Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998
Number of items: 156.

2014

Dallinger, F.N. and Roux, E.P. and Hora, P. and Barlat, F. and Boogaard, A.H. van den (2014) Strain path dependent evolution of yield locus based on HAH model description. In: IDDRG 2014, Paris, June 1-4, 01-06-2014 - 04-06-2015, Paris (pp. 163 - 168).

Eller, T.K. and Greve, L. and Andres, M.T. and Medricky, M. and Hatscher, A. and Meinders, V.T. and Boogaard, A.H. van den (2014) Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties. Journal of materials processing technology, 214 (6). 1211 - 1227. ISSN 0924-0136

Emmens, W.C. and Boogaard, A.H. van den (2014) A yield criterion based on mean shear stress. Key engineering materials, 611-612 . 3 - 10. ISSN 1013-9826

Havinga, G.T. and Boogaard, A.H. van den and Dallinger, F.N. and Hora, P. (2014) Inline control of a strip bending process in mass production. In: IDDRG, 01-06-2014 - 04-06-2014, Paris (pp. 175 - 180).

Hol, J. and Wiebenga, J.H. and Dane, C. and Meinders, V.T. and Boogaard, A.H. van den (2014) A software solution for advanced friction modeling applied to sheet metal forming. In: IDDRG 2014, 02-06-2014 - 05-06-2014, Paris (pp. 344 - 349).

Hou, B. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Kitting, D. (2014) Study on instability and forming limit of sheet metal under stretch-bending. Key engineering materials, 611-612 . 84 - 91. ISSN 1013-9826

Meinders, V.T. and Hol, J. and Boogaard, A.H. van den (2014) Boundary and Mixed Lubrication Friction Modeling under forming process conditions. In: Numisheet 2014, 06-01-2014 - 10-01-2014, Melville (pp. 912 - 917).

Wiebenga, J.H. and Atzema, E.H. and An, Y.G. and Vegter, H. and Boogaard, A.H. van den (2014) Effect of material scatter on the plastic behavior and stretchability in sheet metal forming. Journal of materials processing technology, 214 (2). 238 - 252. ISSN 0924-0136

Wiebenga, J.H. and Atzema, E.H. and Boogaard, A.H. van den (2014) Stretching the limits of forming processes by robust optimization: A demonstrator. In: NUMISHEET 2014 Conference, 2014-01-06 - 2014-01-10, Melbourne.

Yue, Z. M. and Badreddine, H. and Saanouni, K. and Perdahcioglu, E.S. and Soyarslan, C. and Tekkaya, A. E. and Boogaard, A.H. van den (2014) On the distortion of yield surface under complex loading paths in sheet metal forming. In: IDDRG, 01-06-2014 - 04-06-2014, Paris (pp. 246 - 251).

2013

Clausmeyer, T. and Gerstein, G. and Bargmann, S. and Svendsen, B. and Boogaard, A.H. van den and Zillmann, B. (2013) Experimental characterization of microstructure development during loading path changes in bcc sheet steels. Journal of materials science, 48 (2). 674 - 689. ISSN 0022-2461

Eller, T.K. and Greve, L and Anders, M.T. and Medricky, M and Hatscher, A and Meinders, V.T. and Boogaard, A.H. van den (2013) Constitutive modeling of quench-hardenable boron steel with tailored properties. In: 6th Forming Technology Forum: Modelling of process chains and interfaces for sheet metal forming, Herrsching, 19-20 September 2013, 19-09-2013 - 20-09-2013, Herrsching (pp. 1 - 6).

Geijselaers, H.J.M. and Hilkhuijsen, P. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2013) Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels. In: The 11th International Conference on Numerical Methods in Forming Processes, NUMIFORM2013, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 175 - 182).

Havinga, G.T. and Boogaard, A.H. van den and Klaseboer, G. (2013) Sequential optimization of strip bending process using Multiquadric Radial Basis Function surrogate models. In: 16th ESAFORM Conference on Material Forming, April 22-24, 2013, Aveiro, Portugal, 22-24 April 2013, Aveiro, Portugal.

