Accelerated plasticization of thin-film composite membranes used in gas separation


Wessling, M. and Lidon Lopez, M. and Strathmann, H. (2001) Accelerated plasticization of thin-film composite membranes used in gas separation. Separation and Purification Technology, 24 (1-2). pp. 223-233. ISSN 1383-5866

[img] PDF
Restricted to UT campus only
: Request a copy
Abstract:Permeation experiments with He, N2, O2 and CO2, have been carried out with double layer composite membranes consisting of a silicone rubber support layer and a thin polyimide layer determining the permeation properties. The estimated thickness of the polyimide layer in the composite membranes was between 1.5 and 4 microns. This paper describes the phenomenon of accelerated plasticization of such thin polyimide layers used in gas separation membranes. The pressure-normalized fluxes were determined at 5 bars for N2, O2 and in the range of 1¿8 bars in the case of He and CO2. Helium permeation decreased with increasing feed pressure and no hysteresis behavior was found for successive increasing and decreasing feed pressure steps. For CO2, the pressure-normalized flux did not follow the typical behavior of glassy polymers but increased continuously with increasing feed pressure. Also, CO2 permeation showed a clear hysteresis effects resulting in an increasing permeability with time and an elevated magnitude in successive decreasing feed pressure steps. Hence, stronger plasticization effects in the composite membranes must be concluded in comparison with thick single film membranes. The plasticization effects are significantly pronounced as the polyimide concentration in the solution from which the membranes are cast become more dilute. The latter is interpreted as accelerated plasticization with decreasing film thickness.
Item Type:Article
Copyright:© 2001 Elsevier Science B.V.
Science and Technology (TNW)
Research Group:
Link to this item:
Official URL:
Export this item as:BibTeX
HTML Citation
Reference Manager


Repository Staff Only: item control page

Metis ID: 202442