Author Publications

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type
Number of items: 162.

Article

Avetisyan, M. and Meinders, T. and Huetink, J. (2005) Influence of an Accurate Trimming operation on Springback. International Journal of Forming Processes, 5 (specia). pp. 31-51. ISSN 1292-7775

Berg, Peter van den and Borst, Rene de and Huetink, Han (1996) An Eulerean finite element model for penetration in layered soil. International Journal for Numerical and Analytical Methods in Geomechanics, 20 (12). pp. 865-886. ISSN 0363-9061

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2008) An optimisation strategy for industrial metal forming processes. Structural and Multidisciplinary Optimization, 35 (6). pp. 571-586. ISSN 1615-147X

Bonte, Martijn H.A. and Fourment, Lionel and Do, Tien-tho and Boogaard, A.H. van den and Huetink, J. (2010) Optimization of forging processes using Finite Element simulations : A comparison of Sequential Approximate Optimization and other algorithms. Structural and Multidisciplinary Optimization, 42 (5). 797 - 810. ISSN 1615-147X

Boogaard, A.H. van den and Huetink, J. (2006) Simulation of aluminium sheet forming at elevated temperatures. Computer Methods in Applied Mechanics and Engineering, 195 (48-49). pp. 6691-6709. ISSN 0045-7825

Boogaard, A.H. van den and Meinders, T. and Huetink, J. (2003) Efficient implicit finite element analysis of sheet forming processes. International Journal for Numerical Methods in Engineering, 56 (8). pp. 1083-1107. ISSN 0029-5981

Boogaard, A.H. van den and Wisselink, H.H. and Huetink, J. (2005) Do Advanced Material Models Contribute to Accuracy in Industrial Sheet Forming Simulations? Advanced Materials Research, 6-8 . pp. 71-80. ISSN 1662-8985

Carleer, B.D. and Vreede, P.T. and Louwes, M.F.M. and Huetink, J. (1994) Modelling drawbeads with finite elements and verification. Journal of Materials Processing Technology, 45 (1-4). pp. 63-68. ISSN 0924-0136

Dijkstra, P.T.S. and Dijk, D.J. van and Huetink, J. (2002) A microscopy study of the transition from yielding to crazing in polypropylene. Polymer Engineering and Science, 42 (1). pp. 152-160. ISSN 0032-3888

Dijkstra, P.T.S. and Gaymans, R.J. and Dijk, D.J. van and Huetink, J. (2003) Elasticity at Large Deformations and High Strain Rates in Injection Molded Polypropylene. Polymer Engineering and Science, 43 (9). pp. 1613-1623. ISSN 0032-3888

Geijselaers, H.J.M. and Huetink, J. (2003) A second order discontinuous Galerkin method for advection on unstructured triangular meshes keywords: advection convection discontinuous galerkin finite elements. Communications in Numerical Methods in Engineering, 19 (4). pp. 275-284. ISSN 1069-8299

Haaren, M.J. van and Stoker, H.C. and Boogaard, A.H. van den and Huetink, J. (2000) The ALE-method with triangular elements: direct convection of integration point values. International Journal for Numerical Methods in Engineering, 49 (5). pp. 697-720. ISSN 0029-5981

Helm, P.N. and Huetink, J. and Akkerman, R. (1998) Comparison of artificial dissipation and limited flux schemes in Arbitrary Lagrangian-Eulerian finite element formulations. International Journal for Numerical Methods in Engineering, 41 (6). pp. 1057-1076. ISSN 0029-5981

Hol, J. and Cid Alfaro, M.V. and Meinders, V.T. and Huetink, J. (2011) Advanced friction modeling in sheet metal forming. Key Engineering Materials, 473 . 715 - 722. ISSN 1013-9826

Huetink, J. and Boogaard, A.H. van den and Rietman, A.D. and Lof, J. and Meinders, T. (1999) A mixed elastoplastic/rigid-plastic material model. International Journal for Numerical Methods in Engineering, 46 (9). pp. 1421-1434. ISSN 0029-5981

Huetink, J. and Vreede, P.T. and Lugt, J. van der (1990) Progress in mixed Eulerian-Lagrangian finite element simulation of forming processes. International Journal for Numerical Methods in Engineering, 30 (8). pp. 1441-1457. ISSN 0029-5981