Havinga, Jos and Boogaard, Ton van den and Klaseboer, Gerrit (2013) Sequential optimization of strip bending process using multiquadric radial basis function surrogate models. Key engineering materials, 554-557 . 911 - 918. ISSN 1013-9826

Hilkhuijsen, P. and Geijselaers, H.J.M. and Bor, T.C. and Perdahcioglu, E.S. and Boogaard, A.H. van den and Akkerman, R. (2013) Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of gamma-texture. Materials science & engineering A, 573 . 100 - 105. ISSN 0921-5093

Hol, J. and Meinders, V.T. and Boogaard, A.H. van den (2013) Experimental and numerical friction characterization for large-scale forming simulations. In: IDDRG 2013, Zurich, Switzerland, June 2-5 2013, 02-06-2013 - 05-06-2013, Zurich (pp. 337 - 342).

Kitting, D. and Ofenheimer, A. and Boogaard, A.H. van den and Dietmaier, P. (2013) Deformation scenarios of combined stretching and bending in complex shaped deep drawing parts. Key engineering materials, 554 - 557 . 1252 - 1264. ISSN 1013-9826

Mulder, J. and Vegter, H. and Aretz, H. and Boogaard, A.H. van den (2013) Accurate evaluation method for the hydraulic bulge test. Key engineering materials, 554-557 . 33 - 40. ISSN 1013-9826

Niazi, M.S. and Meinders, V.T. and Wisselink, H.H. and Horn, C.H.L.J. ten and Klaseboer, G. and Boogaard, A.H. van den (2013) A Plasticity Induced Anisotropic Damage Model for Sheet Forming Processes. Key engineering materials, 554-557 . 1245 - 1251. ISSN 1013-9826

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Boogaard, A.H. van den (2013) Material Induced Anisotropic Damage in DP600. International journal of damage mechanics, 22 (7). 1039 - 1070. ISSN 1530-7921

Perdahcioglu, E.S. and Audish, D. and Boogaard, A.H. van den and Janssen, D. and Verdonschot, N.J.J. (2013) Failure modelling of human femur. In: 3rd International Conference on Material Modelling, 08-09-2013 - 11-09-2013, Warsaw (pp. 259 - 259).

Ravenswaaij, R. van and Tijum, R. van and Hora, P. and Boogaard, A.H. van den and Engel, U. (2013) Towards zero-defect manufacturing of smal metal parts. In: IDDRG 2013, 02-06-2013 - 05-06-2013, Zurich (pp. 87 - 92).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. In: ESAFORM 2013, 22-04-2013 - 24-04-2013, Aveiro (pp. 1014 - 1021).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Boogaard, A.H. van den (2013) Cladding of Advanced Al Alloys Employing Friction Stir Welding. Key engineering materials, 554-557 . 1014 - 1021. ISSN 1013-9826

Wang, C. and Geijselaers, H.J.M. and Boogaard, A.H. van den (2013) Multi-Stage FE Simulation of Hot Ring Rolling. In: The 11th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 2013, 6–10 July 2013, Shenyang, China, 06-07-2013 - 10-07-2013, Shenyang, China (pp. 1014 - 1019).

Wiebenga, J.H. and Atzema, E.H. and Boterman, R. and Abspoel, M. and Boogaard, A.H. van den (2013) Accounting for material scatter in sheet metal forming simulations. In: IDDRG 2013 conference, 02-06-2013 - 05-06-2013, Zurich (pp. 57 - 62).

Wiebenga, J.H. and Boogaard, A.H. van den (2013) On the effect of numerical noise in approximate optimization of forming processes using numerical simulations. International journal of material forming . ISSN 1960-6206

Wiebenga, J.H. and Weiss, M. and Rolfe, B. and Boogaard, A.H. van den (2013) Product defect compensation by robust optimization of a cold roll forming process. Journal of materials processing technology, 213 . 978 - 986. ISSN 0924-0136

2012

Boogaard, A.H. van den and Quak, W. (2012) Adaptive smoothed FEM for forming simulations. In: ECCOMAS 2012, September 10-14, 2012, Vienna, Austria (pp. CD-ROM ).

Emmens, W.C. and Boogaard, A.H. van den (2012) Material characterization at high strain by adapted tensile tests. Experimental mechanics, 52 (8). 1195 - 1209. ISSN 0014-4851

Geijselaers, H.J.M. and Perdahcioglu, E.S. and Boogaard, A.H. van den (2012) A macro scale constitutive model for TRIP steel. In: ECCOMAS 2012, September 10-14, 2012, Vienna, Austria (pp. CD-ROM ).

