Author Publications

2013

Damgrave, R.G.J. and Lutters, D. and Houten van, F.J.A.M. (2013) The Virtual Reality Lab as a Synthetic Environment: from strategic approach to practical implement. In: CIRP Design Conference 2013.

2012

Gorter, T. and Reinders, A.H.M.E. and Houten van, F.J.A.M. (2012) A new numerical simulation approach to predict performance of PV systems for PV boats. In: 27th EU Photovoltaic Solar Energy Conference and Exhibition, Frankfurt.

Gorter, T. and Reinders, A.H.M.E. and Houten van, F.J.A.M. (2012) Monitored PV system data analysis of PV-powered racing boat during the Frisian Solar Challenge. In: 27th EU Photovoltaic Solar Energy Conference and Exhibition, Frankfurt.

Gorter, T. and Voerman, E.J. and Joore, J. and Reinders, A.H.M.E. and Houten van, F.J.A.M. (2012) PV system data analysis of a PV-powered racing boat during the Frisian Solar Challenge 2010. In: 38th IEEE Photovoltaic Specialists Conference, Austin, USA.

Schotborgh, W.O. and McMahon, C.A. and Houten van, F.J.A.M. (2012) A knowledge aquisition method to model parametric engineering design process. International journal of computer aided engineering and technology, 4 . 373 - 391. ISSN 1757-2657

Veldhuis, A.J. and Reinders, A.H.M.E. and Houten van, F.J.A.M. (2012) Comparison of BIPV simulation with monitored data: the case of a 35 kWp PV system in Jayapura, Indonesia. In: 27th EU Photovoltaic Solar Energy Conference and Exhibition, Frankfurt.

2011

Jauregui Becker, J.M. and Wits, W.W. and Houten van, F.J.A.M. (2011) Modeling the Structure and Complexity of Engineering Routine Design Problems. In: 21st CIRP Design Conference, March 27-29, 2011, Daejeon, South Korea.

2010

Alvarez Cabrera, A.A. and Foeken, M.J. and Tekin, O.A. and Woestenenk, K. and Erden, M.S. and De Schutter, B. and Tooren, M.J.L. and Babuska, R. and Houten van, F.J.A.M. and Tomiyama, T. (2010) Towards automation of control software: a review of challenges in mechatronic design. Mechatronics, 20 (8). pp. 876-886. ISSN 0957-4158

Bonnema, G. Maarten and Borches, P. Daniel and Kauw-A-Tjoe, Rogier and Houten van, Fred J.A.M. (2010) Communication: Key Factor in Multidisciplinary System Design. In: 8th Conference on Systems Engineering Research, CSER, March 17-19, 2010, Hoboken, NJ, USA.

2009

Houten van, Fred J.A.M. (2009) Preface. CIRP Journal of Manufarcuring Science and Technology, 1 (3). p. 119. ISSN 1755-5817

Jauregui Becker, J.M. and Tragter, H. and Houten van, F.J.A.M. (2009) Structure and models of artifactual routine design problems for computational synthesis. CIRP Journal of Manufarcuring Science and Technology, 1 (3). pp. 120-125. ISSN 1755-5817

Miedema, J. and Voort van der, M.C. and Houten van, F.J.A.M. (2009) Advantageous application of Synthetic Environments in product design. CIRP Journal of Manufarcuring Science and Technology, 1 (3). pp. 159-164. ISSN 1755-5817

2008

Jauregui-Becker, Juan M. and Wits, Wessel W. and Houten van, Fred J.A.M. (2008) Reducing design complexity of multidisciplinary domain integrated products: a case study. In: Manufacturing Systems and Technologies for the New Frontier. Springer, London, pp. 149-154. ISBN 9781848002661

Schotborgh, W.O. and Kokkeler, F.G.M. and Tragter, H. and Bomhoff, M.J. and Houten van, F.J.A.M. (2008) A Generic Synthesis Algorithm for Well-Defined Parametric Design. In: 18th CIRP Design Conference, 7-9 April 2008, Enschede, Netherlands.

Vaneker, T.H.J. and Koenis, P.T.G. and Ouwerkerk van, G. and Nilsen, K.E. and Houten van, F.J.A.M. (2008) Integrated bottom up and top down approach to optimization of the extrusion process. CIRP Annals, 57 (1). pp. 183-186. ISSN 0007-8506

2006

Bonnema, G. Maarten and Houten van, Fred J.A.M. (2006) Use of models in conceptual design. Journal of Engineering Design, 17 (6). pp. 549-562. ISSN 0954-4828

Sanders, A.J.B. and Warntjes, P. and Geelkerken, R.H. and Mastboom, W.J.B. and Klaase, J.M. and Rodel, S.G.J. and Luursema, J.-M. and Kommers, P.A.M. and Verwey, W.B. and Houten van, F.J.A.M. and Kunst, E.E. (2006) Open surgery in VR: Inguinal hernia repair according to Lichtenstein. In: Medicine meets virtual reality 14 : accelerating change in healthcare : next medical toolkit. IOS Press, pp. 477-479. ISBN 9781586035839

Vaneker, T.H.J. and Houten van, F.J.A.M. (2006) What-if Design as a Synthesizing Working Method in Product Design. CIRP Annals, 55 (1). pp. 131-134. ISSN 0007-8506

2005

Bonnema, G. Maarten and Lutters-Weustink, Ilanit F. and Houten van, Fred J.A.M. (2005) Introducing systems engineering to industrial design engineering students with hands-on experience. In: 18th International Conference on Systems Engineering, 2005. ICSEng 2005.

