Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Jump to: 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000
Number of items: 144.

2014

Arora, V. and Wijnant, Y.H. and Boer, A. de (2014) Acoustic-based damage detection method. Applied acoustics, 80 . 23 - 27. ISSN 0003-682X

Jong, J.A. de and Wijnant, Y.H. and Boer, A. de (2014) A one-dimensional heat transfer model for parallel-plate thermoacoustic heat exchangers. Journal of the Acoustical Society of America, 135 . 1149 - 1158. ISSN 0001-4966

2013

Akcay-Perdahcioglu, D. and Doreille, M. and Boer, A. de and Ludwig, T. (2013) Coupling of non-conforming meshes in a component mode synthesis method. International journal for numerical methods in engineering, 96 (6). 390 - 404. ISSN 0029-5981

Altunlu, A.C. and Hoogt, P.J.M. van der and Boer, A. de (2013) Sensitivity of combustion driven structural dynamics and damage to thermo-acoustic instability: Combustion-acoustics-vibration. Journal of engineering for gas turbines and power, 136 (5). ISSN 0742-4795

Bekke, Dirk and Wijnant, Ysbrand and Weegerink, Thijs and Boer, Andre de (2013) Tire-road noise: an experimental study of tire and road design parameters. In: The 42nd International Congress and Exposition on Noise Control Engineering, Internoise 2013, 15-09-2013 - 18-09-2013, Innsbruck (pp. 564 - 570).

Boer, A. de and Schutte, J.H. (2013) Numerical Simulation of Tyre Road Noise. In: Workshop 'Granular Matter in (zero) Gravity', 2 April 2013, Koln.

Dikmen, Emre and Hoogt, Peter J.M. van der and Boer, André de and Aarts, Ronald G.K.M. and Jonker, Ben (2013) Flow Induced Instability on High Speed Mini Rotors in Laminar Flow. Journal of Vibration and Acoustics, 135 (2). 024502-1. ISSN 1048-9002

Jong, J.A. de and Wijnant, Y.H. and Boer, A. de (2013) Finite element simulation of a two-dimensional standing wave thermoacoustic engine. In: ICA 2013, 02-06-2013, Montréal (pp. 1 - 7).

Jong, Jan A. de and Wijnant, Ysbrand H. and Boer, André de (2013) Determination of the stability limit of a thermoacoustic engine by means of finite elements. In: AIA-DAGA 2013 Conference on Acoustics, 18-03-2013 - 21-03-2013, Merano (pp. 1553 - 1556).

Kuipers, E.R. and Wijnant, Y.H. and Jong, J.A. de and Boer, A. de (2013) Het dak eraf. .

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2013) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: New Trends in Smart Technologies. Fraunhofer Verlag, Stuttgart, 99 - 108. ISBN 9783839605776

Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Boer, A. de (2013) Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure. In: 9th International Workshop on Structural Health Monitoring, IWSHM 2013: A roadmap to intelligent structures, 10-12 September 2013, Lancaster, PA, USA (pp. 445 - 453).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de (2013) Actuator voor helikopterflaps. Technisch weekblad, 2013 .

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2013) Geometrical optimization of a hingeless deployment system for an active rotor blade. Journal of intelligent material systems and structures, 24 (7). 855 - 861. ISSN 1530-8138

Paternoster, A.R.A. and Loendersloot, R. and Warnet, L. and Boer, A. de and Akkerman, R. (2013) Engineers in a flap over rotor blades. Flight International . 24 - 24. ISSN 0015-3710

Ridder, L. van de and Hakvoort, W.B.J. and Dijk, J. van and Lötters, J.C. and Boer, A. de (2013) Quantitative estimation of the influence of external vibrations on the measurement error of a coriolis mass-flow meter. In: 11th International Conference on Vibration Problems, ICOVP 2013), 9-12 September 2013, Lisbon, Portugal.

Wijker, J.J. and Ellenbroek, M.H.M. and Boer, A. de (2013) Characterization and synthesis of random acceleration vibration specifications. In: COMPDYN 2013, 12-06-2013 - 14-06-2013, Kos Island, Greece (pp. 1 - 30).

Wijnant, Y.H. and Boer, A. de (2013) Nieuw betonblok maakt uitwijken in berm ongehoord stil. Dagblad TCTubantia .

