Influence of tube and particle diameter on heat transport in packed beds

Share/Save/Bookmark

Borkink, J.G.H. and Westerterp, K.R. (1992) Influence of tube and particle diameter on heat transport in packed beds. AIChE Journal, 38 (5). pp. 703-715. ISSN 0001-1541

[img]
Preview
PDF
1128Kb
Abstract:Influence of the tube and particle diameter and shape, as well as their ratio, on the radial heat transport in packed beds has been studied. Heat transport experiments were performed with four different packings in three wall-cooled tubes, which differed in inner diameter only. Experimental values for the effective radial heat conductivity and wall heat-transfer coefficient for the pseudo-homogeneous two-dimensional model and the overall heat-transfer coefficient for the one-dimensional model are presented. Values were obtained for glass spheres, alumina cylinders, and alumina Raschig rings. The effective radial heat conductivity and wall heat-transfer coefficient can both be correlated as a linear function of the gas flow rate. The Bodenstein number for heat at fully developed turbulent flow is influenced strongly by the shape of the packing: 10.9 for glass spheres, 7.6 for alumina cylinders, and 4.2 for alumina Raschig rings. For the same packing, no significant influence is found of the tube diameter on the effective radial heat conductivity or on the wall heat-transfer coefficient. The overall heat-transfer coefficient can be described very well by the so-called lump equation, which gives the relations among the overall heat-transfer coefficient, effective radial heat conductivity, and wall heat-transfer coefficient. The lump factor, as used in the lump equation, has a best-fit experimental value of 7.4.
Item Type:Article
Copyright:© 1992 Wiley InterScience
Research Group:
Link to this item:http://purl.utwente.nl/publications/70989
Official URL:http://dx.doi.org/10.1002/aic.690380507
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page

Metis ID: 105839