Hadoush, A. and Boogaard, A.H. van den (2012) Efficient implicit simulation of incremental sheet forming. International journal for numerical methods in engineering, 90 (5). 597 - 612. ISSN 0029-5981

Mulder, J. and Vegter, H. and Ha, J.J. and Boogaard, A.H. van den (2012) Determination of flow curves under equibiaxial stress conditions. Key engineering materials, 504-506 . 53 - 58. ISSN 1013-9826

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Boogaard, A.H. van den (2012) Material Induced Anisotropic Damage. In: 5th Forming Technology Forum 2012, June 5-6, 2012, Zurich (pp. 23 - 28).

Wiebenga, J.H. and Boogaard, A.H. van den and Klaseboer, G. (2012) Sequential robust optimization of a V-bending process using numerical simulations. Structural and multidisciplinary optimization, 46 (1). 137 - 153. ISSN 1615-147X

2011

Boogaard, A.H. van den and Krauer, J. and Hora, P. (2011) Transformation in Austenitic Stainless Steel Sheet under Different Loading Directions. Key Engineering Materials, 473 . pp. 444-451. ISSN 1013-9826

Clausmeyer, Till and Boogaard, Ton van den and Noman, Mohammad and Gershteyn, Gregoriy and Schaper, Mirko and Svendsen, Bob and Bargmann, Swantje (2011) Phenomenological modeling of anisotropy induced by evolution of the dislocation structure on the macroscopic and microscopic scale. International Journal of Material Forming, 4 (2). pp. 141-154. ISSN 1960-6206

Emmens, W.C. and Boogaard, A.H. van den (2011) The stabilizing effect of bending-under-tension. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 1583 - 1588).

Emmens, W.C. and Boogaard, A.H. van den (2011) Cyclic stretch-bending: mechanics, stability and formability. Journal of Materials Processing Technology, 211 (12). 1965 - 1981. ISSN 0924-0136

Emmens, W.C. and Boogaard, A.H. van den (2011) Formability in incremental sheet forming and cyclic stretch-bending. Steel Research International . 513 - 518. ISSN 1611-3683

Hadoush, A. and Boogaard, A.H. van den and Emmens, W.C. (2011) A numerical investigation of the continuous bending under tension test. Journal of Materials Processing Technology, 211 (12). 1948 - 1956. ISSN 0924-0136

Kurukuri, Srihari and Miroux, Alexis and Wisselink, Harm and Boogaard, Ton van den (2011) Simulation of stretch forming with intermediate heat treatments of aircraft skins - a physically based modeling approach. International Journal of Material Forming, 4 (2). 129 - 140. ISSN 1960-6206

Martinez Lopez, A. and Boogaard, A.H. van den (2011) Formability Limit Curves under Stretch-Bending. In: 15th International Deep Drawing Research Group Conference, IDDRG 2011, 5-8 June 2011, Bilbao, Spain.

Quak, W. and Boogaard, A.H. van den (2011) Adaptive Smoothed Finite Elements (ASFEM) for history dependent material models. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 1197 - 1202).

Quak, W. and Boogaard, A.H. van den and Gonzalez, D. and Cueto, E. (2011) A comparative study on the performance of meshless approximations and their integration. Computational Mechanics, 48 (2). pp. 121-137. ISSN 0178-7675

Wiebenga, J.H. and Klaseboer, G. and Boogaard, A.H. van den (2011) Robust optimization of metal forming processes using a metamodel-based strategy. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 11 - 16).

Wiebenga, J.H. and Klaseboer, G. and Boogaard, A.H. van den (2011) Efficient Robust Optimization of Metal Forming Processes using a Sequential Metamodel Based Strategy. In: 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2011, 21-26 August 2011, Seoul, South Korea (pp. 978 - 985).

2010

Atzema, E.H. and Fictorie, E. and Boogaard, A.H. van den and Droog, J.M.M. (2010) The influence of curvature on FLC’s of mild steel, (A)HSS and aluminium. In: IDDRG 2010 International Conference, May 31 - June 2, 2010, Graz, Austria (pp. 519 - 528).

Bonte, Martijn H.A. and Fourment, Lionel and Do, Tien-tho and Boogaard, A.H. van den and Huetink, J. (2010) Optimization of forging processes using Finite Element simulations : A comparison of Sequential Approximate Optimization and other algorithms. Structural and Multidisciplinary Optimization, 42 (5). 797 - 810. ISSN 1615-147X

Boogaard, A.H. van den and Riel, M. van (2010) Non-proportional deformation paths for sheet metal - experiments. In: Plasticity 2010, January 3-8, 2010, St. Kitts (pp. 223 - 225).

