Author Publications

Article

Altpeter, H. and Bevis, M.J. and Grijpma, D.W. and Feijen, J. (2004) Non-conventional injection molding of poly(lactide) and poly(ε-caprolactone) intended for orthopedic applications. Journal of materials science. Materials in medicine, 15 (2). pp. 175-184. ISSN 0957-4530

Azevedo, M.C. and Reis, R.L. and Claase, M.B. and Grijpma, D.W. and Feijen, J. (2003) Development and properties of polycaprolactone/hydroxyapatite composite biomaterials. Journal of materials science. Materials in medicine, 14 (2). pp. 103-107. ISSN 0957-4530

Basalus, M.W. and Tandjung, K. and Westen van, T. and Sen, H. and Jagt van der, P.K.N. and Grijpma, D.W. and Apeldoorn van, A.A. and Birgelen von, C. (2012) Scanning electron microscopic assessment of coating irregularities and their precursors in unexpanded durable polymer-based drug-eluting stents. Catheterization and cardiovascular interventions, 79 (4). 644 - 653. ISSN 1522-1946

Basalus, M.Z. and Tandjung, K. and Sen, H. and Apeldoorn van, A.A. and Grijpma, D.W. and Birgelen von, C. (2012) Recent insights from scanning electron microscopic assessment of durable polymer-coated drug-eluting stents. Interventional cardiology, 4 . 661 - 674. ISSN 1755-5302

Bat, E. and Grijpma, D.W. and Feijen, J. (2008) Thermoreversible gelation behaviour of PTMC-PEG-PTMC triblock copolymers. Journal of Controlled Release, 132 (3). e37-e39. ISSN 0168-3659

Bat, Erhan and Feijen, Jan and Grijpma, Dirk W. (2010) Biodegradable Elastomeric Networks: Highly Efficient Cross-Linking of Poly(trimethylene carbonate) by Gamma Irradiation in the Presence of Pentaerythritol Triacrylate. Biomacromolecules, 11 (10). pp. 2692-2699. ISSN 1525-7797

Bat, Erhan and Kooten van, Theo G. and Feijen, Jan and Grijpma, Dirk W. (2009) Macrophage-mediated erosion of gamma irradiated poly(trimethylene carbonate) films. Biomaterials, 30 (22). pp. 3652-3661. ISSN 0142-9612

Bat, Erhan and Kothman, Bas H.M. and Higuera Sierra, Gustavo Andrés and Blitterswijk van, Clemens A. and Feijen, Jan and Grijpma, Dirk W. (2010) Ultraviolet light crosslinking of poly(trimethylene carbonate) for elastomeric tissue engineering scaffolds. Biomaterials, 31 (33). pp. 8696-8705. ISSN 0142-9612

Bat, Erhan and Plantinga, Josée A. and Harmsen, Martin C. and Luyn van, Marja J.A. and Zhang, Zheng and Grijpma, Dirk W. and Feijen, Jan (2008) Trimethylene Carbonate and -Caprolactone Based (co)Polymer Networks: Mechanical Properties and Enzymatic Degradation. Biomacromolecules, 9 (11). pp. 3208-3215. ISSN 1525-7797

Bezemer, J.M. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (1999) A controlled release system for proteins based on poly(ether ester) block-copolymers: polymer network characterization. Journal of Controlled Release, 62 (3). pp. 393-405. ISSN 0168-3659

Bezemer, J.M. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (2000) Control of protein delivery from amphiphilic poly(ether ester) multiblock copolymers by varying their water content using emulsification techniques. Journal of Controlled Release, 66 (2-3). pp. 307-320. ISSN 0168-3659

Bezemer, J.M. and Oude Weme, P. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (2000) Amphiphilic poly(ether ester amide) multiblock copolymers as biodegradable matrices for the controlled release of proteins. Journal of Biomedical Materials Research, 52 (1). pp. 8-17. ISSN 1549-3296

Bezemer, J.M. and Radersma, R. and Grijpma, D.W. and Dijkstra, P.J. and Feijen, J. and Blitterswijk van, C.A. (2000) Zero-order release of lysozyme from poly(ethylene glycol)/poly(butylene terephthalate) matrices. Journal of Controlled Release, 64 (1-3). pp. 179-192. ISSN 0168-3659

Bezemer, J.M. and Radersma van, R. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (2000) Microspheres for protein delivery prepared from amphiphilic multiblock copolymers: 1. Influence of preparation techniques on particle characteristics and protein delivery. Journal of Controlled Release, 67 (2-3). pp. 233-248. ISSN 0168-3659

Bezemer, J.M. and Radersma van, R. and Grijpma, D.W. and Dijkstra, P.J. and Blitterswijk van, C.A. and Feijen, J. (2000) Microspheres for protein delivery prepared from amphiphilic multiblock copolymers: 2. Modulation of release rate. Journal of Controlled Release, 67 (2-3). pp. 249-260. ISSN 0168-3659