Schotborgh, Wouter O. and Kokkeler, Frans G.M. and Tragter, Hans and Houten van, Fred J.A.M. (2005) Dimensionless design graphs for flexure elements and a comparison between three flexure elements. Precision Engineering, 29 (1). pp. 41-47. ISSN 0141-6359

2004

Eger, A.O. and Lutters, D. and Houten van, F.J.A.M. (2004) 'Create the future': an environment for excellence in teaching future-oriented Industrial Design Engineering. In: 2nd International Engineering and Product Design Education Conference, IEPDE, September 2-3, 2004, Delft, The Netherlands.

Lutters, D. and Vaneker, T.H.J. and Houten van, F.J.A.M. (2004) ‘What-if’ design: a synthesis method in the design process. CIRP Annals, 53 (1). pp. 113-116. ISSN 0007-8506

Takata, S. and Kimura, F. and Houten van, F.J.A.M. and Westkamper, E. and Shpitalni, M. and Ceglarek, D. and Lee, J. (2004) Maintenance: Changing Role in Life Cycle Management. CIRP Annals, 53 (2). pp. 643-655. ISSN 0007-8506

Tideman, M. and Voort van der, M.C. and Houten van, F.J.A.M. (2004) Design and evaluation of a virtual gearshift application. In: IEEE Intelligent Vehicles Symposium 2004, June 14-17, 2004, Parma, Italy.

2003

Bonnema, G. Maarten and Houten van, Fred J.A.M. (2003) Conceptual design in a high-tech environment. In: The 2003 CIRP International Seminar, 14 May 2003, Grenoble.

Mentink, R.J. and Houten van, F.J.A.M. and Kals, H.J.J. (2003) Dynamic process management for engineering environments. CIRP Annals, 52 (1). pp. 351-354. ISSN 0007-8506

2002

Zimmermann, J.U. and Haasis, S. and Houten van, F.J.A.M. (2002) ULEO - Universal Linking of Engineering Objects. CIRP Annals, 51 (1). pp. 99-102. ISSN 0007-8506

2001

Lutters, D. and Mentink, R.J. and Houten van, F.J.A.M. and Kals, H.J.J. (2001) Workflow management based on Information Management. CIRP Annals, 50 (1). pp. 309-312. ISSN 0007-8506

2000

Houten van, F.J.A.M. and Kimura, F. (2000) The Virtual Maintenance System: A Computer-Based Support Tool for Robust Design, Product Monitoring, Fault Diagnosis and Maintenance Planning. CIRP Annals, 49 (1). pp. 91-94. ISSN 0007-8506

1998

Houten van, F.J.A.M. and Tomiyama, T. and Salomons, O.W. (1998) Product Modelling for Model-Based Maintenance. CIRP Annals, 47 (1). pp. 123-128. ISSN 0007-8506

1996

Salomons, O.W. and Haalboom, F.J. and Jonge Poerink, H.J. and Slooten van, F. and Houten van, F.J.A.M. and Kals, H.J.J. (1996) A computer aided tolerancing tool II: Tolerance analysis. Computers in Industry, 31 (2). pp. 175-186. ISSN 0166-3615

Salomons, O.W. and Jonge Poerink, H.J. and Haalboom, F.J. and Slooten van, F. and Houten van, F.J.A.M. and Kals, H.J.J. (1996) A computer aided tolerancing tool, I: tolerancing specification. Computers in Industry, 31 (2). pp. 161-174. ISSN 0166-3615

1995

Salomons, O.W. and Kuipers, J.M. and Graaff de, J. and Slooten van, F. and Houten van, F.J.A.M. and Kals, H.J.J. (1995) Collaborative Product Development in CAD and CAPP : an approach based on communication due to constraint conflicts and user initiative. In: IFIP WG5.2 Workshop on Knowledge-Intensive CAD-1, 26-29 September 1995, Espoo, Finland.

1994

Salomons, O.W. and Slooten van, F. and Koning, G.W.F. and Houten van, F.J.A.M. and Kals, H.J.J. (1994) Conceptual Graphs in CAD. CIRP Annals, 43 (1). pp. 125-128. ISSN 0007-8506

1993

Salomons, O.W. and Houten van, F.J.A.M. and Kals, H.J.J. (1993) Review of research in feature-based design. Journal of Manufacturing Systems, 12 (2). pp. 113-132. ISSN 0278-6125

1992

Houten van, F.J.A.M. (1992) Manufacturing Interfaces. CIRP Annals, 41 (2). pp. 699-710. ISSN 0007-8506

1986

Houten van, F.J.A.M. and Kals, H.J.J. (1986) Strategy in Generative Planning of Turning Processes. CIRP Annals, 35 (1). pp. 331-335. ISSN 0007-8506

1981

Houten van, F.J.A.M. and Kals, H.J.J. (1981) The Development of a Technological Processor as a Part of a Workpiece Programming System. CIRP Annals, 30 (1). pp. 363-368. ISSN 0007-8506

NULL

Layer, A. and Haasis, S. and Houten van, F.J.A.M. Feature based design concurrent cost calculation using case based reasoning. In: Proceedings of the 2001 ASME Design for Manufacturing Conference, Pittsburgh, USA.