Boogaard, A.H. van den and Emmens, W.C. and Huetink, J. (2010) Effect of Thickness Stress in Stretch-Bending. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 504 - 511).

Emmens, W.C. and Boogaard, A.H. van den (2010) Contact effects in bending affecting stress and formability. International journal of material forming, 3 (1). pp. 1159-1162. ISSN 1960-6206

Emmens, W.C. and Sebastiani, G. and Boogaard, A.H. van den (2010) The technology of Incremental Sheet Forming - a brief review of the history. Journal of Materials Processing Technology, 210 (8). pp. 981-997. ISSN 0924-0136

Emmens, W.C. and Kazantzis, A.V. and Hosson, J.Th.M. de and Boogaard, A.H. van den (2010) Fractional behaviour at cyclic stretch-bending. In: 50th IDDRG Anniversary Conference, May 31 - June 2, 2010, Graz, Austria (pp. 613 - 622).

Fictorie, E. and Boogaard, A.H. van den and Atzema, E.H. (2010) Influence of Punch Radius in a Nakazima Test for Mild Steel and Aluminium. International Journal of Material Forming, 3 (Suppl. 1). 1179 - 1182. ISSN 1960-6206

Hadoush, A. and Boogaard, A.H. van den (2010) Efficient implicit simulation for incremental forming. In: IV European Congress on Computational Mechanics ECCM IV: Solids, Structures and Coupled Problems in Engineering, May 16-21, 2010, Paris, France.

Kurukuri, S. and Boogaard, A.H. van den and Ghosh, M. and Miroux, A. (2010) Thermo-mechanical Forming of Al–Mg–Si Alloys: Modeling and Experiments. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 810 - 817).

Martinez-Lopez, A. and Boogaard, A.H. van den (2010) Numerical Determination of Sheet Metal Formability under Simultaneous Stretching and Bending. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2010, 24-27 October 2010, Paris, France (pp. pp. 413-418).

Martínez López, Alejandro and Boogaard, A.H. van den (2010) Effect of bending on formability limits. In: XVI Congreso Internacional Anual de la SOMIM 2010, September 22-24, 2010, Nuevo Leon, Mexico.

Miroux, Alexis and Ghosh, Manojit and Kurukuri, Srihari and Kestens, Leo and Boogaard, Ton van den (2010) Mechanical and Forming Properties of AA6xxx Sheet from Room to Warm Temperatures. In: 12th International Conference on Aluminium Alloys, ICAA, September 5-9, 2010, Yokohama, Japan (pp. 1243 - 1248).

Quak, W. and Boogaard, A.H. van den (2010) An adaptive method for history dependent materials. In: World Congress on Computational Mechanics, 1-2 October 2010, The Hague (pp. 187 - 188).

2009

Boogaard, A.H. van den and Riel, M. van (2009) Non-proportional deformation paths for sheet metal: experiments and models. In: 3rd Forming Technology Forum Zurich 2009 - Constitutive Modeling of Kinematic and Anisotropic Hardening Effects for Ductile Materials, May 5-6, 2009, Zurich, Switzerland (pp. 57 - 62).

Boogaard, A.H. van den and Kurukuri, Srihari and Ghosh, Manojit and Miroux, Alexis G. (2009) Thermo-mechanical forming of Al-Mg-Si Sheet. Computer methods in materials science, 9 (1). 5 - 11. ISSN 1641-8581

Emmens, W.C. and Boogaard, A.H. van den (2009) An overview of stabilizing deformation mechanisms in incremental sheet forming. Journal of Materials Processing Technology, 209 (8). pp. 3688-3695. ISSN 0924-0136

Emmens, W.C. and Boogaard, A.H. van den (2009) Incremental forming by continuous bending under tension - an experimental investigation. Journal of Materials Processing Technology, 209 (14). 5456 - 5463. ISSN 0924-0136

Emmens, W.C. and Boogaard, A.H. van den (2009) Incremental sheet forming analysed by tensile tests. Key Engineering Materials, 410-41 . 347 - 354. ISSN 1013-9826

Emmens, W.C. and Boogaard, A.H. van den and Weijde, D.H. van der (2009) The FLC, enhanced fromavbility, and incremental sheet forming. In: IDDRG, 1-3 June 2009, Golden, USA (pp. 773 - 784).

