Influence of Stress and Chemical Homogeneity on Dielectric Properties of BaTi0.9Zr0.1O3

Share/Save/Bookmark

Gijp van der, Sven and Elshof ten, Johan E. and Steigelmann, Oliver and Verweij, Henk (2000) Influence of Stress and Chemical Homogeneity on Dielectric Properties of BaTi0.9Zr0.1O3. Journal of the American Ceramic Society, 83 (10). pp. 2610-2612. ISSN 0002-7820

[img]PDF
Restricted to UT campus only
: Request a copy
68Kb
Abstract:The influence of mechanical stress and chemical homogeneity on the permittivity of BaTi0.9Zr0.1O3 ceramics prepared from mixed-oxide and hydrothermal powders was studied. To reduce stress, liquid-phase sintering was applied in conjunction with a low heating rate to stimulate the formation of large grains. The influence of chemical homogeneity was studied by variations in sintering temperatures and times. For both types of ceramics, the dielectric constant at the Curie temperature was influenced by both factors, but to a different extent. In the mixed oxide ceramic, chemical homogeneity played a more prominent role, while internal stress appeared to exert a larger influence in the hydrothermal ceramics. The dielectric constant at the Curie temperature could be increased by 5%–10% by an annealing treatment at 200°C, followed by slow cooling.
Item Type:Article
Copyright:© 2000 Blackwell
Faculty:
Science and Technology (TNW)
Research Group:
Link to this item:http://purl.utwente.nl/publications/58431
Official URL:http://dx.doi.org/10.1111/j.1151-2916.2000.tb01597.x
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page

Metis ID: 105422