2012

Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Ellenbroek, M.H.M. and Boer, A. de (2012) Dynamic substructuring and reanalysis methods in a surrogate based design optimization environment. Structural and multidisciplinary optimization, 45 . 129 - 138. ISSN 1615-147X

Altunlu, A.C. and Hoogt, P.J.M. van der and Boer, A. de (2012) Accelerated life consumption due to thermo-acoustic oscillations in gas turbines: XFEM & Crack. In: 28th Congress of the International Council of the Aeronautical Sciences (ICAS 2012), 2012-09-23 - 2012-09-28, Brisbane, Australia (pp. 4.2.2 - ).

Engelen, S.J.P.M. van and Ellenbroek, M.H.M. and Royen, B.J. van and Boer, A. de and Dieën, J.H. van (2012) Validation of vibration testing for the assessment of the mechanical properties of human lumbar motion segments. Journal of biomechanics, 45 (10). 1753 - 1758. ISSN 0021-9290

Jong, P.H. de and Boer, A. de and Loendersloot, R. and Hoogt, P.J.M. van der (2012) Power harvesting in a helicopter rotor using a piezo stack in the lag damper. Journal of intelligent material systems and structures, 24 (11). 1392 - 1404. ISSN 1530-8138

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2012) Lab-scale experimental validation of a piezoelectric energy harvesting lag damper. In: 38th European Rotocraft Forum, ERF 2012, 4-7 September 2012, Amsterdam (pp. 1 - 8).

Kuipers, E.R. and Wijnant, Y.H. and Boer, A. de (2012) In situ sound absorption measurement: investigations on oblique incidence. In: DAGA 2012 Darmstadt, 2012-03-19 - 2012-03-22, Berlin (pp. 351 - 352).

Ooijevaar, T.H. and Warnet, L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2012) Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors. In: Sixth European Workshop on Structural Health Monitoring, 3-6 July 2012, Germany (pp. 232 - 239).

Paternoster, A.R.A. and Jong, P.H. de and Boer, A. de (2012) Piezoelectric energy conversions. In: The Power of Design, Product Innovation in Sustainable Energy Technologies. John Wiley, 218 - 228.

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Simulation of Flexible Mechanisms in a Rotating Blade for Smart-Blade Applications. In: European Rotorcraft Forum, 4-7 September 2012, Amsterdam (pp. 1 - 8).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2012) Smart actuation for helicopter rotorblades. In: Smart actuation and sensing systems - Recent advances and future challenges. Intech open, 657 - 678. ISBN 9789535107989

Schutte, J.H. and Verhulp, E. and Wijnant, Y.H. and Boer, A. de (2012) Simulation of tyre/road noise by means of a FEM/BEM approach. In: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria (pp. 1 - 10).

Wit, A.J. de and Akcay-Perdahcioglu, D. and Brink, W.M. van den and Boer, A. de (2012) Generic Linking of Finite Element Models for non-linear static and global dynamic analyses of aircraft structures. Computers, materials & continua, 32 (3). 201 - 218. ISSN 1546-2226

2011

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Geijselaers, H.J.M. and Boer, A. de (2011) Updating the Craig–Bampton reduction basis for efficient structural reanalysis. International Journal for Numerical Methods in Engineering, 85 (5). pp. 607-624. ISSN 0029-5981

Altunlu, A. Can and Hoogt, Peter van der and Boer, André de (2011) Life assessment by fracture mechanics analysis and damage monitoring technique on combustion liners. In: ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada.

Altunlu, A. Can and Hoogt, Peter van der and Boer, André de (2011) Sensitivity of combustion driven damage mechanisms to instability. In: 18th International Congress on Sound and Vibration, ICSV 2011, 10-14 July 2011, Rio de Janeiro, Brazil.

Arora, Vikas and Hoogt, P.J.M. van der and Aarts, R.G.K.M. and Boer, A. de (2011) Identification of stiffness and damping characteristics of axial air-foil bearings. International Journal of Mechanics and Materials in Design . ISSN 1569-1713

De Guido, S. and Akcay-Perdahcioglu, D. and Geijselaers, H.J.M. and Boer, A. de (2011) On a novel approach for optimizing composite materials panel using surrogate models. In: 3rd ECCOMAS Thematic Conference on Mechanical Response of Composites 2011, 21-23 September 2011, Hannover, Germany (pp. 439 - 446).

De Guido, S. and Geijselaers, H.J.M. and Boer, A. de (2011) Mixed continuous-discrete variable optimization of composite panels using surrogate models. In: SAMPE Benelux Student Seminar, January 10-11, 2011, Ghent University & Acrosoma, Belgium.

De Guido, Samuele and Geijselaers, H.J.M. and Boer, André de (2011) Continuous-discrete variable optimization on composites using kriging surrogate model. In: 16th International Conference on Composite Structures, ICCS 2011, 28-30 June 2011, Porto, Portugal.