Hadoush, A. and Boogaard, A.H. van den (2009) On the performance of substructuring implicit simulation of single point incremental forming. International Journal of Material Forming, 2 (Suppl. 1). pp. 559-562. ISSN 1960-6206

Hadoush, A. and Boogaard, A.H. van den (2009) Substructuring in the implicit simulation of single point incremental sheet forming. International Journal of Material Forming, 2 (3). 181 - 189. ISSN 1960-6206

Kurukuri, S. and Boogaard, A.H. van den (2009) Effect of temperature on anisotropy. In: M2i Conference: Materials to Innovate Industry and Society, Noordwijkerhout.

Kurukuri, S. and Boogaard, A.H. van den and Miroux, A. and Holmedal, B. (2009) Warm forming simulation of Al-Mg sheet. Journal of Materials Processing Technology, 209 (15-16). 5636 - 5645. ISSN 0924-0136

Kurukuri, S. and Miroux, A. and Ghosh, M. and Boogaard, A.H. van den (2009) Effect of temperature on anisotropy in forming simulations of aluminum alloys. International Journal of Material Forming, 2 (Suppl.). 387 - 390. ISSN 1960-6206

Kurukuri, Srihari and Miroux, Alexis and Ghosh, Manojit and Boogaard, Ton van den (2009) An advanced material model for aluminum sheet forming at elevated temperatures. In: COMPLAS X, 2-4 September 2009, Barcelona, Spain.

Quak, W. and Boogaard, A.H. van den (2009) Nodal integration of meshless methods. In: International Conference on Particle-Based Methods, Particles 2009, 25-27 November 2009, Barcelona, Spain.

Quak, W. and Boogaard, A.H. van den and Huetink, J. (2009) Meshless methods and forming processes. International Journal of Material Forming, 2 (Suppl.). 585 - 588. ISSN 1960-6206

Quak, W. and Gonzalez, D. and Cueto, E. and Boogaard, A.H. van den (2009) On the use of local max-ent shape functions for the simulation of forming processes. In: X International Conference on Computational Plasticity, COMPLAS X, 2-4 September 2009, Barcelona, Spain.

2008

Berisha, B. and Hora, P. and Tong, L. and Wahlen, A. and Boogaard, A.H. van den (2008) Modelling of Dynamic Strain Aging with a Dislocation-Based Isotropic Hardening Model and Investigation of Orthogonal Loading. In: ICTP 2008, international conference on technology of plasticity, September 7-11, 2008, Gyeungju, Korea (pp. pp. 339-344).

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2008) An optimisation strategy for industrial metal forming processes. Structural and Multidisciplinary Optimization, 35 (6). pp. 571-586. ISSN 1615-147X

Boogaard, A.H. van den and Carleer, B.D. and Atzema, E.H. and Wijlen, E.V. ter (2008) Experimental validation of numerical sensitivities in a deep drawing simulation. International Journal of Material Forming . ISSN 1960-6206

Carleer, Bart and Zwickl, Titus and Boogaard, Ton van den and Atzema, Eisso (2008) One day try-out, identifying influence and sensitivity in stamping. In: Numisheet 2008, 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, September 1-5, 2008, Interlaken, Switzerland (pp. pp. 829-834).

Hadoush, A. and Boogaard, A.H. van den (2008) Time reduction in implicit single point incremental sheet forming simulation by refinement - derefinement. International Journal of Material Forming . ISSN 1960-6206

Kurukuri, S. and Ghosh, M. and Boogaard, A.H. van den (2008) A Dislocation based Constitutive Model for Warm Forming of Aluminum Sheet. In: The 9th International Conference on Technology of Plasticity, ICTP, 7-11 September 2008, Gyeongju, Korea (pp. pp. 333-338).

Riel, M. van and Boogaard, A.H. van den (2008) Measurements and calculations on yield surfaces in tension-simple shear experiments. In: 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2008, September 1-5, 2008, Interlaken, Switzerland (pp. pp. 61-66).

2007

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) Deterministic and robust optimisation strategies for metal forming proceesses. In: Forming Technology Forum 2007 – Application of Stochastics and Optimization Methods, 14th – 15th March 2007, ETH Zurich, Switzerland.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) A metamodel based optimisation algorithm for metal forming processes. In: Advanced Methods in Material Forming. Springer, pp. 55-72. ISBN 9783540698449

Bonte, M.H.A. and Boogaard, A.H. van den and Ravenswaaij, R. van (2007) A Robust Optimisation Strategy for Metal Forming Processes. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal (pp. pp. 493-498).

