woodhead Publishing, pp. 166-215. ISBN 9781845697624

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2011) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: SMART'11, July 6-8, 2011, Saarbrucken, Germany (pp. 197 - 212).

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2011) Vibration based structural health monitoring and the modal strain energy damage index algorithm applied to a composite T-beam. In: Vibration and Structural Acoustics Analysis : Current Research and Related Technologies. Springer Netherlands, pp. 121-150. ISBN 9789400717022

Loendersloot, Richard , ed. (2011) SAMPE Benelux Student Seminar : Book of Abstracts. University of Twente, Enschede, the Netherlands.

Ooijevaar, T.H. and Grooteman, F.P. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2011) Dynamic characterisation of a damaged composite structure with stiffeners employing fibre bragg gratigns. In: 5th International Conference on Composites Testing and Model Simulation, CompTest 2011, February 14-16, 2011, Lausanne, Switzerland.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Akkerman, R. and Boer, A. de (2011) Structural Health Monitoring of an Advanced Composite Aircraft Structure Using a Modal Approach. In: 8th International Workshop on Structural Health Monitoring 2011, September 13-15, 2011, Stanford, CA, USA (pp. 1053 - 1062).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2011) Geometric optimisation of a gurney flap henge-less deployment system for a helicopter model blade. In: European Rotorcraft Forum, Milaan, Italy.

Paternoster, Alexandre and Loendersloot, Richard and Boer, André de and Akkerman, Remko (2011) Geometric Optimisation of Hinge-less Deployment System for an Active Rotorblade. In: ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011, September 18-21, 2011, Scottsdale, AZ, USA.

2010

Jong, P.H. de and Boer, A. de and Loendersloot, R. and Hoogt, P.J.M. van der (2010) Power harvesting using piezomaterial in a helicopter rotor blade. In: 17th International Congress on Sound & Vibration, ICSV, 18-22 July, 2010, Cairo, Egypt.

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2010) Vibration based structural health monitoring of a composite plate with stiffeners. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium (pp. 909 - 924).

Loendersloot, Richard and Grouve, Wouter J.B. and Akkerman, Remko and Boer, André de (2010) Development of a multigrid finite difference solver for benchmark permeability analysis. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2010) Vibration based Structural Health Monitoring of a composite T-beam. Composite Structures, 92 (9). pp. 2007-2015. ISSN 0263-8223

Ooijevaar, T.H. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2010) Vibration based Structural Health Monitoring of a Composite Plate Structure with Multiple Stiffeners. In: Fifth European Workshop on Structural Health Monitoring, June 28 - July 4, 2010, Sorrento, Naples, Italy.

Paternoster, Alexandre and Boer, André de and Loendersloot, Richard and Akkerman, Remko (2010) Actuators for smart applications. In: ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2010-3905, September 28 - October 1, 2010, Philadelphia, Pennsylvania.

2009

Loendersloot, Richard and Ooijevaar, Ted and Warnet, Laurent and Akkerman, Remko and Boer, André de (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: Integrity Failure and Reliability - 3, 20-24 July 2009, Porto, Portugal.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: 15th International Conference on Composite Structures, ICCS, 15-17 June 2009, Porto, Portugal.

2008

Grouve, W.J.B. and Akkerman, R. and Loendersloot, R. and Berg, S. van den (2008) Multi-scale effects in the consolidation of thermoplastic laminates. International Journal of Material Forming, 1 (Suppl.). pp. 859-862. ISSN 1960-6206

Grouve, W.J.B. and Akkerman, R. and Loendersloot, R. and Berg, S. van den (2008) Transverse permeability of woven fabrics. In: 11th ESAFORM Conference on Material Forming 2008, April 23-25, 2008, Lyon, France.

Loendersloot, R. and Grouve, W.J.B. and Akkerman, R. and Berg, S. van den (2008) Permeability prediction using a multigrid method. In: 9th International Conference on Flow Processes in Composite Materials, FPCM-9 2008, 8-10 July 2008, Montreal, Canada.

2006

Loendersloot, R. and Akkerman, R. (2006) A permeability prediction for non-crimp fabrics. In: ESAFORM 2006, 26-28 April 2006, Strathclyde, Glasgow.

Loendersloot, R. and Akkerman, R. (2006) A permeability prediction for non-crimp fabrics. In: The 8th International Conference on Flow Processes in Composite Materials (FPCM8, 11-13 July 2006, Douai, France.

Loendersloot, R. and Lomov, S.V. and Akkerman, R. and Verpoest, I. (2006) Carbon composites based on multiaxial multiply stitched preforms. Part V: geometry of sheared biaxial fabrics. Composites Part A: Applied Science and Manufacturing, 37 (1). pp. 103-113. ISSN 1359-835X

Loendersloot, Richard (2006) The structure-permeability relation of textile reinforcements. thesis.

Ven, E.C. van der and Loendersloot, R. and Akkerman, R. (2006) Experimental investigation of the compressibility and permeability of fabric reinforcements. In: 8th International Conference on Flow Processes in Composite Materials, FPCM 2006, 11-13 July 2006, Douai, France.

Ven, E.C. van der and Loendersloot, R. and Akkerman, R.A. (2006) Experimental verification of out-of-plane permeability : powerpoint presentation. In: 3rd International Symposium on Manufacturing Technology for Composite Aircraft Structures, 17-18 May 2006.

Ven, E.C. van der and Loendersloot, R. and Akkerman, R.A. (2006) Experimental investigation of the compressibility and permeability of fabric reinforcements : abstract. In: 3rd International Symposium on Manufacturing Technology for Composite Aircraft Structures, 17-18 May 2006, Marknesse, the Netherlands.

2005

Lomov, S.V. and Barburski, M. and Stoilova, Tz. and Verpoest, I. and Akkerman, R. and Loendersloot, R. and Thije, R.H.W. ten (2005) Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preforms. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1188-1206. ISSN 1359-835X

Thije, R.H.W. ten and Akkerman, R. and Loendersloot, R. (2005) Drape simulation of non-crimp fabrics. In: 8th ESAFORM Conference on Material Forming 2005, April 27-29, 2005, Cluj-Napoca, Romania.

2004

Loendersloot, R. and Akkerman, R. (2004) Permeability Experiments: Design, development and methodology of a resin transfer moulding measuring device [Abstract]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Loendersloot, R. and Akkerman, R. and Lomov, S.V. (2004) A permeability prediction for (un)sheared non-crimp fabrics. In: 7th International Conference on Flow Processes in Composite Materials, 7-9 July 2004, Newark, Delaware, USA.

Loendersloot, R. and Ruijter, W. and Akkerman, R. (2004) Multigrid & Network Approach based Permeability Prediction [Poster]. In: 7th engineering mechanics symposium, November 22-23 2004, Rolduc, Kerkrade.

Loendersloot, R. and Thije, R.H.W. ten and Akkerman, R. and Lomov, S.V. (2004) Permeability prediction of non-crimp fabrics based on a geometric model. In: 11th European conference on composite materials, May 31 - June 3, 2004, Rhodes, Greece.

2003

Loendersloot, R. and Thije, R.H.W. ten and Akkerman, R. and Lomov, S.V. (2003) Permeability Prediction of Non-Crimp Fabrics Based on a Geometric Model. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

2001

Loendersloot, R. and Akkerman, R. (2001) Resin Transfer Moulding of high performance composites [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

This list was generated on Tue Jul 29 05:12:02 2014 CEST.