Huisman, H.J. and Huetink, J. (1985) A combined eulerian-lagrangian three-dimensional finite-element analysis of edge-rolling. Journal of Mechanical Working Technology, 11 (3). pp. 333-353. ISSN 0378-3804

Kloosterman, G. and Damme, R.M.J. van and Boogaard, A.H. van den and Huetink, J. (2001) A geometrical-based contact algorithm using a barrier method. International Journal for Numerical Methods in Engineering, 51 (7). pp. 865-882. ISSN 0029-5981

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2008) Flow front tracking in ALE/Eulerian formulation FEM simulations of aluminium extrusion. Key Engineering Materials, 367 . pp. 39-46. ISSN 1013-9826

Langkruis, J. van de and Lof, J. and Kool, W.H. and Zwaag, S. van der and Huetink, J. (2000) Comparison of experimental AA6063 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model. Computational Materials Science, 18 (3-4). pp. 381-392. ISSN 0927-0256

Lingbeek, R. and Huetink, J. and Ohnimus, S. and Petzoldt, M. and Weiher, J. (2005) The development of a finite elements based springback compensation tool for sheet metal products. Journal of Materials Processing Technology, 169 (1). pp. 115-125. ISSN 0924-0136

Lugt, J. van der and Huetink, J. (1986) Thermal mechanically coupled finite element analysis in metal-forming processes. Computer Methods in Applied Mechanics and Engineering, 54 (2). pp. 145-160. ISSN 0045-7825

Meinders, T. and Berg, A. van den and Huetink, J. (1999) Deep drawing simulations of tailored blanks and experimental verification. International Sheet Metal Review . pp. 80-83. ISSN 1471-6542

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Improvement of implicit finite element code performance in deep drawing simulations by dynamics contributions. Journal of Materials Processing Technology, 134 (3). pp. 413-420. ISSN 0924-0136

Meinders, T. and Carleer, B.D. and Geijselaers, H.J.M. and Huetink, J. (1998) The implementation of an equivalent drawbead model in a finite-element code for sheet metal forming. Journal of Materials Processing Technology, 83 (1-3). pp. 234-244. ISSN 0924-0136

Meinders, V.T. and Berg, A. van den and Huetink, J. (2000) Deep drawing simulations of tailored blanks and experimental verification. Journal of Materials Processing Technology, 103 (1). pp. 65-73. ISSN 0924-0136

Mooi, H.G. and Koenis, P.T.G. and Huetink, J. (1999) An effective split of flow and die deformation calculations of aluminium extrusion. Journal of Materials Processing Technology, 88 (1-3). pp. 67-76. ISSN 0924-0136

Niazi, M.S. and Wisselink, H.H. and Meinders, V.T. and Huetink, J. (2012) Failure Predictions for DP Steel Cross-die Test Using Anisotropic Damage. International journal of damage mechanics, 21 . 713 - 754. ISSN 1530-7921

Noman, M. and Clausmeyer, T. and Barthel, C. and Svendsen, B. and Huetink, J. and Riel, M. van (2010) Experimental characterization and modeling of the hardening behavior of the sheet steel LH800. Materials Science and Engineering A: Structural materials . ISSN 0025-5416

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2009) Constitutive modeling of metastable austenitic stainless steel. International Journal of Material Forming, 2 (Suppl.). pp. 419-422. ISSN 1960-6206

Perdahcıoğlu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Influence of stress state and strain path on deformation induced martensitic transformations. Materials Science and Engineering A: Structural materials, 481-48 (1-2). pp. 727-731. ISSN 0025-5416

Post, J. and Klaseboer, G. and Stinstra, E. and Amstel, T. van and Huetink, J. (2009) Multi-stage metal forming: Variation and transformation. Journal of Materials Processing Technology, 209 (5). pp. 2648-2661. ISSN 0924-0136

Post, J. and Vries, C. de and Huetink, J. (2009) Validation tool for 2D multi-stage metal-forming processes on meta-stable stainless steels. Journal of Materials Processing Technology, 209 (15-16). pp. 5558-5572. ISSN 0924-0136

Quak, W. and Boogaard, A.H. van den and Huetink, J. (2009) Meshless methods and forming processes. International Journal of Material Forming, 2 (Suppl.). 585 - 588. ISSN 1960-6206

Selman, A. and Atzema, E. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Wrinkling in sheet metal forming: experimental testing vs. numerical analysis. International journal of forming processes, 6 (2). pp. 147-160. ISSN 1292-7775

