Grain-Size Dependence of Sliding Wear in Tetragonal Zirconia Polycrystals

Share/Save/Bookmark

He, Yingjie and Winnubst, Louis and Burggraaf, Anthonie J. and Verweij, Henk (1996) Grain-Size Dependence of Sliding Wear in Tetragonal Zirconia Polycrystals. Journal of the American Ceramic Society, 79 (12). pp. 3090-3096. ISSN 0002-7820

open access
[img]
Preview
PDF
11MB
Abstract:Using a pin-on-plate tribometer with the reciprocating motion of SiC against yttria-doped tetragonal zirconia polycrystal (Y-TZP) plates, the friction and wear of Y-TZP ceramics were investigated as a function of grain size in dry N2 at room temperature. The results showed that the overall wear resistance increased as the grain size of Y-TZP ceramics decreased. For grain sizes ≤0.7 μm, the wear results revealed a Hall-Petch type of relationship (d−1/2) between wear resistance and grain size. In this case, the main wear mechanisms were plastic deformation and microcracking. For grain sizes ≥0.9 μm, the wear resistance was proportional to the reciprocal of the grain diameter. In this regime, delamination and accompanying grain pullout were the main mechanisms. In this case, the phase transformation to monoclinic zirconia had a negative effect on the wear resistance of TZP ceramics. The coefficient of friction tended to be higher for fine-grained TZP-SiC couples than for coarse-grained TZP-SiC couples, whereas, for a specific regime of grain size, the coefficient of friction was almost independent of the grain size.
Item Type:Article
Copyright:© 1996 Wiley InterScience
Faculty:
Science and Technology (TNW)
Research Group:
Link to this item:http://purl.utwente.nl/publications/71222
Official URL:http://dx.doi.org/10.1111/j.1151-2916.1996.tb08081.x
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page

Metis ID: 106475