Dikmen, Emre and Hoogt, Peter J.M. van der and Boer, André de and Aarts, Ronald G.K.M. and Jonker, Ben (2011) Design of an Experimental Setup for Testing Multiphysical Effects on High Speed Mini Rotors. Jounal of Mechanical Design, 133 (5). ISSN 1050-0472

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2011) Power harvesting in a helicopter lag damper. In: SMART'11, July 6-8, 2011, Saarbrucken, Germany.

Jong, P.H. de and Loendersloot, R. and Boer, A. de and Hoogt, P.J.M. van der (2011) Power harvesting in a helicopter lag damper. In: 37th European Rotorcraft Forum, September 13-15, 2011, Ticino Park, Milan, Italy (pp. 1185 - 1192).

Kampinga, W.R. and Wijnant, Y.H. and Boer, A. de (2011) An efficient finite element model for viscothermal acoustics. Acta Acustica United with Acustica, 97 (4). 618 - 631. ISSN 1610-1928

Kuipers, Erwin and Wijnant, Ysbrand and Boer, André de (2011) Theory and application of a new method for the in-situ measurement of sound absorption. In: 37th annual conference for acoustics in Dusseldorf, DAGA 2011, 21-24 March 2011, Dusseldorf.

Loendersloot, R. and Ooijevaar, T.H. and Boer, A. de and Akkerman, R. (2011) Development of a Damage Quantification Model for Composite Skin-Stiffener Structures. In: SMART'11, July 6-8, 2011, Saarbrucken, Germany (pp. 197 - 212).

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2011) Vibration based structural health monitoring and the modal strain energy damage index algorithm applied to a composite T-beam. In: Vibration and Structural Acoustics Analysis : Current Research and Related Technologies. Springer Netherlands, pp. 121-150. ISBN 9789400717022

Ooijevaar, T.H. and Grooteman, F.P. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2011) Dynamic characterisation of a damaged composite structure with stiffeners employing fibre bragg gratigns. In: 5th International Conference on Composites Testing and Model Simulation, CompTest 2011, February 14-16, 2011, Lausanne, Switzerland.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Akkerman, R. and Boer, A. de (2011) Structural Health Monitoring of an Advanced Composite Aircraft Structure Using a Modal Approach. In: 8th International Workshop on Structural Health Monitoring 2011, September 13-15, 2011, Stanford, CA, USA (pp. 1053 - 1062).

Paternoster, A.R.A. and Loendersloot, R. and Boer, A. de and Akkerman, R. (2011) Geometric optimisation of a gurney flap henge-less deployment system for a helicopter model blade. In: European Rotorcraft Forum, Milaan, Italy.

Paternoster, Alexandre and Loendersloot, Richard and Boer, André de and Akkerman, Remko (2011) Geometric Optimisation of Hinge-less Deployment System for an Active Rotorblade. In: ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011, September 18-21, 2011, Scottsdale, AZ, USA.

Wit, A.J. de and Akcay Perdahcioglu, D. and Brink, W.M. van den and Boer, A. de (2011) Generic linking of finite element models for non-linear static and global dynamic analyses for aircraft structures. In: 3rd ECCOMAS Thematic Conference on Mechanical Response of Composites 2011, 21-23 September 2011, Hannover, Germany.

2010

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Boer, A. de (2010) On the coupling of reanalysis techniques with a surrogate-based design optimization method. In: 27th international congress of the Aeronautical Sciences, ICAS, 19-24 Sept. 2010, Nice, France.

Altunlu, A. Can and Hoogt, Peter van der and Boer, André de (2010) Damage evolution by using the near-tip fields of a crack in gas turbine liners. In: 17th International Congress on Sound & Vibration, ICSV 17, July 18-22, 2010, Cairo, Egypt.

Arora, V. and Hoogt, P.J.M. van der and Aarts, R.G.K.M. and Boer, A. de (2010) Identification of dynamic properties of radial air-foil bearings. International Journal of Mechanics and Materials in Design, 6 (4). pp. 305-318. ISSN 1569-1713

Bekke, D.A. and Wijnant, Y.H. and Boer, A. de (2010) Experimental review on interior tire-road noise models. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium.