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Adaptive numerical analysis of wrinkling in sheet metal forming. International journal of forming processes, 6 (1). pp. 87-102. ISSN 1292-7775

Thije, R.H.W. ten and Akkerman, R. and Huetink, J. (2007) Large deformation simulation of anisotropic material using an updated Lagrangian finite element method. Computer Methods in Applied Mechanics and Engineering, 196 (33-34). pp. 3141-3150. ISSN 0045-7825

Vegter, H. and Horn, Carel H.L.J. ten and An, Y. and Atzema, E.H. and Pijlman, H.H. and Boogaard, A.H. van den and Huetink, J. (2006) Comportamento pl'astico do material: um dado importante para prever a estampagem de chapas. Corte & conformacao de metais, 12 . pp. 50-69. ISSN 1808-351X

Vreede, P.T. and Carleer, B.D. and Louwes, M.F.M. and Huetink, J. (1995) Finite-element simulation of sheet-forming processes with the help of contact elements on small-scale workstations. Journal of Materials Processing Technology, 50 (1-4). pp. 264-276. ISSN 0924-0136

Wang, J. and Levkovitch, V. and Reusch, F. and Svendsen, B. and Huetink, J. and Riel, M. van (2008) On the modeling of hardening in metals during non-proportional loading. International Journal of Plasticity, 24 (6). pp. 1039-1070. ISSN 0749-6419

Wisselink, H.H. and Huetink, J. (2004) 3D FEM simulation of stationary metal forming processes with applications to slitting and rolling. Journal of Materials Processing Technology, 148 (3). pp. 328-341. ISSN 0924-0136

Wisselink, H.H. and Klaseboer, G. and Huetink, H. (2009) Modelling of a burr-free blanking process. International journal of material forming, 2 (Suppl.). pp. 539-542. ISSN 1960-6206

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, H.J. and Gaymans, R.J. (2003) Influence of molecular weight on the fracture properties of aliphatic polyketone terpolymers. Polymer, 44 (20). pp. 6361-6370. ISSN 0032-3861

Zuiderduin, W.C.J. and Homminga, D.S. and Huetink, J. and Gaymans, R.J. (2005) Influence of copolymerisation on fracture behaviour of aliphatic polyketones. Polymer, 46 (6). pp. 1921-1934. ISSN 0032-3861

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2004) Notch sensitivity of aliphatic polyketone terpolymers. Journal of Applied Polymer Science, 91 (4). pp. 2558-2575. ISSN 0021-8995

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2006) Rigid particle toughening of aliphatic polyketone. Polymer, 47 (16). pp. 5880-5887. ISSN 0032-3861

Zuiderduin, W.C.J. and Huetink, J. and Gaymans, R.J. (2007) Pre-yield tensile set of a semi-crystalline polymer, its blend and composite. Journal of Materials Science, 42 (12). pp. 4131-4135. ISSN 0022-2461

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2004) Mechanical properties of polyketone terpolymer/rubber blends. Polymer, 45 . pp. 3765-3779. ISSN 0032-3861

Zuiderduin, W.C.J. and Vlasveld, D.P.N. and Huetink, J. and Gaymans, R.J. (2005) Influence of sample thickness on fracture behaviour of a polyketone and a polyketone-rubber blend. Polymer, 46 (23). pp. 10321-10330. ISSN 0032-3861

Zuiderduin, W.C.J. and Westzaan, C. and Huetink, J. and Gaymans, R.J. (2003) Toughening of polypropylene with calcium carbonate particles. Polymer, 44 (1). pp. 261-275. ISSN 0032-3861

Book Section

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) A metamodel based optimisation algorithm for metal forming processes. In: Advanced Methods in Material Forming. Springer, pp. 55-72. ISBN 9783540698449

Datta, K. and Geijselaers, H.J.M. and Post, J. and Beyer, J. and Huetink, J. (2007) Modelling the Material Behaviour of Metastable Stainless Steels. In: NUMIFORM '07: Materials processing and design: modeling, simulation and applications. American Institute of Physics, pp. 655-660. ISBN 9780735404151

Meinders, V.T. and Berg, A. van den and Huetink, J. (1998) Deep drawing simulations of Tailored Blanks and experimental verification. In: Sheet Metal 1998. , Enschede, pp. 235-246. ISBN 9789036511131

Conference or Workshop Item

Amstel, T. van and Groen, M. and Post, J. and Huetink, J. (2005) Optimizing the Post Sandvik Nanoflex material model using inverse optimization and the finite element method. In: eighth ESAFORM conference on Material Forming, April 2005, Cluj-Napoca, Romania (pp. pp. 167-170).

