Author Publications

2013

Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2013) Characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composite. In: SAMPE Benelux student meeting: book of abstracts, 14-15 January 2012, Namur, Belgium.

Palacios-Aguilera, N.B. and Visser, H.A. and Sridhar, A. and Balda-Irurzun, U. and Vargas-Llona, L.D. and Zhou, Jiang and Akkerman, R. and French, P.J. and Bossche, A. (2013) Reliable Inkjet-Printed Interconnections on Foil-Type Li-Ion Batteries. IEEE transactions on device and materials reliability, 13 (1). pp. 136-145. ISSN 1530-4388

Visser, H.A. and Caimmi, F. and Pavan, A. (2013) Characterising the fracture toughness of polymers at moderately high rates of loading with the use of instrumented tensile impact testing. Engineering fracture mechanics, 101 . 67 - 79. ISSN 0013-7944

2012

Drenth, E. and Bor, T.C. and Visser, H.A. and Wolters, M. (2012) Influence of the Level of Gelation on Physical Ageing Kinetics of uPVC Pipes. In: 15th International Conference on Deformation, Yield and Fracture of Polymers, 1-5 April 2012, Kerkrade, the Netherlands.

Drenth, E. and Bor, T.C. and Visser, H.A. and Wolters, M. (2012) Non-destructive and in-situ determination of the degree of gelation of pvc pipes. In: Plastic pipes XVI, 24-26 September 2012, Barcelona, Spain.

Palacios-Aguilera, N.B. and Bastemeijer, J. and Mollinger, J.R. and Bossche, A. and Mokkapati, V.R.S.S. and Visser, H.A. and Akkerman, R. (2012) Low-cost technology for the integration of micro- and nanochips into fluidic systems on printed circuit board: fabrication challenges. International journal on advances in systems and measurements, 5 (1-2). 11 - 21. ISSN 1942-261X

Palacios-Aguilera, N.B. and Visser, H.A. and Vargas-Llona, L.D. and Balda-Irurzun, U. and Sridhar, A. and Akkerman, R. and Bossche, A. (2012) Performance of inkjet-printed structures on different substrate materials under high humidity and elevated temperature conditions. In: 4th Electronic System-Integration Technology Conference (ESTC), 17-20 September 2012, Amsterdam.

Petcu, I. and Agrawal, P.B. and Curteza, A. and Visser, H.A. and Brinks, G. and Teodorescu, M. (2012) A comparative study of heating elements used for the development of textile heaters. In: 12th AUTEX World Textile Conference, 13-15 June 2012, Zadar, Croatia.

2011

Visser, H.A. and Balda Irurzun, U. and Akkerman, R. and Sridhar, A. (2011) Fabrication and mechanical characterisation of inkjet printed strain gauges. In: LOPE-C 2011. OE-A, pp. 349-351. ISBN 9783000349577

Visser, H.A. and Bor, T.C. and Wolters, M. and Warnet, L.L. and Govaert, L.E. (2011) Influence of physical aging on impact embrittlement of uPVC pipes. Plastics, Rubber and Composites, 40 (5). pp. 201-212. ISSN 1465-8011

2010

Visser, Hendrikus A. and Bor, Ton C. and Wolters, Mannes and Engels, Tom A.P. and Govaert, Leon E. (2010) Lifetime Assessment of Load-Bearing Polymer Glasses: An Analytical Framework for Ductile Failure. Macromolecular Materials and Engineering, 295 (7). pp. 637-651. ISSN 1438-7492

Visser, Hendrikus A. and Bor, Ton C. and Wolters, Mannes and Wismans, Joris G.F. and Govaert, Leon E. (2010) Lifetime Assessment of Load-Bearing Polymer Glasses: The Influence of Physical Ageing. Macromolecular Materials and Engineering, 295 (12). pp. 1066-1081. ISSN 1438-7492

Visser, Hendrikus Antonius (2010) Residual lifetime assessment of UPVC gas pipes. thesis.

2009

Visser, H.A. and Warnet, L.L. and Akkerman, R. (2009) An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipes. Engineering Fracture Mechanics, 76 (18). pp. 2698-2710. ISSN 0013-7944

Visser, Roy and Bor, Ton and Wolters, Mannes and Govaert, Leon E. (2009) The influence of physical ageing on yielding and failure of unplasticised poly(vinyl chloride) pipes. In: 14th International Conference on Deformation Yield and Fracture of Polymers, 6-9 April 2009, Rolduc, Kerkrade.

2008

Hermkens, Rene and Wolters, Mannes and Weller, Jeroen and Visser, Roy (2008) PVC pipes in gas distribution: still going strong! In: Plastic Pipes XIV, 22-24 September 2008, Budapest, Hungary.

Visser, H.A. and Hermkens, R.M.J. and Wolters, M. and Weller, J. and Warnet, L.L. (2008) Excellent impact performance of PVC pipeline materials in gas distribution networks after many years of service. In: International Gas Union Research Conference, IGCR, 8-10 October 2008, Paris, France.

Visser, H.A. and Wolters, M. and Bor, T.C. and Engels, T.A.P. and Govaert, L.E. (2008) A new engineering approach to predict the long-term hydrostatic strength of unplasticized poly(vinyl chloride) pipes. In: 10th International PVC Conference, 22-24 April 2008, Brighton, UK.

2007

Visser, H.A. and Engels, T.A.P. and Govaert, L.E. and Bor, T.C. (2007) A new engineering approach to predict the hydrostatic strength of uPVC
pipes. In: PPS E/A, 2007, Göteborg, Sweden.