Blanquer, S.B.G. and Sharifi, S. and Grijpma, D.W. (2012) Development of poly(trimethylene carbonate) network implants for annulus fibrosus tissue engineering. Journal of applied biomaterials and functional materials, 10 . 177 - 184. ISSN ISSN 2280-8000

Buttafoco, Laura and Boks, Niels P. and Engbers-Buijtenhuijs, P. and Grijpma, Dirk W. and Poot, André A. and Dijkstra, Piet J. and Vermes, István and Feijen, Jan (2006) Porous hybrid structures based on P(DLLA-co-TMC) and collagen for tissue engineering of small-diameter blood vessels. Journal of Biomedical Materials Research, 79B (2). pp. 425-434. ISSN 0021-9304

Claase, Menno B. and Olde Riekerink, Mark B. and Bruijn de, Joost D. and Grijpma, Dirk W. and Engbers, Gerard H.M. and Feijen, Jan (2003) Enhanced Bone Marrow Stromal Cell Adhesion and Growth on Segmented Poly(ether ester)s Based on Poly(ethylene oxide) and Poly(butylene terephthalate). Biomacromolecules, 4 (1). pp. 57-63. ISSN 1525-7797

Claase, Menno B. and Bruijn de, Joost D. and Grijpma, Dirk W. and Feijen, Jan (2007) Ectopic bone formation in cell-seeded poly(ethylene oxide)/poly(butylene terephthalate) copolymer scaffolds of varying porosity. Journal of Materials Science: Materials in Medicin, 18 (7). pp. 1299-1307. ISSN 0957-4530

Claase, Menno B. and Grijpma, Dirk W. and Mendes, Sandra C. and Bruijn de, Joost D. and Feijen, Jan (2003) Porous PEOT/PBT scaffolds for bone tissue engineering: Preparation, characterization, and in vitro bone marrow cell culturing. Journal of Biomedical Materials Research. Part A, 64A (2). pp. 291-300. ISSN 1549-3296

Dankers, Patricia Y.W. and Zhang, Zheng and Wisse, Eva and Grijpma, Dirk W. and Sijbesma, Rint P. and Feijen, Jan and Meijer, E.W. (2006) Oligo(trimethylene carbonate)-Based Supramolecular Biomaterials. Macromolecules, 39 (25). pp. 8763-8771. ISSN 0024-9297

Deschamps, A.A. and Apeldoorn van, A.A. and Bruijn de, J.D. and Grijpma, D.W. and Feijen, J. (2003) Poly(ether ester amide)s for tissue engineering. Biomaterials, 24 (15). pp. 2643-2652. ISSN 0142-9612

Deschamps, A.A. and Apeldoorn van, A.A. and Hayen, H. and Bruijn de, J.D. and Karst, U. and Grijpma, D.W. and Feijen, J. (2004) In vivo and in vitro degradation of poly(ether ester) block copolymers based on poly(ethylene glycol) and poly(butylene terephthalate). Biomaterials, 25 (2). pp. 247-258. ISSN 0142-9612

Deschamps, Audrey A. and Claase, Menno B. and Sleijster, Warnerie J. and Bruijn de, Joost D. and Grijpma, Dirk W. and Feijen, Jan (2002) Design of segmented poly(ether ester) materials and structures for the tissue engineering of bone. Journal of Controlled Release, 78 (1-3). pp. 175-186. ISSN 0168-3659

Deschamps, Audrey A. and Grijpma, Dirk W. and Feijen, Jan (2001) Poly(ethylene oxide)/poly(butylene terephthalate) segmented block copolymers: the effect of copolymer composition on physical properties and degradation behavior. Polymer, 42 (23). pp. 9335-9345. ISSN 0032-3861

Dijkhuizen-Radersma van, R. and Peters, F.L.A.M.A. and Stienstra, N.A. and Grijpma, D.W. and Feijen, J. and Groot de, K. and Bezemer, J.M. (2002) Control of vitamin B12 release from poly(ethylene glycol)/poly(butylene terephthalate) multiblock copolymers. Biomaterials, 23 (6). pp. 1527-1536. ISSN 0142-9612

Dunnen den, W.F.A. and Meek, M.F. and Grijpma, D.W. and Robinson, P.H. and Schakenraad, J.M. (2000) In vivo and in vitro degradation of poly[50/50 (85/15L/D)LA/ε-CL], and the implications for the use in nerve reconstruction. Journal of Biomedical Materials Research, 51 (4). pp. 575-585. ISSN 1549-3296

Engbers, Gerard and Poot, André and Grijpma, Dirk and Zhong, Zhiyuan and Dijkstra, Piet (2005) Professor Jan Feijen—30 years research in biomedical technology. Journal of Controlled Release, 109 (1-3). pp. 2-4. ISSN 0168-3659