Assaad, W. and Geijselaers, H.J.M. and Huetink, J. (2009) Boundary conditions applied on bearing corner in direct aluminum extrusion. In: Esaform 2009, the 12th International ESAFORM Conference on Material Forming, April 27-29, 2009, Enschede.

Assaad, W.A. and Geijselaers, H.J.M. and Huetink, J. (2008) 3-D Numerical Simulation of Direct Aluminum Extrusion and Die Deformation. In: ET '08, the Conference for Innovations in Aluminum Extrusion, May 13-16, 2008, Gaylord Palms Orlando, FL, USA .

Avetisyan, M. and Meinders, T. and Huetink, J. (2004) Springback: Influence of an Accurate Trimming on Springback [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Avetisyan, M. and Meinders, T. and Huetink, J. (2004) Improvement of Springback Predictability after forming and trimming operations. In: 7th ESAFORM conference on Material Forming, April 28-30, 2004, Trondheim, Norway.

Banabic, D. and Huetink, J. (2006) Determination of the yield locus by means of temperature measurement. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K (pp. pp. 359-362).

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Metamodelling techniques for the optimisation of metal forming processes. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2005) Solving optimisation problems in metal forming using Finite Element simulation and metamodelling techniques. In: Apomat conference, 2005, Morschach, Switzerland.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2006) An optimisation strategy for industrial metal forming processes: abstract WCCM 2006. In: 7th World Congress on Computational Mechanics, July 16 - 22, 2006, Los Angeles, California.

Bonte, M.H.A. and Boogaard, A.H. van den and Huetink, J. (2007) Deterministic and robust optimisation strategies for metal forming proceesses. In: Forming Technology Forum 2007 – Application of Stochastics and Optimization Methods, 14th – 15th March 2007, ETH Zurich, Switzerland.

Bonte, M.H.A. and Do, T.T. and Fourment, L. and Boogaard, A.H. van den and Huetink, J. and Habbal, A. (2006) A comparison between optimisation algorithms for metal forming processes. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 883-886).

Boogaard, A.H. van den and Huetink, J. (2003) Prediction of sheet necking with shell finite element models. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Boogaard, A.H. van den and Huetink, J. (2004) Modelling of aluminium sheet forming at elevated temperatures. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Boogaard, A.H. van den and Meinders, T. and Huetink, J. (2003) Efficient implicit FEM simulation of sheet metal forming. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Boogaard, A.H. van den and Pijlman, H.H. and Huetink, J. (2000) Anisotropic yield functions in a co-rotating reference frame. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Boogaard, A.H. van den and Riel, M. van and Huetink, J. (2005) Evaluation of stresses in a combined plane strain-simple shear test. In: Eighth ESAFORM Conference on Material Forming, 27-29 April 2005, Cluj-Napoca, Romania.

Boogaard, A.H. van den and Rietman, A.D. and Huetink, J. (1998) Iterative solvers in forming process simulations. In: 6th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede, the Netherlands.

Boogaard, A.H. van den and Vliet, N. van and Huetink, J. (1998) Object oriented design of a thermo-mechanical FEM code. In: World Conference on Computational Mechanics , 1998.

Boogaard, A.H. van den and Emmens, W.C. and Huetink, J. (2010) Effect of Thickness Stress in Stretch-Bending. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 504 - 511).

Burchitz, I. and Meinders, T. and Huetink, J. (2004) Improving numerical predictability of Springback [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2005) Improving numerical predictability of Springback [poster]. In: NIMR Congress, December 12-13, 2005, Noordwijkerhout, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2005) Improving numerical predictability of Springback [poster]. In: Eight Engineering Mechanics Symposium, EM, November 21-22, 2005, Lunteren, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Adaptive through-thickness integration for shells [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Adaptive through-thickness integration for shell elements [poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Burchitz, I. and Meinders, T. and Huetink, J. (2007) Simulation of springback: adaptive quadrature [poster]. In: NIMR Congress, December 10-11, 2007, Noordwijkerhout, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2007) Accurate simulation of springback using adaptive integration [poster]. In: Tenth Engineering Mechanics Symposium, EM 2007, 11-12 October, 2007 , Lunteren, The Netherlands.

