Author Publications

2013

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composite. In: SAMPE Benelux student meeting: book of abstracts, 14-15 January 2012, Namur, Belgium.

Cornelissen, B. and Rietman, A.D. and Akkerman, R. (2013) Frictional behaviour of high performance fibrous tows: Friction experiments. Composites Part A, Applied science and manufacturing, 44 . 95 - 104. ISSN 1359-835X

2012

Akkerman, R. and Rietman, A.D. and Haanappel, S.P. and Sachs, U. (2012) Towards Design for Thermoplastic Composites Manufacturing Using Process Simulation. In: ITHEC 2012, International Conference and Exhibition on Thermoplastic Composites, 29-30 October 2012, Bremen, Germany.

Cornelissen, B. and Rietman, A.D. and Rooij de, M.B. and Akkerman, R. (2012) Tow mechanics: a contact mechanics approach of friction in fibrous tows during forming. Key engineering materials, 504-506 . 325 - 330. ISSN 1013-9826

Cornelissen, B. and Rietman, A.D. and Rooij de, M.B. and Akkerman, R. (2012) Tow Mechanics: a contact mechanics approach of friction in fibrous tows during forming. In: ESAFORM 2012, Erlangen, Germany.

Grouve, W.J.B. and Warnet, L. and Rietman, A.D. and Akkerman, R. (2012) On the weld strength of in situ tape placed reinforcements on weave reinforced structures. Composites Part A, Applied science and manufacturing, 43 (9). 1530 - 1536. ISSN 1359-835X

Haanappel, S.P. and Rietman, B. and Akkerman, R. (2012) Shear characterisation of UD thermoplastic composites. In: 11th International Conference on Flow Processing in Composite Materials, FPCM 2012, 9-12 July 2012, Auckland, New Zealand.

Haanappel, S.P. and Sachs, U. and Thije ten, R.H.W. and Rietman, A.D. and Akkerman, R. (2012) Forming of Thermoplastic Composites. Key engineering materials, 504-506 . 237 - 242. ISSN 1013-9826

Haanappel, S.P. and Sachs, U. and Thije ten, R.H.W. and Rietman, A.D. and Akkerman, R. (2012) Shear Characterisation of UD Thermoplastic Composites. In: 11th International Conference on Flow Processing in Composite Materials (FPCM-11), Auckland, New Zealand.

Ilin, K. and Warnet, L. and Rietman, A.D. and Akkerman, R. and Thije ten, R.H.W. (2012) Failure Modeling of Thermoplastic Butt-Joint Stiffened Panels by Quasi-Static Loading. In: SIMULIA Community Conference, SCC, 15-17 May 2012, Providence RI, USA.

Rietman, A.D. and Haanappel, S.P. and Thije ten, R.H.W. and Akkerman, R. (2012) Forming simulation sensitivity study of the double-dome benchmark geometry. Key engineering materials, 504-506 . 301 - 306. ISSN 1013-9826

2011

Haanappel, S.P. and Thije ten, R. and Sachs, U. and Rietman, A.D. and Akkerman, R. (2011) In-Plane Shear Characterisation of Uni-Directionally Reinforced Thermoplastic Melts. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Rietman, B. and Sachs, U. and Haanappel, S.P. and Akkerman, R. (2011) Complex stamp forming of advanced thermoplastic composites. In: ECCOMAS 2011.

Rietman, Bert and Haanappel, Sebastiaan and Sachs, Ulrich and Akkerman, Remko (2011) Process simulations for composites forming of UD tape laminate. In: 5th International CFK-Valley Stade Convention, 7-8 June 2011, Stade.

Sachs, Ulrich and Haanappel, Sebastiaan and Rietman, Bert and Akkerman, Remko (2011) Friction testing of thermoplastic composites. In: SEICO 11 – Paris: SAMPE Europe's 32nd International Technical Conference and Forum, 28-29 March 2011, Paris.