Gottenbos, B. and Mei van der, H.C. and Busscher, H.J. and Grijpma, D.W. and Feijen, J. (1999) Initial adhesion and surface growth of Pseudomonas aeruginosa on negatively and positively charged poly(methacrylates). Journal of materials science. Materials in medicine, 10 (12). pp. 853-855. ISSN 0957-4530

Gottenbos, Bart and Mei van der, Henny C. and Klatter, Flip and Grijpma, Dirk W. and Feijen, Jan and Nieuwenhuis, Paul and Busscher, Henk J. (2003) Positively charged biomaterials exert antimicrobial effects on gram-negative bacilli in rats. Biomaterials, 24 (16). pp. 2707-2710. ISSN 0142-9612

Grijpma, Dirk W. and Altpeter, Hanno and Bevis, Michael J. and Feijen, Jan (2002) Improvement of the mechanical properties of poly(D,L-lactide) by orientation. Polymer International, 51 (10). pp. 845-851. ISSN 0959-8103

Grijpma, D.W. (2012) Composite biomaterials for bone repair and regeneration -reconstruction of orbital floor defects in an animal model. European cells & materials, 24 . 11 - . ISSN 1473-2262

Grijpma, Dirk W. and Hou, Qingpu and Feijen, Jan (2005) Preparation of biodegradable networks by photo-crosslinking lactide, ε-caprolactone and trimethylene carbonate-based oligomers functionalized with fumaric acid monoethyl ester. Biomaterials, 26 (16). pp. 2795-2802. ISSN 0142-9612

Habraken, W.J.E.M. and Liao, H.B. and Zhang, Z. and Wolke, J.G.C. and Grijpma, D.W. and Mikos, A.G. and Feijen, J. and Jansen, J.A. (2010) In vivo degradation of calcium phosphate cement incorporated into biodegradable microspheres. Acta Biomaterialia, 6 (6). pp. 2200-2211. ISSN 1742-7061

Habraken, Wouter J.E.M. and Zhang, Zheng and Wolke, Joop G.C. and Grijpma, Dirk W. and Mikos, Antonios G. and Feijen, Jan and Jansen, John A. (2008) Introduction of enzymatically degradable poly(trimethylene carbonate) microspheres into an injectable calcium phosphate cement. Biomaterials, 29 (16). pp. 2464-2476. ISSN 0142-9612

Hayen, Heiko and Deschamps, Audrey A. and Grijpma, Dirk W. and Feijen, Jan and Karst, Uwe (2004) Liquid chromatographic–mass spectrometric studies on the in vitro degradation of a poly(ether ester) block copolymer. Journal of Chromatography A, 1029 (1-2). pp. 29-36. ISSN 0021-9673

Hou, Qingpu and Grijpma, Dirk W. and Feijen, Jan (2005) Preparation of interconnected highly porous polymeric structures by a replication and freeze-drying process. Journal of Biomedical Materials Research. Part B: Applied biomaterials, 67 (2). pp. 732-740. ISSN 0021-9304

Hou, Qingpu and Grijpma, Dirk W. and Feijen, Jan (2002) Preparation of Porous Poly(ε-caprolactone) Structures. Macromolecular Rapid Communications, 23 (4). pp. 247-252. ISSN 1022-1336

Hou, Qingpu and Grijpma, Dirk W. and Feijen, Jan (2003) Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique. Biomaterials, 24 (11). pp. 1937-1947. ISSN 0142-9612

Hou, Qingpu and Grijpma, Dirk W. and Feijen, Jan (2009) Creep-resistant elastomeric networks prepared by photocrosslinking fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers. Acta Biomaterialia, 5 (5). pp. 1543-1551. ISSN 1742-7061

Jansen, Janine and Boerakker, Mark J. and Heuts, Jean and Feijen, Jan and Grijpma, Dirk W. (2010) Rapid photo-crosslinking of fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers for drug delivery applications. Journal of Controlled Release, 147 (1). pp. 54-61. ISSN 0168-3659

Jansen, Janine and Melchels, Ferry P.W. and Grijpma, Dirk W. and Feijen, Jan (2009) Fumaric Acid Monoethyl Ester-Functionalized Poly(d,l-lactide)/N-vinyl-2-pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography. Biomacromolecules, 10 (2). pp. 214-220. ISSN 1525-7797

Jansen, Janine and Mihov, G. and Feijen, J. and Grijpma, D.W. (2012) Photo-Crosslinked Biodegradable Hydrogels Prepared From Fumaric Acid Monoethyl Ester-Functionalized Oligomers for Protein Delivery. Macromolecular bioscience, 12 (5). 692 - 702. ISSN 1616-5187

