Author Publications

2010

Graaf de, Menno and Aarts, Ronald and Jonker, Ben and Meijer, Johan (2010) Real-time seam tracking for robotic laser welding using trajectory-based control. Control Engineering Practice, 18 (8). pp. 944-953. ISSN 0967-0661

2009

Römer, G.R.B.E. and Huis in 't Veld, M.H.A. and Meijer, J. and Groenendijk, M.N.W. (2009) On the formation of laser induced self-organizing nanostructures. CIRP Annals, 58 (1). pp. 201-204. ISSN 0007-8506

2008

Jauregui, J.M. and Aalderink, B.J. and Aarts, R.G.K.M. and Olde Benneker, J. and Meijer, J. (2008) Design, implementation and testing of a fuzzy control scheme for laser
welding. Journal of laser applications, 20 (3). pp. 146-153. ISSN 1042-346X

2007

Aalderink, B.J. and Aarts, R.G.K.M. and Lange de, D.F. and Meijer, J. (2007) Experimental observation of keyhole shapes in the laser welding of aluminum blanks. Journal of laser applications, 19 (4). pp. 245-251. ISSN 1042-346X

Aalderink, B.J. and Lange de, D.F. and Aarts, R.G.K.M. and Meijer, J. (2007) Keyhole shapes during laser welding of thin metal sheets. Journal of Physics D: Applied Physics, 40 (17). pp. 5388-5393. ISSN 0022-3727

Entzinger, Jorg and Iakovou, Dimitrios and Aarts, Ronald and Meijer, Johan (2007) Improving coaxial measurements in laser welding by correcting distortions of a laser focus lens with a wide field of view. Journal of laser applications, 19 (3). pp. 141-148. ISSN 1042-346X

Graaf de, M.W. and Aarts, R.G.K.M. and Meijer, J. and Jonker, J.B. (2007) Ethernet-based communication framework for sensor integration on industrial robots. In: RoboComm '07: proceedings of the 1st international conference on Robot communication and coordination. ACM. ISBN 9789639799080

Kovalenko, V. and Golovko, L. and Meijer, J. and Anyakin, M. (2007) New Developments in Laser Sintering of Diamond Cutting Disks. CIRP Annals, 56 (1). pp. 189-192. ISSN 0007-8506

Lentjes, M. and Dickmann, K. and Meijer, J. (2007) Calculation and optimization of sample identification by laser induced breakdown spectroscopy via correlation analysis. Spectrochimica Acta, Part B: Atomic Spectroscopy, 62 (1). pp. 56-62. ISSN 0584-8547

2006

Groenendijk, M.N.W. and Meijer, J. (2006) Surface Microstructures obtained by Femtosecond Laser Pulses. CIRP Annals, 55 (1). pp. 183-186. ISSN 0007-8506

2005

Aalderink, B.J. and Aarts, R.G.K.M. and Jonker, J.B. and Meijer, J. (2005) Experimental observations of the laser keyhole welding process of AA5182. In: International Conference on Applications of Lasers and Electro-optics, ICALEO'05, 31 Oct. – 3 Nov. 2005, Miami, USA.

Aalderink, B.J. and Aarts, R.G.K.M. and Jonker, J.B. and Meijer, J. (2005) Shedding Light on Laser Welding [poster]. In: Eight Engineering Mechanics Symposium, EM, November 21-22, 2005, Lunteren, The Netherlands.

Aalderink, B.J. and Aarts, R.G.K.M. and Jonker, J.B. and Meijer, J. (2005) Weld Plume Emissions During Nd:YAG Laser Welding. In: Third International WLT-conference on Lasers in Manufacturing, June 13th - 16th, 2005, Munich, Germany.

Dickmann, K. and Lentjes, M. and Meijer, J. (2005) Online Diagnostics for Laser Cleaning of Artworks. In: CLEO EUROPE EQEC 2005, 12-17 June 2005, Munich, Germany.

Graaf de, M.W. and Aarts, R.G.K.M. and Meijer, J. and Jonker, J.B. (2005) Robot-sensor synchronization for real-time seamtracking in robotic laser welding. In: Third International WLT-conference on Lasers in Manufacturing, June 13th - 16th, 2005, Munich, Germany.

Graaf de, M.W. and Olde Benneker, J. and Aarts, R.G.K.M. and Meijer, J. and Jonker, J.B. (2005) Robust process-controller for Nd:YAG welding. In: International Conference on Applications of Lasers and Electro-optics, ICALEO'05, 31 Oct. – 3 Nov. 2005, Miami, USA.

Groenendijk, Max and Meijer, Johan (2005) Microstructuring using femtosecond pulsed laser ablation. In: International Conference on Applications of Lasers and Electro-optics, ICALEO'05, 31 Oct. - 3 Nov. 2005, Miami, USA.

Iakovou, D. and Aarts, R.G.K.M. and Meijer, J. (2005) Integrated sensors for robotic laser welding. In: Third International WLT-conference on Lasers in Manufacturing, June 13th - 16th, 2005, Munich, Germany.

Iakovou, Dimitrios and Aarts, Ronald and Meijer, Johan (2005) Sensor integration for robotic laser welding processes. In: International Conference on Applications of Lasers and Electro-optics, ICALEO'05, 31 Oct. – 3 Nov. 2005, Miami, USA.

Lange de, D.F. and Hofman, J.T. and Meijer, J. (2005) Influence of intensity distribution on the meltpool and clad shape for laser cladding. In: Third International WLT-conference on Lasers in Manufacturing, June 13th - 16th, 2005, Munich, Germany.

