The brittle-ductile transition temperature of polycarbonate as a function of test speed

Share/Save/Bookmark

Gaymans, R.J. and Hamberg, M.J.J. and Inberg, J.P.F. (2000) The brittle-ductile transition temperature of polycarbonate as a function of test speed. Polymer Engineering and Science, 40 (1). pp. 256-262. ISSN 0032-3888

[img] PDF
Restricted to UT campus only
: Request a copy
566kB
Abstract:The fracture behavior of polycarbonate was studied as a function of temperature (-80°C to +80°C) and test speed (10-5 to 10 m/s) using an instrumented, singleedged, notched tensile test (SENT). SENT tests give information on the fracture stress, fracture displacements, and fracture energies of polycarbonate, and from these data the average crack speeds were calculated and the brittle-ductile transitions were determined. The fracture stress and the fracture energies of ductile fracturing samples increased with increasing test speed. The fracture surfaces were studied by scanning electron analysis, and sometimes a mixed mode fracture, part ductile and part brittle, could be seen. At high test speeds, a sharp brittle-ductile transition was observed, while at low test speeds the transition was more gradual, via a mixed mode region. This mixed mode region decreased in size with increasing test speed and was absent at the higher test speeds. The average crack speeds in the ductile region were directly related to the test speeds. The brittle-ductile transition temperature increased with the logarithmic of the test speed.
Item Type:Article
Copyright:© 2000 Wiley InterScience
Research Group:
Link to this item:http://purl.utwente.nl/publications/71570
Official URL:http://dx.doi.org/10.1002/pen.11158
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page

Metis ID: 106576