Jansen, Janine and Tibbe, M.P. and Mihov, G. and Feijen, J. and Grijpma, D.W. (2012) Photo-crosslinked networks prepared from fumaric acid monoethyl ester-functionalized poly(d,l-lactic acid) oligomers and N-vinyl-2-pyrrolidone for the controlled and sustained release of proteins. Acta biomaterialia, 8 (10). 3652 - 3659. ISSN 1742-7061

Kellomäki, M. and Paasimaa, S. and Grijpma, D.W. and Kolppo, K. and Törmälä, P. (2002) In vitro degradation of Polyactive® 1000PEOT70PBT30 devices. Biomaterials, 23 (1). pp. 283-295. ISSN 0142-9612

Leeuwen van, A.C. and Bos, R.R.M. and Grijpma, D.W. (2012) Composite materials based on poly(trimethylene carbonate) and β-tricalcium phosphate for orbital floor and wall reconstruction. Journal of biomedical materials research - Part B: applied biomaterials, 100B . 1610 - 1620. ISSN 1552-4973

Leeuwen van, A.C. and Huddelston Slater, J.J.R. and Gielkens, P.F.M. and Jong de, J.R. and Grijpma, D.W. and Bos, R.R.M. (2012) Guided bone regeneration in rat mandibular defects using resorbable poly(trimethylene carbonate) barrier membranes. Acta biomaterialia, 8 (4). 1422 - 1429. ISSN 1742-7061

Leeuwen van, A.C. and Kooten van, T.G. and Grijpma, D.W. and Bos, R.R.M. (2012) In vivo behaviour of a biodegradable poly (trimethylene carbonate) barrier membrane: A histological study in rats. Journal of materials science. Materials in medicine, 23 (8). 1951 - 1959. ISSN 0957-4530

Leeuwen van, A.C. and Ong, S.H. and Vissink, A. and Grijpma, D.W. and Bos, R.R.M. (2012) Reconstruction of orbital wall defects: Recommendations based on a mathematical model. Experimental eye research, 97 (1). 10 - 18. ISSN 0014-4835

Leeuwen van, Suze M. and Tan, BoonHua and Grijpma, Dirk W. and Feijen, J. and Karst, Uwe (2007) Characterization of the chemical composition of a block copolymer by liquid chromatography/mass spectrometry using atmospheric pressure chemical ionization and electrospray ionization. Rapid Communications in Mass Spectrometry, 21 (16). pp. 2629-2637. ISSN 0951-4198

Lendlein, A. and Pierce, B. and Ambrosio, L. and Grijpma, D.W. (2012) Advanced functional polymers for medicine: Multifunctional biomaterials. Acta biomaterialia, 8 (12). 4199 - 4199. ISSN 1742-7061

Liao, Hongbing and Walboomers, X. Frank and Habraken, Wouter J.E.M. and Zhang, Zheng and Li, Yubao and Grijpma, Dirk W. and Mikos, Antonios G. and Wolke, Joop G.C. and Jansen, John A. (2011) Injectable calcium phosphate cement with PLGA, gelatin and PTMC microspheres in a rabbit femoral defect. Acta Biomaterialia, 7 (4). pp. 1752-1759. ISSN 1742-7061

Melchels, F.P.W. and Grijpma, D.W. and Feijen, J. (2008) Properties of porous structures prepared by stereolithography using a polylactide resin. Journal of Controlled Release, 132 (3). e71-e73. ISSN 0168-3659

Melchels, F.P.W. and Grijpma, D.W. and Feijen, J. (2006) Photo-crosslinking of functionalised lactide oligomers for the fabrication of osteochondral tissue engineering scaffolds. Journal of Controlled Release, 116 (2). e98-e100. ISSN 0168-3659

Melchels, Ferry P.W. and Barradas, Ana M.C. and Blitterswijk van, Clemens A. and Boer de, Jan and Feijen, Jan and Grijpma, Dirk W. (2010) Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing. Acta Biomaterialia, 6 (11). pp. 4208-4217. ISSN 1742-7061

Melchels, Ferry P.W. and Bertoldi, Katia and Gabbrielli, Ruggero and Velders, Aldrik H. and Feijen, Jan and Grijpma, Dirk W. (2010) Mathematically defined tissue engineering scaffold architectures prepared by stereolithography. Biomaterials, 31 (27). pp. 6909-6916. ISSN 0142-9612

Melchels, Ferry P.W. and Feijen, Jan and Grijpma, Dirk W. (2010) A review on stereolithography and its applications in biomedical engineering. Biomaterials, 31 (24). pp. 6121-6130. ISSN 0142-9612

Melchels, Ferry P.W. and Feijen, Jan and Grijpma, Dirk W. (2009) A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography. Biomaterials, 30 (23-24). pp. 3801-3809. ISSN 0142-9612

