Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998
Number of items: 47.

2013

Niazi, M.S. and Meinders, V.T. and Wisselink, H.H. and Horn, C.H.L.J. ten and Klaseboer, G. and Boogaard, A.H. van den (2013) A Plasticity Induced Anisotropic Damage Model for Sheet Forming Processes. Key engineering materials, 554-557 . 1245 - 1251. ISSN 1013-9826

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Boogaard, A.H. van den (2013) Material Induced Anisotropic Damage in DP600. International journal of damage mechanics, 22 (7). 1039 - 1070. ISSN 1530-7921

2012

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. (2012) Viscoplastic Regularization of Local Damage Models: A Latent Solution. Key engineering materials, 504-506 . 845 - 850. ISSN 1013-9826

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. (2012) Viscoplastic regularization of local damage models: revisited. Computational mechanics, 51 (2). 203 - 216. ISSN 0178-7675

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Boogaard, A.H. van den (2012) Material Induced Anisotropic Damage. In: 5th Forming Technology Forum 2012, June 5-6, 2012, Zurich (pp. 23 - 28).

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Huetink, J. (2012) Failure Predictions for DP Steel Cross-die Test Using Anisotropic Damage. International journal of damage mechanics, 21 . 713 - 754. ISSN 1530-7921

Niazi, M.S. and Wisselink, H.H. and Meinders, T. (2012) Validation of Modified Lemaitre’s Anisotropic Damage Model with the Cross Die Drawing Test. Key Engineering Materials, 488 . 49 - 52. ISSN 1013-9826

Wisselink, H.H. and Nagy, G.T. and Meinders, V.T. (2012) Application of Wrinkling Criterion for Prediction of Side-Wall Wrinkles in Deepdrawing of Conical Cups. In: International Deep Drawing Research Group Conference 2012: Lightweighting: Possibilities & Challenges, 25-29 November 2012, Mumbai (pp. 301 - 306).

2011

Kurukuri, Srihari and Miroux, Alexis and Wisselink, Harm and Boogaard, Ton van den (2011) Simulation of stretch forming with intermediate heat treatments of aircraft skins - a physically based modeling approach. International Journal of Material Forming, 4 (2). 129 - 140. ISSN 1960-6206

Wisselink, H.H. and Niazi, M.S. and Huetink, J. (2011) Validation of advanced material models using the crossdie test. In: IDDRG Conference 2011: Towards sutainable sheet forming processes, 5-8 June 2011, Bilbao, Spain.

2010

Niazi, Muhammad and Wisselink, Harm and Meinders, Timo and Horn, Carel ten (2010) Implementation of an anisotropic damage material model using general second order damage tensor. In: 13th International Conference on Metal Forming, Metal Forming 2010, September 19-22, 2010, Toyohashi, Japan (pp. 1396 - 1399).

Wisselink, H.H. and Huetink, J. (2010) Modelling of failure in sheet forming using cohesive elements. In: 9th World Congress on Computational Mechanics & 4th Asian Pacific Congress on Computational Mechanics, WCCM/APCOM 2010, July 19-23, 2010, Sydney (pp. - ).

2009

Niazi, M.S. and Wisselink, H.H. and Meinders, T. and Huetink, J. (2009) Implementation of an anisotropic damage material model for non-proportional loading. In: COMPLAS X, International Conference on Computational Plasticity, 2-4 September 2009, Barcelona.

Wisselink, H.H. and Huetink, J. (2009) Modelling of ductile failure in metal forming. In: 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Wisselink, H.H. and Klaseboer, G. and Huetink, H. (2009) Modelling of a burr-free blanking process. International journal of material forming, 2 (Suppl.). pp. 539-542. ISSN 1960-6206

2008

Wisselink, Harm and Huetink, Han (2008) Prediction of the bendability of sheet metals using nonlocal damage models. In: Metal forming 2008, 12th international conference, September 21-24, 2008, Krakow, Polska (pp. pp. 217-224).

2007

Meinders, T. and Burchitz, I. and Bonte, M.H.A. and Lingbeek, R.A. and Perdahcioglu, E.S. and Riel, M. van and Wisselink, H.H. (2007) Trends in Forming Simulation and Optimization of Sheet Metal Products. In: ASME Applied Mechanics and Materials Conference, McMat 2007, June 3-7, 2007, University of Texas, Austin.

Meinders, T. and Perdahcioglu, E.S. and Riel, M. van and Wisselink, H.H. (2007) Numerical modeling of advanced materials. International Journal of Machine Tools and Manufacture, 48 (5). pp. 485-498. ISSN 0890-6955

Wisselink, H.H. (2007) Forming the limits of damage predictions : from fundamentals to application WP4 [poster]. In: NIMR Congress, December 10-11, 2007, Noordwijkerhout, The Netherlands.

Wisselink, H.H. and Huetink, J. (2007) Application of nonlocal damage models to sheet forming applications. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 521-524).

2006

Wisselink, H.H. (2006) Forming the limits of damage predictions: from fundamentals to application WP4. In: NIMR Congress, December, 11-12, 2006, Noordwijkerhout, The Netherlands.