Bonte, M.H.A. and Boogaard, A.H. van den and Ravenswaaij, R. van (2007) The robust optimisation of metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 9-14).

Bonte, M.H.A. and Boogaard, A.H. van den and Veldman, E. (2007) Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 3-8).

Boogaard, A.H. van den and Bonte, M.H.A. and Ravenswaaij, R. van (2007) Computational optimisation of robust sheet forming processes. In: IDDRG 2007 International Conference, 21-23 May 2007, Gyor, Hungary.

Emmens, W.C. and Boogaard, A.H. van den (2007) Formability created by the Bauschinger effect? In: 2nd International Conference on New Forming Technology, ICNFT 2007, September 20-21, 2007, Bremen, Germany (pp. pp. 79-86).

Emmens, W.C. and Boogaard, A.H. van den (2007) Strain in Shear, and Material Behaviour in Incremental Forming. In: Sheet Metal 2007, April 1-4, 2007, Palermo, Italy (pp. pp. 519-526).

Hadoush, A. and Boogaard, A.H. van den and Huetink, J. (2007) Stable incremental deformation of a strip to high strain. In: Sheet metal 2007, April 1st-4th 2007, Palermo, Italy (pp. pp. 615-620).

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2007) Numerical Forming Simulations and Optimisation in Advanced Materials. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 281-286).

Kurukuri, S. and Boogaard, A.H. van den and Huetink, J. (2007) Finite element simulation of aluminum sheet warm forming using alflow hardening model. In: IX International Conference on Computational Plasticity, COMPLAS 2007, 5-7 September 2007, Barcelona, Spain (pp. pp. 635-638).

Riel, M. van and Boogaard, A.H. van den (2007) Consistent plane stress-3D conversion of hardening models and yield criteria. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 624-627).

Riel, M. van and Boogaard, A.H. van den (2007) Stress–strain responses for continuous orthogonal strain path changes with increasing sharpness. Scripta Materialia, 57 (5). pp. 381-384. ISSN 1359-6462

Trichon, S. and Bonte, M.H.A. and Boogaard, A.H. van den and Ponthot, J.-P. (2007) A Study For Efficiently Solving Optimisation Problems With An Increasing Number Of Design Variables. In: NUMIFORM 2007, International Conference in numerical methods in industrial forming processes, June 17-21, 2007, Porto, Portugal (pp. pp. 481-486).

Trichon, Sophie and Bonte, Martijn and Ponthot, Jean-Philippe and Boogaard, Ton van den (2007) Aspects of approximate optimisation: overcoming the curse of dimensionality and design of experiments. In: Inverse Problems, Design and Optimization Symposium, April 16-18, 2007, Miami, Florida,U.S.A.

Vegter, H. and Horn, C.H.L.J. ten and Boogaard, A.H. van den (2007) Influence Of The Plastic Material Behaviour On The Prediction Of Forming Limits. In: NUMIFORM 2007, International Conference in Numerical Methods in Industrial Forming Processes, June 17-21, 2007, Porto, Portugal (pp. pp. 87-92).

2006

Bonte, M.H.A. and Boogaard, A.H. van den and Carleer, B.D. (2006) Optimising towards robust metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 47-50).

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2006) An optimisation strategy for industrial metal forming processes: abstract WCCM 2006. In: 7th World Congress on Computational Mechanics, July 16 - 22, 2006, Los Angeles, California.

Bonte, M.H.A. and Do, T.T. and Fourment, L. and Boogaard, A.H. van den and Huetink, J. and Habbal, A. (2006) A comparison between optimisation algorithms for metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 883-886).

Boogaard, A.H. van den and Huetink, J. (2006) Simulation of aluminium sheet forming at elevated temperatures. Computer Methods in Applied Mechanics and Engineering, 195 (48-49). pp. 6691-6709. ISSN 0045-7825

Kurukuri, S. and Boogaard, A.H. van den and Huetink, J. (2006) Simulation of thermo-mechanical aluminium sheet formming [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Non-proportional tension-shear experiments in a biaxial test facility. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 323-326).