Melchels, Ferry P.W. and Feijen, Jan and Grijpma, Dirk W. (2009) A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography. Biomaterials, 30 (23-24). pp. 3801-3809. ISSN 0142-9612

Melchels, Ferry P.W. and Tonnarelli, Beatrice and Olivares, Andy L. and Martin, Ivan and Lacroix, Damien and Feijen, Jan and Wendt, David J. and Grijpma, Dirk W. (2011) The influence of the scaffold design on the distribution of adhering cells after perfusion cell seeding. Biomaterials, 32 (11). pp. 2878-2884. ISSN 0142-9612

Melchels, Ferry P.W. and Velders, Aldrik H. and Feijen, Jan and Grijpma, Dirk W. (2010) Photo-Cross-Linked Poly(dl-lactide)-Based Networks. Structural Characterization by HR-MAS NMR Spectroscopy and Hydrolytic Degradation Behavior. Macromolecules, 43 (20). pp. 8570-8579. ISSN 0024-9297

Mendes, S.C. and Bezemer, J. and Claase, M.B. and Grijpma, D.W. and Bellia, G. and Degli-Innocenti, F. and Reis, R.L. and Groot de, K. and Blitterswijk van, C.A. and Bruijn de, J.D. (2003) Evaluation of Two Biodegradable Polymeric Systems as Substrates for Bone Tissue Engineering. Tissue Engineering, 9 (Suppl.). pp. 91-101. ISSN 1076-3279

Nalawade, S.P. and Picchioni, F. and Janssen, L.P.B.M. and Grijpma, D.W. and Feijen, J. (2008) Investigation of the interaction of CO2 with poly (L-lactide), poly(DL-lactide) and poly(-caprolactone) using FTIR spectroscopy. Journal of Applied Polymer Science, 109 (5). pp. 3376-3381. ISSN 0021-8995

Nalawade, S.P. and Picchioni, F. and Marsman, J.H. and Grijpma, D.W. and Feijen, J. and Janssen, L.P.B.M. (2006) Intermolecular interactions between carbon dioxide and the carbonyl groups of polylactides and poly(ε-caprolactone). Journal of Controlled Release, 116 (2). e38-e40. ISSN 0168-3659

Nalawade, S.P. and Westerman, D. and Leeke, G. and Santos, R.C.D. and Grijpma, D.W. and Feijen, J. (2008) Preparation of porous poly(trimethylene carbonate) structures for controlled release applications using high pressure CO2. Journal of Controlled Release, 132 (3). e73-e75. ISSN 0168-3659

Neut, Danielle and Kluin, Otto S. and Crielaard, Bart J. and Mei van der, Henny C. and Busscher, Henk J. and Grijpma, Dirk W. (2009) A biodegradable antibiotic delivery system based on poly-(trimethylene carbonate) for the treatment of osteomyelitis. Acta orthopaedica, 80 (5). pp. 514-519. ISSN 1745-3674

Olde Riekerink, M.B. and Claase, M.B. and Engbers, G.H.M. and Grijpma, D.W. and Feijen, J. (2003) Gas plasma etching of PEO/PBT segmented block copolymer films. Journal of Biomedical Materials Research. Part A, 65 (4). pp. 417-428. ISSN 1549-3296

Papadaki, Maria and Mahmood, Tahir and Gupta, Pavan and Claase, Menno B. and Grijpma, Dirk W. and Riesle, Jens and Blitterswijk van, Clemens A. and Langer, Robert (2001) The different behaviors of skeletal muscle cells and chondrocytes on PEGT/PBT block copolymers are related to the surface properties of the substrate. Journal of Biomedical Materials Research, 54 (1). pp. 47-58. ISSN 0021-9304

Papenburg, B.J. and Boer de, J. and Grijpma, D. and Feijen, J. and Blitterswijk van, C.A. and Wessling, M. and Stamatialis, D. (2009) Novel membrane-based scaffolds for tissue engineering. International journal of artificial organs, 32 (7). pp. 409-410. ISSN 0391-3988

Papenburg, Bernke and Schuller, Sigrid and Stamatialis, Dimitrios and Grijpma, Dirk and Boer de, Jan and Blitterswijk van, Clemens and Wessling, Matthias (2008) Flexible micropatterned porous scaffolds: poster presentation. Tissue Engineering. Part A, 14 (5). p. 855. ISSN 1937-3341

Papenburg, Bernke J. and Bolhuis-Versteeg, Lydia A.M. and Grijpma, Dirk W. and Feijen, Jan and Wessling, Matthias and Stamatialis, Dimitrios (2010) A facile method to fabricate poly(l-lactide) nano-fibrous morphologies by phase inversion. Acta Biomaterialia, 6 (7). pp. 2477-2483. ISSN 1742-7061

