Author Publications

2013

Shirazi, S. and Rooij de, M.B. and Talma, A.G. and Noordermeer, J.W.M. (2013) Adhesion of RFL-coated aramid fibres to elastomers: the role of elastomer-latex compatibility. Journal of adhesion science and technology . ISSN 0169-4243

2012

Bakker den, A.J. and Ma, X. and Werkhoven, R.W. and Rooij de, M.B. (2012) Surface Pick-up Formation: New Limits In The Limit Diagram. In: ET '12, Miami, Florida, USA.

Cornelissen, B. and Rietman, A.D. and Rooij de, M.B. and Akkerman, R. (2012) Tow mechanics: a contact mechanics approach of friction in fibrous tows during forming. Key engineering materials, 504-506 . 325 - 330. ISSN 1013-9826

Cornelissen, B. and Rietman, A.D. and Rooij de, M.B. and Akkerman, R. (2012) Tow Mechanics: a contact mechanics approach of friction in fibrous tows during forming. In: ESAFORM 2012, Erlangen, Germany.

Hol, J. and Cid Alfaro, M.V. and Rooij de, M.B. and Meinders, V.T. (2012) Advanced friction modeling for sheet metal forming. Wear, 286-287 . 66 - 78. ISSN 0043-1648

Karupannasamy, D.K. and Hol, J. and Rooij de, M.B. and Meinders, V.T. and Schipper, D.J. (2012) Modeling mixed lubrication for deep drawing processes. Wear, 294-295 . 296 - 304. ISSN 0043-1648

Karupannasamy, D.K. and Rooij de, M.B. and Schipper, D.J. (2012) Multi-scale contact model for rough contacts. In: Nordtrib 2012, 12-15 June 2012, Trondheim, Norway.

Ma, X. and Rooij de, M.B. and Schipper, D.J. (2012) Friction conditions in the bearing area of an aluminium extrusion process. Wear, 278-279 . 1 - 8. ISSN 0043-1648

Rooij de, M.B. and Ma, X. and Bakker den, A.J. and Werkhoven, R.J. (2012) Surface quality prediction in aluminum extrusion. Key engineering materials, 491 . 27 - 34. ISSN 1013-9826

Song, J. and Valefi, M. and Rooij de, M.B. and Schipper, D.J. and Winnubst, A.J.A. (2012) The effect of an alumina counterface on friction reduction of CuO/3Y-TZP composite at room temperature. Wear, 274-275 . 75 - 83. ISSN 0043-1648

Valefi, M. and Pathiraj, B. and Rooij de, M.B. and Vries de, E.G. and Schipper, D.J. (2012) Influence of countersurface materials on dry sliding performance of CuO/Y-TZP composite at 600 °C. Journal of the European Ceramic Society, 32 (16). 4137 - 4147. ISSN 0955-2219

Valefi, M. and Pathiraj, B. and Rooij de, M.B. and Vries de, E.G. and Schipper, D.J. (2012) Influence of countersurface materials on dry sliding performance of CuO/Y-TZP composite at 600oC. Journal of the European Ceramic Society, 32 . 4137 - 4147. ISSN 0955-2219

Valefi, M. and Rooij de, M.B. and Schipper, D.J. and Winnubst, A.J.A. (2012) Effect of temperature on friction and wear behavior of CuO-zirconia composites. Journal of the European Ceramic Society, 32 (10). 2235 - 2242. ISSN 0955-2219

Yaqoob, M.A. and Rooij de, M.B. and Schipper, D.J. (2012) Design of temperature on friction and wear behaviour of CuO-zirconia composites. WIT transactions on the built environment, 124 . 261 - 274. ISSN 1743-3509

2011

Sachs, U. and Akkerman, R. and Thije ten, R. and Rooij de, M. (2011) Friction in Forming of UD Composites. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

Valefi, Mahdiar and Rooij de, Matthijn and Schipper, Dirk J. and Winnubst, Louis (2011) High-Temperature Tribological and Self-Lubricating Behavior of Copper Oxide-Doped Y-TZP Composite Sliding Against Alumina. Journal of the American Ceramic Society, 94 (12). pp. 4426-4434. ISSN 0002-7820

2010

Akkerman, R. and Thije ten, R. and Sachs, U. and Rooij de, M.B. (2010) Friction in Textile Thermoplastic Composites Forming. In: 10th International Conference on Textile Composites, TEXCOMP 10, 2010, October 25-29, 2010, Lille, France.

