Homogeneity and accuracy of the second critical field Bc2 of the NIST SRM-1457 standard NbTi/Cu wire
Haken ten, Bennie and Krooshoop, Erik and Kate ten, Herman H.J. (1994) Homogeneity and accuracy of the second critical field Bc2 of the NIST SRM-1457 standard NbTi/Cu wire. Cryogenics, 34 (suppl.). pp. 583-586. ISSN 0011-2275
| PDF 305Kb |
| Abstract: | In the frame work of the VAMAS intercomparison activities the second critical field Bc2 of the standard KIST NbTi/Cu superconductor was investigated in several laboratories in the world. In this paper the specific results obtained in the UT laboratory are reported. On a single piece of wire of 1.5 meter length the voltage is measured across 10 straight (crossing the magnet axis) and 10 bend sections (on radius 25 mm in the magnet bore). A detailed analysis of all possible errors in field, temperature and voltage is presented. The bend sections provide the best results. As a characteristic result we mention a Bc2 (at 50%) at 4.2 K of 11.31 T with an error of 10 mT only. The variation in Bc2 over the sections is about the same as the variation found for various runs of the same section. The Bc2-homogeneity of the wire over a length of 1.5 meter is extremely good (<10¿3). This accuracy is such that the Bc2 of the standard wire could be used as a field calibrating method. |
| Item Type: | Article |
| Copyright: | © 1994 Elsevier Science |
| Faculty: | Science and Technology (TNW) |
| Research Group: | |
| Link to this item: | http://purl.utwente.nl/publications/23791 |
| Official URL: | http://dx.doi.org/10.1016/S0011-2275(05)80136-5 |
| Export this item as: | BibTeX EndNote HTML Citation Reference Manager |
Repository Staff Only: item control page
Metis ID: 128590

Show download statistics for this publication
Show download statistics for this publication