Papenburg, Bernke J. and Schüller-Ravoo, Sigrid and Bolhuis-Versteeg, Lydia A.M. and Hartsuiker, Liesbeth and Grijpma, Dirk W. and Feijen, Jan and Wessling, Matthias and Stamatialis, Dimitrios (2009) Designing porosity and topography of poly(1,3-trimethylene carbonate) scaffolds. Acta Biomaterialia, 5 (9). pp. 3281-3294. ISSN 1742-7061

Pego, A.P. and Luyn van, M.J.A. and Brouwer, L.A. and Wachem van, P.B. and Poot, A.A. and Grijpma, D.W. and Feijen, J. (2003) In vivo behavior of poly(1,3-trimethylene carbonate) and copolymers of 1,3-trimethylene carbonate with D,L-lactide or -caprolactone: Degradation and tissue response. Journal of Biomedical Materials Research. Part A, 67 (3). pp. 1044-1054. ISSN 1549-3296

Pego, Ana Paula and Grijpma, Dirk W. and Feijen, Jan (2003) Enhanced mechanical properties of 1,3-trimethylene carbonate polymers and networks. Polymer, 44 (21). pp. 6495-6504. ISSN 0032-3861

Pego, Ana Paula and Poot, André A. and Grijpma, Dirk W. and Feijen, Jan (2002) In Vitro Degradation of Trimethylene Carbonate Based (Co)polymers. Macromolecular Bioscience, 2 (9). pp. 411-419. ISSN 1616-5187

Pego, Ana Paula and Poot, André A. and Grijpma, Dirk W. and Feijen, Jan (2003) Biodegradable elastomeric scaffolds for soft tissue engineering. Journal of Controlled Release, 87 (1-3). pp. 69-79. ISSN 0168-3659

Pego, Ana Paula and Vleggeert-Lankamp, Carmen L.A.M. and Deenen, Marga and Lakke, Egbert A.J.F. and Grijpma, Dirk W. and Poot, André A. and Marani, Enrico and Feijen, Jan (2003) Adhesion and growth of human Schwann cells on trimethylene carbonate (co)polymers. Journal of Biomedical Materials Research. Part A, 67 (3). pp. 876-885. ISSN 1549-3296

Pego, Ana Paula and Zhong, Zhiyuan and Dijkstra, Pieter J. and Grijpma, Dirk W. and Feijen, Jan (2003) Influence of Catalyst and Polymerization Conditions on the Properties of 1,3-Trimethylene Carbonate and ε-Caprolactone Copolymers. Macromolecular Chemistry and Physics, 204 (5-6). pp. 747-754. ISSN 1022-1352

Pego, A.P. and Siebum, B. and Luyn van, M.J.A. and Gallego y Van Seijen, X.J. and Poot, A.A. and Grijpma, D.W. and Feijen, J. (2003) Preparation of Degradable Porous Structures Based on 1,3-Trimethylene Carbonate and D,L-Lactide (Co)polymers for Heart Tissue Engineering. Tissue Engineering, 9 (5). pp. 981-994. ISSN 1076-3279

Poot, A.A. and Grijpma, D.W. and Feijen, J. and Vermes, I. (2012) Vascular tissue engineering. Nederlands Tijdschrift voor Klinische Chemie en Laboratoriumgeneeskunde, 37 . 44 - 46. ISSN 1570-8306

Ronca, A. and Ambrosio, L. and Grijpma, D.W. (2012) Design of porous three-dimensional PDLLA/nano-hap composite scaffolds using stereolithography. Journal of applied biomaterials and functional materials, 10 . 249 - 258. ISSN ISSN 2280-8000

Schüller-Ravoo, S. and Feijen, J. and Grijpma, D.W. (2012) Flexible, elastic and tear-resistant networks prepared by photo-crosslinking poly(trimethylene carbonate) macromers. Acta biomaterialia, 8 (10). 3576 - 3585. ISSN 1742-7061

Seck, Tetsu M. and Melchels, Ferry P.W. and Feijen, Jan and Grijpma, Dirk W. (2010) Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(d,l-lactide)-based resins. Journal of Controlled Release, 148 (1). pp. 34-41. ISSN 0168-3659

Sharifi, S. and Blanquer, S.B.G. and Grijpma, D.W. (2012) Preparation of porous structures with shape memory properties from biodegradable polymeric networks. Materials Research Society symposia proceedings, 1403 . 79 - 84. ISSN 0272-9172

Sharifi, S. and Blanquer, S.B.G. and Grijpma, D.W. (2012) Polymeric microstructures with shape-memory properties for biomedical use built by stereolithography. Journal of applied biomaterials and functional materials, 10 . 280 - 286. ISSN ISSN 2280-8000

