Low-Temperature Sinter Forging of Nanostructured Y-TZP and YCe-TZP

Share/Save/Bookmark

Boutz, Michel M.R. and Winnubst, Louis and Burggraaf, Anthonie J. and Naue, Marco and Carry, Claude (1995) Low-Temperature Sinter Forging of Nanostructured Y-TZP and YCe-TZP. Journal of the American Ceramic Society, 78 (1). pp. 121-128. ISSN 0002-7820

open access
[img]
Preview
PDF
15MB
Abstract:Compacts of ultrafine Y-TZP and YCe-TZP powders have been sinter forged under constant load at low temperatures (1100°–1200°C). The application of a uniaxial load leads to a strong reduction in sintering time, which in combination with the virtual absence of dynamic grain growth makes it possible to effectively limit grain growth. Nanostructured (grain size 100 nm) TZP with high relative densities (90%-93%) could thus be produced by sinter forging under 84 MPa at 1100°C. The contributions of both creep and densification to the dimensional changes of the sinter-forging samples have been analyzed. A strong reduction of the flaw concentration was observed in sinter-forged materials as compared to freely sintered ones.
Item Type:Article
Copyright:© 1995 Wiley InterScience
Faculty:
Science and Technology (TNW)
Research Group:
Link to this item:http://purl.utwente.nl/publications/71174
Official URL:http://dx.doi.org/10.1111/j.1151-2916.1995.tb08370.x
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page

Metis ID: 106444