Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Number of items: 64.

Article

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Geijselaers, H.J.M. and Boer, A. de (2011) Updating the Craig–Bampton reduction basis for efficient structural reanalysis. International Journal for Numerical Methods in Engineering, 85 (5). pp. 607-624. ISSN 0029-5981

Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Ellenbroek, M.H.M. and Boer, A. de (2012) Dynamic substructuring and reanalysis methods in a surrogate based design optimization environment. Structural and multidisciplinary optimization, 45 . 129 - 138. ISSN 1615-147X

Assaad, W. and Geijselaers, H.J.M. and Nilsen, K.E. (2009) Measuring the Deformation of a Flat Die by Applying a Laser Beam on a Reflecting Surface. Key Engineering Materials, 424 . 197 - 204. ISSN 1013-9826

Datta, K. and Delhez, R. and Bronsveld, P.M. and Beyer, J. and Geijselaers, H.J.M. and Post, J. (2009) A low-temperature study to examine the role of epsilon-martensite during strain-induced transformations in metastable austenitic stainless steels. Acta Materialia, 57 . 3321 - 3326. ISSN 1359-6454

Gadgil, V.J. and Geijselaers, H.J.M. (1993) Effect of cathodic hydrogen charging on the surface of duplex stainless steel. Scripta Metallurgica et Materialia, 28 (12). pp. 1489-1494. ISSN 0956-716X

Geijselaers, H.J.M. and Huetink, J. (2003) A second order discontinuous Galerkin method for advection on unstructured triangular meshes keywords: advection convection discontinuous galerkin finite elements. Communications in Numerical Methods in Engineering, 19 (4). pp. 275-284. ISSN 1069-8299

Geijselaers, H.J.M. and Perdahcioglu, E.S. (2009) Mechanically induced martensitic transformation as a stress-driven process. Scripta Materialia, 60 (1). 29 - 31. ISSN 1359-6462

Geijselaers, H.J.M. and Tijdeman, H. (1991) The dynamic mechanical characteristics of a resonating microbridge mass-flow sensor. Sensors and Actuators A: Physical, 29 (1). pp. 37-41. ISSN 0924-4247

Geijselaers, Hubert J. M. and Koning, Annette J. E. (2000) Finite Element Analysis of Thermoelastic Instability With Intermittent Contact. Journal of Tribology, 122 (1). pp. 42-46. ISSN 0742-4787

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. (2013) The influence of austenite texture on the martensitic transformation of an austenitic stainless steel. Journal of alloys and compounds, 577S . 609 - 613. ISSN 0925-8388

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Akkerman, R. (2013) Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of gamma-texture. Materials science & engineering A, 573 . 100 - 105. ISSN 0921-5093

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2008) Flow front tracking in ALE/Eulerian formulation FEM simulations of aluminium extrusion. Key Engineering Materials, 367 . pp. 39-46. ISSN 1013-9826

Meinders, T. and Carleer, B.D. and Geijselaers, H.J.M. and Huetink, J. (1998) The implementation of an equivalent drawbead model in a finite-element code for sheet metal forming. Journal of Materials Processing Technology, 83 (1-3). pp. 234-244. ISSN 0924-0136

Perdahcioglu, E. Semih and Geijselaers, Hubert J.M. (2010) Constitutive modeling of two phase materials using the Mean Field method for homogenization. International Journal of Material Forming, 4 (2). pp. 93-102. ISSN 1960-6206

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2009) Constitutive modeling of metastable austenitic stainless steel. International Journal of Material Forming, 2 (Suppl.). pp. 419-422. ISSN 1960-6206

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2012) A macroscopic model to simulate the mechanically induced martensitic transformation in metastable austenitic stainless steels. Acta materialia, 60 (11). 4409 - 4419. ISSN 1359-6454

Perdahcıoğlu, E.S. and Geijselaers, H.J.M. and Groen, M. (2008) Influence of plastic strain on deformation-induced martensitic transformations. Scripta Materialia, 58 (11). pp. 947-950. ISSN 1359-6462

Perdahcıoğlu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Influence of stress state and strain path on deformation induced martensitic transformations. Materials Science and Engineering A: Structural materials, 481-48 (1-2). pp. 727-731. ISSN 0025-5416