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Constitutive Behaviour in Strain Path Sensitive Sheet Metal [em poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Strain path sensitivity in DC06 mild steel [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Vegter, H. and Horn, Carel H.L.J. ten and An, Y. and Atzema, E.H. and Pijlman, H.H. and Boogaard, A.H. van den and Huetink, J. (2006) Comportamento pl'astico do material: um dado importante para prever a estampagem de chapas. Corte & conformacao de metais, 12 . pp. 50-69. ISSN 1808-351X

Vegter, H. and Boogaard, A.H. van den (2006) A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states. International Journal of Plasticity, 22 (3). pp. 557-580. ISSN 0749-6419

2005

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Metamodelling techniques for the optimisation of metal forming processes. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Solving optimisation problems in metal forming using Finite Element simulation and metamodelling techniques. In: Apomat conference, 2005, Morschach, Switzerland.

Boogaard, A.H. van den (2005) Modelling of localised necking in thermo-mechanical sheet metal forming. In: Euromech Colloquium 474: Material Instabilities in Coupled Problems, August 30-31, 2005, Troyes, France.

Boogaard, A.H. van den and Riel, M. van and Huetink, J. (2005) Evaluation of stresses in a combined plane strain-simple shear test. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

Boogaard, A.H. van den and Wisselink, H.H. and Huetink, J. (2005) Do Advanced Material Models Contribute to Accuracy in Industrial Sheet Forming Simulations? Advanced Materials Research, 6-8 . pp. 71-80. ISSN 1662-8985

Wisselink, H.H. and Boogaard, A.H. van den (2005) Finite Element Simulation of the Stretch-Forming of Aircraft Skins. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

2004

Boogaard, A.H. van den and Huetink, J. (2004) Modelling of aluminium sheet forming at elevated temperatures. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Boogaard, A.H. van den and Kelder, M.H. (2004) Simulation of hydro-formability testing for tubes. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004, Trondheim, Norway.

Haaren, L. and Boogaard, A.H. van den and Huetink, J. (2004) Modelling of aluminium sheet material at elevated temperatures. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004, Trondheim, Norway.

2003

Bolt, P.J. and Werkhoven, R.J. and Boogaard, A.H. van den (2003) Warm Deep Drawing of Aluminium Sheet. In: Shemet 2003, 2003.

Boogaard, A.H. van den and Bolt, P.J. (2003) A material model for warm forming of aluminium sheet. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Boogaard, A.H. van den and Huetink, J. (2003) Prediction of sheet necking with shell finite element models. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Boogaard, A.H. van den and Meinders, T. and Huetink, J. (2003) Efficient implicit finite element analysis of sheet forming processes. International Journal for Numerical Methods in Engineering, 56 (8). pp. 1083-1107. ISSN 0029-5981

Boogaard, A.H. van den and Meinders, T. and Huetink, J. (2003) Efficient implicit FEM simulation of sheet metal forming. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Improvement of implicit finite element code performance in deep drawing simulations by dynamics contributions. Journal of Materials Processing Technology, 134 (3). pp. 413-420. ISSN 0924-0136

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Advanced sheet metal forming. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Selman, A. and Atzema, E. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Wrinkling in sheet metal forming: experimental testing vs. numerical analysis. International journal of forming processes, 6 (2). pp. 147-160. ISSN 1292-7775

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Adaptive numerical analysis of wrinkling in sheet metal forming. International journal of forming processes, 6 (1). pp. 87-102. ISSN 1292-7775

Vegter, H. and Horn, Carel H.L.J. ten and An, Yuguo and Atzema, Eisso H. and Pijlman, Hermen H. and Boogaard, Ton H. van den and Huetink, Han (2003) Characterisation and modelling of the plastic material behaviour and its application in sheet metal forming simulation. In: COMPLAS VII, 7th International Conference on Computational Plasticity, April 7-10, 2003, Barcelona, Spain.

2002

Boogaard, A.H. van den (2002) Thermally Enhanced Forming of Aluminium Sheet. Modelling and experiments. thesis.

Boogaard, A.H. van den and Bolt, P.J. and Werkhoven, R.J. and Hout, M.H.F.M. van (2002) Aluminium sheet forming simulations: influence of the yield surface. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2002) An algorithm to make your implicit code competitive with an explicit code for large scale problems. In: NUMISHEET 2002, 2002.

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2002) On adaptive mesh refinement in wrinkling prediction analysis. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Selman, A. and Meinders, T. and Huetink, J. and Boogaard, A.H. van den (2002) Comprehensive adaptive mesh refinement in wrinkling prediction analysis. In: International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2002, 21-25/10/2002, Science Town, Taejon, Korea.

