A novel numerical mechanical model for the stress–strain distribution in superconducting cable-in-conduit conductors

Share/Save/Bookmark

Qin, J. and Wu, Y. and Warnet, L.L. and Nijhuis, A. (2011) A novel numerical mechanical model for the stress–strain distribution in superconducting cable-in-conduit conductors. Superconductor Science and Technology, 24 (6). 065012. ISSN 0953-2048

open access
[img]
Preview
PDF
925kB
Abstract:Besides the temperature and magnetic field, the strain and stress state of the superconducting Nb3Sn wires in multi-stage twisted cable-in-conduit conductors (CICCs), as applied in ITER or high field magnets, strongly influence their transport properties. For an accurate quantitative prediction of the performance and a proper understanding of the underlying phenomena, a detailed analysis of the strain distribution along all individual wires is required. For this, the thermal contraction of the different components and the huge electromagnetic forces imposing bending and contact deformation must be taken into account, following the complex strand pattern and mutual interaction by contacts from surrounding strands. In this paper, we describe a numerical model for a superconducting cable, which can simulate the strain and stress states of all single wires including interstrand contact force and associated deformation. The strands in the cable can be all similar (Nb3Sn/Cu) or with the inclusion of different strand materials for protection (Cu, Glidcop).

The simulation results are essential for the analysis and conductor design optimization from cabling to final magnet operation conditions. Comparisons are presented concerning the influence of the sequential cable twist pitches and the inclusion of copper strands on the mechanical properties and thus on the eventual strain distribution in the Nb3Sn filaments when subjected to electromagnetic forces, axial force and twist moment. Recommendations are given for conductor design improvements.


Item Type:Article
Copyright:© 2011 IOP Publishing
Faculty:
Science and Technology (TNW)
Engineering Technology (CTW)
Research Group:
Link to this item:http://purl.utwente.nl/publications/78750
Official URL:http://dx.doi.org/10.1088/0953-2048/24/6/065012
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page

Metis ID: 280926