Bekke, D.A. and Wijnant, Y.H. and Boer, A. de (2010) Modelling and evaluating interior tire-road noise. NAG Journaal, 9 . ISSN 1571-4233

Bor, T.C. and Warnet, L. and Akkerman, R. and Boer, A. de (2010) Modeling of Stress Development During Thermal Damage Healing in Fiber-reinforced Composite Materials Containing Embedded Shape Memory Alloy Wires. Journal of Composite Materials, 44 (22). 2547 - 2572. ISSN 0021-9983

Dikmen, Emre and Hoogt, Peter J.M. van der and Boer, André de and Aarts, Ronald G.K.M. (2010) Influence of Multiphysical Effects on the Dynamics of High Speed Minirotors—Part I: Theory. Journal of Vibration and Acoustics, 132 (3). 031010. ISSN 1048-9002

Dikmen, Emre and Hoogt, Peter J.M. van der and Boer, André de and Aarts, Ronald G.K.M. (2010) Influence of Multiphysical Effects on the Dynamics of the High Speed Mini Rotors—Part II: Results. Journal of Vibration and Acoustics, 132 (3). 030111. ISSN 1048-9002

Jong, P.H. de and Boer, A. de and Loendersloot, R. and Hoogt, P.J.M. van der (2010) Power harvesting using piezomaterial in a helicopter rotor blade. In: 17th International Congress on Sound & Vibration, ICSV, 18-22 July, 2010, Cairo, Egypt.

Kampinga, W.R. and Wijnant, Y.H. and Boer, A. de (2010) Performance of several viscothermal acoustic finite elements. Acta Acustica United with Acustica, 96 (1). 115 - 124. ISSN 1610-1928

Loendersloot, R. and Ooijevaar, T.H. and Warnet, L. and Boer, A. de and Akkerman, R. (2010) Vibration based structural health monitoring of a composite plate with stiffeners. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium (pp. 909 - 924).

Loendersloot, Richard and Grouve, Wouter J.B. and Akkerman, Remko and Boer, André de (2010) Development of a multigrid finite difference solver for benchmark permeability analysis. In: 10th International Conference on Flow Processes in Composite Materials, FPCM 2010, July 11-15, 2010, Ascona, Switserland.

Noordermeer, J.W.M. and Boer, A. de and Huerne, H.L. ter and Schipper, D.J. and Meinders, V.T. (2010) Beïnvloeden bandeigenschappen de schade-ontwikkeling van de weg. In: CROW Infradagen 2010, 23-24 Juni 2010, Papendal, Netherlands.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2010) Vibration based Structural Health Monitoring of a composite T-beam. Composite Structures, 92 (9). pp. 2007-2015. ISSN 0263-8223

Ooijevaar, T.H. and Warnet, L.L. and Loendersloot, R. and Akkerman, R. and Boer, A. de (2010) Vibration based Structural Health Monitoring of a Composite Plate Structure with Multiple Stiffeners. In: Fifth European Workshop on Structural Health Monitoring, June 28 - July 4, 2010, Sorrento, Naples, Italy.

Paternoster, Alexandre and Boer, André de and Loendersloot, Richard and Akkerman, Remko (2010) Actuators for smart applications. In: ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2010-3905, September 28 - October 1, 2010, Philadelphia, Pennsylvania.

Schutte, J.H. and Dannenberg, J.F. and Wijnant, Y.H. and Boer, A. de (2010) An implicit and explicit solver for contact problems. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September, 2010, Leuven, Belgium.

Wijnant, Y.H. and Kuipers, E.R. and Boer, A. de (2010) Development and application of a new method for the in-situ measurement of sound absorption. In: International Conference on Noise and Vibration Engineering, ISMA 2010, 20-22 September 2010, Leuven, Belgiuim.

Wind, J.W. and Boer, A. de and Ellenbroek, M.H.M. (2010) An efficient planar inverse acoustic method based on Toeplitz matrices. Acta Acustica United with Acustica, 97 (1). pp. 128-137. ISSN 1610-1928

2009

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Boer, A. de (2009) A Hybrid Design Optimization Method using Enriched Craig-Bampton Approach. In: 16th International Congress on Sound and Vibration, ICSV, July 5-9, 2009, Kraków, Poland.

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Hoogt, P.J.M. van der and Boer, A. de (2009) An optimization method for dynamics of structures with repetitive component patterns. Structural and Multidisciplinary Optimization, 39 (6). 557 - 567. ISSN 1615-147X

Dikmen, Emre and Hoogt, Peter van der and Boer, André de and Aarts, Ronald and Jonker, Ben (2009) A flexible rotor on flexible supports: modeling & experiments. In: ASME 2009 International Mechanical Engineering Congress & Exposition IMECE 2009, November 13-19, Lake Buena Vista, Florida, USA.