Sharifi, S. and Blanquer, S.B.G. and Kooten van, T.G. and Grijpma, D.W. (2012) Biodegradable nanocomposite hydrogel structures with enhanced mechanical properties prepared by photo-crosslinking solutions of poly(trimethylene carbonate)-poly(ethylene glycol)-poly(trimethylene carbonate) macromonomers and nanoclay particles. Acta biomaterialia, 8 . 4233 - 4243. ISSN 1742-7061

Sharifi, S. and Grijpma, D.W. (2012) Resilient Amorphous Networks Prepared by Photo-Crosslinking High-Molecular-Weight D,L-Lactide and Trimethylene Carbonate Macromers: Mechanical Properties and Shape-Memory Behavior. Macromolecular bioscience, 12 . 1423 - 1435. ISSN 1616-5187

Song, Y. and Kamphuis, M. and Zhang, Z. and Vermes, I. and Poot, A.A. and Grijpma, D.W. and Feijen, J. (2008) Poly(trimethylene carbonate)-Based Porous Tubular Structures for Tissue Engineering of Small Diameter Blood Vessels. Tissue Engineering. Part A, 14 (5). p. 927. ISSN 1937-3341

Song, Y. and Kamphuis, M.M.J. and Zhang, Z. and Sterk, L.M.Th. and Vermes, I. and Poot, A.A. and Feijen, J. and Grijpma, D.W. (2010) Flexible and elastic porous poly(trimethylene carbonate) structures for use in vascular tissue engineering. Acta Biomaterialia, 6 (4). pp. 1269-1277. ISSN 1742-7061

Song, Y. and Wennink, J.W.H. and Kamphuis, M.M.J. and Vermes, I. and Poot, A.A. and Feijen, J. and Grijpma, D.W. (2010) Effective seeding of smooth muscle cells into tubular poly(trimethylenecarbonate) scaffolds for vascular tissue engineering. Journal of Biomedical Materials Research. Part A, 95A (2). pp. 440-446. ISSN 1549-3296

Song, Y. and Yang, F. and Jansen, J.A. and Kamphuis, M.M.J. and Zhang, Zheng and Poot, A.A. and Vermes, I. and Grijpma, D.W. and Feijen, J. (2008) Poly(trimethylene carbonate) porous tubular structures made by electro-spinning. Journal of Controlled Release, 132 (3). e79-e80. ISSN 0168-3659

Song, Yan and Wennink, Jos W.H. and Kamphuis, Marloes M.J. and Sterk, Lotus M.T. and Vermes, Istvan and Poot, André A. and Feijen, Jan and Grijpma, Dirk W. (2011) Dynamic Culturing of Smooth Muscle Cells in Tubular Poly(Trimethylene Carbonate) Scaffolds for Vascular Tissue Engineering. Tissue Engineering. Part A, 17 (3-4). pp. 381-387. ISSN 1937-3341

Subbiahdoss, G. and Sharifi, S. and Grijpma, D.W. and Laurent, S. and Mei van der, H.C. and Mahmoudi, M. and Busscher, H.J. (2012) Magnetic targeting of surface-modified superparamagnetic iron oxide nanoparticles yields antibacterial efficacy against biofilms of gentamicin-resistant staphylococci. Acta biomaterialia, 8 (6). 2047 - 2055. ISSN 1742-7061

Subbiahdoss, Guruprakash and Grijpma, Dirk W. and Mei van der, Henny C. and Busscher, Henk J. and Kuijer, Roel (2010) Microbial biofilm growth versus tissue integration on biomaterials with different wettabilities and a polymer-brush coating. Journal of Biomedical Materials Research. Part A, 94A (2). pp. 533-538. ISSN 1549-3296

Subbiahdoss, Guruprakash and Kuijer, Roel and Grijpma, Dirk W. and Mei van der, Henny C. and Busscher, Henk J. (2009) Microbial biofilm growth vs. tissue integration: “The race for the surface” experimentally studied. Acta Biomaterialia, 5 (5). pp. 1399-1404. ISSN 1742-7061

Sun, Y. and Finne-Wistrand, A. and Albertsson, A. and Xing, Z. and Mustafa, K. and Hendrikson, W.J. and Grijpma, D.W. and Moroni, L. (2012) Degradable amorphous scaffolds with enhanced mechanical properties and homogeneous cell distribution produced by a three-dimension fiber deposition method. Journal of biomedical materials research part A, 100A (10). 2739 - 2749. ISSN 1549-3295

Tan, BoonHua and Grijpma, Dirk W. and Nabuurs, Tijs and Feijen, Jan (2005) Crosslinkable surfactants based on linoleic acid-functionalized block copolymers of ethylene oxide and ε-caprolactone for the preparation of stable PMMA latices. Polymer, 46 (4). pp. 1347-1357. ISSN 0032-3861