2005

Boogaard, A.H. van den and Wisselink, H.H. and Huetink, J. (2005) Do Advanced Material Models Contribute to Accuracy in Industrial Sheet Forming Simulations? Advanced Materials Research, 6-8 . pp. 71-80. ISSN 1662-8985

Pulnikov, A. and Decocker, R. and Permiakov, V. and Dupre, L. and Vandevelde, L. and Petrov, R. and Melkebeek, J. and Houbaert, Y. and Gyselinck, J. and Wisselink, H. (2005) The relation between the magnetostriction and the hysteresis losses in the non-oriented electrical steels. Journal of Magnetism and Magnetic Materials, 290-29 (Part 2). pp. 1454-1456. ISSN 0304-8853

Wisselink, H.H. (2005) Forming the limits of damage predictions: from fundamentals to application WP4 [poster]. In: NIMR Congress, December, 12-13, 2005, Noordwijkerhout, The Netherlands.

Wisselink, H.H. and Boogaard, A.H. van den (2005) Finite Element Simulation of the Stretch-Forming of Aircraft Skins. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

2004

Pulnikov, A. and Permiakov, V. and Petrov, R. and Gyselinck, J. and Langelaan, G. and Wisselink, H. and Dupre, L. and Houbaert, Y. and Melkebeek, J. (2004) Investigation of residual stresses by means of local magnetic measurement. Journal of Magnetism and Magnetic Materials, 272-27 (3). pp. 2303-2304. ISSN 0304-8853

Wisselink, H.H. (2004) Load transfer in bolt joints of coated parts [poster]. In: NIMR 2004, 2004.

Wisselink, H.H. and Huetink, J. (2004) FEM simulation of multi step forming of thick sheet. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 899-904).

Wisselink, H.H. and Huetink, J. (2004) 3D FEM simulation of stationary metal forming processes with applications to slitting and rolling. Journal of Materials Processing Technology, 148 (3). pp. 328-341. ISSN 0924-0136

2003

Wisselink, H.H. (2003) FEM simulation of multi-step plate forming [poster]. In: 5th Congress of the Netherlands Institute for Metals Research, NIMR 2003, December 8-9, 2003, Noordwijkerhout, The Netherlands.

Wisselink, H.H. and Huetink, J. (2003) 3D FEM Simulation of shape rolling using an ALE method. In: VII International Conference on Computational Plasticity, COMPLAS 2003, April 7-10, 2003, Barcelona, Spain.

2002

Wisselink, H.H. (2002) FEM Simulation of the forming of parts from thick sheet [poster]. In: 4th Congress of the Netherlands Institute for Metals Research, NIMR 2002, December 16-17, 2002, Noordwijkerhout, The Netherlands.

Wisselink, H.H. and Huetink, J. (2002) 3D FEM simulations of the rolling of stator vanes, including tool deformation. In: 7th International Conference on Technology of Plasticity, ICTP 2002, 27 Oct. - 1 Nov. 2002, Yokohama, Japan.

Wisselink, H.H. and Huetink, J. (2002) Tool deformation during the shape rolling of stator vanes. In: fifth ESAFORM conference on Material Forming, April 14-17, 2002, Krakow, Poland.

2001

Wisselink, H.H. (2001) Simulation of the stretch-forming process with the Finite Element Method. [Report]

Wisselink, H.H. (2001) FEM Simulation of the stretch-forming of aircraft skins [poster]. In: 3rd Congress of the Netherlands Institute for Metals Research, NIMR 2001, December 10-11, 2001, Noordwijkerhout, The Netherlands.

Wisselink, H.H. and Huetink, J. and Dijk, M.H.H. van and Leeuwen, A.J. van (2001) 3D FEM Simulations of a shape rolling process. In: fourth ESAFORM conference on Material Forming, April 23-25, 2001, Liège, Belgium.

2000

Wisselink, H.H. (2000) ALE simulations of 3D flow problems with moving free surfaces using DIEKA. [Report]

Wisselink, Harm (2000) FEM Simulation of the rolling of stator vanes [poster]. In: Second Congress of the Netherlands Institute for Metals Research, NIMR 2000: “Building Bridges In Metallurgy”, 13-14 December 2000, Noordwijkerhout, The Netherlands.

Wisselink, Hendrik Herman (2000) Analysis of guillotining and slitting, finite element simulations. thesis.

1999

Wisselink, H.H. and Huetink, J. (1999) Finite element model of the guillotining process. In: second ESAFORM conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

Wisselink, Harm (1999) Simulaties van knippen en slitten [poster]. In: , 1999, Papendal.

Wisselink, H.H. and Huetink, J. (1999) Simulation of the slitting process with the finite element method. In: International Conference on Sheet Metal, SheMet, 27-28 September 1999, Friedrich-Alexander-University Erlangen-Nuremberg (pp. pp. 143-152).

1998

Moesdijk, R.D. van de and Wisselink, H.H. and Boogaard, A.H. van den and Huetink, J. and Bolt, P.J. and Sillekens, W.H. (1998) Blanking by means of the finite element method. In: IACM Conference, 1998.

Wisselink, H.H. and Huetink, J. (1998) Simulation of stationary sheet metal cutting processes. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Wisselink, H.H. and Huetink, J. (1998) 3-D modelling of sheet metal shearing. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Wisselink, Hendrik Herman (1998) FE analysis of sheet metal cutting : poster. In: , 1998.

This list was generated on Wed Oct 1 05:22:12 2014 CEST.