Modelling of packed bed membrane reactors for autothermal production of ultrapure hydrogen

Share/Save/Bookmark

Tiemersma, T.P. and Patil, C.S. and Sint Annaland van, M. and Kuipers, J.A.M. (2006) Modelling of packed bed membrane reactors for autothermal production of ultrapure hydrogen. Chemical Engineering Science, 61 (5). pp. 1602-1616. ISSN 0009-2509

[img]PDF
Restricted to UT campus only
: Request a copy
1241Kb
Abstract:The conceptual feasibility of a packed bed membrane reactor for the autothermal reforming (ATR) of methane for the production of ultrapure hydrogen was investigated. By integrating H2 permselective Pd-based membranes under autothermal conditions, a high degree of process integration and intensification can be accomplished which is particularly interesting for small scale H2 production units. A two-dimensional pseudo-homogeneous packed bed membrane reactor model was developed that solves the continuity and momentum equations and the component mass and energy balances. In adiabatic operation, autothermal operation can be achieved; however, large axial temperature excursions were seen at the reactor inlet, which are disadvantageous for membrane life and catalyst performance. Different operation modes, such as cooling the reactor wall with sweep gas or distributive feeding of O2 along the reactor length to moderate the temperature profile, are evaluated. The concentration polarisation because of the selective hydrogen removal along the membrane length was found to become significant with increasing membrane permeability thereby constraining the reactor design. To decrease the negative effects of mass transfer limitations to the membrane wall, a small membrane tube diameter needs to be selected. For a relatively small ratio of the membrane tube diameter to the particle diameter, the porosity profile needs to be taken into account to prevent overestimation of the H2 removal rate. It is concluded that autothermal production of H2 in a PBMR is feasible, provided that the membranes are positioned outside the inlet region with large temperature gradients.
Item Type:Article
Copyright:© 2006 Elsevier
Faculty:
Science and Technology (TNW)
Research Group:
Link to this item:http://purl.utwente.nl/publications/57980
Official URL:http://dx.doi.org/10.1016/j.ces.2005.10.004
Export this item as:BibTeX
EndNote
HTML Citation
Reference Manager

 

Repository Staff Only: item control page

Metis ID: 236170