Dikmen, Emre and Hoogt, Peter van der and Boer, André de and Aarts, Ronald and Jonker, Ben (2009) Thermal modeling of a mini rotor-stator system. In: ASME 2009 International Mechanical Engineering Congress & Exposition IMECE 2009, November 13-19, Lake Buena Vista, Florida, USA.

Kampinga, Ronald and Wijnant, Ysbrand and Boer, André de (2009) A two step viscothermal acoustic FE method. In: International Congress on Sound and Vibration, ICSV 16, 5-9 July 2009, Kraków, Poland.

Loendersloot, Richard and Ooijevaar, Ted and Warnet, Laurent and Akkerman, Remko and Boer, André de (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: Integrity Failure and Reliability - 3, 20-24 July 2009, Porto, Portugal.

Ooijevaar, T.H. and Loendersloot, R. and Warnet, L.L. and Boer, A. de and Akkerman, R. (2009) Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method. In: 15th International Conference on Composite Structures, ICCS, 15-17 June 2009, Porto, Portugal.

Paternoster, A.R.A. and Boer, A. de and Akkerman, R. (2009) Actuator review for smart rotor blades. [Report]

Paternoster, A.R.A. and Boer, A. de and Akkerman, R. (2009) Piezo-Actuators for Gurney flap concept. [Report]

Paternoster, A.R.A. and Boer, A. de and Akkerman, R. (2009) Piezo-Actuators for Synthetic-Jets. [Report]

Reinders, A.H.M.E. and Wit, H. de and Boer, A. de (2009) Design of fibre reinforced PV concepts for building integrated applications. In: 24th EU PVSEC, 21-25 September 2009, Hamburg (pp. pp. 3940-3944).

Reinders, Angele and Boer, André de and Winter, Arjan de and Haverlag, Marco (2009) Designing PV powered LED products - integration of PV technology in innovative products. In: 24th EU PVSEC, 21-25 September 2009, Hamburg (pp. pp. 3179-3183).

Wijnant, Y.H. and Schutte, J.H. and Boer, A. de (2009) On solving the tyre-road contact problem at high frequencies. In: NAG-DAGA International Conference on Acoustics, March 23-26, 2009, Rotterdam, the Netherlands.

2008

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Hoogt, P.J.M. van der and Boer, A. de (2008) Design Optimization Utilizing Dynamic Substructuring and Artificial Intelligence Techniques. In: 26th International Modal Analysis Conference, IMAC-XXVI: A Conference & Exposition on Structural Dynamics, February 4-7, 2008, Orlando, Florida, US.

Akcay Perdahcioglu, D. and Ellenbroek, M.H.M. and Hoogt, P.J.M. van der and Boer, A. de (2008) Design optimization of structures including repetitive patterns. In: International Conference on Engineering Optimization, EngOpt 2008, June 1-5, 2008, Rio de Janeiro, Brazil.

Boer, A. de and Huerne, H.L. ter and Noordermeer, J.W.M. and Schipper, D.J. (2008) Band - Weg interactie. In: CROW Infradagen 2008. CROW.

Grouve, W.J.B. and Warnet, L. and Boer, A. de and Akkerman, R. and Vlekken, J. (2008) Delamination detection with fibre Bragg gratings based on dynamic behaviour. Composites Science and Technology, 68 (12). pp. 2418-2424. ISSN 0266-3538

Huls, R.A. and Kampen, J.F. van and Hoogt, P.J.M. van der and Kok, J.B.W. and Boer, A. de (2008) Acoustoelastic Interaction in Combustion Chambers: Modeling and Experiments. Journal of Engineering for Gas Turbines and Power, 130 (5). 051505. ISSN 0742-4795

Kampinga, W.R. and Wijnant, Y.H. and Boer, A. de (2008) Analysetools voor akoestiek in zeer kleine geometrieën = Tools for acoustic analysis of very small geometries. NAG Journaal (186). ISSN 1571-4233

Kampinga, W.R. and Wijnant, Y.H. and Boer, A. de (2008) A finite element for viscothermal wave propagation. In: ISMA2008, International Conference on Noise and Vibration Engineering, September 15-17, 2008, Leuven, Belgium (pp. pp. 4271-4278).

Sloetjes, P.J. and Boer, A. de (2008) Vibration Reduction and Power Generation with Piezoceramic Sheets Mounted to a Flexible Shaft. Journal of Intelligent Material Systems and Structures, 19 (1). pp. 25-34. ISSN 1045-389X

2007

Akcay Perdahcioglu, Didem and Boer, André de and Hoogt, Peter J.M. van der (2007) Design optimization applied in structural dynamics. In: First International Conference on Artificial Intelligence for Industrial Applications, 19-23 February 2007, Ostravice, Czech Republic (pp. pp. 45-51).