Burchitz, I. and Meinders, T. and Huetink, J. (2006) Influence of numerical parameters on springback prediction in sheet metal forming. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 407-410).

Burchitz, I. and Meinders, T. and Huetink, J. (2004) Springback in metal forming. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Burchitz, I.A. and Meinders, T. and Huetink, J. (2007) Adaptive Through-Thickness Integration Strategy for Shell Elements. In: International Conference in Numerical Methods in industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 699-704).

Carleer, B.D. and Huetink, J. (1996) Closing the Gap between the Workshop and Numerical Simulations in Sheet Metal Forming. In: ECCOMAS Conference on Numerical Methods in Engineering ; 2 (Paris, France), 9-13 September 1996, Paris (pp. pp. 554-560).

Carleer, B.D. and Meinders, T. and Pijlman, H.H. and Huetink, J. and Vegter, H. (1997) A Planar Anisotropic Yield Function Based on Multi Axial Stress States in Finite Elements. In: COMPLAS V, 5th International Conference on Computational Plasticity, March 17-20, 1997, Barcelona, Spain.

Carleer, Bart D. and Meinders, Timo and Huetink, Han (1996) Equivalent drawbead model in finite element simulations. In: NUMISHEET '96, Third International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes, September 29 - October 3, 1996, Dearborn, Michigan (pp. pp. 25-32).

Datta, K. and Post, J.A. and Geijselaers, H.J.M. and Huetink, J. (2002) Finite element modelling of concurrent deformation and transformation in metastable steels. In: ABAQUS World Users Conference, 28-31 May, 2002, New Port, RI, USA.

Datta, K. and Akagi, H. and Geijselaers, H.J.M. and Huetink, J. (2003) Finite Element Modelling of Bends and Creases during Folding Ultra Thin Stainless Steel Foils. In: ABAQUS Users' Conference 2003, November 24-25, 2003, Vienna.

Datta, K. and Hommes, M. and Post, J. and Geijselaers, H.J.M. and Huetink, H. and Beyer, J. (2003) Constitutive modelling of Sandvik 1RK91. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Geijselaers, H.J.M. and Huetink, J. (2000) Semi implicit second order discontinuous Galerkin convection for ALE calculations. In: ECCOMAS, European Congress on Computational Methods in Applied Sciences and Engineering, 11-14 September 2000, Barcelona, Spain.

Geijselaers, H.J.M. and Huetink, H. (2004) Thermo-Mechanical Analysis with Phase Transformations. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 1508-1513).

Geijselaers, H.J.M. and Huetink, J. (2001) Convection by means of least squares projection for ALE calculations. In: Fourth ESAFORM Conference on Material Forming, April 23-25, 2001, Liege, Belgium.

Geijselaers, H.J.M. and Huetink, J. (2004) Simulation of Steady Laser Hardening by an Arbitrary Lagrangian Eulerian Method. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Geijselaers, H.J.M. and Yu, Yuhong and Huetink, J. (2001) Simulation of Steady State Laser Hardening. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan.

Haaren, L. and Boogaard, A.H. van den and Huetink, J. (2004) Modelling of aluminium sheet material at elevated temperatures. In: Seventh ESAFORM Conference on Material Forming, 28-30 april 2004, Trondheim, Norway.

Haaren, M.J. van and Boogaard, A.H. van den and Stoker, H.C. and Huetink, J. (1999) The arbitrary Lagrangian-Eulerian method on grids of triangular elements: a new convection scheme. In: Second ESAFORM Conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

Hadoush, A. and Boogaard, A.H. van den and Huetink, J. (2007) Stable incremental deformation of a strip to high strain. In: Sheet metal 2007, April 1st-4th 2007, Palermo, Italy (pp. pp. 615-620).

Hol, J. and Cid Alfaro, M.V. and Meinders, T. and Huetink, J. (2011) A Multi-scale Friction Model for Sheet Metal Forming Simulations. In: 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2011, 21-26 August 2011, Seoul, South Korea (pp. 784 - 791).

Hol, J. and Meinders, V.T. and Huetink, J. (2011) A multi-scale friction model framework for full scale sheet forming simulations. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 207 - 212).

Huetink, J. and Boogaard, A.H. van den and Rietman, A.D. and Lof, J. and Meinders, T. (1998) A mixed elastoplastic / rigid-plastic material model. In: Fourth World Congress on Computational Mechanics, WCCM IV, 29 June - 2 July 1998, Buenos Aires, Argentina.