Bosman, R. and Rooij de, M.B. (2010) Transient Thermal Effects and Heat Partition in Sliding Contacts. Journal of Tribology, 132 (2). 021401. ISSN 0742-4787

Hol, J. and Cid Alfaro, M.V. and Rooij de, M.B. and Meinders, V.T. (2010) Multiscale friction modeling for sheet metal forming. In: International Conference on Tribology in Manufacturing Processes, ICTMP 2010, June 13-15, 2010, Nice, France.

Ma, X. and Rooij de, M.B. and Schipper, D.J. (2010) Modelling of contact and friction in aluminium extrusion. Tribology International, 43 (5-6). pp. 1138-1144. ISSN 0301-679X

Song, Jiupeng and Valefi, Mahdiar and Rooij de, Matthijn and Schipper, Dirk J. (2010) A mechanical model for surface layer formation on self-lubricating ceramic composites. Wear, 268 (9-10). pp. 1072-1079. ISSN 0043-1648

2007

Deladi, E.L. and Rooij de, M.B. and Schipper, D.J. (2007) Modelling of static friction in rubber–metal contact. Tribology International, 40 (4). pp. 588-594. ISSN 0301-679X

Jamari, J. and Rooij de, M.B. and Schipper, D.J. (2007) Plastic Deterministic Contact of Rough Surfaces. Journal of Tribology, 129 (4). pp. 957-962. ISSN 0742-4787

Masen, M.A. and Rooij de, M.B. and Schipper, D.J. and Adachi, K. and Kato, K. (2007) Single asperity abrasion of coated nodular cast iron. Tribology International, 40 (2). pp. 170-179. ISSN 0301-679X

Moodij, E. and Rooij de, M.B. and Schipper, D.J. (2007) Contact model for hydrostatic extrusion of magnesium. In: International Conference on Tribology in Manufacturing Processes, ICTMP 2007, 24-26 September 2007, Yokohama, Japan.

Tasan, Y.C. and Rooij de, M.B. and Schipper, D.J. (2007) Changes in the micro-geometry of a rolling contact. Tribology International, 40 (4). pp. 672-679. ISSN 0301-679X

2006

Deladi, E.L. and Rooij de, M.B. and Vries de, E.G and Schipper, D.J. (2006) Analytical and experimental investigation of the static friction regime for rubber-rigid ball contact. Surface and Interface Analysis, 38 (4). pp. 891-893. ISSN 0142-2421

Moodij, E. and Rooij de, M.B. and Schipper, D.J. (2006) Hydrodynamic modelling of hydrostatic magnesium extrusion. In: International Tribology Conference, AUSTRIB, December 3-6, 2006, Rydges South Bank, Brisbane, Australia.

2005

Masen, M.A. and Rooij de, M.B. and Schipper, D.J. (2005) Micro-contact based modelling of abrasive wear. Wear, 258 (1-4). pp. 339-348. ISSN 0043-1648

Tasan, Y.C. and Rooij de, M.B. and Schipper, D.J. (2005) Measurement of wear on asperity level using image-processing techniques. Wear, 258 (1-4). pp. 83-91. ISSN 0043-1648

2004

Garcia, Monserrat and Rooij de, Matthijn and Winnubst, Louis and Zyl van, Werner E. and Verweij, Henk (2004) Friction and wear studies on nylon-6/SiO2 nanocomposites. Journal of Applied Polymer Science, 92 (3). pp. 1855-1862. ISSN 0021-8995

Masen, M.A. and Rooij de, M.B. (2004) Abrasive wear between rough surfaces in deep drawing. Wear, 256 (6). pp. 639-646. ISSN 0043-1648

2002

Masen, M.A. and Rooij de, M.B. (2002) Abrasive Wear between Rough Surfaces in Deep Drawing. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

2001

Rooij de, M.B. and Schipper, D.J. (2001) Analysis of Material Transfer From a Soft Workpiece to a Hard Tool: Part I-Lump Growth Model. Journal of Tribology, 123 (3). pp. 469-473. ISSN 0742-4787

Rooij de, M.B. and Schipper, D.J. (2001) Analysis of Material Transfer From a Soft Workpiece to a Hard Tool: Part II-Experimental Verification of the Proposed Lump Growth Model. Journal of Tribology, 123 (3). pp. 474-478. ISSN 0742-4787

1998

Rooij de, M.B. and Schipper, D.J. (1998) A wear measurement method based on the comparison of local surface heights. Wear, 217 (2). pp. 182-189. ISSN 0043-1648

1995

Visscher, H. and Rooij de, M.B. and Vroegop, P.H. and Schipper, D.J. (1995) The influence of laser line hardening of carbon steel AISI 1045 on the lubricated wear against steel AISI 52100. Wear, 181-18 (part 2). pp. 638-647. ISSN 0043-1648