Numerical Simulation of Stresses due to Solid State Transformations : The Simulation of Laser Hardening


Share/Save/Bookmark

Geijselaers, H.J.M. (2003) Numerical Simulation of Stresses due to Solid State Transformations : The Simulation of Laser Hardening. thesis.

open access
[img]
Preview
PDF
2MB
Abstract:The properties of many engineeringmaterialsmay be favourablymodified by application of
a suitable heat treatment. Examples are precipitation hardening, tempering and annealing.
One of the most important treatments is the transformation hardening of steel. Steel is an
alloy of iron and carbon. At room temperature the sollubility of carbon in steel is negligible.
The carbon seggregates as cementite (Fe3C). By heating the steel above austenization
temperature a crystal structure is obtained in which the carbon does solve. When cooled
fast the carbon cannot seggregate. The resulting structure, martensite is very hard and also
has good corrosion resistance.
Traditionally harding is done by first heating the whole workpiece in an oven and then
quenching it in air, oil or water. Other methods such as laser hardening and induction
hardening are charaterized by a very localized heat input. The quenching is achieved by
thermal conduction to the cold bulk material. A critical factor in these processes is the time
required for the carbon to dissolve and homogenize in the austenite.
This thesis consists of two parts. In the first part algorithms and methods are developed
for simulating phase transformations and the stresses which are generated by inhomogeneous
temperature and phase distributions. In particular the integration of the constitutive
equations at large time increments is explored. The interactions between temperatures,
stresses and phase transformations are cast into constitutive models which are suitable for
implementation into a finite element model.
The second part is concerned with simulation of steady state laser hardening. Two
different methods are elaborated, the Arbtrary Lagrangian Eulerian (ALE) method and a
direct steady state method. In the ALE method a transient calculation is prolonged until
a steady state is reached. An improvement of the convection algorithm enables to obtain
accurate results within acceptable calculation times.
In the steady state method the steadiness of the process is directly incorporated into
the integration of the constitutive equations. It is a simplified version of a method recently
published in the literature. It works well for calculation of temperatures and phase distributions.
When applied to the computation of distortions and stresses, the convergence of the
method is not yet satisfactory.
ix
Item Type:Thesis
Faculty:
Engineering Technology (CTW)
Research Chair:
Research Group:
Link to this item:http://purl.utwente.nl/publications/59426
Official URL:http://doc.utwente.nl/59426
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page