2001

Bolt, P.J. and Werkhoven, R.J. and Boogaard, A.H. van den (2001) Effect of elevated temperatures on the drawability of aluminium sheet components. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Boogaard, A. van den and Bolt, P. and Werkhoven, R. (2001) Modeling of AlMg Sheet Forming at Elevated Temperatures. International journal of forming processes, 4 (3-4). pp. 361-375. ISSN 1292-7775

Boogaard, A.H. van den and Bolt, P.J. and Werkhoven, R.J. (2001) Aluminium sheet forming at elevated temperatures. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Boogaard, A.H. van den and Werkhoven, R.J. and Bolt, P.J. (2001) A material model for aluminium sheet forming at elevated temperatures. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Kloosterman, G. and Damme, R.M.J. van and Boogaard, A.H. van den and Huetink, J. (2001) A geometrical-based contact algorithm using a barrier method. International Journal for Numerical Methods in Engineering, 51 (7). pp. 865-882. ISSN 0029-5981

Kloosterman, G. and Boogaard, A.H. van den and Huetink, J. (2001) A modified barrier approach to contact problems. In: 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan (pp. 97 - 102).

Lof, J. and Boogaard, A.H. van den (2001) Adaptive return mapping algorithms for J2 elasto-viscoplastic flow. International Journal for Numerical Methods in Engineering, 51 (11). pp. 1283-1298. ISSN 0029-5981

2000

Boogaard, A.H. van den and Pijlman, H.H. and Huetink, J. (2000) Anisotropic yield functions in a co-rotating reference frame. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Haaren, M.J. van and Stoker, H.C. and Boogaard, A.H. van den and Huetink, J. (2000) The ALE-method with triangular elements: direct convection of integration point values. International Journal for Numerical Methods in Engineering, 49 (5). pp. 697-720. ISSN 0029-5981

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2000) Improvements in FE-analysis of real-life sheet metal forming. In: European Congress on Computational Methods in Applied Science and Engineering, ECCOMAS 2000, 11-14 September 2000, Barcelona.

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, V.T. (2000) Numerical and physical modelling in forming. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Selman, A. and Huetink, J. and Boogaard, A.H. van den (2000) Error estimation for thin sheet metal forming processes. [Report]

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2000) Wrinkling prediction with adaptive mesh refinement. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

1999

Haaren, M.J. van and Boogaard, A.H. van den and Stoker, H.C. and Huetink, J. (1999) The arbitrary Lagrangian-Eulerian method on grids of triangular elements: a new convection scheme. In: Second ESAFORM Conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

Huetink, J. and Boogaard, A.H. van den and Rietman, A.D. and Lof, J. and Meinders, T. (1999) A mixed elastoplastic/rigid-plastic material model. International Journal for Numerical Methods in Engineering, 46 (9). pp. 1421-1434. ISSN 0029-5981

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (1999) A mixed elastoplastic / rigid plastic material model. In: Numisheet conference, 1999.

1998

Boogaard, A.H. van den and Rietman, A.D. and Huetink, J. (1998) Iterative solvers in forming process simulations. In: 6th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede, the Netherlands.

Boogaard, A.H. van den and Vliet, N. van and Huetink, J. (1998) Object oriented design of a thermo-mechanical FEM code. In: World Conference on Computational Mechanics , 1998.

Cornelissen, E.R. and Boogaard, Th. van den and Strathmann, H. (1998) Physicochemical aspects of polymer selection for ultrafiltration and microfiltration membranes. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 138 (2-3). pp. 283-289. ISSN 0927-7757

Huetink, J. and Boogaard, A.H. van den and Rietman, A.D. and Lof, J. and Meinders, T. (1998) A mixed elastoplastic / rigid-plastic material model. In: Fourth World Congress on Computational Mechanics, WCCM IV, 29 June - 2 July 1998, Buenos Aires, Argentina.

Moesdijk, R.D. van de and Wisselink, H.H. and Boogaard, A.H. van den and Huetink, J. and Bolt, P.J. and Sillekens, W.H. (1998) Blanking by means of the finite element method. In: IACM Conference, 1998.

Sluys, L.J. and Geers, M.D.G. and Boogaard, A.H. van den (1998) New Trends in the Modelling of Material Nonlinearities. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

This list was generated on Thu Aug 21 05:28:20 2014 CEST.