Huetink, J. (2004) Implementation of Microstructural Material Phenomena in Macro Scale Simulations of Forming Processes. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio.

Huetink, J. (2006) On Anisotropy, Objectivity and Invariancy in finite thermo–mechanical deformations. In: ninth ESAFORM conference on Material Forming, April 2006, Glasgow, U.K (pp. pp. 355-358).

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2007) Numerical Forming Simulations and Optimisation in Advanced Materials. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2007, June 17-21, 2007, Porto, Portugal (pp. pp. 281-286).

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, T. (2000) Improvements in FE-analysis of real-life sheet metal forming. In: European Congress on Computational Methods in Applied Science and Engineering, ECCOMAS 2000, 11-14 September 2000, Barcelona.

Huetink, J. and Boogaard, A.H. van den and Geijselaers, H.J.M. and Meinders, V.T. (2000) Numerical and physical modelling in forming. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Kloosterman, G. and Boogaard, A.H. van den and Huetink, J. (2001) A modified barrier approach to contact problems. In: 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, 18-20 June 2001, Toyohashi, Japan (pp. 97 - 102).

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2006) Flow front tracking in aluminium extrusion dies by means of particle trajectories [Poster]. In: 9th Engineering Mechanics Symposium, October 26-27, 2006, Lunteren, the Netherlands.

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. (2010) Mould filling analysis of aluminium extrusion dies. In: 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, June 13-17, 2010, Pohang, Korea (pp. 290 - 295).

Koopman, A.J. and Geijselaers, H.J.M. and Huetink, J. and Nilsen, K.E. and Koenis, P.T.G. (2007) A SUPG approach for determining frontlines in aluminium extrusion simulations and a comparison with experiments. In: 10th ESAFORM Conference on Material Forming 2007, 18-20 April 2007, Zaragoza, Spain (pp. pp. 602-607).

Kurukuri, S. and Boogaard, A.H. van den and Huetink, J. (2006) Simulation of thermo-mechanical aluminium sheet formming [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Kurukuri, S. and Boogaard, A.H. van den and Huetink, J. (2007) Finite element simulation of aluminum sheet warm forming using alflow hardening model. In: IX International Conference on Computational Plasticity, COMPLAS 2007, 5-7 September 2007, Barcelona, Spain (pp. pp. 635-638).

Lingbeek, R.A. and Huetink, J. and Ohnimus, S. and Weiher, J. (2005) Iterative springback compensation of NUMISHEET benchmark #1. In: NUMISHEET 2005, 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, August 15-19, 2005, Detroit, Michigan, USA.

Lof, J. and Huetink, J. (1998) Numerical Modeling of Aluminium Extrusion. In: First Engineering Mechanics Symposium, 23-24 November 1998, Rolduc, Kerkrade, The Netherlands.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2002) An algorithm to make your implicit code competitive with an explicit code for large scale problems. In: NUMISHEET 2002, 2002.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (1999) A mixed elastoplastic / rigid plastic material model. In: Numisheet conference, 1999.

Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2003) Advanced sheet metal forming. In: Sixth ESAFORM Conference on Material Forming, April 28-30, 2003, Salerno, Italy.

Meinders, T. and Carleer, B.D. and Huetink, J. (1998) Simulation of the deep drawing process: a hierarchical method. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Meinders, T. and Carleer, B.D. and Vegter, H. and Huetink, J. (1997) Recent developments in finite element simulations of the deep drawing process. In: Sheet Metal 1997, 8 - 10 April 1997, Ulster, United Kingdom.

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1998) Implementation of plastic thickness strain in an equivalent drawbead model based on a penalty constrained model. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Meinders, T. and Geijselaers, H.J.M. and Huetink, J. (1999) Equivalent drawbead performance in deep drawing simulations. In: Numisheet conference, 1999.

Meinders, Timo and Selman, Sid and Atzema, Eisso H. and Huetink, Han (2003) Wrinkling prediction in sheet metal forming and experimental verification. In: VII International conference on computational plasticity, COMPLAS, April 7-10, 2003, Barcelona, Spain.

Moesdijk, R.D. van de and Wisselink, H.H. and Boogaard, A.H. van den and Huetink, J. and Bolt, P.J. and Sillekens, W.H. (1998) Blanking by means of the finite element method. In: IACM Conference, 1998.