Tan, BoonHua and Nabuurs, Tijs and Feijen, Jan and Grijpma, Dirk W. (2009) Redox-initiated poly(methyl methacrylate) emulsion polymerizations stabilized with block copolymers based on methoxy-poly(ethylene glycol), ε-caprolactone, and linoleic acid. Journal of Polymer Science, Part A: Polymer chemistry, 47 (17). pp. 4234-4244. ISSN 0887-624X

Vos de, S.V.N. and Koopmans, S.A. and Hooymans, J.M.M. and Feijen, J. and Grijpma, D.W. (2008) Poly(1,3-trimethylene carbonate) networks as a resorbable scleral buckle. Journal of Controlled Release, 132 (3). e51-e52. ISSN 0168-3659

Zant, E. and Bosman, M.J. and Grijpma, D.W. (2012) Combinatorial synthesis of photo-crosslinked biodegradable networks. Journal of applied biomaterials and functional materials, 10 . 197 - 202. ISSN ISSN 2280-8000

Zhang, Zheng and Zou, Shan and Vancso, Julius and Grijpma, Dirk W. and Feijen, Jan (2005) Enzymatic Surface Erosion of Poly(trimethylene carbonate) Films Studied by Atomic Force Microscopy. Biomacromolecules, 6 (6). pp. 3404-3409. ISSN 1525-7797

Zhang, Z. and Buwalda, S.J. and Dijkstra, P.J. and Grijpma, D.W. and Poot, A.A. and Steenbergen, W. and Feijen, J. (2008) Polymeric systems for delivery of growth factors to stimulate angiogenesis in tissue engineering. Journal of Controlled Release, 132 (3). e52-e53. ISSN 0168-3659

Zhang, Z. and Grijpma, D.W. and Feijen, J. (2006) Thermoplastic elastomers based on poly(lactide)–poly(trimethylene carbonate-co-caprolactone)–poly(lactide) triblock copolymers and their stereocomplexes. Journal of Controlled Release, 116 (2). e29-e31. ISSN 0168-3659

Zhang, Z. and Grijpma, D.W. and Feijen, J. (2006) Trimethylene carbonate-based polymers for controlled drug delivery applications. Journal of Controlled Release, 116 (2). e28-e29. ISSN 0168-3659

Zhang, Zheng and Grijpma, Dirk W. and Feijen, Jan (2004) Creep-resistant porous structures based on stereo-complex forming triblock copolymers of 1,3-trimethylene carbonate and lactides. Journal of Materials Science: Materials in Medicin, 15 (4). pp. 381-385. ISSN 0957-4530

Zhang, Zheng and Grijpma, Dirk W. and Feijen, Jan (2004) Triblock Copolymers Based on 1,3-Trimethylene Carbonate and Lactide as Biodegradable Thermoplastic Elastomers. Macromolecular Chemistry and Physics, 205 (7). pp. 867-875. ISSN 1022-1352

Zhang, Zheng and Grijpma, Dirk W. and Feijen, Jan (2006) Poly(trimethylene carbonate) and monomethoxy poly(ethylene glycol)-block-poly(trimethylene carbonate) nanoparticles for the controlled release of dexamethasone. Journal of Controlled Release, 111 (3). pp. 263-270. ISSN 0168-3659

Zhang, Zheng and Grijpma, Dirk W. and Feijen, Jan (2006) Thermo-sensitive transition of monomethoxy poly(ethylene glycol)-block-poly(trimethylene carbonate) films to micellar-like nanoparticles. Journal of Controlled Release, 112 (1). pp. 57-63. ISSN 0168-3659

Zhang, Zheng and Kuijer, Roel and Bulstra, Sjoerd K. and Grijpma, Dirk W. and Feijen, Jan (2006) The in vivo and in vitro degradation behavior of poly(trimethylene carbonate). Biomaterials, 27 (9). pp. 1741-1748. ISSN 0142-9612

Zweers, Miechel L.T. and Engbers, Gerard H.M. and Grijpma, Dirk W. and Feijen, Jan (2006) Release of anti-restenosis drugs from poly(ethylene oxide)-poly(dl-lactic-co-glycolic acid) nanoparticles. Journal of Controlled Release, 114 (3). pp. 317-324. ISSN 0168-3659

Zweers, Miechel L.T. and Grijpma, Dirk W. and Engbers, Gerard H.M. and Feijen, Jan (2003) The preparation of monodisperse biodegradable polyester nanoparticles with a controlled size. Journal of Biomedical Materials Research. Part B: Applied biomaterials, 66 (2). pp. 559-566. ISSN 0021-9304

Zweers, Miechel L.T. and Engbers, Gerard H.M. and Grijpma, Dirk W. and Feijen, Jan (2004) In vitro degradation of nanoparticles prepared from polymers based on DL-lactide, glycolide and poly(ethylene oxide). Journal of Controlled Release, 100 (3). pp. 347-356. ISSN 0168-3659