Lange de, Dirk F. and Hofman, Johannes T. and Meijer, Johan (2005) Optical characteristics of Nd:YAG optics and distortions at high power. In: International Conference on Applications of Lasers and Electro-optics, ICALEO'05, 31 Oct. – 3 Nov. 2005, Miami, USA.

Lentjes, Marco and Dickmann, Klaus and Meijer, Johan (2005) Prozesskontrolle bei der Laserreinigung durch Plasmaanalyse mittels niedrig auflosendem Spektrometer. Photonik, 37 (3). pp. 84-87. ISSN 14329778

Lentjes, Marco and Dickmann, Klaus and Meijer, Johan (2005) Prozessüberwachung beim Laserreinigen und Laserschichtabtrag durch Anwendung der Plasmaanalyse mittels "low resolution" Spektrometer. In: 2. Remagener Physiktage 2004, 29. September - 1. Oktober 2004, RheinAhrCampus Remagen, Koblenz.

Lentjes, Marco and Dickmann, Klaus and Meijer, Johan (2005) Controlled Laser Cleaning of Artworks with Low Resolution LIBS and Linear Correlation Analysis. In: International Conference on Applications of Lasers and Electro-optics, ICALEO'05, 31 Oct. – 3 Nov. 2005, Miami, USA.

Schoonderbeek, A. and Biesheuvel, C.A. and Hofstra, R.M. and Boller, K.-J. and Meijer, J. (2005) Shadowgraphic imaging of material removal during laser drilling with a long pulse eximer laser. Applied physics A: Materials science & processing, 80 (4). pp. 769-775. ISSN 0947-8396

Vollertsen, F. and Partes, K. and Meijer, J. (2005) State of the Art of Laser Hardening and Cladding. In: Third International WLT-conference on Lasers in Manufacturing, June 13th - 16th, 2005, Munich, Germany.

2004

Choi, Kyung Hyun and Meijer, Johan and Masuzawa, Takahisa and Kim, Dae-Hyun (2004) Excimer laser micromachining for 3D microstructure. Journal of Materials Processing Technology, 149 (1-3). pp. 561-566. ISSN 0924-0136

Meijer, Johan (2004) Laser beam machining (LBM), state of the art and new opportunities. Journal of Materials Processing Technology, 149 (1-3). pp. 2-17. ISSN 0924-0136

2002

Meijer, J. and Du, K. and Gillner, A. and Hoffmann, D. and Masuzawa, T. and Ostendorf, A. and Poprawe, R. and Schulz, W. (2002) Laser Machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons. CIRP Annals, 51 (2). pp. 531-550. ISSN 0007-8506

Postma, S. and Aarts, R.G.K.M. and Meijer, Johan and Jonker, J.B. (2002) Penetration control in laser welding of sheet metal. Journal of laser applications, 14 (4). pp. 210-214. ISSN 1042-346X

2001

Römer, G.R.B.E. and Weerkamp, N.P. and Meijer, J. and Postma, S. (2001) Nonminimum Phase Behavior of Laser Material Processing. In: ICALEO 2001, October 15018 2001, Jacksonville, Florida.

2000

Graaf de, R.F. and Meijer, J. (2000) Laser cutting of metal laminates: analysis and experimental validation. Journal of Materials Processing Technology, 103 (1). pp. 23-28. ISSN 0924-0136

Römer, G.R.B.E. and Meijer, J. (2000) Inverse Calculation of Power Density for Laser Surface Treatment. CIRP Annals, 49 (1). pp. 135-138. ISSN 0007-8506

1997

Römer, GertWillem R. and Meijer, Johan (1997) Analytical model describing the relationship between laser power, beam velocity, and melt pool depth in the case of laser remelting, realloying, and redispersing. In: Cladding and alloying II. Proceedings of SPIE, 3097 . SPIE, pp. 507-515.

1995

Römer, G.R.B.E. and Meijer, J. (1995) Metal surface temperature induced by moving laser beams. Optical and quantum electronics, 27 (12). pp. 1397-1406. ISSN 0306-8919

1991

Meijer, J. and Sprang van, I. (1991) Optimization of Laser Beam Transformation Hardening by One Single Parameter. CIRP Annals, 40 (1). pp. 183-186. ISSN 0007-8506

1990

Meijer, J. and Heuvelman, C.J. (1990) Accuracy of Surface Plate Measurements - General Purpose Software for Flatness Measurement. CIRP Annals, 39 (1). pp. 545-548. ISSN 0007-8506

1985

Meijer, J. and Bot, G.P.A. and Stanghellini, C. and Udink ten Cate, A.J. (1985) Development and application of a sensitive, high precision weighing lysimeter for use in greenhouses. Journal of Agricultural Engineering Research, 32 (4). pp. 321-336. ISSN 0021-8634

1984

Meijer, J. and Veringa, J.C.M. (1984) Characteristic numbers to describe the detail transfer quality of electro-chemical machining. Precision Engineering, 6 (2). pp. 79-82. ISSN 0141-6359

1981

Bruin de, W. and Meijer, J. (1981) Some results of flatness measurement. Precision Engineering, 3 (1). pp. 23-26. ISSN 0141-6359

Meijer, J. and Bruin de, W. (1981) Determination of flatness from straightness measurements and characterization of the surface by four parameters. Precision Engineering, 3 (1). pp. 17-22. ISSN 0141-6359

1980

Bruin de, W. and Meijer, J. (1980) Analysis of Flatness Measurement and Form Stability of a Granite Surface Plate. CIRP Annals, 29 (16). pp. 385-390. ISSN 0007-8506

Meijer, J. (1980) Reduction of heat losses from greenhouses by means of internal blinds with low thermal emissivity. Journal of Agricultural Engineering Research, 25 (4). pp. 381-390. ISSN 0021-8634