Nagy, Geza T. and Valkering, Kasper and Huetink, Han (2005) Wrinkling criteria in sheet metal forming for single sided contact situation and its application. In: COMPLAS VIII, VIII International Conference on Computational Plasticity, 2005, Barcelona, Spain.

Niazi, M.S. and Wisselink, H.H. and Meinders, T. and Huetink, J. (2009) Implementation of an anisotropic damage material model for non-proportional loading. In: COMPLAS X, International Conference on Computational Plasticity, 2-4 September 2009, Barcelona.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Mechanical tests and constitutive modeling of metastable austenitic stainless steels [em poster]. In: EM symposium, November 21-22, 2005, Lunteren, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Tailoring of metastable steels [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2004) Tailoring of Metastable Steels [poster]. In: NIMR Congress, December 20-21, 2004, Noordwijkerhout, The Netherlands.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2006) Influence of Stress state and Strain path on deformation induced martensitic transformations. In: ESOMAT 2006, 7th European Symposium on Martensitic Transformations and Shape Memory Alloys, September 10th to 15th, 2006, Bochum, Germany.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2007) A stress integration algorithm for phase transforming steels. In: IX international conference on computational plasticity COMPLAS, 2007, Barcelona.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2010) Mean field modeling of metastable austenitic stainless steel. In: International Symposium on Plasticity, January 3-8, 2010, St. Kitts.

Perdahcioglu, E.S. and Geijselaers, H.J.M. and Huetink, J. (2008) Constitutive modeling of metastable austenitic stainless steel. In: 11th ESAFORM2008 Conference on Material Forming, April 23-25, 2008, Lyon, France.

Pijlman, Hermen H. and Huetink, J. and Meinders, T. and Carleer, B.D. and Vegter, H. (1998) The implementation of the vegter yield criterion and a physically based hardening rule in finite elements. In: Conference of the International Association of Computational Mechanics, IACM, June-July 1998, Buenos Aires, Argentina.

Post, J. and Datta, K. and Huetink, J. (2004) Constitutive behaviour of the metastable stainless steel: Sandvik Nanoflex. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 13-17 June, 2004, Columbus, Ohio (pp. pp. 1670-1675).

Post, J. and Klaseboer, G. and Stinstra, E. and Huetink, J. (2004) A DACE study on a three stage metal forming process made of Sandvik Nanoflex. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 475-480).

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Non-proportional tension-shear experiments in a biaxial test facility. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK (pp. pp. 323-326).

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Constitutive Behaviour in Strain Path Sensitive Sheet Metal [em poster]. In: Ninth Engineering Mechanics Symposium, 26-27 October 2006, Rolduc, Kerkrade.

Riel, M. van and Boogaard, A.H. van den and Huetink, J. (2006) Strain path sensitivity in DC06 mild steel [poster]. In: NIMR Congress, December 11-12, 2006, Noordwijkerhout, The Netherlands.

Rietman, A.D. and Liempt, P. van and Huetink, H. (1997) The modeling of compression tests with a physically based material model using finite elements. In: Fifth International Conference on Computational Plasticity, 17-20 March 1997, Barcelona, Spain (pp. pp. 965-972).

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2000) Wrinkling prediction with adaptive mesh refinement. In: Third ESAFORM Conference on Material Forming, April 11-14, 2000, Stuttgart, Germany.

Selman, A. and Meinders, T. and Boogaard, A.H. van den and Huetink, J. (2002) On adaptive mesh refinement in wrinkling prediction analysis. In: Fifth ESAFORM Conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Selman, A. and Meinders, T. and Huetink, J. and Boogaard, A.H. van den (2002) Comprehensive adaptive mesh refinement in wrinkling prediction analysis. In: International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2002, 21-25/10/2002, Science Town, Taejon, Korea.

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Quak, W. and Akkerman, R. and Huetink, J. (2011) Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland.

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Quak, W. and Akkerman, R. and Huetink, J. (2011) Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. In: 14th International ESAFORM Conference on Material Forming, ESAFORM 2011, 27-29 April 2011, Belfast, Northern Ireland (pp. 1290 - 1295).

Stelt, A.A. van der and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. and Huetink, J. (2012) Free surface modeling of contacting solid metal flows employing the ALE formulation. In: ESAFORM 2012, Erlangen (pp. 431 - 436).