Bonte, M.H.A. and Boer, A. de and Liebregts, R. (2007) Determining the von Mises stress power spectral density for frequency domain fatigue analysis including out-of-phase stress components. Journal of Sound and Vibration, 302 (1-2). pp. 379-386. ISSN 0022-460X

Huls, R.A. and Sengissen, A.X. and Hoogt, P.J.M. van der and Kok, J.B.W. and Poinsot, T. and Boer, A. de (2007) Vibration prediction in combustion chambers by coupling finite elements and large eddy simulations. Journal of Sound and Vibration, 304 (1-2). pp. 224-229. ISSN 0022-460X

Kampinga, W.R. and Bosschaart, C. and Wijnant, Y.H. and Boer, A. de (2007) The coupling of a hearing aid loudspeaker membrane to visco-thermal air layers. In: Fourteenth International Congress on Sound and Vibration, ICSV14, 9-12 July, 2007, Cairns, Australia.

Nijhof, M.J.J. and Wijnant, Y.H. and Boer, A. de (2007) An acoustic finite element including viscothermal effects. In: Fourteenth International Congress on Sound and Vibration, ICSV14, 9-12 July, 2007, Cairns, Australia.

Sloetjes, Peter and Boer, André de and Hoogt, Peter van der (2007) Dynamics of piezoceramics-based mass and force actuators for rotating machines. In: Fourteenth International Congress on Sound and Vibration, ICSV14, 9-12 July, 2007, Cairns, Australia.

Wind, J.W. and Akçay Perdahcıoğlu, D. and Boer, A. de (2007) Distributed multilevel optimization for complex structures. Structural and Multidisciplinary Optimization, 36 (1). pp. 71-81. ISSN 1615-147X

Wind, J.W. and Philippens, D.R. and Boer, A. de (2007) Near Source Acoustical Particle Velocity Measurements with Ambient Noise. In: 25th International Modal Analysis Conference, IMAC-XXV, February 19-22, 2007, Orlando, FLorida, US.

Wolbert, A.G.M. and Hoogt, P.J.M. van der and Lok, Z.A.J. and Boer, A. de (2007) Succesful teaching of experimental vibration research. In: Fourteenth International Congress on Sound and Vibration, ICSV14, 9-12 July, 2007, Cairns, Australia.

2006

Hannink, M.H.C. and Spiering, R.M.E.J. and Wijnant, Y.H. and Boer, A. de (2006) A finite element approach to the prediction of sound transmission through panels with acoustic resonators. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Kampinga, Ronald and Wijnant, Ysbrand and Boer, André de (2006) Viscothermal wave propagation in a circular layer with a partially open and partially closed boundary. In: International Conference on Noise and Vibration Engineering, ISMA, 18-20 September 2006, Leuven, Belgium (pp. pp. 4617-4626).

Nijhof, M.J.J. and Wijnant, Y.H. and Boer, A. de (2006) Elliptical side resonators for broadband noise reduction: theory and experiments. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Oosterhuis, Ekke J. and Eidhof, Wouter B. and Hoogt, Peter J.M. van der and Boer, André de (2006) Force prediction via the inverse FRF using experimental and numerical data from a demonstrator with tuneable nonlinearities. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Sloetjes, P.J. and Boer, A. de (2006) Piezoceramics-based Devices for Active Balancing of Flexible Shafts. In: International Conference on Noise and Vibration Engineering, ISMA, 18-20 September 2006, Leuven, Belgium (pp. pp. 543-556).

Wijnant, Ysbrand and Spiering, Ruud and Blijderveen, Maarten van and Boer, André de (2006) A semi-analytical solution for viscothermal wave propagation in narrow gaps with arbitrary boundary conditions. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

Wijnant, Y.H. and Boer, A. de (2006) A new approach to model tyre/road contact. In: International Conference on Noise and Vibration Engineering, ISMA, 18-20 September 2006, Leuven, Belgium (pp. pp. 4453-4462).

Wind, J.W. and Wijnant, Y.H. and Boer, A. de (2006) Fast evaluation of the Rayleigh integral and applications to inverse acoustics. In: Thirteenth International Congress on Sound and Vibration, ICSV 13, July 2-6, 2006, Vienna, Austria.