2008

Lingbeek, R.A. and Meinders, T. and Rietman, A. (2008) Tool And Blank Interaction In The Cross-Die Forming Process. International Journal of Material Forming, 1 (Suppl.). pp. 161-164. ISSN 1960-6206

Pieters, R.R.G.M. and Goos, C. and Rietman, B. and Richardson, I.M. (2008) Zinc transport phenomena in laser welding of coated sheet steel in overlap configuration. Welding in the World, 52 (7-8). pp. 33-41. ISSN 0043-2288

2007

Tikhomirov, Dmitrij and Rietman, Bert and Schwenk, Christopher and Franz, Thomas (2007) Methoden der Schweißverzugssimulation für die Anwendung in der Automobilindustrie. Schweissen und Schneiden, 59 (12). pp. 678-680. ISSN 0036-7184

2005

Kose, K. and Rietman, B. and Tikhomirov, D. and Bessert, N. (2005) Approaching a reliable process simulation for the virtual product development. In: 146 ICTP.

Ohnimus, S. and Petzoldt, M. and Rietman, B. and Weiher, J. (2005) Compensating springback in the automotive practice
using MASHAL. In: Numisheet2005, 6th international conference and workshop on numerical simulation of 3D sheet forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Tikhomirov, D. and Rietman, B. and Kose, K. and Makkink, M. (2005) Computing Welding Distortion: Comparison of Different Industrially
Applicable Methods. In: SHEMET 2005, The 11th International Conference on Sheet Metal, April 5 - 8 2005, Friedrich-Alexander University Erlangen-Nuremberg. .

Tikhomirov, D. and Rietman, B. and Kose, K. and Makkink, M. (2005) Computing Welding Distortion: Comparison of Different Industrially
Applicable Methods. Advanced Materials Research, 6-8 . pp. 195-202. ISSN 1662-8985

2004

Burchitz, I. and Meinders, T. and Atzema, E.H. and Kappert, H. and Konter, A.W.A. and Meijers, S.E. and Rietman, A.D. (2004) Improving numerical predictability of Springback [poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Kose, K. and Rietman, B. (2004) Combining forming results via weld models to powerful numerical
assemblies. In: seventh ESAFORM conference on Material Forming , April 2004, Trondheim, Norway.

Rietman, Bert and Kose, Kim and Ohnimus, Stephan and Petzoldt, Martin and Weiher, Jochen (2004) Recent advances in industrially applied numerically aided springback compensation. In: The IDDRG 2004 Conference , Sindelfingen, Germany.

Rietman, Bert and Kose, Kim and Tikhomirov, Dmitrij (2004) Mechanische Schweißersatzmodelle für gekoppelte Simulationen. In: Fügetechnik im Leichtbau, 16-17 March 2004, Stuttgart.

Weiher, Jochen and Rietman, Bert and Kose, Kim and Ohnimus, Stephan and Petzoldt, Martin (2004) Controlling Springback With Compensation Strategies. AIP Conference Proceedings, 712 . pp. 1011-1015. ISSN 0094-243X

2003

Kose, Kim and Rietman, Bert (2003) Plasticity effects in subsequent simulations of car structures. In: Complas 2003, VII international conference on computational plasticity, 7-10 April 2003, Barcelona.

2002

Rietman, B. and Kose, K. (2002) The role of plasticity in the integrated approach of subsequent
simulations of car structures. In: UNSPECIFIED.

2001

Rietman, Bert and Goretti Doig, Maria and Weiher, Jochen (2001) Predicting the quality of clinch joints using FEM. In: 4th ESAFORM Conference on Material Forming 2001, April 23-25, 2001, Liège, Belgium.

1999

Huetink, J. and Boogaard van den, A.H. and Rietman, A.D. and Lof, J. and Meinders, T. (1999) A mixed elastoplastic/rigid-plastic material model. International Journal for Numerical Methods in Engineering, 46 (9). pp. 1421-1434. ISSN 0029-5981

Rietman, Albert Dirk (1999) Numerical analysis of inhomogeneous deformation in plane strain compression. thesis.

1998

Boogaard van den, A.H. and Rietman, A.D. and Huetink, J. (1998) Iterative solvers in forming process simulations. In: 6th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede, the Netherlands.

Huetink, J. and Boogaard van den, A.H. and Rietman, A.D. and Lof, J. and Meinders, T. (1998) A mixed elastoplastic / rigid-plastic material model. In: Fourth World Congress on Computational Mechanics, WCCM IV, 29 June - 2 July 1998, Buenos Aires, Argentina.

Rietman, Bert (1998) Finite Elements for Better Understanding of Compression Tests. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

1997

Rietman, A.D. and Liempt van, P. and Huetink, H. (1997) The modeling of compression tests with a physically based material model using finite elements. In: Fifth International Conference on Computational Plasticity, 17-20 March 1997, Barcelona, Spain.