Thije, R.H.W. ten and Akkerman, R. and Huetink, J. (2006) Large Deformation Simulation of Anisotropic Material. In: Ninth ESAFORM Conference on Material Forming 2006, 26-28 April 2006, Glasgow, UK.

Vegter, H. and Horn, Carel H.L.J. ten and An, Yuguo and Atzema, Eisso H. and Pijlman, Hermen H. and Boogaard, Ton H. van den and Huetink, Han (2003) Characterisation and modelling of the plastic material behaviour and its application in sheet metal forming simulation. In: COMPLAS VII, 7th International Conference on Computational Plasticity, April 7-10, 2003, Barcelona, Spain.

Voncken, R.M.J. and Sluis, O. van der and Post, J. and Huetink, J. (2004) FE calculations on a three stage metal forming process of Sandvik Nanoflex. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 469-474).

Wisselink, H.H. and Huetink, J. (1998) Simulation of stationary sheet metal cutting processes. In: International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, 22-25 June 1998, Enschede.

Wisselink, H.H. and Huetink, J. (1998) 3-D modelling of sheet metal shearing. In: ESAFORM conference on Material Forming, March 17-20, 1998, Sophia-Antipolis, France.

Wisselink, H.H. and Huetink, J. (1999) Finite element model of the guillotining process. In: second ESAFORM conference on Material Forming, April 13-16, 1999, Guimaraes, Portugal.

Wisselink, H.H. and Huetink, J. (2002) 3D FEM simulations of the rolling of stator vanes, including tool deformation. In: 7th International Conference on Technology of Plasticity, ICTP 2002, 27 Oct. - 1 Nov. 2002, Yokohama, Japan.

Wisselink, H.H. and Huetink, J. (2002) Tool deformation during the shape rolling of stator vanes. In: fifth ESAFORM conference on Material Forming, April 14-17, 2002, Krakow, Poland.

Wisselink, H.H. and Huetink, J. (2003) 3D FEM Simulation of shape rolling using an ALE method. In: VII International Conference on Computational Plasticity, COMPLAS 2003, April 7-10, 2003, Barcelona, Spain.

Wisselink, H.H. and Huetink, J. and Dijk, M.H.H. van and Leeuwen, A.J. van (2001) 3D FEM Simulations of a shape rolling process. In: fourth ESAFORM conference on Material Forming, April 23-25, 2001, Liège, Belgium.

Wisselink, H.H. and Huetink, J. (1999) Simulation of the slitting process with the finite element method. In: International Conference on Sheet Metal, SheMet, 27-28 September 1999, Friedrich-Alexander-University Erlangen-Nuremberg (pp. pp. 143-152).

Wisselink, H.H. and Huetink, J. (2004) FEM simulation of multi step forming of thick sheet. In: NUMIFORM, International Conference on Numerical Methods in Industrial Forming Processes, 13-17 June, 2004, Columbus, Ohio (pp. pp. 899-904).

Wisselink, H.H. and Huetink, J. (2007) Application of nonlocal damage models to sheet forming applications. In: COMPLAS 2007, IX International Conference on Computational Plasticity, 5-7 September 2007, Barcelona (pp. pp. 521-524).

Wisselink, H.H. and Huetink, J. (2009) Modelling of ductile failure in metal forming. In: 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Wisselink, H.H. and Huetink, J. (2010) Modelling of failure in sheet forming using cohesive elements. In: 9th World Congress on Computational Mechanics & 4th Asian Pacific Congress on Computational Mechanics, WCCM/APCOM 2010, July 19-23, 2010, Sydney (pp. - ).

Wisselink, H.H. and Niazi, M.S. and Huetink, J. (2011) Validation of advanced material models using the crossdie test. In: IDDRG Conference 2011: Towards sutainable sheet forming processes, 5-8 June 2011, Bilbao, Spain.

Wisselink, Harm and Huetink, Han (2008) Prediction of the bendability of sheet metals using nonlocal damage models. In: Metal forming 2008, 12th international conference, September 21-24, 2008, Krakow, Polska (pp. pp. 217-224).

Report

Selman, A. and Huetink, J. and Boogaard, A.H. van den (2000) Error estimation for thin sheet metal forming processes. [Report]

Thesis

Huetink, J. (1986) On the simulation of thermo-mechanical forming processes. thesis.

This list was generated on Thu Jul 24 05:20:01 2014 CEST.