Post, J. and Nolles, H. and Datta, K. and Geijselaers, H.J.M. (2008) Experimental determination of the constitutive behaviour of a metastable austenitic stainless steel. Materials Science and Engineering A: Structural materials, 498 (1-2). pp. 179-190. ISSN 0025-5416

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. Key engineering materials, 554-557 . 1014 - 1021. ISSN 1013-9826

Book Section

Datta, K. and Geijselaers, H.J.M. and Post, J. and Beyer, J. and Huetink, J. (2007) Modelling the Material Behaviour of Metastable Stainless Steels. In: NUMIFORM '07: Materials processing and design: modeling, simulation and applications. American Institute of Physics, pp. 655-660. ISBN 9780735404151

Conference or Workshop Item

Assaad, W. and Geijselaers, H.J.M. and Huetink, J. (2009) Boundary conditions applied on bearing corner in direct aluminum extrusion. In: Esaform 2009, the 12th International ESAFORM Conference on Material Forming, April 27-29, 2009, Enschede.

Assaad, W. and Geijselaers, H.J.M. (2010) Coupled analysis of material flow and die deflection in direct aluminum extrusion. In: Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France.

Assaad, W.A. and Geijselaers, H.J.M. and Huetink, J. (2008) 3-D Numerical Simulation of Direct Aluminum Extrusion and Die Deformation. In: ET '08, the Conference for Innovations in Aluminum Extrusion, May 13-16, 2008, Gaylord Palms Orlando, FL, USA .

Datta, K. and Post, J.A. and Geijselaers, H.J.M. and Huetink, J. (2002) Finite element modelling of concurrent deformation and transformation in metastable steels. In: ABAQUS World Users Conference, 28-31 May, 2002, New Port, RI, USA.

Datta, K. and Akagi, H. and Geijselaers, H.J.M. and Huetink, J. (2003) Finite Element Modelling of Bends and Creases during Folding Ultra Thin Stainless Steel Foils. In: ABAQUS Users' Conference 2003, November 24-25, 2003, Vienna.

Datta, K. and Hommes, M. and Post, J. and Geijselaers, H.J.M. and Huetink, H. and Beyer, J. (2003) Constitutive modelling of Sandvik 1RK91. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

De Guido, S. and Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Boer, A. de (2011) On a novel approach for optimizing composite materials panel using surrogate models. In: 3rd ECCOMAS Thematic Conference on Mechanical Response of Composites 2011, 21-23 September 2011, Hannover, Germany (pp. 439 - 446).

De Guido, S. and Geijselaers, H.J.M. and Boer, A. de (2011) Mixed continuous-discrete variable optimization of composite panels using surrogate models. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

De Guido, Samuele and Geijselaers, H.J.M. and Boer, André de (2011) Continuous-discrete variable optimization on composites using kriging surrogate model. In: 16th International Conference on Composite Structures, ICCS 2011, 28-30 June 2011, Porto, Portugal.

Geijselaers, H.J.M. and Huetink, J. (2000) Semi implicit second order discontinuous Galerkin convection for ALE calculations. In: ECCOMAS, European Congress on Computational Methods in Applied Sciences and Engineering, 11-14 September 2000, Barcelona, Spain.

Geijselaers, H.J.M. and Huetink, H. (2004) Thermo-Mechanical Analysis with Phase Transformations. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 1508-1513).

Geijselaers, H.J.M. and Huetink, J. (2001) Convection by means of least squares projection for ALE calculations. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Geijselaers, H.J.M. and Huetink, J. (2004) Simulation of Steady Laser Hardening by an Arbitrary Lagrangian Eulerian Method. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Geijselaers, H.J.M. and Yu, Yuhong and Huetink, J. (2001) Simulation of Steady State Laser Hardening. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2013) Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels. In: The 11th International Conference on Numerical Methods in Forming Processes, NUMIFORM2013, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 175 - 182).

Geijselaers, H.J.M. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2012) A macro scale constitutive model for TRIP steel. In: ECCOMAS 2012, September 10-14, 2012, Vienna, Austria (pp. CD-ROM ).