2005

Eger, A.O. and Boer, A. de (2005) Emerging technology design; A new master course aimed at bringing emerging technologies its break through applications. In: Crossing Design Boundaries: Proceedings of the 3rd Engineering & Product Design Education International Conference, 15-16 September 2005, Edinburg. Taylor & Francis, London, pp. 121-126. ISBN 9780415391184

Hannink, M.H.C. and Vlasma, J.P. and Wijnant, Y.H. and Boer, A. de (2005) Application of acoustically tuned resonators for the improvement of sound insulation in aircraft. In: 34th International Congress and Exposition on Noise Control Engineering, InterNoise, August 7-10, 2005, Rio de Janeiro, Brazil.

Huls, Rob and Boer, André de and Kok, Jim and Hoogt, Peter van der (2005) Experimental validation of the interaction between combustion and structural vibration. In: Twelfth International Congress on Sound and Vibration, ICSV, July 11-14, 2005, Lisbon, Portugal.

Nijhof, Marten and Beltman, Marco and Wijnant, Ysbrand and Boer, André de (2005) Acoustic modeling of fan noise generation and scattering in a modular duct system. In: Twelfth International Congress on Sound and Vibration, ICSV, July 11-14, 2005, Lisbon, Portugal.

2004

Beijers, Clemens and Noordman, Bram and Boer, André de (2004) Numerical Modelling of Rubber Vibration Isolators: identification of material parameters. In: Eleventh International Congress on Sound and Vibration, ICSV 11, 5-8 Jul 2004, St. Petersburg, Russia (pp. pp. 3193-3200).

Beijers, C.A.J. and Basten, T.G.H. and Brink, D.R. van den and Verheij, J.W. and Boer, A. de (2004) Near-source error sensor strategies for active vibration isolation of machines. In: International Conference on Noise and Vibration Engineering, ISMA 2004, 20-22 September 2004, Leuven, Belgium (pp. pp. 141-156).

Bonte, M.H.A. and Boer, A. de and Liebregts, R. (2004) Prediction of mechanical fatigue caused by multiple random excitations. In: International Conference on Noise and Vibration Engineering, ISMA, 20-22 September 2004, Leuven, Belgium (pp. pp. 697-708).

Hannink, M.H.C. and Wijnant, Y.H. and Boer, A. de (2004) Optimised Sound Absorbing Trim Panels for the Reduction of Aircraft Cabin Noise. In: Eleventh International Congress on Sound and Vibration, ICSV 11, July 5-8, 2004, St. Petersburg, Russia (pp. pp. 1855-1862).

Hannink, M.H.C. and Wijnant, Y.H. and Boer, A. de (2004) Experimental Validation of an Optimised Resonator Configuration for Sound Absorption [Poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Huls, R.A. and Boer, A. de (2004) Experimental Validation of Acousto-Elastic Interaction in a Combustion Setup [Poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

Huls, Rob and Boer, André de and Kok, Jim (2004) A Transfer Function Approach to Structural Vibrations Induced by Thermoacoustic Sources. In: Eleventh International Congress on Sound and Vibration, ICSV 11, July 5-8, 2004, St. Petersburg, Russia (pp. pp. 3485-3492).

Nijhof, M.J.J. and Wijnant, Y.H. and Boer, A. de and Beltman, W.M. (2004) Reduction of fan noise bymeans of (circular) side-resonators; theory and experiment. In: International Conference on Noise and Vibration Engineering, ISMA, 20-22 September 2004, Leuven, Belgium (pp. pp. 403-416).

Oosterhuis, E.J. and Hoogt, P.J.M. van der and Boer, A. de (2004) Inverse Analysis of Dynamic Systems [Poster]. In: Seventh Engineering Mechanics Symposium, 22-23 November 2004, Rolduc, Kerkrade, The Netherlands.

2003

Beijers, C.A.J. and Boer, A. de (2003) Near-source sensor strategies for active isolation [Poster]. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Beijers, Clemens A.J. and Boer, André de (2003) Numerical modelling of rubber vibration isolators. In: Proceedings of the Tenth International Congress on Sound and Vibration. KTH, Stockholm, pp. 805-812. ISBN 9780854327898

Hannink, M.H.C. and Wijnant, Y.H. and Boer, A. de (2003) Optimised sound absorbing panels with quarter-wave resonators [Poster]. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Huls, R.A. and Kok, J.B.W. and Boer, A. de (2003) Coupled model of gas turbine vibrations [Poster]. In: Sixth Engineering Mechanics Symposium, 24-25 November 2003, Rolduc, Kerkrade, The Netherlands.

