Requirements and benefits of flow forecasting for improving hydropower generation
Dong, X. and Dohmen-Janssen, C.M. and Booij, M.J. and Hulscher, S.J.M.H. (2005) Requirements and benefits of flow forecasting for improving hydropower generation. In: International Symposium of Stochastic Hydraulics, ISSH, 23-24 May 2005, Nijmegen, The Netherlands.
|Abstract:||This paper presents a methodology to identify the required lead time and accuracy of flow
forecasting for improving hydropower generation of a reservoir, by simulating the benefits (in terms of electricity
generated) obtained from the forecasting with varying lead times and accuracies. The benefit-lead time
relationship was investigated only for perfect inflow forecasts, with a few selected forecasting lead times: 4,
10 days and 1 year. The water level and the release from the reservoir were then optimized. Based on the optimization
results, the “threshold” lead time was identified, beyond which, further extension of the forecasting
lead time will not benefit significantly. In order to investigate the benefit-accuracy relationship, the forecasting
lead time was fixed to be 4 days, and the stochastic nature of the inflow was considered by means of generating
noised synthesized inflow series for optimization. Noised inflow series were generated to mimic the
flow forecasting with different levels of accuracy. These synthesized flow forecasting series served as input
into the optimization model to simulate the benefits. The optimization model consists of two discretized deterministic
dynamic programming (DDDP) models, one for long-term (monthly) and one for the short-term
(daily) optimization. They were coupled together so that both short-term benefits (in a time horizon of flow
forecasting lead time) and long-term benefits (in a time horizon of one year) were considered and balanced.
The Qingjiang river in China and a reservoir on its main channel were taken as case study. The results revealed
that the “threshold” lead time is about 30 days. A perfect inflow forecasting with 4 days lead time will
realize 86% of the theoretical maximum electricity generated in one year. For inflow forecasting with a fixed
lead time of 4 days and different forecasting accuracies, the benefits can increase by 3 to 11% (which is quite
substantial) compared to the actual operation benefits. It is concluded that the definition of the appropriate
lead time will depend mainly on the physical conditions of the basin and on the characteristics of the reservoir.
The derived threshold lead time (about 30 days) is not feasible with the present flow forecasting techniques,
but gives a theoretical upper limit for the extension of forecasting lead time. Criteria for the appropriate
forecasting accuracy for a specific feasible lead-time should be defined from the benefit-accuracy
relationship, starting from setting a preferred benefit level, in terms of percentage of the theoretical maximum.
Inflow forecasting with a higher accuracy does not always increase the benefits, because these also depend on
the operation strategies of the reservoir.
|Item Type:||Conference or Workshop Item|
Engineering Technology (CTW)
|Link to this item:||http://purl.utwente.nl/publications/49945|
|Export this item as:||BibTeX|
Daily downloads in the past month
Monthly downloads in the past 12 months
Repository Staff Only: item control page
Metis ID: 222961