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2007) Numerical Forming Simulations and Optimisation in Advanced Materials. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 281-286).

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2000) Improvements in FE-analysis of real-life sheet metal forming. In: European Congress on Computational Methods in Applied Science and Engineering, ECCOMAS 2000, 11-14 September 2000, Barcelona.

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, V.T. (2000) Numerical and physical modelling in forming. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2006) Flow front tracking in aluminium extrusion dies by means of particle trajectories [Poster]. In: 9th Engineering Mechanics Symposium, October 26-27, 2006, Lunteren, the Netherlands.

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2010) Mould filling analysis of aluminium extrusion dies. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 290 - 295).

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. and Nilsen, K.E. and Koenis, P.T.G. (2007) A SUPG approach for determining frontlines in aluminium extrusion simulations and a comparison with experiments. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 602-607).

Koopman, A.J. and Geijselaers, H.J.M. and Nilsen, K.E. and Koenis, P.T.G. (2008) Numerical flow front tracking for aluminium extrusion of a tube and a comparison with experiments. In: 11th ESAFORM Conference on Material Forming, 23-25 april 2008, Lyon, France.

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1998) Implementation of plastic thickness strain in an equivalent drawbead model based on a penalty constrained model. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1999) Equivalent drawbead performance in deep drawing simulations. In: Numisheet conference, 1999.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Mechanical tests and constitutive modeling of metastable austenitic stainless steels [em poster]. In: EM symposium, November 21-22, 2005, Lunteren, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Tailoring of metastable steels [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Perdahcioglu, E. Semih and Geijselaers, H.J.M. (2011) Constitutive modeling of multiphase materials including phase transformations. In: International Symposium on Plasticity and Its Current Applications, January 3-8, 2011, Puerto Vallarta, Mexico.

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2010) A constitutive model for multi-phase steels. In: Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France.

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2011) A model for TRIP steel constitutive behaviour. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Perdahcioglu, E.S. and Geijselaers, H.J.M. (2011) Prediction of the mechanical behaviour of TRIP steel. In: 10th International Conference on the Technology of Plasticity, ICTP 2011, September 25th-30th, 2011, Aachen.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2004) Tailoring of Metastable Steels [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Influence of Stress state and Strain path on deformation induced martensitic transformations. In: ESOMAT 2006, 7th European Symposium on Martensitic Transformations and Shape Memory Alloys, September 10th to 15th, 2006, Bochum, Germany.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2007) A stress integration algorithm for phase transforming steels. In: IX international conference on computational plasticity COMPLAS, 2007, Barcelona.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2010) Mean field modeling of metastable austenitic stainless steel. In: International Symposium on Plasticity, January 3-8, 2010, St. Kitts.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Constitutive modeling of metastable austenitic stainless steel. In: 11th ESAFORM2008 Conference on Material Forming, April 23-25, 2008, Lyon, France.

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Quak, W. and Akkerman, R. and Huetink, J. (2011) Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Quak, W. and Akkerman, R. and Huetink, J. (2011) Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 1290 - 1295).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. In: ESAFORM 2013, 22-04-2013 - 24-04-2013, Aveiro (pp. 1014 - 1021).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Huetink, J. (2012) Free surface modeling of contacting solid metal flows employing the ALE formulation. In: ESAFORM 2012, Erlangen (pp. 431 - 436).

Wang, C. and Boogaard, A.H. van den and Omerspahic, E. and Recina, V. and Geijselaers, H.J.M. (2014) Influence of feed rate on damage development in hot ring rolling. In: 11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014, Nagoya Congress Center, Nagoya, Japan, 19-10-2014 - 24-10-2014, Nagoya, Japan (pp. 292 - 297).

Wang, C. and Geijselaers, H.J.M. and Boogaard, A.H. van den (2013) Multi-Stage FE Simulation of Hot Ring Rolling. In: The 11th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 2013, 6–10 July 2013, Shenyang, China, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 1014 - 1019).

Thesis

Geijselaers, H.J.M. (2003) Numerical Simulation of Stresses due to Solid State Transformations : The Simulation of Laser Hardening. thesis.

This list was generated on Sat Dec 27 05:26:48 2014 CET.