Identification of stiffness and damping characteristics of axial air-foil bearings

Share/Save/Bookmark

Arora, Vikas and Hoogt van der, P.J.M. and Aarts, R.G.K.M. and Boer de, A. (2011) Identification of stiffness and damping characteristics of axial air-foil bearings. International Journal of Mechanics and Materials in Design . ISSN 1569-1713

[img]
Preview
PDF
778Kb
Abstract:Air-foil bearings (AFBs) are self acting hydrodynamic bearings made from sheet metal foils comprised of at least two layers. The innermost “top foil” layer traps a gas pressure film that supports a load while the layer or layers underneath provide an elastic foundation. AFBs are currently used in many commercial applications, both terrestrial and in aerospace. AFBs provide a means to eliminate the oil system leading to reduce weight and enhanced temperature capability. Regardless of the application of the AFBs, the identification of the structural characteristics is important for successful design practice. In the present work, structural characteristics (stiffness and damping) of axial AFBs are indentified in the light of experimental results. Due to the initial high torque requirement of the AFB, the experimental setup using a single AFB is proposed instead of standard two-foil bearing setups. Experiments are carried out at maximum speed of 60,000 rpm. Sub-structuring approach is used for identification of the structural (stiffness and damping) characteristics of the AFB. The results have shown that the developed experimental procedure is able to identify the stiffness and damping characteristics of axial AFBs accurately.
Item Type:Article
Copyright:© 2011 The Author(s)
Faculty:
Engineering Technology (CTW)
Research Chair:
Research Group:
Link to this item:http://purl.utwente.nl/publications/77612
Official URL:http://dx.doi.org/10.1007/s10999-011-9161-7
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page

Metis ID: 267495