Huls, Rob A. and Kampen, Jaap F. van and Kok, Jim B.W. and Boer, André de (2003) Fluid structure interaction to predict liner vibrations in an industrial combustion system. In: Proceedings of the Tenth International Congress on Sound and Vibration. KTH, Stockholm, pp. 767-774. ISBN 9780854327898

Huls, Rob A. and Kok, Jim B.W. and Boer, André de (2003) Vibration of the liner in an industrial combustion system due to an acoustic field. In: International Forum on Aeroelasticity and. Structural Dynamics, June 4-6, 2003, Amsterdam, The Netherlands.

Oude Nijhuis, Marco H.H. and Boer, André de (2003) Optimization strategy for actuator and sensor placement in active structural acoustic control. In: International Forum on Aeroelasticity and. Structural Dynamics, IFASD, June 4-6, 2003, Amsterdam, The Netherlands.

Ruijter, W. and Spallino, R. and Warnet, L. and Boer, A. de (2003) Optimization of composite panels using neural networks and genetic algorithms. In: Second MIT Conference on Compurational Fluid and Solid Mechanics, June 17–20, 2003, Boston MA, USA (pp. pp. 2359-2363).

Wijnant, Y.H. and Hannink, M.H.C. and Boer, A. de (2003) Application of Viscothermal Wave Propagation Theory for Reduction of Boundary Layer Induced Noise. In: 5th European Conference on Noise Control, Euronoise, May 19-21, 2003, Naples, Italy.

2002

Beijers, C.A.J. and Boer, A. de (2002) Hybrid isolation of structure-borne sound. In: International Symposium on Active Control of Sound and Vibration, ACTIVE, July 15-17, 2002, Southampton, UK.

Beijers, C.A.J. and Boer, A. de (2002) Hybrid Isolation of Structure-Borne Sound: Numerical Models. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Beijers, C.A.J. and Boer, A. de (2002) Dynamic Behaviour of Rubber Engine Mounts [Poster]. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Huls, R.A. and Kok, J.B.W. and Boer, A. de (2002) Vibrations in industrial gas turbines [Poster]. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Oude Nijhuis, M.H.H. and Boer, A. de (2002) Active Structural Acoustic Feedback Control [Poster]. In: Fifth Engineering Mechanics Symposium, 18-19 November 2002, Rolduc, Kerkrade, The Netherlands.

Oude Nijhuis, M.H.H. and Boer, A. de (2002) Optimization strategy for actuator and sensor placement in active structural acoustic control. In: International Symposium on Active Control of Sound and Vibration, ACTIVE, July 15-17, 2002, Southampton, UK (pp. pp. 621-632).

Oude Nijhuis, Marco and Boer, André de (2002) Finite element modelling approach in active structural acoustic control. In: Proceedings Mechatronics 2002. Universiteit Twente Uitgeverij, Enschede. ISBN 9789036517669

Oude Nijhuis, Marco H.H. and Boer, André de (2002) Finite element models applied in active structural acoustic control. In: Smart Structures and Materials 2002: Modeling, Signal Processing, and Control. SPIE, Bellingham, Washington, pp. 57-68. ISBN 9780819444417

2001

Beijers, C.A.J. and Tijdeman, H. and Boer, A. de (2001) Hybrid Isolation of Structure Borne Sound [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Boer, André de (2001) De dynamiek van dynamica. [Lecture]

Huls, R.A. and Kok, J.B.W. and Boer, A. de (2001) Highly reliable low NOx combustion systems for gas turbines [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

Oude Nijhuis, M.H.H. and Boer, A. de (2001) Actuator optimization for Active Structural Acoustic Control [Poster]. In: Fourth Engineering Mechanics Symposium, November 18-20, 2001, Rolduc, Kerkrade, The Netherlands.

2000

Beijers, C.A.J. and Tijdeman, H. and Boer, A. de (2000) Hybrid Isolation of Structure Borne Sound [Poster]. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Boer, A. de and Veul, R.P.G. and Arendsen, P. and Bakker, M. (2000) Development of an Analysis and Design Environment for Hybrid Damping. In: AIAA/ASME/ASCE/AHS/ASC, 3-6 april 2000, Atlanta, Georgia.

Oude Nijhuis, M.H.H. and Boer, A. de and Tijdeman, H. (2000) Modelling of piezoelectric sensors and actuators for noise and vibration control [Poster]. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

Oude Nijhuis, M.H.H. and Boer, A. de and Tijdeman, H. (2000) Active Noise and Vibration Control using Piezoelectric Sensors and Actuators. In: Third Engineering Mechanics Symposium, 20-21 November 2000, Rolduc, Kerkrade, The Netherlands.

This list was generated on Mon Sep 1 05:33:24 2014 CEST.